Technogroovy Systems India Pvt Ltd

[email protected]

311
1

343

309

339
4

Density based traffic signal with remote override in

emmergency: Remote override control of density
based traffic signal by emmergency vehicles like
ambulance,fire brigade etc for getting priority in the
desired direction
Wireless Power Transfer In 3d Space: Wireless power
transfer up to 10 watts in 3 D space using high
frequency from 38 KHz to 40 KHz through tuned circuits
Propller display of message by virtual LEDs:
Microcontroller interfaced LEDs mounted on a single
coloumn of 10 LEDs only displays programed text
message virtually while rotating at high speed based
upon the principle of persitence of vision of eye.
Density Based Auto Traffic Signal Control With Android
Based Remote Override: Remote override control of
density based traffic signal by emmergency vehicles
like ambulance,fire brigade etc for getting priority in
the desired direction through remotely operated
commands to a microcontroller by touch screen based
user friendly GUI on any smart phone with Android
applications

5799

MC
8051

8399

MC
8051

8999

MC
8051

Blue
Tooth

Solar

Robotics

Sensor
based

Communicatio
n
IR, RF

8999

PowerElectronics

GeneralElectronics

Android

Electrical

Embedded

Product
PRICE

Model No.

S.No.

Category

Remote Induction Motor Control By Android

Application With 7 Segment Display: Speed control of
an induction motor such as fans by a triac interfaced
329 microcontroller through remotely operated commands
to it in steps by touch screen based user friendly GUI on
any smart phone with Android applications.
XBEE based remote monitoring of 3 parameters on
transformer / generator health: 3 parameters such as
voltage, current, temperature of a transformer or any
other live equipemnt is monitored remotely over XBEE
312
communication to remote terminal with relay control
board at the receiver end in the event of abnormal
parameters encountered.
Remotely Controlled Android Based Electronic Notice
Board: The microcontroller receives the message for
LCD display through remotely operated commands to it
341 by touch screen based user friendly GUI from any smart
phone with Android applications truly making it a
wireless notice board
Home Automation By Android Application Based
Remote Control: The project is designed to operate
electrical loads using triacs interfaced to a
microcontroller through remotely operated commands
328
to it by touch screen based user friendly GUI on any
smart phone with Android applications for loads home
or office automation for optimum use of energy
Remote Operated Domestic Appliances Control By
Android Application: The project is designed to
operate electrical loads using relays interfaced to a
342 microcontroller through remotely operated commands
to it by touch screen based user friendly GUI on any
smart phone with Android applications.

9199

MC
8051

10099

MC
8051

9799

MC
8051

Blue
Tooth

10099

MC
8051

Blue
Tooth

10099

MC
8051

Blue
Tooth

Blue
Tooth

XBEE

10

11

12

13

14

Remote Ac Power Control By Android Application With

Lcd Display: Based on the principle of firing angle
control of two thyristors connected in anti parallel is fed
for the output from an embedded microcontroller
325
circuit having LCD display . The firing angle is remotely
controlled to get reduced load power in steps by touch
screen based user friendly GUI on any smart phone with
Android applications.
Remote Password Operated Security Control By
Android Applications: The microcontroller based lock
indication is an access control system that allows
authorized persons knowing the password only.
Password is stored in another dedicated EEPROM that
340
can be changed at any time unlike a fixed one burnt
permanently on to the microcontroller through
remotely operated commands to it by touch screen
based user friendly GUI on any smart phone with
Android applications
Four Quadrant Operation Of Dc Motor Remotely
Controlled By Android Applications: The project has
been designed to develop a speed control system for DC
motor in all the four-quadrant. Using four-quadrant
chopper it is possible to demonstrate forward, instant
336
forward brake, reverse, instant reverse brake control of
a DC motor using a microcontroller through remotely
operated commands to it by touch screen based user
friendly GUI on any smart phone with Android
applications.
Password Based Remote Controlled Door Opening By
Android Application: The project is designed to operate
a motor operated door interfaced to a microcontroller
331 through remotely operated commands to it by touch
screen based user friendly GUI on any smart phone with
Android applications.
Remote Speed Control Of Dc Motor By Android
Applications: Speed control of DC motor by varying the
duty cycle of the pulse applied to it (popularly known as
PWM control) through remotely operated commands
327
to the microcontroller in steps by touch screen based
user friendly GUI on any smart phone with Android
applications.

10199

MC
8051

10399

MC
8051

Blue
Tooth

10499

MC
8051

Blue
Tooth

MC
10799 8051

Blue
Tooth

MC
8051

Blue
Tooth

10799

Blue
Tooth

15

16

17

18

Railway Level Crossing Gate Operation Remotely By

Android: Railway level crossing gate motor ,controlled
by the the engine driver from a smart phone to a
microcontroller through remotely operated commands
337
to its by touch screen based user friendly GUI with
Android applications for deriving an output to dive a
relay for the gate motor operation.
Android Application Controlled Remote Robot
Operation: The project is designed to control a robotic
vehicle using motors interfaced to a microcontroller
326 through remotely operated commands to it by touch
screen based user friendly GUI on any smart phone with
Android applications.
Android Based Remotely Programmable Sequential
Load Operation: The project is designed to operate
electrical loads using relays interfaced to a
microcontroller through remotely operated commands
to it by touch screen based user friendly GUI on any
smart phone with Android applications .The touch
338 screen switches operated remotely are used to program
the system in set mode, auto mode or manual mode.
Loads are driven sequentially or individually in
programmable time intervals from the output of the
microcontroller based on the mode selected remotely.
Remote Alignment Of 3d Dish Positioning By Android
Application: The main application of using a dish
antenna to position it to the exact angle by remotely
330 operated commands to it by touch screen based user
friendly GUI from any smart phone with Android
applications.

10799

MC
8051

Blue
Tooth

10199

MC
8051

Blue
Tooth

MC
11199 8051

Blue
Tooth

11699

MC
8051

Blue
Tooth

12699

MC
8051

Blue
Tooth

Metal Detector Robotic Vehicle Operated By Android

Application: The project is designed to control a robotic
vehicle using motors interfaced to a microcontroller
through remotely operated commands to it by touch
19

332 screen based user friendly GUI on any smart phone with
Android applications. It also consists of a metal
detector circuit interfaced to the control unit that
alarms the user behind it about a suspected land mine
ahead.

20

21

22

23

Xbee Based Remote Monitoring Of 3 Parameters On

Transformer / Generator Health With Voice
Announcement And Wireless Pc Interface: 3
parameters such as voltage, current, temperature of a
transformer or any other live equipment is monitored
322 remotely over XBEE communication to remote terminal
with relay control board at the receiver end in the
event of abnormal parameters encountered with
recorded voice announcement and with wireless
computer interface for display.

17099

Vehicle tracking by GPS - GSM: Location tracking of

any vehicle with latitude and longitude details
communicated to the owner over SMS at periodical
310 intervals by a tracking microcontroller duly interfaced
to a GPS module and a GSM modem installed in the
vehicle.

MC
16699 8051

Pick N Place Robotic Arm And Movement Controlled

By Android Wirelessly: The project is designed to
develop a pick n place robotic vehicle with a soft
catching gripper. For example, it can safely handle a
bomb very carefully to avoid explosion while catching.
333
The robotic vehicle 4 motors are interfaced to a
microcontroller through remotely operated commands
to it by touch screen based user friendly GUI on any
smart phone with Android applications.
Fire Fighting Robot Remotely Operated By Android
Applications: The project is designed to develop a fire
fighting robotic vehicle using motors those are
interfaced to a microcontroller through remotely
334 operated commands to it by touch screen based user
friendly GUI on any smart phone with Android
applications. The robotic vehicle is loaded with water
tanker and a pump which is also controlled remotely
too pump the water on the fire.

MC
8051

Xbee

GSM,
GPS

22299

MC
8051

Blue
Tooth

24799

MC
8051

Blue
Tooth

24

25

26

War Field Spying Robot With Night Vision Wireless

Camera By Android Applications: The project is
designed to develop a robotic vehicle using motors
those are interfaced to a microcontroller through
remotely operated commands to it by touch screen
335 based user friendly GUI on any smart phone with
Android applications and with wireless camera for
monitoring purpose. The robot along with camera can
wirelessly transmit real time video with night vision
capabilities. This is kind of robot can be used for spying
purpose in war fields.
Voice Controlled Robotic Vehicle With Long Distance
Speech Recognition: A robotic vehicle that responds to
voice commands with RF mode communication for long
324 distance speech recognition features for movement in
any direction with manual override by switches at the
transmitter end.

