Process Instrumentation and Analytics

At the heart of your efficiency

Oil and gas industry

Answers for industry.

PIA Life Cycle Portal

The PIA Life Cycle Portal is a web-based application for easy and convenient product
selection and configuration.

Controlling cost, ensuring safety

and delivering quality
Were in an era where efficiency is more important than ever for the oil and gas industry. Our devices give you the precision
you need to control cost, ensure safety and deliver quality.
An energy transformation is underway. Hydrocarbons
face increased competition from new sources of
energy. Reserves are increasingly difficult to access.
Partnering with Siemens gives the precision, integration and reliability that you need to help address these
trends and ensure efficiency at the heart of your
operations.
Right across the oil and gas value chain
Siemens offers solutions for your process instrumentation and analytics needs across the oil and gas
industry value chain from the upstream all the way
through midstream pipelines and storage to downstream refining and distribution. You can be sure of
better asset management. Our devices give you the
measurement, maintenance and diagnostics functions

you need to translate data and alerts into early and

effective action.

not limited to a conversation about an individual

device or process.

A comprehensive solution
And you dont need to look further than Siemens. We
not only give you accuracy and reliability of process
instrumentation and analytics measurement but also
the reassurance of seamless integration with your
planning, management control and other systems.
As one of the worlds leading automation suppliers,
Siemens can give you a one-stop shop solution for
your automation requirements and also integrate that
upwards into PCS and MES systems.

Designed with your needs in mind

Our technology is designed to fit with the tough and
often remote situations encountered in the oil and
gas industries. Solutions such as remote-mounted
transmitters, heavy-duty dust-tight enclosures and
non-contacting sensors all mean that you can avoid
accidents and hazardous situations.

Our comprehensive portfolio gives you the reassurance that a dialogue with Siemens can be about
what is right for the overall facility or operation and

With Siemens you have the reassurance of best-inclass products and a partner who understands your
industry.
Discover more in this brochure and at:
www.siemens.com/sensors/industries

How to get access

You can access the PIA Life Cycle Portal around-the-clock
at www.siemens.com/piaportal. It offers you active
support to find the best solution from the extensive
Siemens portfolio of sensors and process analytical
products. The portal can be used to see how different
solutions can be put to use in process and factory
automation.
You can choose between several selection access
options to find the appropriate product solution for
your specific requirements:
Direct access sends you straight to a specific con
figuration if you know the product you are seeking.
Guided selection lets you to select the appropriate
application, technology or industry and specify
the measurement task based on the various relevant
parameters for your particular application.

Advantages at a glance:
Convenient product selection support with
answers to typical questions
A variety of selection possibilities: see
the sample processes and simply select from the
recommended process instrumentation and
analytics products
Project lists for an order enquiry can be quickly
created
Different possibilities for processing data and
information
No separate installation needed
Product selection for spare parts
The latest product data and information for
Siemens process instrumentation and analytics
www.siemens.com/pia-portal

Scan to
explore the
PIA Life
Cycle Portal

Product range
Level measurement
Point Level

Pointek CLS200

Pointek CLS300

Pointek CLS500

SITRANS LVL100/200

SITRANS LVS100/200

SITRANS Probe LR

Brief
description

Inverse frequency shift capacitance level switches with optional

rod/cable choices and configurable output.

Inverse frequency shift capacitance level switches with optional

rod/cable choices and configurable output.

Inverse frequency shift capacitance level switch for detecting inter

faces, solids, liquids, toxic and aggressive chemicals in critical conditions of high temperature and pressure.

Brief
description

Compact and standard vibrating point level switches for high or low
levels of liquids and slurries.

Vibrating point level switches for high or low level

detection of dry powder and granular bulk solids.

2-wire, 6GHz pulse radar level transmitter for basic continuous

monitoring of liquids in storage vessels.

Features
and benefits

Ideal for detecting liquids, solids, slurries, foam and interfaces in

demanding conditions
Unaffected by product buildup on the probe
Requires no metal container wall as reference capacitance
No vibrating mechanical components
Explosion-proof with IS probe

Ideal for detecting liquids, solids, slurries, foam and interfaces in demanding conditions where high pressure and temperature are present
Unaffected by product buildup on the probe
Requires no metal container wall as reference capacitance
Simple installation and maintenance
No vibrating mechanical components

Patented Active-Shield technology so measurement is unaffected by

material buildup in active shield section
2-wire loop powered with solid-state switch or 4 to 20/20 to 4mA output
Simple push-button calibration and integrated local display
Full function diagnostics
HART communications for remote commissioning and inspection
Microprocessor-based electronics provide one-point calibration

