Scribd
Upload
230 views2 pages

1

The PSD 52 is a small-scale single-stage spray dryer designed for scientific test work, industrial R&D, and small-scale production. It has been supplied to over 700 customers worldwide. The dryer features flexibility, modern process control, and produces scalable results. Liquid feed is atomized and dried in a counter-current drying chamber by hot process air before the powder is collected in a cyclone. The PSD 52 is Anhydro's smallest and most versatile spray dryer.

Uploaded by

alejodany
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
230 views2 pages

1

The PSD 52 is a small-scale single-stage spray dryer designed for scientific test work, industrial R&D, and small-scale production. It has been supplied to over 700 customers worldwide. The dryer features flexibility, modern process control, and produces scalable results. Liquid feed is atomized and dried in a counter-current drying chamber by hot process air before the powder is collected in a cyclone. The PSD 52 is Anhydro's smallest and most versatile spray dryer.

Uploaded by

alejodany
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Anhydro Small Scale Spray Dryer

Type PSD 52
The PSD 52 is the smallest single
stage Spray Dryer in the Small
Scale Plants range and is designed for scientific test work,
industrial R&D, as well as for
small scale production.
Equipment Supply, Basic Plant
Feed tank and feed pipe
Two-fluid nozzle atomizer,
counter-current
Air intake filter, electrical air
heater for main air, and hot
air duct
Drying chamber, complete with
rupture disk for EX-protection
Cyclone with powder container
Fan and ducts
Control panel with PLC, graphical soft-touch colour screen
and data-logging facility
Support structure
Optional Equipment
Peristaltic feed pump
Two fluid nozzle co-current
Centrifugal atomizer
Additional powder container
Vent duct
Q-pipe
Pneumatic hammers
Two point discharge
Rotary valve
Cartridge filter
Tank Cleaner
Simple ICS
Noise attenuation
Other Versions
Closed Circuit version
Tall Form version

Type PSD 52
The PSD 52 has been supplied to over
700 private companies, R & D institutions
and Universities worldwide. It is ideal for
product development and even small-scale
production. This dryer features flexibility,
modern process control and produces scalable process results.

The liquid product is fed to the atomizer system where it is dispersed into a mist of fine
droplets in the drying chamber.

Water Evaporation Capacity

In the drying chamber the atomized liquid is


closely mixed with the drying air causing the
droplets to dry out.



!DDITIONAL(EATER

3TANDARD(EATER



Technical data

Process Design Data

The electrically heated process air is introduced into the chamber through a ceiling
mounted air distributor.

Max. inlet air temp.

350C

Max. outlet air temp.

150C

Max. Water evaporation


temperature
(ti/to 350/80)
10 kg/h

Maximum air rate

Power Supply (standard)


Voltage

Frequency



The powdered particles and drying air are


ducted to a cyclone where the powder is collected and the spent drying air is exhausted
through an exhaust air duct.







150 kg/h

3 x 400 V
50 Hz

Materials

Product Contact Parts

AISI 316

External surfaces and


support structure

AISI 304

Fan

spec.alu.alloy

Installed power

Electrical air heater

Exhaust fan

1 kW

Feed pump

0,25 kW

12 kW

Compressed air consumption


INLETAIR

FILTER

ELECTRIC
AIRHEATER

AIROUTLET

AIRDISTRIBUTOR

Two fluid nozzle


atomiser

Bag filter

DRYINGCHAMBER

1-3 Nm3/h

Safety

CYCLONE



5-18 Nm3/h

       



SUCTION



With rupture disk,

max Kst values up to 300 bar*m/s

FAN

FEEDVAT
COMPRESSED
AIR

Noise emission

Basic plant

80 dB(A)

Pneumatic hammer
(option)

95 dB(C)

Space Requirements

INSTRUMENTPANEL

Width x depth

Height

1.9 x 1.35 m

Recommended free height 4 m

NOZZLEATOMIZER
POWDERDISCHARGE

Anhydro A/S

Oestmarken 7
DK-2860 Soeborg

Tel: +45 70 278 222


Fax: +45 70 278 223

www.anhydro.com
[email protected]

2.4 m

You might also like