317

GSM Based Remote Monitoring of 8 Parameters of

Transformer: GSM based remote monitoring of 8
parameters of transformer / generator health- 8
parameters such as 3 P voltage, 3p current,
temperature, oil chamber moisture / oil level
/vibration(any one of three) etc of distribution

24599

MC
8051

Blue
Tooth

34299

MC
8051

Voice
Modul
e,RF

29199

MC
8051

XBEE

6499

MC
8051

12099

MC
PIC

14799

MC
8051

transformer / generator / other.

27

28

29

344

AC PWM Control for Induction Motor: AC PWM based

Induction motor speed control having negligible
harmonic distortion compared to simple phase angle
delayed mode of control.

Solid State Stabilizer using PIC Mcrocontroller:A new

type of solid state stabilizer using PWM / AC chopper
program on a PIC16F877A microcontroller monitoring
PIC345 cycle by cycle with isolation transformer for
controled output voltage of 220V +_ 1% even if the
input mains voltage varies between 180V and 250V

346

Wireless SCADA: Supervisor sitting on the PC terminal

to control plant parameters wirelessly while
monitoring the data acquired through several sensors.
The project uses a front end for the control and a
backend with microcontroller interfaced to an ADC
from temperature sensors for data collection and
control

USB
2.4GH Tempe
rature
z

30

31

Wirelees rash driving detection: The time difference

between 2 consecutive spots on a highway is sensed &
fed to a programmed microcontroller to convert the
347 same to the speed of a vehicle with display & warning
upon exceeding specified speed limit and transmitting
the same wirelessly to the control room.
Arduino based Auto intensity control of street lights:
White Light Emitting Diodes (LED) replacing HID lamps
in street lighting system with light dimming feature is
348 interfaced to an Arduino board used to develop pulse
width modulated signals that drives a MOSFET to
switch a number of LEDs for controling the intensity.

18999

MC
8051

RF

IR

MC
9299

ATME
GA

32

Arduino based Solar street light: LED based street

lights with auto intensity control using solar power
from photovoltaic cells duly interfaced to an Arduino
350 board. The project stores solar energy in a battery
during day time and automatically operates street
light in evening with varying intensity control to
minimize waste of energy.

33

Arduino Based underground cable fault detection: A

fixed set of resistors are used representing the
distance of the underground cable in kilometers. A DC
351 voltage is fed over the line in mutiplexing mode in
combination with the built-in ADC of an Arduino board
to detect the fault current and show the distance on a
LCD display based on varying voltage drop principle.

10399

MC
ATME
GA

34

Aurdino Based Home Automation: Using Bluetooth

module interfaced an Arduino board is designed for
352 controlling several loads in home or office for
optimum use of energy.

13899

MC
ATME
GA

35

Atmega based garrage door openning: An Anroid OS

based cell phone is used to remotely control a garage
door motor through Bluetooth system connected to a
353 programed Atmega microcontroller so that the data
received with accepted password is used to operate
the relay driving the motor.Wrong password entry
develops a buzzer alarm.

10599

MC
ATME
GA

12299

MC
ATME
GA

Blueto
oth

Bluet
ooth

36

ARM cortex (STM32) based Auto intensity control:

White Light Emitting Diodes (LED) replacing HID lamps
in street lighting system with light dimming feature is
354 interfaced to an ARM cortex (STM32) board used to
develop pulse width modulated signals that drives a
MOSFET to switch a number of LEDs for controling the
intensity.

12599

STM3
2

37

ARM cortex (STM32) based Motor speed control: The

speed of a DC motor is directly proportional to the
voltage applied across its terminals. This project uses
355 the above principle to control the speed of the motor
by varying the duty cycle of the pulse applied to it
(popularly known as PWM control). An ARM cortex
(STM32) board is used to deliver the PWM pulses to

12999

STM3
2

15599

STM3
2

the motor.

38

39

40

ARM cortex (STM32) based Solar street light: LED

based street lights with auto intensity control using
solar power from photovoltaic cells duly interfaced to
356 an ARM cortex (STM32) board. The project stores
solar energy in a battery during day time and
automatically operates street light in evening with
varying intensity control to minimize waste of energy.
RaspberryPI based Auto intensity control: White Light
Emitting Diodes (LED) replacing HID lamps in street
lighting system with light dimming feature is
357 interfaced to aRaspberry Pi board used to develop
pulse width modulated signals that drives a MOSFET to
switch a number of LEDs for controling the intensity.
RaspberryPI based Motor speed control: The speed of
a DC motor is directly proportional to the voltage
applied across its terminals. This project uses the
358 above principle to control the speed of the motor by
varying the duty cycle of the pulse applied to it
(popularly known as PWM control). A Raspberry Pi
board is used to deliver the PWM pulses to the motor.

Y
Proces
22499

23999

sor
Based

Proces
sor
Based

41

359

42

360

43

361

RaspberryPI based programmable sequential

switching: The project is based on RaspberryPI board
for programmable logic control of industrial loads by
the user. A keyboard is interfaced to the Raspberry PI
module which can be used to program the system in
set mode, auto mode or manual mode. Loads are
driven sequentially or individually in programmable
time intervals from the output of the Raspberry PI
module based on the mode selected.
RaspberryPI based Solar street light: LED based street
lights with auto intensity control using solar power
from photovoltaic cells duly interfaced to a Raspberry
Pi board. The project stores solar energy in a battery
during day time and automatically operates street
light in evening with varying intensity control to
minimize waste of energy.
Softstart of Induction Motor by AC-PWM: Soft start of
induction motor with negligible harmonics by ac
chopper using a full bridge in series with the load
which is controlled by an IGBT . Soft Start by such
method is very highly reliable compared to thyristor
based firing angle control that is rich in THD and
damages the motor. A lamp is provided as load for
demonstration purpose.

Proces
24399
sor
Based

25499

Proces
sor
Based

6499

MC
8051

PRICE RANGE FOR PROJECT KIT: LESS THAN Rs.3000/- (all inclusive)
WIRE LOOP BREAKING ALARM SIGNAL: The project is
designed to generate an alarm signal in the event of
44

214
breaking of a wire in loop. The project uses a buzzer to

3199

Y
alert the user.

Solar

Robotics

Sensor
based

on

Electronics
Communica
ti

Power

Electronics

General

Android

Electrical

Product

Embedded

DIY (Rs.)

S.No.
Model
No.

Category

REMOTE JAMMING DEVICE: The project is designed to

develop IR rays of 38KHz usually emitted by a standard
TV remote. The rays developed are powerful enough to
45

193 overshadow the IR receiver in TV. Thus the remote used

would lose its function as long as the IR rays generated
by the project are falling on the receiver.

3299

MAINS OPERATED LED LIGHT: A string of LEDs are

made to operate at 230V AC by using a series capacitor
46

205 drop and current limit resistor. This concept of using

leds can be adopted to home lighting system in a most
cost effective way.

3299

3299

STEP UP 6 VOLT DC TO 10 VOLT DC USING 555 TIMER:

A 555 timer is used in astable mode to deliver the
47

48

49

50

208 output approximately twice the input voltage. The

output from the 555 timer is given to a voltage doubler
circuit to get the desired output.
WIRELESS AUDIO TRANSMITTER FOR TV: The audio
output of the TV is fed to an FM transmitter that
transmits the audio to be received by any FM receiver
227 (or a cell phone having FM radio).It can be used to
listen to TV sound without disturbing any one else.
AUTOMATIC DUSK TO DAWN (EVENING ON TO
MORNING OFF): Varying light intensity falling on an
LDR is used as input to a comparator. It is compared
203 with a fixed value to turn ON the appliances through
relay at the falling light intensity in the evening to
switch OFF in the morning light.
SELF SWITCHING POWER SUPPLY: This power supply
unit gives a variable regulated DC for microcontroller
300 circuits and switches off automatically in no load
condition.

3299

3599

3799

3999

VIDEO ACTIVATED RELAY TO CONTROL THE LOAD: The

project is designed to actuate a relay whenever an
51

215 input video signal is fed to it. For example, It can be

used for switching OFF a TV automatically once the
video signals are not available.