Features
and benefits

Proven vibrating level switch technology for liquids

Compact insertion length of 40mm (1.57) for confined space
applications
Fault monitoring for corrosion, loss of vibration or line break to the
piezo drive
SIL 2 qualified for high level and dry run applications

Compact design
Will switch at the correct level, even with low-density products
Rotatable enclosure
Self-cleaning fork
Remote electronics option

Process Intelligence echo processing

Hermetically sealed shielded polypropylene rod
antenna with threaded process connection

Range

Rod: 5.5m (18 ft)

Cable: up to 30m (98 ft)

Rod: 1m (40")
Cable: 25m (82 ft)

1m (40")

Range

40mm 4m (1.57" ... 13 ft)

LVS100: 170mm 4m (6.7" ... 13 ft)

LVS200: 165mm 20m (6.5" ... 65 ft)

20m (66 ft)

Accuracy

Repeatability 1%

Repeatability 1%

Accuracy

Repeatability: 0.1mm
Hysteresis approx. 2mm with vertical installation
Switching delay a
pprox. 500 ms (on/off)

Switching delay 1sec

the greater of 0.1% of range or 10 mm (0.4")

Process
temperature

40 ... 125C (40 to 257F)

40 ... 400 C (40 ... 752F)

60 ... 400C (76 ... 752F)

Process
temperature

LVL100: 150C max. (302F)

LVL200: 250C max. (482F)

150C max. (302F)

40 ... 80C (40 ... 176F)

Process
pressure

Rod: up to 25bar g (365 psi g)

Cable: up to 10bar g (145 psi g)

Up to 35bar g (511 psi g)

Up to 150 bar g (2175 psi g)

Process
pressure

LVL100: 1 ... 64bar g (14.5 ... 928 psi g)

LVL200: 1 ... 64bar g (14.5 ... 928 psi g)

Up to 10bar g (145 psi g)

Up to 3bar g (43.5 psi g)

Typical
applications

Level and interface detection, overfill protection in tanks. Liquids, slurries, powders, granules, pressurized applications, hazardous areas.

Level and interface detection, overfill protection in tanks. Liquids, slurries,

bulk solids, relatively high pressure and temperature, hazardous areas.

Foam or liquid/foam level, glycol regenerators, high-pressure

coalescers, LNG applications.

Typical
applications

Detection of high, low, demand levels in liquids, pump protection,

hazardous areas and critical applications up to SIL 2.

Detection of high, low, demand levels in solids.

Drilling mud tanks.

 ore information:
M
www.siemens.com/pointekcls200

Radar

 ore information:
M
www.siemens.com/pointekcls300

 ore information:
M
www.siemens.com/pointekcls500

 ore information:
M
www.siemens.com/sitranslvl100
www.siemens.com/sitranslvl200

 ore information:
M
www.siemens.com/sitranslvs100
www.siemens.com/sitranslvs200

 ore information:
M
www.siemens.com/sitransprobelr

Level measurement
Radar

SITRANS LR200

SITRANS LR250

SITRANS LR560

Brief
description

2-wire, 6GHz pulse radar level transmitter for continuous monitoring

of liquids or slurries in process vessels.

2-wire, 25GHz pulse radar level transmitter for continuous monitoring

of all types of hydrocarbon liquids and slurries.

2-wire, 78GHz FMCW radar level transmitter for continuous monitoring

of solids in silos to a range of 100 m (328 ft).

Features
and benefits

Cost-effective solution using either a horn antenna for large openings or a PTFE rod antenna for openings as small as 50mm (2"")
Low-frequency microwave transmitter offering high immunity to
buildup, condensation, vapor and steam
Process Intelligence and Auto False-Echo Suppression
HART and PROFIBUS PA options available

Resistant to buildup or vapors through non-contacting microwave

technology
Available with antenna options: horn, PVDF encapsulated or PTFE
faced flange
Built-in Process Intelligence prevents interference from the agitators
and vessel obstructions commonly found in waste fuel tanks
Resistance to a broad range of chemicals allows for instrumentation
standardization throughout the plant
HART, PROFIBUS PA or FOUNDATION Fieldbus options available

Range

20m (66 ft)

Accuracy

Capacitance

SITRANS LG250

SITRANS LG270

SITRANS LC500

Brief
description

Guided wave radar transmitters for level, level/interface, and volume

measurement of liquids and solids.

