Scribd
Upload
96 views

Linux Booting

The boot process begins when the computer is powered on and the BIOS initializes hardware components. The boot loader then loads and passes control to the Linux kernel. The kernel initializes hardware devices and loads the initial RAM disk containing drivers to access the root file system. Once mounted, the /sbin/init program launches other processes like login prompts. The display manager then loads the X Window System to provide the graphical user interface and desktop environment.

Uploaded by

Priyankar Roychowdhury
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
96 views

Linux Booting

The boot process begins when the computer is powered on and the BIOS initializes hardware components. The boot loader then loads and passes control to the Linux kernel. The kernel initializes hardware devices and loads the initial RAM disk containing drivers to access the root file system. Once mounted, the /sbin/init program launches other processes like login prompts. The display manager then loads the X Window System to provide the graphical user interface and desktop environment.

Uploaded by

Priyankar Roychowdhury
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 7

The Boot Process

Have you ever wondered what happens in the background from the time you press
the Powerbutton until the Linux login prompt appears?
The Linux boot process is the procedure for initializing the system. It consists of
everything that happens from when the computer power is first switched on until the
user interface is fully operational.
Once you start using Linux, you will find that having a good understanding of the
steps in the boot process will help you with troubleshooting problems as well as with
tailoring the computer's performance to your needs.
Click the image to view an enlarged version.

BIOS - The First Step


Starting an x86-based Linux system involves a number of steps. When the
computer is powered on, the Basic Input/Output System (BIOS) initializes the
hardware, including the screen and keyboard, and tests the main memory. This
process is also called POST (Power On Self Test).

The BIOS software is stored on a ROM chip on the motherboard. After this, the
remainder of the boot process is completely controlled by the operating system.

Master Boot Records (MBR) and Boot Loader


Once the POST is completed, the system control passes from the BIOS to the boot
loader. The boot loader is usually stored on one of the hard disks in the system,
either in the boot sector (for traditional BIOS/MBRsystems) or the EFI partition
(for more recent (Unified)Extensible Firmware.
Interface or EFI/UEFI systems). Up to this stage, the machine does not access
any mass storage media. Thereafter, information on the date, time, and the most
important peripherals are loaded from the CMOS values (after a technology used
for the battery-powered memory store - which allows the system to keep track of
the date and time even when it is powered off).
A number of boot loaders exist for Linux; the most common ones
are GRUB (for GRand Unified Boot loader) and ISOLINUX (for booting from
removable media). Most Linux boot loaders can present a user interface for choosing
alternative options for booting Linux, and even other operating systems that might
be installed. When booting Linux, the boot loader is responsible for loading the
kernel image and the initial RAM disk (which contains some critical files and device
drivers needed to start the system) into memory.

Boot Loader in Action


The boot loader has two distinct stages:
First Stage:
For systems using the BIOS/MBR method, the boot loader resides at the first sector
of the hard disk also known as the Master Boot Record (MBR). The size of the
MBR is just 512 bytes. In this stage, the boot loader examines the partition table
and finds a bootable partition. Once it finds a bootable partition, it then searches for
the second stage boot loader e.g, GRUB, and loads it into RAM (Random Access
Memory).
For systems using the EFI/UEFI method, UEFI firmware reads itsBoot
Manager data to determine which UEFI application is to be launched and from
where (i.e., from which disk and partition the EFIpartition can be found). The
firmware then launches the UEFIapplication, for example, GRUB, as defined in the
boot entry in the firmware's boot manager. This procedure is more complicated but
more versatile than the older MBR methods.
Second Stage:
The second stage boot loader resides under /boot. A splash screen is displayed
which allows us to choose which Operating System (OS) to boot. After choosing the
OS, the boot loader loads the kernel of the selected operating system into RAM and
passes control to it.
The boot loader loads the selected kernel image (in the case of Linux) and passes
control to it. Kernels are almost always compressed, so its first job is to uncompress
itself. After this, it will check and analyze the system hardware and initialize any
hardware device drivers built into the kernel.