IR

HIDDEN ACTIVE CELL PHONE DETECTOR: A 555 timer in

mono-stable mode along with a high gain op amp is
52

53

54

188 used to detect Giga Hertz induced signals so produced

by an active cell phone with in closer proximity to sound
a buzzer alarm.
LONG RANGE FM TRANSMITTER WITH AUDIO
MODULATION: A microphone is used to feed audio
signals to modulate a carrier signal at a frequency of
around 106 MHz. This signal is further amplified with an
189
RF power amplifier that is connected to a tuned
antenna to cover a line of sight distance of about 2 km
(if we use Yagi antenna) or 20-30 Mtrs by GP/stick
antenna.
THERMISTOR BASED TEMPERATURE CONTROL : The
project is designed to develop a temperature control
system using a thermistor. An op-amp is used to sense
206 the falling resistance of increasing temperature by the
property of NTC (negative co-efficient thermistor). Then
the op-amp used as a comparator actuates a relay.

4199

4299

4299

TOUCH CONTROLLED LOAD SWITCH: The project is

designed to develop a touch sensitive switch to control
55

216 any load. A 555 timer is used in monostable mode to

drive a relay to switch ON a load for a fixed time
duration.

4199

4299

57

OVER VOLTAGE OR UNDER VOLTAGE TRIPPING

MECHANISM: Two 555 timers are used as window
comparator. This delivers an error output if the input
209 voltage to them crosses the range beyond the voltage
window.A relay is then operated to cutff the load for
saftey reasons.

4399

58

TIME DELAY BASED RELAY OPERATED LOAD: The

project is designed to develop a time delay based
218 switch to control any load. A 555 timer is used in
monostable mode to drive a relay to switch ON/OFF a

4299

PHASE SEQUENCE CHECKER FOR THREE PHASE SUPPLY:

3-phase supply of 440V AC 50Hz is fed to a logic circuit
comprising of NAND gates and OR gates to detect the
56

254 sequence of R Y B by triggering a timer for a LED to

indicate output phase out of sequence. The output can
also be tested by using a sequence meter (not supplied
with the kit).

Tempe
rature

59

60

61

297

4299

4599

4599

4699

4699

221

ELECTRONIC EYE CONTROLLED SECURITY SYSTEM: The

project is designed as a security system based on photo
sensing arrangement. It uses a 14- stage ripple carry
binary counter to sense the light intensity through LDR.
The outup drives a buzzer and a relay for necessary
action.

4899

LAMP LIFE EXTENDER BY ZVS (Zero Voltage Switching):

Incandescent lamps exhibit very low resistance in cold
condition due to which it draws high current while
switched on, resulting in fast failure . Engaging a triac
whose switching on time can be precisely controlled by
firing it after detecting the zero cross point of the
waveform.

5199

204

212

62

222

63

229

64

65

LED BASED AUTOMATIC EMERGENCY LIGHT: This

emergency light takes 230V AC and it converts it in 12V
DC to charge a set of rechargeable batteries which is
used to lit up a pair of LEDs automatically in the event
of mains failure.
RHYTHM FOLLOWING FLASHING LIGHTS: Sound signals
sensed by condenser microphone are amplified to fed to
a decade counter that drives a string of LEDs to blink
rhythmatically as per the sound level.

INCOMING PHONE RING LIGHT FLASHER: A phone line

is connected through an opto isolator to drive a relay
whenever telephone ring is detected by the circuit. It
switches a 230v lamp to flash as per the telephone ring
to draw attention in higly noisy environment.
FASTEST FINGER PRESS QUIZ BUZZER: A set of 8
switches are interfaced to D-type flip flop working as
priority encoder. While number of switches are pressed
at same time, it takes the first swtich pressed into
consideration and generates a buzzer sound along with
INTELLIGENT OVERHEAD TANK WATER LEVEL
INDICATOR: The project is designed to give a display of
water level in a tank. The reading given is in the sale of
0 to 9. A priority encoder is interfaced to a decoder to
get the display of water level on 7 segment display.

MC
8051

PRICE RANGE FOR PROJECT KIT: LESS THAN Rs.5000/- (all inclusive)

66

167

67

24

68

174

69

70

71

237

1A

298

SMOOTH START OF A SINGLE PHASE INDUCTION

MOTOR: The project uses two anti-parallel SCRs in
series with the motor to the supply. SCRs are triggered
gradually from heavily delayed firing angle to zero
delay resulting in gradual increase of supply voltage to
the motor. This leads to a smooth start of the motor. A
lamp is provided as load for demonstration purpose.
DENSITY BASED TRAFFIC SIGNAL SYSTEM: The project
is designed to develop a density based dynamic traffic
signal system. The signal timing changes automatically
on sensing the traffic density at the junction. IR sensors
are used to monitor the density of the vehicles at the
junction. The signals from the IR receivers are fed to the
microcontroller to follow different time for different
level of traffic.
WIRELESS POWER TRANSFER: The project is to develop
a device to transfer power wirelessly to any gadget.
This project can also be used for charging batteries
those are physically not possible to be connected
electrically.
HIGH VOLTAGE DC BY MARX GENERATOR PRINCIPLES:
A number of capacitors are charged in parallel by
pulsed voltage to a specific voltage (V), with 50% or less
duty cycle from a DC source. The capacitors are
automatically placed in series such that all the (V) gets
added to deliver higher voltage based on the number of
capacitors used.
BEACON FLASHER USING MICROCONTROLLER: An
incandescent lamp is made to operate in flashing mode
from a microcontroller of 8051 family. For example,
this flashing is helpful in giving alert signals mounted on
high masts /ambulance/aviation towers/sea shores etc.
RFID BASED PAID CAR PARKING: It uses a
microcontroller along with sensing circuits monitoring
entry and exit of cars with help of owner accessed RFID
card swipe with a display indication besides indicating
the available number of parking.

5299

5499

MC
8051

5399

IR

5499

5399

MC
8051

5499

MC
8051

RFID

72

73

74

75

14

202

36

THYRISTOR CONTROLLED POWER FOR INDUCTION

MOTOR: The project is designed to control AC power
based on the principle of firing angle control. Two
thyristors connected in anti parallel are used in series
with the load for power control. Efficiency of such
power control is very high compared to any other
method. A lamp is provided as load for demonstration
purpose.
BIDIRECTIONAL ROTATION OF AN INDUCTION MOTOR
WITH A REMOTE CONTROL DEVICE: The
microcontroller receives the infrared signal from the IR
remote, the code of which is identified by the receiver
to operate a set of relays. The relays switches ON/OFF
the appropriate relay to power a split phase induction
motor to achieve desired direction by interchanging
leading supply phase from the main winding to the
auxiliary winding. Please note that a single phase
induction motor can be procured at an extra cost over
the kit cost.
IR OBSTACLE DETECTION TO ACTUATE LOAD: The
project is designed to actuate a load when IR rays are
interrupted. This is helpful in industries for sensing
movement of material in a conveyor belt for any action
to be taken. The project uses 38 KHz IR signal generated
feeding an IR diode which is received by tuned IR
receiver. When this signal is interrupted and iutput is
generated by the microcontroller.
STREET LIGHT THAT GLOWS ON DETECTING VEHICLE
MOVEMENT: The project is designed for LED based
street lights. A number of LED street lights glow for a
specific distance ahead, on sensing an approaching
vehicle and then switches OFF once the vehicle passes
by. Thus a lot of energy is saved in this process.
Optionally, dimming feature can be used in this sytem
while no vehicles are passing on the road.

5699

MC
8051

5799

MC
8051

5699

MC
8051

IR

5999

MC
8051

IR

IR

76

178

LIFE CYCLE TESTING OF ELECTRICAL LOADS BY DOWN

COUNTER: The project is designed to be used in
industries for testing of electrical loads ( lamps, motors
etc) using a down counter. A desired number is entered
through a keypad interfaced to a microcontroller of
8051 family. Upon activation, the system counts down
one in each second till the set number reaches zero. A
relay switches the load ON & OFF for every count thus
testing the life cycle of the product.

DENSITY BASED TRAFFIC SIGNAL SYSTEM USING PIC

MICROCONTROLLER: The project is designed to develop
a density based dynamic traffic signal system. The signal
timing changes automatically on sensing the traffic
77 PIC108 density at the junction. IR sensors are used to monitor
the density of the vehicles at the junction. The signals
from the IR receivers are fed to the microcontroller to
follow different time for different level of traffic.