Guided wave radar transmitters for level, level/interface, and volume

measurement of liquids and solids.

Inverse frequency shift capacitance level and interface transmitter for

extreme and critical process conditions.

Process Intelligence advanced echo processing for

unparalleled performance
Easy to install
Narrow beam angle
Graphical Quick Start Wizard for easy and fast setup
Virtually unaffected by dust or temperature changes
Air purge connection included
Aimer flange for optimizing readings in the silo cone area

Features
and benefits

Advanced Diagnostics available for high degree of safety

Simple menu-driven display offers ease of setup
Large range of options offers reliability in most continuous measurement applications
Ease of maintenance through module design and field replaceable
and adjustable probe options
Suitable for extreme pressure and temperature conditions
Highly immune to buildup/replaceable probes/measures
low dk/able to determine dk of application

Advanced Diagnostics for high degree of safety

Simple menu-driven display offers ease of setup
Large range of options offers reliability in most continuous measurement applications
Ease of maintenance through module design and field replaceable
and adjustable probe options
Universally applicable in liquids, interface, slurries and solids
Highly immune to buildup
Steam compensation/low dk

Patented Active-Shield technology

Easy installation through push-button calibration
Integrated local display
Full-function diagnostics
Inverse frequency approach provides high resolution

20m (66 ft)

40m (131 ft)

Option: 100m (328 ft)

Range

300 mm ... 75 m (11.811" ... 246 ft)

300 mm ... 60 m (11.811" ... 197 ft)

Rod: 0.3 ... 5.5m (1 ... 18 ft)

Cable: 1 ... 35m (3 ... 115 ft)

0.1% of measuring range or 10 mm (0.4 inch)

3mm (0.118")

Greater of 25mm (1 inch) or 0.25% of range

Accuracy

2mm (0.08")

2mm (0.08")

Process
temperature

40 ... 200C (40 ... 392F)

40 ... 200C (40 ... 392F) at process connection with FKM O-ring

40 ... 200C (40 392F)

Process
temperature

40 ... 200C

196 ... 450C (321 ... 842F)

50 ... 200C (58 ... 392F)

200 ... 200C (328 ... 392F): special order

Process
pressure

Up to 40bar g (580 psi g), process connection type-dependent

Up to 40bar g (580 psi g), process connection type-dependent

Up to 3bar g (43.5 psi g)

Process
pressure

1 100bar (100 40,000 kPa) vessel pressure

1 400bar (100 40,000 kPa) vessel pressure

Up to 150bar g (2175 psi g)

Typical
applications

Level monitoring of liquids and slurries in process and storage tanks

of all types incl. vertical, horizontal and spherical tanks, cryogenic,
underground and tanks with stilling well. Process vessels with severe
conditions including turbulence, foam or material buildup.

Level monitoring in process and storage tanks of all types. Heavy and
light crude, sour and sweet crude, any condensate and produced water
application.

Level measurement of proppants like frac sand and ceramics (widely

used in horizontal drilling applications hydraulic fracturing), plastic
pellets and powders.

Typical
applications

Highly flexible solution for liquid level and interface applications.

Extremely versatile solutions for storage, separation of materials
or difficult ammonia applications.

Extreme conditions including high temperature and high pressure

applications: harsh applications in chemical, HPI and energy industries
i.e. LPG gas tanks, steam boilers and distillation columns.

Level measurement in liquids, vapors and foam under extreme

operational conditions, interface detection (e.g. oil, water, gas) LNG.

 ore information:
M
www.siemens.com/sitranslr200

Guided wave radar

 ore information:
M
www.siemens.com/sitranslr250

 ore information:
M
www.siemens.com/sitranslr560

 ore information:
M
www.siemens.com/lg

 ore information:
M
www.siemens.com/lg

 ore information:
M
www.siemens.com/lc500

Flow measurement
Clamp-on ultrasonic

SITRANS FUH1010 (Oil)

SITRANS FUG1010

SITRANS FUT1010

SITRANS F C MASS 2100

SITRANS F C MASS 6000 Ex d

SITRANS FC430

Brief
description

For hydrocarbon applications. Available in three versions: Standard

Volume, Precision Volume and Interface Detector. It demonstrates
high-level performance under a wide range of viscosities.

SITRANS FUG1010 advantages include, tolerance of challenging wet

gas conditions. It also measures standard volume flow for fixed gas
compositions without needing a separate flow computer.

Both versions for gas or liquid feature the unique TransLoc mounting
system, the sensors are permanently installed on a supplied pipe
section appropriately sized for the application.

