Scribd
Upload
160 views

Frequently Asked Questions: Lecture 10 and 11 Hydraulic Motors

Hydraulic motors convert fluid energy into mechanical movement and are commonly used in applications involving heavy loads or high torque requirements. They have several advantages over electric motors, including smaller size, adjustable speed and position control, ability to easily reverse direction, and not requiring a direct connection to an electricity source. Hydraulic motors are classified based on their piston configuration and displacement, and common applications include electric motor coil winding, oil pipeline inspection equipment, undersea camera manipulation, and construction equipment.

Uploaded by

jtoreroc
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
160 views

Frequently Asked Questions: Lecture 10 and 11 Hydraulic Motors

Hydraulic motors convert fluid energy into mechanical movement and are commonly used in applications involving heavy loads or high torque requirements. They have several advantages over electric motors, including smaller size, adjustable speed and position control, ability to easily reverse direction, and not requiring a direct connection to an electricity source. Hydraulic motors are classified based on their piston configuration and displacement, and common applications include electric motor coil winding, oil pipeline inspection equipment, undersea camera manipulation, and construction equipment.

Uploaded by

jtoreroc
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

LECTURE 10 AND 11

HYDRAULIC MOTORS
FREQUENTLY ASKED QUESTIONS
1. Differentiate between hydraulic pump and hydraulic motor

Pump converts mechanical energy provided by prime mover to fluid energy. Hydraulic motor
uses fluid energy and converts it to mechanical movement of the actuators, either rotary or linear.
2. List the advantages of hydraulic motor over electric motor

o Hydraulic motors are indeed smaller at identical power and especially torque. Their speed
and position can be regulated very well, though not as precisely as for electric motors.
Price also was a bit lower because of the inverter.
o When machine stalls due to some snag, direction of the hydraulic motor can be reverered
easily and safe using pressure relief valve. Electric motor would trip or burn out
o Where electric motors, which can deliver only rotational power and must be sized to suit
the load application, hydraulic motors are much smaller in size even when the application
involves heavy loads.
o In a heavy electromechanical system a big electric motor needs to be directly located on
the motion axis which may not be always feasible. It would also require a continuous
supply of electricity usually from an external source.
3. List four important application of hydraulic motor

o
o
o
o
o
o
o
o
o
o
o
o
o
o
o

Electric motor coil winding


Oil pipeline inspection equipment
Undersea camera manipulation
Jumbo jet maintenance jacks
Milling and sawing applications
Dynamite blast hole pump drive
Automatic clamping
Textile washing agitators
Orange peeling machines
Fan drives
Diamond wheel dresser
Drill and tap machine tool
Chicken processing machinery
Conveyor drives
Due to the high torque at low speeds, loaders and other construction equipment use heavy
hydraulic motors to drive the wheels for moving the machines around

o Cooling fans of equipment that already have hydraulic systems. For example a front end
loader or excavator.
o
4. Explain with neat sketch the working of Gear motor

5. Write the classification of Piston motor

Piston motors are classified into following types


According to the piston of the cylinder block and the drive shaft the piston motors are
classified as
o a) Axial piston motors
o b) Radial piston motors
According to the basis of displacement piston motors are classified as
o Fixed displacement piston motors
o Variable displacement piston motors

6. Define volumetric efficiency, mechanical efficiency and overall efficiency of hydraulic motor

7. Why is the actual flow rate required by the hydraulic motor is higher than the theoretical flow
rate

Actual flow rate required by the hydraulic motor is more than theoretical flow rate because of
the fluid frictional losses, losses in pipes, losses in fittings, leakage loss etc.

8. Why is the actual torque output delivered by the hydraulic motor is less than the calculated
theoretical torque
Actual output delivered by the hydraulic motor is less than theoretical torque because of the mechanical
frictional losses like bearing losses etc.
9. List the few applications of semi rotary actuator
o
o
o

Semi actuators are used for lifting, tilting in jigs and fixtures
Partial Opening and closing of door in machine tools
Indexing, swinging and bending in sheet metal applications

10. Where are external gear motor used

External gear motors are used for high speed (4000 RPM) and low torque application. Usually their
capacity is limited to 5-10 kW
o
o
o
o
o

Used in Damper Actuators,


hydraulic fan drive systems for mobile vehicles
Material Handling
Earthmoving machines
Truck and Bus

11. List the advantages of external gear motor


o
o
o

High drive speeds


Compact dimensions and low weight in relation to the power rating
Cost--effective

You might also like