78

AUTO INTENSITY CONTROL OF STREET LIGHTS: White

Light Emitting Diodes (LED) replaces HID lamps in street
lighting system to include dimming feature. A
microcontroller of 8051 family is used to control the
intensity by developing pulse width modulated signals
that drives a MOSFET to switch the LEDs according to
achieve desired operation.

5999

MC
8051

5999

MC
PIC

5999

MC
8051

6099

MC
8051

PC

6199

MC
8051

DTMF

IR

USING TV REMOTE AS A CORDLESS MOUSE FOR THE

COMPUTER: TV remote is used in this project to act as a
cordless mouse for the computer. This is achieved by
79

80

144

166

reading the coded data sent from the TV remote by a

sensor. The sensor is interfaced to a microcontroller
which responds to the coded signals and sends
appropriates instructions through serial communication
to the PC.
DISPLAY OF DIALED TELEPHONE NUMBERS ON SEVEN
SEGMENT DISPLAYS: Dialed telephone numbers are
picked up by a DTMF decoder to feed to a
microcontroller. This data is trasnmitted ten no's seven
segment LED displays for better visibility.

IR

81

82

83

84

85

192

211

228

1C

48

SUN TRACKING SOLAR PANEL: The project uses a solar

panel coupled to a stepper motor to track the Sun so
that maximum sun light is incident upon the panel at
any given time of the day. The microcntroller used is
programmed to rotate the stepper motor in regular
time intervals so that it tracks the sun.This is better
compared to light sensing method that may not be
accurate always. The project uses a dummy solar panel
for demonstration purpose.
OBJECT COUNTER WITH 7 SEGMENT DISPLAY: The
project is designed to monitor the counting operations
in industries. For example, products moving on a
conveyor belt are counted by IR interruption concept
and displayed on a seven segment display.
FOUR QUADRANT DC MOTOR SPEED CONTROL WITH
MICROCONTROLLER: The project has been designed to
develop a speed control system for DC motor in all the
four-quadrant. Using four-quadrant chopper it is
possible to demonstrate forward, instant forward
brake, reverse, instant reverse brake control of a DC
motor It uses an 8051 family microcontroller along with
a motor driver IC to drive the motor.
DISCOTHEQUE LIGHT STROBOSCOPIC FLASHER: Cluster
of high power LEDs are used to act like stroboscopic
light flasher. They are driven by a microcontroller of
8051 family through a MOSFET.
PORTABLE PROGRAMMABLE MEDICATION REMINDER:
The project acts as a reminder for people to take
medicines in time. Keypad is used to enter the time at
which the medicine is required to be taken. The real
time clock (RTC) used keeps tracking the time to remind
the person by a buzzer sound together with the name of
the medicine on the LCD display.

6199

MC
8051

6099

MC
8051

5999

MC
8051

5999

MC
8051

6299

MC
8051

IR

86

87

88

89

90

161

10

29

33

CELL PHONE BASED DTMF CONTROLLED GARAGE

DOOR OPENING SYSTEM: A mobile phone is connected
to the control unit so that the data received by the
phone is used to open/ close the door. This can be
achieved using DTMF technology. The main feature of
this project is that the user can control the garage door
from any part of the world using his mobile phone.
THREE PHASE SOLID STATE RELAY WITH ZVS: A three
phase solid state relay uses three single phase units
with each phase controlled individually by a power
triac. A snubber network across the triacs are used for
dV/dT protection for inductive loads. The zero crossing
feature of the opto-isolator used ensures the load to be
switched ON at start of the waveform.
INDUSTRIAL BATTERY CHARGER BY THYRISTOR FIRING
ANGLE CONTROL: DC power for a battery charger is
derived from a thyristor controlled rectifier system. AC
power is applied to the bridge rectifier comprising of
diodes and triacs to get the control from a
microcontroller interface through push button switches
used for increasing or decreasiong the DC power.
LINE FOLLOWING ROBOTIC VEHICLE : The project is
designed to develop a robotic vehicle that follows a
specific path. This project doesn't require a
microcontroller for its operation. A pair of photo
sensors comprising IR transmitter and photo diode are
used to detect the specified path for its movement.
PROGRAMMABLE LOAD SHEDDING TIME
MANAGEMENT FOR UTILITY DEPARTMENT: Multiple
time operated electrical load control system is a reliable
circuit that takes over the manual task of switch on/off
the as per programed time. It has an inbuilt real time
clock (RTC) to keep tracking the time and switch
ON/OFF the load accordingly.

6299

MC
8051

6399

MC
8051

6399

MC
8051

5899

6399

DTMF

MC
8051

IR

91

92

225

289

93

94

19

95

109

SPEED CHECKER TO DETECT RASH DRIVING ON

HIGHWAYS:
The time difference between 2 spots on a highway, one
in advance to the other in the direction of the traffic
flow, is sensed & fed to a control board to convert the
same to the speed of a vehicle and generate a warning
upon exceeding specified speed limit.
Programmable AC power: Based on the principle of
firing angle control of thyristors, their triggering is
automatically adjusted to maintain the desired power
to the load duly interfaced from a microcontroller with
keypad entry programming features. The project uses a
lamp such that the entered power matches the required
one verified by its intensity. The above operation is
carried out by using a TRIAC in series with the AC load.
THYRISTOR POWER CONTROL BY IR REMOTE: Project
uses a standard TV remote for speed control of an
induction motor such as fans. An IR receiver is
interfaced to a microcontroller to read the coded data
from the remote to activate the corresponding output
with a digital display. A lamp is provided as load for
demonstration purpose.
OPTIMUM ENERGY MANAGEMENT SYSTEM: The
project is designed to monitor the number of persons
entering as well as exiting a room. Electrical loads are
switched ON as the first person enters and switches OFF
when the last person leaves. IR sensors used in
combination with microcontroller to monitor all the
operations. This helps in saving lot of energy.
PARALLEL TELEPHONE LINES WITH SECURITY SYSTEM:
This project can be used in houses and offices where
more than one telephone is connected in parallel from
a single telephone line. The project is used to connect
four telephones in parallel to one line. When any phone
is lifted, all the other phones are disconnected from the
telephone line automatically with a display of the
phone in use.

6499

IR

6399

MC
8051

6499

MC
8051

6499

MC
8051

6599

MC
2051

IR

IR

96

234

PC CONTROLLED SCROLLING MESSAGE DISPLAY FOR

NOTICE BOARD: Message sent from the PC is
transmitted to the notice board over cable. It goes on
scrolling on a LCD display of 2 lines until the next
message is entered.

6499

MC
8051

PC

FOUR QUADRANT DC MOTOR CONTROL WITHOUT

MICROCONTROLLER: The project has been designed to
develop a system using timers for DC motor control in
97

98

99

100

101

241

all the four-quadrants. Using four-quadrant chopper it

is possible to demonstrate forward, instant forward
brake, reverse, instant reverse brake control of a DC
motor.

6599

242

SPEED CHECKER TO DETECT RASH DRIVING ON

HIGHWAYS:
The time difference between 2 spots on a highway, one
in advance to the other in the direction of the traffic
flow, is sensed & fed to a programmed microcontroller
to convert the same to the speed of a vehicle and
generate a warning upon exceeding specified speed
limit.

6599

MC
8051

INDUSTRIAL POWER CONTROL BY INTEGRAL CYCLE

SWITCHING WITHOUT GENERATING HARMONICS:
Integral cycle control is a method to remove portions of
full cycles/one cycle of an AC signal for controlling AC
power across linear loads interfaced to a programmed
microcontroller of 8051 series. This process of power
control generates 1% THD as against 61% of firing
angle control. A lamp is provided as load for

6799

MC
8051

6599

MC
8051

6799

MC
8051

22

181

PC BASED ELECTRICAL LOAD CONTROL: Electrical

appliances can be controlled through a PC interfaced to
a microcontroller. This interface is done through a level
shifter IC. The loads are then controlled through the
relays duly interfaced to the relay driver which in turn is
connected to the microcontroller.
BLDC MOTOR SPEED CONTROL WITH RPM DISPLAY:
The project is used for controlling the speed of BLDC
motor and display the same using an IR method of
speed sensing mechanism being driven by PWM
controlled MOSFET. This project uses an 8051 family
microcontroller.

IR

PC

IR

STAMP VALUE CALCULATOR FOR POSTAGE NEEDS:

Calculating the weight of the postal documents by an
102

185

arrangement that is used to control a potentiometer.

The output of the same is fed to an ADC duly interfaced
to a microcontroller that generates the desired display.

