Design of Corporate
Communication Systems
Design Principles and Requirements
LAN WAN Technologies
Design science includes:
Understanding the existing structure
Understanding the requirements
Understanding how the features operate
What are the constraints
What are the alternative approaches
CT020-3-3 Design of Corporate Communication Systems
Waterfall Cycle
Work flows down from one stage into the
next.
Each stage
must be
completed
before the
next stage
can begin.
CT020-3-3 Design of Corporate Communication Systems
Spiral Cycle
Can adapt to new requirements by looping
through all stages several times.
CT020-3-3 Design of Corporate Communication Systems
Design Principles
Plan phase: The detailed network requirements
are identified, and the existing network is
reviewed.
Design phase: The network is designed according
to the initial requirements and additional data
gathered during analysis of the existing network.
The design is refined with the client.
Implement phase: The network is built according
to the approved design.
CT020-3-3 Design of Corporate Communication Systems
Design Principles (Cont.)
Operate phase: The network is operational
and is being monitored. This phase is the
ultimate test of the design.
Optimize phase: During this phase, issues are
detected and corrected, either before
problems arise or, if no problems are found,
after a failure has occurred. Redesign might be
required if too many problems exist.
CT020-3-3 Design of Corporate Communication Systems
Network Design Process
1. Requirements Gathering
2. Analysis of the Existing Network
3. Logical Design (also referred to as Conceptual
Design)
4. Physical Design (also referred to as Final Design)
5. Installation and Maintenance
CT020-3-3 Design of Corporate Communication Systems
Requirements Gathering
This is the most crucial phase in the development
process, because requirements provide the target
your network design must hit.
Better view of current network
Objective decision-making
Ability to plan for network migration
Ability to deliver appropriate resources to all users
CT020-3-3 Design of Corporate Communication Systems
Analysis of the Existing Network
The Analysis phase complements the Requirements Gathering
phase; requirements show you where you need to be, and
analysis tells you where you currently are.
A thorough analysis should gather both qualitative
information (such as user estimates of storage and traffic) and
quantitative data (such as traffic measurements and network
management statistics)
CT020-3-3 Design of Corporate Communication Systems
Analysis phase deliverables
1. Logical diagram of the current topology
2. Estimated traffic volumes and patterns that describe the
network capacity required for each application, each
network segment, and the network as a whole
3. Detailed statistics, baseline measurements, and any other
direct measurements that describe the network's current
level of performance
4. A report on the quality of service provided by suppliers of
Internet connections or wide area network (WAN) links
5. A list of design constraints, such as the need to use existing
cabling or devices
CT020-3-3 Design of Corporate Communication Systems
10
Logical Design
The Logical Design describes what the network
must do, and how it must perform, to meet the
requirements.
Logical network diagrams
Addressing strategy
Security scheme
Specification of hardware components, software, WAN
links, and general services
Specification of new hires or training for the network staff
Initial cost estimates for hardware, software, services,
personnel, and training
CT020-3-3 Design of Corporate Communication Systems
11
Physical Design
The Physical Design shows how to make the Logical
Design work in the real world.
The network designer creates a detailed specification
of the hardware, software, links, services, and
cabling necessary to implement the Logical Design.
CT020-3-3 Design of Corporate Communication Systems
12
Physical Design Outputs
1. Physical network diagrams and to-scale wiring plans
2. Detailed lists of equipment and parts
3. Cost estimates for hardware, software, and
installation labor
4. Installation schedule that specifies the time and
duration of physical or service disruptions
5. Post-installation testing plan
6. User training plan
CT020-3-3 Design of Corporate Communication Systems
13
Installation and Maintenance
The main output of the Installation phase is the network
itself.