The Linux Kernel


The boot loader loads both the kernel and an initial RAMbased file system
(initramfs) into memory so it can be used directly
by the kernel.
When the kernel is loaded in RAM, it immediately
initializes and configures the computers memory
and also configures all the hardware attached to the
system. This includes all processors, I/O
subsystems, storage devices, etc. The kernel also
loads some necessary user space applications.

The Initial RAM Disk


The initramfs filesystem image contains programs and binary files that perform all
actions needed to mount the proper root filesystem, like providing kernel
functionality for the needed filesystem and device drivers for mass storage
controllers with a facility called udev (for User Device) which is responsible for
figuring out which devices are present, locating the drivers they need to operate
properly, and loading them. After the root filesystem has been found, it is checked
for errors and mounted.
The mount program instructs the operating system that a filesystem is ready for
use, and associates it with a particular point in the overall hierarchy of the filesystem
(the mount point). If this is successful, the initramfs is cleared from RAM and
theinit program on the root filesystem (/sbin/init) is executed.
init handles the mounting and pivoting over to the final real root filesystem. If
special hardware drivers are needed before the mass storage can be accessed, they
must be in the initramfs image.

/sbin/init and Services


Once the kernel has set up all its hardware and mounted the root filesystem, the
kernel runs the /sbin/init program. This then becomes the initial process, which
then starts other processes to get the system running. Most other processes on the
system trace their origin ultimately to init; the exceptions are kernel processes,
started by the kernel directly for managing
internal operating system details.
Traditionally, this process startup was done using
conventions that date back toSystem V UNIX,
with the system passing through a sequence
ofrunlevels containing collections of scripts that
start and stop services. Each runlevel supports a
different mode of running the system. Within
each runlevel, individual services can be set to
run, or to be shut down if running. Newer
distributions are moving away from the System V
standard, but usually support the System V
conventions for compatibility purposes.
Besides starting the system, init is responsible for keeping the system running and
for shutting it down cleanly. It acts as the "manager of last resort" for all non-kernel
processes, cleaning up after them when necessary, and restarts user login services
as needed when users log in and out.

Text-Mode Login

Near the end of the boot process, init starts a number of text-mode login prompts
(done by a program called getty). These enable you to type your username,
followed by your password, and to eventually get
a command shell.
Usually, the default command shell is bash (the
GNU Bourne Again Shell), but there are a
number of other advanced command shells
available. The shell prints a text prompt,
indicating it is ready to accept commands; after
the user types the command and presses Enter,
the command is executed, and another prompt is
displayed after the command is done.
As you'll learn in the chapter 'Command Line
Operations', the terminals which run the command shells can be accessed using
the ALT key plus a function key. Most distributions start six text terminals and one
graphics terminal starting with F1 or F2. If the graphical environment is also
started, switching to a text console requires pressing CTRL-ALT + the appropriate
function key (with F7 or F1being the GUI). As you'll see shortly, you may need to
run the startx command in order to start or restart your graphical desktop after you
have been in pure text mode.

X Window System
Generally, in a Linux desktop system, the X Window System is loaded as the final
step in the
boot process.
A service
called
the display
manager kee
ps track of the
displays being
provided, and loads the X server (so-called because it provides graphical services to
applications, sometimes called X clients). The display manager also handles
graphical logins, and starts the appropriate desktop environment after a user logs in.

More About the X Window System

A desktop environment consists of a session manager, which starts and maintains


the components of the graphical session, and the window manager, which controls
the placement
and
movement of
windows,
window titlebars, and
controls.
Although
these can be mixed, generally a set of utilities, session manager, and window
manager are used together as a unit, and together provide a seamless desktop
environment.
If the display manager is not started by default in the default runlevel, you can
start X a different way, after logging on to a text-mode console, by
running startx from the command line.

You might also like