6599

MC
8051

6899

MC
8051

6899

MC
8051

6899

MC
8051

6899

MC
8051

6899

MC
8051

Auto power supply control from 4 different sources:

Solar, Mains, Generator & Inverter to ensure no break
power: The main scope of the project is to consume the
103

power from supply mains, generator, inverter and solar

optimally by using appropriate program through
microcontroller in most cost effective way.
AUTOMATIC SURVELLIANCE CAMERA PANNING
SYSTEM FROM PC: The project uses a PC with RS 232

104

105

106

107

156

182

148

150

interface to a microcontroller for enabling speed the

speed control of motor from the PC by a motor driver IC
controlled from the microcontroller.
PREDEFINED SPEED CONTROL OF BLDC MOTOR: The
project uses a 8051 family microcontroller interfaced to
EEPROM to store the speed information for operation
of the motor which is driven by a PWM fed MOSFET.
The speed of the motor is sensed through IR sensing
mechanism. The input speed is given by a set of
switches. A LCD display is interfaced to the
microcontroller to display the speed of the motor.
DTMF BASED LOAD CONTROL SYSTEM: The project
works on the principle of DTMF tone command so
received from any phone to remotely switch any
electrical load such as agricultural pump, domestic and
industrial loads etc. This device uses a microcontroller
of 8051 family interfaced to DTMF decoder for receiving
tone commands to actuate loads from the output of the
microcontroller as per the program.
SYNCHRONIZED TRAFFIC SIGNALS : (Get green signal
all through successive street junctions).All the traffic
junctions in a main road are synchronized for signal
lighting such that the vehicle gets green signal at all the
junctions while moving at a normal speed.

PC

IR

DTMF

108

109

171

220

LINE FOLLOWING ROBOTIC VEHICLE USING

MICROCONTROLLER : The project is designed to
develop a robotic vehicle that follows a specific path.
This project uses a microcontroller of 8051 family for its
operation. A pair of photo sensors comprising IR
transmitter and photo diode are interfaced to the
controller to detect the specified path for its movement.
PRECISE ILLUMINATION CONTROL OF LAMP: A precise
illumination in terms of percentage of the full
illumination is entered through a numeric keypad. A
microcontroller of 8051 family is used to maintain the
illumination of a lamp. The firing angle is automatically
adjusted to maintain the load power to the lamp such
that the entered intensity matches the required one.

STREET LIGHT THAT GLOWS ON DETECTING VEHICLE

MOVEMENT: The project is designed for LED based
street lights using PIC microcontroller. A number of LED
street lights glow for a specific distance ahead, on
110 PIC107 sensing an approaching vehicle and then switches OFF
once the vehicle passes by. Thus a lot of energy is saved
in this process. Optionally, dimming feature can be used
in this sytem while no vehicles are passing on the road.
USING TV REMOTE AS A CORDLESS MOUSE FOR THE
COMPUTER USING PIC MICROCONTROLLER: TV remote
is used in this project to act as a cordless mouse for the
computer. This is achieved by reading the coded data
111 PIC117 sent from the TV remote by a sensor. The sensor is
interfaced to a microcontroller which responds to the
coded signals and sends appropriates instructions
through serial communication to the PC.

6399

MC
8051

7099

MC
8051

7099

MC
PIC

6899

MC
PIC

IR

IR

PC

IR

112

11

ULTRA FAST ACTING ELECTRONIC CIRCUIT BREAKER:

The project is to shut down the power supply when it is
overloaded. Conventional circuit breaker like MCB
based is on thermal bimetal lever trip mechanism. It is
very slow and the trip time is dependent upon the
percentage of overload. This project senses the current
passing through a series element and the
corresponding voltage drop is compared against the
preset voltage proportional to the current by a level
comparator to generate an output for the load to trip.

7299

MC
8051

7299

MC
8051

7199

MC
8051

7099

MC
8051

7499

MC
2051

SECURITY SYSTEM WITH USER CHANGEABLE

PASSWORD: The microcontroller based lock indication
is an access control system that allows only authorized
113

53

persons knowing the password only. Password is stored

in another dedicated EEPROM that can be changed at
any time unlike a fixed one burnt permanently on to the
microcontroller.
DETECTING POWER GRID SYNCHRONISATION FAILURE
ON SENSING FREQUENCY OR VOLTAGE BEYOND
ACCEPTABLE RANGE: Synchronization failure of an
alternate supply source connected to the grid is

114

64

detected by this system. The failure can be either

under/over voltage or under/over frequency. The
project uses a 8051 family microcontroller to perform
this operation. This mechanism is popularly known as
islanding of grid connected source.
AUTOMATIC BELL SYSTEM FOR INSTITUTIONS: The
project is designed to develop an automatic bell system
for academic institutions. Multiple time operated

115

116

33A

30

electrical load control circuit is used to develop this

system. It has an inbuilt real time clock (RTC) to keep
tracking the time and switch ON/OFF the bell
accordingly.
TV REMOTE OPERATED DOMESTIC APPLIANCES
CONTROL: The project is designed to operate electrical
loads using a TV remote. The remote transmits coded
infrared data which is then received by a sensor
interfaced to the control unit. The system operates
electrical loads depending on the data transmitted from
the TV remote.

IR

117

118

119

120

121

169

12

15

155

NON CONTACT TECHOMETER: The project uses the IR

transmitting and receiving technique by reflection of IR
rays from any rotating object such as a motor shaft.
This will help measuring the speed without any physical
contact often required in industrial environment.
SPEED CONTROL UNIT DESIGNED FOR A DC MOTOR:
The speed of a DC motor is directly proportional to the
voltage applied across its terminals. This project uses
the above principle to control the speed of the motor by
varying the duty cycle of the pulse applied to it
(popularly known as PWM control). A microcontroller is
used to deliver the PWM pulses to the motor.
AUTOMATIC IRRIGATION SYSTEM ON SENSING SOIL
MOISTURE CONTENT: The project is designed to
operate a pump for automatic irrigation. It comprises of
moisture sensing arrangement interfaced to an op-amp
configured as a comparator. So whenver moisture in
the soil reduces, it turns the water pump ON. This
results in increase of the moisture content which in tunr
switches OFF the motor. The above operations are
monitored by a 8051 family microcontroller.
PROGRAMMABLE SWITCHING CONTROL FOR
INDUSTRIAL AUTOMATION IN REPETITIVE NATURE OF
WORK: The project is based on a microcontroller (8051
series MC) for programmable logic control of industrial
loads by the user. Few switches are duly interfaced to
the microcontroller which can be used to program the
system in set mode, auto mode or manual mode. Loads
are driven sequentially or individually in programmable
time intervals from the output of the microcontroller
based on the mode selected.
CLOSED LOOP CONTROL FOR A BRUSHLESS DC MOTOR
TO RUN AT THE EXACTLY ENTERED SPEED: A keypad is
interfaced to a 8051 series microcontroller to enter the
desired speed for a BLDC motor. Speed sensing
arrangement is made on IR reflection principle which is
interfaced to the microcontroller as an input for the

7299

MC
8051

7699

MC
8051

7599

MC
8051

7599

MC
8051

7599

MC
8051

IR

IR

Portable Programmable Medication Reminder using

PIC Microcontroller: The project acts as a reminder for
people to take medicines in time. Keypad is used to
enter the time at which the medicine is required to be
122 PIC115 taken. The real time clock (RTC) used keeps tracking the
time to remind the person by a buzzer sound together
with the name of the medicine on the LCD display.

123

124

125

126

49

164

PROGRAMABLE ENERGY METER FOR ELECTRICAL LOAD

SURVEY: A The project is designed to automatically
calculate energy details within a minute using
programmble microcntroller of 8051 family. It indicates
on an LCD display, the load consumption in units and
cost in rupees for any load required to be used for a
specific number of hours.
UNDERGROUND CABLE FAULT DISTANCE LOCATOR: A
fixed set of resistors are used representing the distance
of the cable in kilometers. A DC voltage is fed over the
line in mutiplexing mode in combination with a ADC to
detect the fault current and show the distance on a LCD
display based on voltage drop principle.

7599

MC
PIC

7399

MC
8051

7899

MC
8051

213

SOLAR POWER CHARGE CONTROLLER: The solar energy

is converted to electrical energy by photo-voltaic cells.
This energy is stored in batteries during day time for
utilizing the same during night time. This project deals
with a controlled charging mechanism which over
charge, deep discharge and under voltage of the
battery.

