Scribd
Upload
326 views4 pages

Electrical Fundamental Practical DC Genarator

This report examines and tests the condition of a DC generator. The objective is to identify the main parts of the DC generator and their functions, and to inspect the generator to determine if it is in good working condition. The tools used include a multimeter, growler, and hacksaw blade. The inspection finds that the field windings, armature windings, carbon brushes, yoke, commutators, salient poles, end assembly, and armature core are all in excellent condition with no damage or issues, indicating the DC generator is fit for use in aircraft. Proper inspection of generators is important to ensure they can work properly.

Uploaded by

Ezzul Helmi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
326 views4 pages

Electrical Fundamental Practical DC Genarator

This report examines and tests the condition of a DC generator. The objective is to identify the main parts of the DC generator and their functions, and to inspect the generator to determine if it is in good working condition. The tools used include a multimeter, growler, and hacksaw blade. The inspection finds that the field windings, armature windings, carbon brushes, yoke, commutators, salient poles, end assembly, and armature core are all in excellent condition with no damage or issues, indicating the DC generator is fit for use in aircraft. Proper inspection of generators is important to ensure they can work properly.

Uploaded by

Ezzul Helmi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

UNIVERSITI KUALA LUMPUR

MALAYSIAN INSTITUTE OF AVIATION TECHNOLOGY

ELECTRICAL FUNDAMENTAL 2

AKD10203
DC MOTOR AND GENERATOR REPORT
PREPARED BY:
EZZUL HELMI BIN MOHD YUSOF 53106114095
ISWAN ALIFI BIN AZILAN 53106114171
2 AEM 2
SUBMISSION DATE: 2/04/2015
PREPARED FOR:
MADAM SAHZILAWATI MOHAMAD NOR

SEMESTER JULY 2014

INTRODUCTION

A rotating electric machine which delivers a unidirectional


voltage and current. An armature winding mounted on the
rotor supplies the electricpower output. One or more field
windings mounted on the stator establish the magnetic flu
x in the air gap. A voltage is induced in thearmature coils
as a result of the relative motion between the coils and th
e air gap flux. Faraday's law states that the voltage induce
d isdetermined by the time rate of change of flux linkages
with the winding. Since these induced voltages are alterna
ting, a means of rectificationis necessary to deliver direct
current at the generator terminals. Rectification is accomp
lished by a commutator mounted on the rotor shaft.Carbo
n brushes, insulated from the machine frame and secured
in brush holders, transfer the armature current from the r
otating commutatorto the external circuit.This report is to
examine and test the generator condition.
OBJECTIVE
This is report to identify some parts and the function of
the dc generator.The main part of dc generator that
student should know is the yoke,field winding,salient
poles,both the end assy,the commutators,the armature
windings and the armature core.This practical also teach
student how to inspect and method to inspect the dc
generator.This will make sure student will now the
condition of the dc generator that it is in good condition or
bad condition.
SAFETY PRECAUTION
Student must always: Wear proper workshop etire such as,safety boot,
workshop jacket and proper pants.
Must always wait and follow the instruction from the
instructor.

Do not play with all the probes.Especially with the


growler probes that generate electric.
Take care all the instrument properly.
Make sure follow the correct procedure when doing
the inspection
TOOLS AND EQUIPMENT
Set of dc generator
A multimeter to check continuity and short circuit
The growler to test armature
Hacksaw blade to check short circuit
Conclusion
The yoke is ok, field winding ok,salient poles ok,both
the end assy ok,the commutators ok,armature windings
ok and the armature core also ok.The dc generator part
that my group inspected is working in very good
condition.The dc generator is very fits and can installed
in aircraft anytime.The inspection must be done to make
sure the dc generator can work properly.

PARTS

INSPECTION/METH
ODS

RESULTS

Field Windings

Check for burn and


pitting
Virtual check on the
condition of the
winding
Virtual check and
measure the
thickness of the
carbon brush
Virtual check the
yoke.check for any
corrosion and burnt
mark
Virtual check.look for
any
damages,overheating

No burn mark.

Armature winding

Carbon brush
assembly

Yoke

The commutators

Salient poles
Both the end assy
Armature core

The winding found


to be in excellent
condition
All in normal
condition

No corrosion. No
burn mark

You might also like