Scribd
Upload
230 views

Pds 4526 em Des 86 r400 Rev02 0 Process Simulation Fundamentals Process Modelling Using Unisim Design

This 2-day course teaches participants how to build, evaluate, and optimize steady-state process flow sheets using UniSim Design simulation software. The course covers the key features of UniSim Design for rapid flowsheet construction and bidirectional calculations. Participants will learn how to customize the workbook interface, perform auxiliary calculations, use templates and sub-flowsheets, and explore different reporting methods. Hands-on workshops using natural gas processing examples apply the skills to any process model. The course is aimed at new engineers, process engineers, plant engineers, and R&D engineers using UniSim Design.

Uploaded by

harde2lah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
230 views

Pds 4526 em Des 86 r400 Rev02 0 Process Simulation Fundamentals Process Modelling Using Unisim Design

This 2-day course teaches participants how to build, evaluate, and optimize steady-state process flow sheets using UniSim Design simulation software. The course covers the key features of UniSim Design for rapid flowsheet construction and bidirectional calculations. Participants will learn how to customize the workbook interface, perform auxiliary calculations, use templates and sub-flowsheets, and explore different reporting methods. Hands-on workshops using natural gas processing examples apply the skills to any process model. The course is aimed at new engineers, process engineers, plant engineers, and R&D engineers using UniSim Design.

Uploaded by

harde2lah
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Process Simulation: Fundamentals - Process

Modelling Using UniSim Design


Course Overview

Prerequisite/Skill Requirements

Course number: PDS-4526

Prerequisite Course (s)

Course length: 2 days


Learn to build, evaluate and optimize steady state process flow
sheets using UniSim Design. Learn techniques and shortcuts for
efficient use of the program.
The course runs over two days. The course is made up of a
series of hands-on workshops using examples from the natural
gas processing industry, although the skills learnt can be applied
to any model. Each workshop is preceded by an Instructorguided discussion and demonstration

Course Benefits

Discover how the key features of UniSim Design allow


rapid flow sheet construction and intuitive, bi-directional
calculations
Use the Workbook and Process Flow Diagram (PFD)
interfaces for quick and effective modeling
Customize the Workbook to track additional stream and
operating parameters
Perform auxiliary calculations using the built-in
Spreadsheet
Investigate how templates and sub-flow sheets can
streamline and organize simulation efforts
Explore different means of reporting results

Course Delivery Options

In-Center Instructor-Led Training

On-Site Instructor-Led Training

Who Should Take This Course?

New engineering graduates/technologists who will be


using UniSim Design in their daily work
Process engineers doing process design and
optimization projects and studies
Plant engineers checking plant performance under
different operating conditions
R&D engineers and researchers using UniSim Design
for process synthesis

This course is aimed at users with limited experience of UniSim


Design.

None

Required Skills and/or Experience

None

Desirable Skills and/or Experience

A background in chemical engineering or industrial


chemistry

Course Topics
The following topics are covered

Getting Started
o Introduction to UniSim Design. Setting up a first
simulation case, flash calculations, utilities and the
workbook

Propane Refrigeration Loop


o Adding and connecting unit operations. Build a
simple flow sheet

Refrigerated Gas Plant


o Build a more complex flow sheet, Heat Exchangers
and Logical unit operations (Balance, Adjust). Case
Studies

NGL Fractionation Plant


o
Distillation columns in UniSim Design

Oil Characterization
o Using UniSim Designs oil environment to
characterize oils

Two Stage Compression


o Use of Recycle unit operation to converge looped
models in steady state
o Use of Simulation Balance Tool to check heat and
material balances
o Use of Pipe Segment Unit operation

Sour Gas Treating with DEA


o Build a simple Contactor & Regenerator model
using the Amines fluid package

Natural Gas Dehydration with TEG


o Build a simple TEG dehydration system

Reporting with UniSim Design


o Explore the different methods of reporting data from
UniSim Design

Additional Training
To increase your knowledge and skills, there are additional
courses available from Automation College.
For more information and registration, visit
www.honeywellprocess.com/en-US/training.

Rev. 102513

You might also like