7299

282

Industrial Temperature Controller: This practical

temperature controller controls the temperature of any
heating device according to its requirement for any
industrial application. Using IC
DS1621 Digital
temperature sensor user-defined
maximum and
minimum temperature settings are stored in a
nonvolatile memory EEPROM through 8051 series
microcontroller to switch on and off the heater load to
maintain the temperature with in the limits.

7699

MC
8051

Temp

127

145

128

172

129

35A

130

131

186

28A

MOVEMENT SENSED AUTOMATIC DOOR OPENING

SYSTEM: Automatic door opening system is achieved by
sensing any approaching body by PIR sensor interfaced
to programmed microcontroller of 8051 family. Upon
sensing the movement, microcontroller drives a motor
through motor driver IC with locked rotor protection
system for door operation.
AUTOMATIC DIALING TO ANY TELEPHONE USING I2C
PROTOCOL ON DETECTING BURGLARY: Automatic
dialing of stored number (in EEPROM) by a
microcontroller is achieved in the event of any
burgalary attempt. A keypad is used to load the number
onto the EEPROM. An encoder is used to dial the
number through the landline connected to the device.
The system is protected by a password.
CELL PHONE CONTROLLED ROBOTIC VEHICLE: The
project is designed to develop a robotic vehicle that is
controlled by a cell phone. DTMF commands from a
phone is sent to another cell phone which is mounted
on the robot. These commands are fed to a
microcontroller of 8051 family to operate the vehicle
movement through motor interface.
DISH POSITIONING CONTROL BY IR REMOTE: Pthe
project is designed to enable 3D movement of a dish by
using two DC geared motors. One motor rotates in
horizontal plane while the other in vertical plane. The
project is controlled by a IR remote for distant
operation of the dish positioning.
IR CONTROLLED ROBOTIC VEHICLE: The project is
designed to control a robotic vehicle using a standard
TV remote. IR sensor is interfaced to the control unit on
the robot for sensing the IR signals transmitted by the
remote. This data is conveyed to the control unit which
moves the robot as desired. An 8051 series
microcontroller is used in this project as control device.

7999

7999

MC
8051

PIR

MC
8051

7399

MC
8051

8199

MC
8051

7499

MC
8051

DTMF

DTMF

IR

IR

Dual Converter: This single phase dual converter

consists of a pair of thyristor controlled bridge (4 SCRs
X 2 ) that enables a DC motor to get reversed polarity
132

133

290

32

134

42

135

61

for either direction rotation and speed control also by

thyristor triggering from Microcontroller to each bridge
SCR bank of duly interfaced through opto-isolators.
PASSWORD BASED CIRCUIT BREAKER: The project is
designed to control a circuit breaker with help of a
password only. A keypad is interfaced to a
microcontroller to enter the password. Fatal electrical
accidents to the line man can thus be avoided which
often happens due to lack of communication and coordination between the maintenance staff and the
electric substation staff.
CYCLO CONVERTER USING THYRISTORS: It is difficult
to vary speed of an induction motor which is one of the
main disadvantage. This is overcome by using a
thyristor controlled cycloconverter that enables the
speed to be lowered in three steps. A microcontroller of
8051 family is used to trigger a SCR bank of 8nos,
isolated by opto isolators to achieve F,F/2 & F/3 by an
appropriate program. F stands for frequency. Please
note that a single phase induction motor can be
procured at an extra cost over the kit cost.
NETWORKING OF MULTIPLE MICROCONTROLLERS: The
project uses three microcontrollers in network to
establish communication between them. One MC is
connected to the input while the other to a display unit
and the thrid one to an output device. Being
interconnected, serial communication between them
results in desired action to take place as per the logic of
the program.

8199

MC
8051

8299

MC
8051

8399

MC
8051

8299

MC
8051

136

18

PRECISE DIGITAL TEMPERATURE CONTROL : The

project uses a digital temperature sensor for precise
control of temperature in medical applications or
industries. This system is better than analog/thermostat
system, which has poor accuracy. A microcontroller of
8051 family is interfaced with set of swithces, sensor
and 7 segment displays for setting the desired
temperature. A load such as heater or lamp is thus
accuated to maintain the desired temperature.

SOLAR ENERGY MEASUREMENT SYSTEM: Solar photovoltaic data such as voltage, current, temperature,
light intensity for calculating solar insolation etc are
137 PIC111 monitored by a PIC microcontroller having built in multi
channel ADC and displayed on a LCD screen.

138

47

DISTANCE MEASUREMENT BY ULTRASONIC SENSOR:

The project is designed to measure the distance of any
object by using an ultrasonic transducer. The
transmitted ultrasonic waves are reflected back from
the object and received by the transducer again. The
total time taken from sending the waves to receiving it
is calculated by taking into consideration the velocity of
sound by a program running on the microcontroller.
The distance is then displayed on an LCD interfaced to
the microcontroller of 8051 family.

MC
8051

Tempe
rature

MC
PIC

Tempe
rature

7899

MC
8051

Ultras
onic

8799

MC
8051

7899

MC
8051

8399

7999

SCADA (SUPERVISORY CONTROL & DATA

ACQUISITION) FOR REMOTE INDUSTRIAL PLANT:
Supervisor sitting on the PC terminal is able to control
plant parameters remotely over RS232 network while
139

140

76

292

monitoring the data acquired through several sensors.

The project uses a front end for the control and a
backend with microcontroller interfaced to an ADC from
temperature sensors for data collection and control.
Contactless Liquid level controller: Unlike traditional
contact based level controller this most reliable
controller uses ultrasonic reflection for sensing liquid
level in a tank to start the filling pump at certain low
level and stop that at highest level automatically.

PC

Tempe
rature

Ultra
sonic

MINIMISING PENALITY IN INDUSTRIAL POWER

CONSUMPTION BY ENGAGING APFC UNIT: Automatic
Power Factor Compensation (APFC) is achieved by
engaging number of shunt capacitor in parallel to
141

142

59

251

inductive loads. The time lag between zero voltage and

zero current is fed to the microcontroller (8051 family)
that drives relays from its output for bringing shunt
capacitors across the load till the power factor reaches
0.9.
POWER SAVER FOR INDUSTRIES & COMMERCIAL
ESTABLISHMENTS: The project is designed for lagging
current compensation by engaging shunt capacitors
automatically as per the requirement against the
inductive loads largely used in industries. This saves lot
of power and thus reduces electric bill in domestic and
commercial establishments.

Synchronized traffic signals at various junctions using

PIC microcontroller : (Get green signal all through
successive street junctions).All the traffic junctions in a
143 PIC112 main road are synchronized for signal lighting such that
the vehicle gets green signal at all the junctions while
moving at a normal speed.

9199

MC
8051

9299

MC
8051

9099

MC
PIC

INDUCTION MOTOR PROTECTION SYSTEM: The project

is designed to protect an induction motor from single
phasing and over temperature. It uses sensors
144

145

160

168

interfaced to comparators for disconnecting the motor

through a realy. The project is supplied with lamps in
place of 3 phase motor for demonstration purpose.
HIGH VOLTAGE DC UPTO 2KV FROM AC BY USING
DIODE AND CAPACITORS IN VOLTAGE MULTIPLIER
CIRCUIT: 1000 PIV diodes in combination with 100uF
electrolytic capacitors forming a ladder network
multiplies the input AC to develop DC output 7 times
the input read on a multimeter approximately.

9499

9399

146

147

244

243

FACTS (FLEXIBLE AC TRANSMISSION) BY TSR: The

project is used to achieve static voltage compensation
under FACTS using thyristor switched reactor (TSR) in
shunt. This helps in lowering the voltage at the load
end that may draw leading current either during
charging the transmission line or during low loads.
FACTS BY SVC (FLEXIBLE AC TRANSMISSION): Static
VAR Compensation under FACTS is achieved using TSC,
thyristor switched capacitors based on shunt
compensation. These are duly controlled from a
programmed microcontroller of 8051 family.