However, a good installation should also produce:
Updated diagrams (logical and physical) that include all lastminute changes
Cabling, connections, and devices that are clearly labeled
Any notes or documents that can simplify later maintenance
or troubleshooting, such as test results or new traffic
measurements
CT020-3-3 Design of Corporate Communication Systems
14
Requirements
Business Requirements
User Requirements
Application Requirements
Computing Platform Requirements
Network Requirements
CT020-3-3 Design of Corporate Communication Systems
15
Network Requirements
In this part of the Requirements Gathering phase,
the existing network is examined to understand its
current topologies, performance, and software. We
also consider other broad requirements that should
be reflected in the new network design.
CT020-3-3 Design of Corporate Communication Systems
16
Types of Network Requirements
LAN functions
Physical topologies
Performance
Networking software
Security
Economy and cost control
Metropolitan area network (MAN) / WAN
options
CT020-3-3 Design of Corporate Communication Systems
17
LAN Functions
A good starting point
is to summarize the
functions necessary
for the LAN to meet
the particular
organizational needs.
CT020-3-3 Design of Corporate Communication Systems
18
Physical Topologies
Networks are physically configured in many different ways,
and a single network typically consists of multiple topologies.
Most organizations will have a diagram of the existing
network, that can
provide some initial
insight into its logical
structure.
CT020-3-3 Design of Corporate Communication Systems
19
Performance
Several performance metrics should
always be considered by the designers,
including:
Capacity and response time
Availability
Recoverability
CT020-3-3 Design of Corporate Communication Systems
20
Networking Software
NOS
Novell's NetWare
Microsoft's NT / 2000/2003/2008 Server
UNIX / Linux
AppleTalk
Backup management and archiving
Virus Protection
Network management
Remote management
CT020-3-3 Design of Corporate Communication Systems
21
Security
All data flowing through networks, or cached
temporarily on network nodes, is at risk.
By identifying the points of greatest network vulnerability,
steps can be taken to protect and monitor those areas for
intrusion.
Network security involves deploying physical
products and operating procedures to protect the
integrity, accessibility, and reliability of networks and
systems
CT020-3-3 Design of Corporate Communication Systems
22
Security (Cont.)
The goal of network security is resource protection.
A secure network can be defined by the following
three attributes:
Confidentiality--Data is kept private.
Integrity--Data cannot be changed without
authorization.
Authenticity--Data, or information about data (such as
a sender's name), cannot be falsified.
CT020-3-3 Design of Corporate Communication Systems
23
Economy and Cost Control
Hardware and software account for approximately 25
percent of the total cost of a network. Therefore, the
design of a network can significantly affect the
budget.
You can have a peer-to-peer LAN for less than half the cost
of a full-scale LAN. However, the peer-to-peer LAN may be
hard to expand.
Peer-to-peer LANs are fine for small offices.
Do not forget to include the cost of user licenses, which
are required for most network operating systems.
CT020-3-3 Design of Corporate Communication Systems
24
Economy and Cost Control
Administration is the biggest hidden cost of a LAN.
Administration of a peer-to-peer NOS is minimal. Most peerto-peer LAN owners rely on their vendor for support, in the
form of a maintenance or service contract.
Be sure your supplier is certified by the manufacturer to service, train,
and support your NOS.
Typically, one full-time support person is needed for every 50
to 75 users. (The range varies dramatically, depending in part
on user skill levels, required availability, topological layout,
and need for internetworking).
CT020-3-3 Design of Corporate Communication Systems
25
WAN / MAN Links
There are many ways to turn LANs into MANs
and WANs.
A MAN uses public transmission facilities but
only covers one city.
A WAN spans multiple sites that are
geographically dispersed, typically using local
and long distance carrier facilities.
CT020-3-3 Design of Corporate Communication Systems
26
WAN / MAN Links (Cont.)
To create MANs and WANs, communication links
must be purchased to connect the remote sites.
Such as bridges, routers, channel service units/data
service units (CSUs/DSUs), and modems are also
necessary, depending on the type of link used.
When using public facilities, two types of links are
available:
Point-to-point circuit-switching services (dial-up lines or
leased lines)
Packet-switching services
CT020-3-3 Design of Corporate Communication Systems
27
