Scribd
Upload
148 views

Acm8r PDF

ACM-8R is a module in the Notifier ACS class of annunciators. It provides the NFS2-3030, NFS-320, NFS2-640 and NCA-2, Fire Alarm Control Panels with a mappable relay control module. The relays can be employed to track a variety of devices and panel points, in a grouped fashion.

Uploaded by

Haroldo Ramos
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
148 views

Acm8r PDF

ACM-8R is a module in the Notifier ACS class of annunciators. It provides the NFS2-3030, NFS-320, NFS2-640 and NCA-2, Fire Alarm Control Panels with a mappable relay control module. The relays can be employed to track a variety of devices and panel points, in a grouped fashion.

Uploaded by

Haroldo Ramos
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DN-3558:a1 D-102

ACM-8R
Relay Module
Annunciator Control Systems

General
The ACM-8R is a module in the Notifier ACS class of annunciators. It provides the NFS2-3030, NFS-320, NFS2-640 and NCA-2,
Fire Alarm Control Panels with a mappable relay control module.

Features
Provides eight Form-C relays with 5-amp contacts.
The relays can be employed to track a variety of devices and
panel points, in a grouped fashion.
Removable terminal blocks for ease of installation and service.
DIP switch selectable memory mapping of relays.
NOTE: The ACM-8R can also be used with legacy panels. Please
refer to the ACM-8R manual (document 15382).

Mounting
3558acm8.wmf

The ACM-8R module will mount to CHS-4 chassis, a CHS-4L


low-profile chassis (assumes one of four positions on the chassis), or CHS-4MB; or for remote applications, to an ABS-8RB
Annunciator Surface-mount backbox with blank faceplate.

Limits

ACM-8R Relay Module

The ACM-8R is a member of the Notifier ACS class of annunciators. Up to 32 annunciators (not including expander modules)
may be installed on an EIA-485 circuit.

NFS2-3030, NFS2-640 AND NFS-320 CIRCUITS

Wire Runs
Communication between the control panel and the ACM-8R is
accomplished over a two-wire EIA-485 serial interface. This
communication, to include the wiring, is supervised by the fire
alarm control panel. Power for the annunciators is provided via
a separate power loop from the control panel, which is inherently supervised (loss of power also results in a communication
failure at the control panel).

Relay Mapping
The ACM-8Rs relays can follow the status of initiating and indicating circuits, control relays, and several system control functions.

The ACM-8R can track a variety of input, output, panel functions, and addressable devices in a grouped fashion on the
AFP-300/400. The ACM-8R can track:

CPU status
Soft zones
Special hazard zones.
Addressable circuits
Power supply NACs.
Selectable points (NFS2-640 and NFS-320) when tracking
special annunciator points.

Agency Listings and Approvals


These listings and approvals apply to the modules specified in
this document. In some cases, certain modules or applications
may not be listed by certain approval agencies, or listing may
be in process. Consult factory for latest listing status.

UL Listed: S635
ULC Listed: CS635 Vol. I
MEA Listed:104-93-E Vol. 6; 17-96-E; 291-91-E Vol. 3
FM Approved:
CSFM: 7120-0028:156
FDNY: #6039

Relay Terminal Assignments


The ACM-8R provices eight relays with Form C contacts rated
for 5 A. The terminal assignments are illustrated below.

DN-3558:a1 01/19/10 Page 1 of 2

5 or
} Relay
Trouble Relay 1
6 or
} Relay
Trouble Relay 2
7 or
} Relay
Trouble Relay 3
8 or
} Relay
Trouble Relay 4

{
Relay 3 {
Relay 2 {
Relay 1 {

3558acm8.wmf

5155abs.wmf

Relay 4

The ABS-8RB
NOTE: Circuits can be annunciated as
alarm, or alarm and trouble. Alarm and trouble consumes two annunciator points.

9.94H x 4.63W x 2.50D


252.5mm(H) x 117.6mm(W) x 63.5mm(D)

NOTIFIER is a registered trademark of Honeywell International Inc.


2006 by Honeywell International Inc. All rights reserved. Unauthorized use
of this document is strictly prohibited.

This document is not intended to be used for installation purposes.


We try to keep our product information up-to-date and accurate.
We cannot cover all specific applications or anticipate all requirements.
All specifications are subject to change without notice.
Made in the U.S. A.

For more information, contact Notifier. Phone: (203) 484-7161, FAX: (203) 484-7118.
www.notifier.com
Page 2 of 2 DN-3558:a1 01/19/10

You might also like