9399

MC
8051

9599

MC
8051

AUTOMATIC STAR DELTA STARTER USING RELAYS AND

ADJUSTABLE ELECTRONIC TIMER FOR INDUCTION
MOTOR: The project is designed to start a 3 phase
motor at 440 volt AC mains supply 50 Hz with a set of
12 volt DC relays in star mode and then to delta mode
148

13

149

232

150

226

by an electronically adjustable timer. A set of relays are

used to shift the motor connections from star to delta
with a time delay. The project is supplied with six lamps
instead of a 3 phase motor i.e., two lamps representing
each pahse winding of the motor.
PRE STAMPEDE MONITORING AND ALARM SYSTEM: A
large number of pressure actuated switches interfaced
to a microcontroller is used to achieve pre-stampede
alarm system. A buzzer sound is generated once the
large crowd concentrates at place exceeding the safe
number.
HOME AUTOMATION USING DIGITAL CONTROL: A
circuit interfaced to a land line telephone is used to
control home appliances remotely using DTMF
technology but without using any microcontroller or
any program.

9699

9899

10099

MC
8051

DTMF

151

152

153

154

155

156

163A

66

247

249

170

170A

ELECTRONIC SOFT START FOR 3 PHASE INDUCTION

MOTOR: 6nos. of SCRs i.e., two in anti parallel in each
phase are phase controlled in a similar manner to a
light dimmer. They are gradually turned ON for a part
of each cycle to control the voltage by varying the
conduction angle of the SCRs. By variation of the
conduction angle, the output voltage is reduced during
start and then smoothly increased to full value within
few cycles. Please note that lamps are provided in this
project for demonstration purpose.
SOLAR POWERERD LED STREET LIGHT WITH AUTO
INTENSITY CONTROL: The project is designed for LED
based street lights with auto intensity control using
solar power from photovoltaic cells. Intensity control is
achieved through a microcontroller of 8051 family. The
project stores energy in a battery during day time and
automatically operates street light in evening with
varying intensity control to minimize waste of energy.
WIRELESS MESSAGE COMMUNICATION BETWEEN TWO
COMPUTERS:A pair of 2.4Ghz transreceiver units are
used for bidirectional communication from one PC to
another wirelessly using hyper terminal.
OBSTACLE AVOIDANCE ROBOTIC VEHICLE: Ultrasonic
sensor based robotic vehicle that avoids any obstacle
and changes its direction as required. A microcontroller
of 8051 family is used for achieving the desired
function.
RFID BASED ATTENDANCE SYSTEM: RFID tag with
details of the employee keep tracking of their
attendance while swiped on the RFID reader interfaced
to a microcontroller with LCD display for indication.
RFID BASED PASSPORT DETAILS: Identifying the
passport holder through data stored in RFID tag by
retrieving the same through a reader duly interfaced to
the microcontroller by a LCD display.

10099

9899

MC
8051

PC,
XBEE

8799

8799

MC
8051

Ultras
onic

9399

MC
8051

RFID

9399

MC
8051

RFID

157

246

RF BASED HOME AUTOMATION SYSTEM: Using RF

technology several loads in home or office to be
controlled for optimum use of energy.

PRE STAMPEDE MONITORING AND ALARM SYSTEM

USING PIC MICROCONTROLLER: A large number of
pressure actuated switches interfaced to a
158 PIC116 microcontroller is used to achieve pre-stampede alarm
system. A buzzer sound is generated once the large
crowd concentrates at place exceeding the safe
number.
SECRET CODE ENABLED SECURE COMMUNICATION
USING RF TECHNOLOGY: The project helps sending
secured message transmitted through RF
communication by using microcontroller and received
159
23
by another microcontroller where the message is
retrieved against a secret code used by the transmitter.
LCD display units at trasnmitter and receiver is userd to
display the message.
THREE PHASE FAULT ANALYSIS WITH AUTO RESET ON
TEMPORARY FAULT AND PERMANENT TRIP
OTHERWISE: Six numbers of step down transformers
are used for forming star and delta secondaries at low
voltage output. Fault condition is created with a set of
160 165
switches to input LL, LG, 3L fault to the circuit. This
triggers a 555 timer in monostable to reset after fault
clearance in a short duration temporary fault or
permanentaly trip the output incase of prolonged fault.

161

158

RFID SECURITY ACCESS CONTROL SYSTEM: RFID system

is used to authorise the tag holder to enter a secure
area. The RFID reader reads the data present on the
RFID tag. This data is compared in microcontroller to
match the built in data for status display and
authorizing the entry which is indicated with a lamp
coupled with an LCD display.

10899

MC
8051

10799

MC
PIC

10799

MC
8051

11399

10099

RF

MC
8051

RF

RFID

162

149A

163

34

METAL DETECTOR ROBOTIC VEHICLE: The project is

designed to develop a robotic vehicle that can sense
land mines ahead of it. The robot is controlled by a
remote using RF technology. It consists of a metal
detector circuit interfaced to the control unit that
alarms the user behind it about a suspected land mine
ahead. An 8051 series of microcontroller is used for the
desired operation.
OBJECT DETECTION BY ULTRASONIC MEANS: This
ultrasonic proximity detector is particularly useful for
detecting objects ahead within a certain distance such
as surveillance security areas, wild life photography.
The detector is interfaced to a microcontroller of 8051
family. The controller takes appropriate action after
receiving the signal from the transducer. In this project
we are using a magnetic gun as an output from the
microcontroller.

MC
11199 8051

10399

MC
8051

164 PIC104 secure area. The RFID reader reads the data present on
the RFID tag. This data is compared in microcontroller
to match the built in data for status display and
authorizing the entry which is indicated with a lamp
coupled with an LCD display.
UPFCRELATED DISPLAY OF LAG AND LEAD POWER
FACTOR: Microcontroller based LCD display of lagging
current , leading current & linear current together with
reading of power factor & the leading / lagging time of

10599

MC
PIC

165

11999

MC
8051

11899

MC
8051

RF

Ultras
onic

RFID BASED DEVICE CONTROL AND

AUTHENTICATION(using PIC Microcontroller): RFID
system is used to authorise the tag holder to enter a

245

the current vs voltage. It has provision of choosing the

increasing inductive load , switching to linear load and
also has an arrangement of auto increment of the
capacitive load programmatically

GSM

RF CONTROLLED ROBOTIC VEHICLE WITH LASER BEAM

ARRANGEMENT: The project is designed to control a
robotic vehicle by using a RF technology for remote
166

27

operation. A low power laser light is interfaced for

demonstrating the possibilities of destroying a distant
object by its beam. An 8051 series of microcontroller is
used for the desired operation.

RF

AUTO SELECTION OF ANY AVAILABLE PHASE, IN 3

PHASE SUPPLY SYSTEM: The project is designed to
provide uninterrupted AC mains supply i.e., 230 volt to
167

173

the single phase load. This is achieved by automatic

change over of the load from the missigng phase to the
next available phase in a 3 phase system.

12799

SECURITY SYSTEM USING SMART CARD TECHNOLOGY:

The project is a security system developed to avoid
unauthorised acess to any connected device. The
168

21

169

40

170

157

system uses smart card technology to identify the

authorized personnel, possessing a valid card with
him/her, to acess any secure area or deivce.
Tampered energy meter monitoring conveyed to
control room by GSM WITH USER PROGRAMABLE
NUMBER FEATURES : The main scope of this project is
to send message from any tampered energy meter to
be received by the control room by means of GSM
modem by user programable number upon a mis-call .
A message is sent to the same number stored in
microcontroller to alert the tampering of the meter.
Flash Flood intimation over GSM WITH USER
PROGRAMABLE NUMBER FEATURES to the station
master: High water level detector interfaced to micro
controller that outputs a signal to a GSM modem for
sending an SMS to the station master through GSM by
user programable number upon a mis-call to direct
the train driver to stop the train.

12299

MC
8051

Smart
card

12299

MC
8051

GSM

12299

MC
8051

GSM

12299

MC
8051

GSM

RAILWAY TRACK SECURITY BY GSM WITH USER

PROGRAMABLE NUMBER FEATURES: The system
detects for breakage /crack in railway tracks using line
171

190

loop current break to sense the same to send interrupt

to the controller to send an SMS to the station master
through GSM by user programable number upon a miscall.

IR

172

173

201

17

174

154

175

224

176

240

WIRELESS ELECTRONIC NOTICE BOARD BY GSM WITH

USER PROGRAMABLE NUMBER FEATURES : The
microcontroller receives the message from transmitter
through GSM by user programable number upon a miscall interface, to be displayed on the LCD at user end
interfaced to the microcontroller.

AUTOMATIC WIRELESS HEALTH MONITORING SYSTEM

IN HOSPITALS FOR PATIENTS: Monitoring patient
health remotely in hospitals over wireless from the
patient bed to the doctors chamber by RF with LCD
display at both ends and optionally an alarm on critical
situation.
Theft intimation of the vehicle over GSM BY SMS
WITH USER PROGRAMABLE NUMBER FEATURES to
owner who can stop the engine remotely: Theft
intimation of the vehicle over sms using GSM modem
by user programable number upon a mis-call , to the
owner while unauthorized door entry is made. Owner
can send command through his mobile to stop the
engine by activating the relay interfaced to a
microcontroller along with the GSM modem used for
the purpose.
SINE PULSE WIDTH MODULATION (SPWM): Aadaptive
sine-weighted pulse width modulated output is
generated by a programed microcontroller of 8051
family for developing a 50Hz sine wave three phase AC
from single phase AC. Please note that a three phase
induction motor can be procured at an extra cost over
the kit cost.
SVPWM SPACE VECTOR PULSE WIDTH MODULATION:
Project is designed to generate 3 phase supply from
single phase supply using 6 no's MOSFETs. It comprises
of a 3 phase bridge inverter driven from a programable
microcontroller (8051 family) through bridge drivers
and opto-isolators. Single phase source is converted to
DC which is used for the inverter. Please note that a
three phase induction motor can be procured at an
extra cost over the kit cost.

12299

MC
8051

GSM

14599

MC
8051

RF

MC
12699 8051

Tempe
rature

Tempe
GSM rature

15199

MC
8051

15199

MC
8051

SPEED SYNCHRONISATION OF MULTIPLE MOTORS IN

INDUSTRIES USING PIC MICROCONTROLLER: Multiple
motors used in industries like textile mill, steel plant,
papaer mill etc using conveyor belts needs the motors
177 PIC113 used to be synchronized. This is achieved by
independent microcontrollers interfaced to each motor
with speed sensing arrangement and keypad to enter
speed. The project uses 3 motors for demonstration
purpose.
Vehicle theft intimation to the owner on his cell phone
by GSM WITH USER PROGRAMABLE NUMBER
FEATURES (Using PIC Microcontroller): Theft
intimation of the vehicle over SMS using GSM modem
by user programable number upon a mis-call to the
178 PIC106 owner while unauthorized door entry is made. Owner
can send command through mobile to stop the engine
whose ignition is disabled through a relay fed from the
microcontroller which gets command from the GSM
modem.
UNIQUE OFFICE COMMUNICATION SYSTEM USING RF:
Extremely useful PC based RF communication system in
an office from the boss to the subordinates having
179

233

small LCD display terminals. This is interfaced to

independent microcontrollers which receives message
on selective or common to all basis with a receive tone
alert.

15299

13399

181

147

146

in rupee terms on daily and monthly basics to the user

and billing details sent over GSM by user programable
number upon a mis-call form the user to the
department for generating the printed bill.
Railway level crossing gate control through GSM by
SMS WITH USER PROGRAMABLE NUMBER FEATURES
by the station master or the driver: Railway level
crossing gate motor ,controlled by the station master
or the engine driver through GSM modem by user
programable number upon a mis-call interfaced to
microcontroller for deriving an output to dive a relay
for the gate motor operation.

RF

MC
PIC

14799

MC
8051

13399

MC
8051

13899

MC
8051

GSM based monthly Electricity energy meter billing

with SMS UPON GSM WITH USER PROGRAMABLE
NUMBER FEATURES TOGATHER WITH ONSITE display
to the user: Domestic electricity consumed is displayed
180

MC
PIC

GSM

RF,PC

GSM

GSM

IR

Integrated energy management system based on GSM

WITH USER PROGRAMABLE NUMBER FEATURES and
acknowledgement features: An SMS sent through the
cell phone to a distant location GSM modem by user
182

183

184

159 programable number upon a mis-call for any load

interfaced from a micro controller through relay and
relay driver to switch ON and switch OFF the same
with acknowledgement sent back to the sender on
SMS upon the action taken and the status of the load.
PRE-PROGRAMMED DIGITAL SCROLLING MESSAGE
SYSTEM: The project is uses alphanumeric LED displays
223 for scrolling message over it. This project can be used
for advertisement purposes.
TOUCH SCREEN BASED INDUSTRIAL LOAD SWITCHING:
Touch screen panel managed industrial switching
system( or home ) for industrial load control in
235 corrosive / inflammable environment that prohibits use
of conventional switches.

14099

186

180 meter is also sent by to any cell phone by a message

through GSM modem by user programable number
upon a mis-call which also receives commands from
the cell phone to control the electrical loads.
SPEED SYNCHRONISATION OF MULTIPLE MOTORS IN
INDUSTRIES: Multiple motors used in industries like
textile mill, steel plant, papaer mill etc using conveyor
belts needs the motors used to be synchronized. This is
231 achieved by independent microcontrollers interfaced to
each motor with speed sensing arrangement and
keypad to enter speed. The project uses 3 motors for
demonstration purpose.

16399

GSM

MC
14299 8051

ENERGY METER BILLING WITH LOAD CONTROL over

GSM WITH USER PROGRAMABLE NUMBER FEATURES:
The project is to develop a wireless energy meter
reading and load control. The reading of the energy
185

MC
8051

15199

MC
8051

17599

MC
8051

Touch
screen

GSM

RF

IR

187

253

AUTO METRO TRAIN TO SHUTTLE BETWEEN STATIONS:

A robotic vehicle considered as train is connected with
sensors for shuttling between two stations
automatically. It has provision for limiting the number
of passengers entering the train by auto door
management system. Auto start and stop feature from
origin to the destination and back is also available.

16799

MC
8051

16499

MC
PIC

18099

MC
8051

18699

MC
8051

RF

24699

MC
8051

RF

ENERGY METER BILLING WITH LOAD CONTROL over

GSM WITH USER PROGRAMABLE NUMBER FEATURES (
by PIC Microcontroller): The project is to develop a
wireless energy meter reading and load control. The
188 PIC114 reading of the energy meter is also sent by to any cell
phone by a message through GSM modem by user
programable number upon a mis-call which also
receives commands from the cell phone to control the
electrical loads.

189

250

190

238

191

152

SOLAR POWERED AUTO IRRIGATION SYSTEM: The

project uses a solar powered pump operated
automatically for irrigation purpose,on sensing the soil
condition.By using solar power system, dependence on
erratic commercial power is not required. A
microcontroller of 8051 family is used to control the
whole system. A motor is provided as load for
demonstration purpose.
TOUCH SCREEN BASED HOME AUTOMATION SYSTEM:
A touch screen based transmitting unit is used to
operate home appliances with zero voltage switching,
remotely using RF communication to avoid complicated
wiring in existing system and to improve life of the
appliance under use.
FIRE FIGHTING ROBOTIC VEHICLE: The project is
designed to develop a fire fighting robot using RF
technology for remote operation. The robotic vehicle is
loaded with water tanker and a pump which is
controlled over wireless communication to throw water.
An 8051 series of microcontroller is used for the desired
operation.

IR

GSM

Touch
screen

WAR FIELD SPYING ROBOT WITH NIGHT VISION

WIRELESS CAMERA: The project is designed to develop
a robotic vehicle using RF technology for remote
operation attached with wireless camera for monitoring
192

153 purpose. The robot along with camera can wirelessly

transmit real time video with night vision capabilities.
This is kind of robot can be used for spying purpose in
war fields. An 8051 series of microcontroller is used for
the desired operation.

23999

MC
8051

RF

26899

MC
8051

RF

29499

MC
8051

PICK N PLACE WITH SOFT CATCHING GRIPPER: The

project is designed to develop a pick n place robotic
vehicle with a soft catching gripper. For example, it can
193

194

151 safely handle a bomb very carefully to avoid explosion

while catching. The robotic vehicle is RF controlled for
remote operation. An 8051 series of microcontroller is
used for the desired operation.

255

Touch screen based remote controlled robotic vehicle

for stores management: The project is designed to
control a robotic vehicle with a touch screen display
unit for remote operation. The touch screen remote
control is used at the transmitting side to transmit RF
control signals. At the receiving end, a pick n place
robotic vehicle is used to respond to those signals and
perform the task. An 8051 series of microcontroller is
used for the desired operation.

Touch
screen

Technogroovy Systems India Pvt Ltd www.technogroovy.com [email protected]

+91-7500347448,+917533940322
like our page for more updates:
https://www.facebook.com/Technogroovyindia
With Best Regard's
Technogroovy Systems India Pvt. Ltd.
www.technogroovy.com
Call+91-9582888121
Whatsapp- +91-8800718323