Brief
description

Coriolis mass flowmeters for exact mass flow, volume flow, density and
temperature measurements.

Transmitter for coriolis flowmeter for the measurement of mass

flow, volume flow, Brix, Plato, density, temperature and fraction
flow. Functions include dosing of liquids and gases.

Complete flowmeter system for a variety of liquid and gas applications.

Provides multiparameter and high accurate measurement of mass flow,
density, temperature and fraction.

Features
and benefits

Standard volume
Exceptional repeatability is maintained, independent of changes in
temperature, density or viscosity
Precision volume
Precise measurement is maintained with automatic Reynolds Number
compensation for temperature and viscosity changes
Interface detection
Outputs liquid density and API as a replacement for intrusive densitometers

Tolerates most wet gas conditions

Relay alarms triggered when a change in gas composition is detected
Data extraction and analysis through Si-Ware diagnostics tool
Resistant to pressure reducing valve noise
Accommodates permanent and direct burial installations with optional
rugged Hi-Precision Mount enclosure

Meets performance requirements of API and AGA

Allows continuous operation despite water or gas contamination
Permits application and operation diagnostics
Accommodates easy scraper and pig detection
Size/pipeline diameter: DN 100 to DN 600 (4"" to 24"")
Lab calibrated to allow for use in high-performance applications

Features
and benefits

Accuracy of density measurements better than 0.001g/cm3

Single-bended pipe without internal welding seams
Maximum pipe wall thickness for optimal service life, corrosion
resistance and high pressure resistance
Balanced pipe construction for optimal performance

High zero stability, excellent dynamic response to variations

of flow
Multiparameter outputs, individually configurable to mass flow,
volume flow, density, temperature or fraction flow, e.g. Brix or Plato
Fast batch mode and short response time with an
update rate of 30Hz
SENSORPROM technology automatically configures the transmitter
during start-up

Offers high accuracy over a range of flow rates

Multiparameter measurement enables simultaneous monitoring of
density leading to higher dosage quality
Coriolis technology enables measurement of non-conducting liquids
Advanced communications allow access to the multiple measuring
parameters being measured
Available in compact or remote versions

Range

0.5 to 1.0% at 0.3 m/s (1ft/s)

Calibratable 0.15 to 0.3%

12% of actual volume reading

Liquids: 0.15% at 0.3 m/s (1 ft/s)

Gas: 0.2% at 0.3 m/s (1 ft/s)

Range

Accuracy

Measuring range 12m/s (40 ft/s) bidirectional

Pipe range DN 6 to DN 9140 (0.25 ... 360")

30m/s (100 ft/s) bidirectional

Liquid: 12m/s (40 ft/s), bidirectional

Gas: 30m/s (100 ft/s), bidirectional

Accuracy

< 0.1% of mass flow

Typically 0.1% of actual mass flow

0.10%

Process
temperature

Ambient temperature 18 ... 60C (0 ... 140F)

Liquid temperature 40 ... 120C (40 ... 248F)

Ambient temperature 18 ... 60C (0 ... 140F)

Gas temperature* 40 ... 120C (40 ... 250F)

Liquid 28 ... 93 C (20 ... 200 F)

Process
temperature

50 180C (58 356F)

50 ... 200C (58 ... 392F)

Process
pressure

Typical minimum pressure: 7 ... 10 bar (100 ... 145 psi)

Process
pressure

Measuring tubes:
Stainless steel up to 100bar (1450 psi)
Hastelloy C22 up to 160bar (2320 psi)

Typical
applications

Flow measurement on hydrocarbon liquids, interface detection,

product identification, auto batch control, pig detection etc.

Ideal for natural and process gas applications, including allocation,

production, storage and gas-fired power station applications.

High-precision flow measurement of hydrocarbon liquids and gases, pipeline balancing and refinery blending, production wells, and gas processing.

Typical
applications

Liquids and gases, dosing, multiparameter measurement incl. mass

flow rate, volume, density, fraction flow and temperature.

Custody transfer, according to OIML R117 (liquids other than water);

safety-critical applications up to SIL 3.

 ore information:
M
www.siemens.com/fusclampon

Coriolis

 ore information:
M
www.siemens.com/fusclampon

 ore information:
M
www.siemens.com/fusclampon

 ore information:
M
www.siemens.com/sitransfcmass2100

 ore information:
M
www.siemens.com/sitransfcmass6000

 ore information:
M
www.siemens.com/sitransfc430

Flow measurement
Coriolis

Electromagnetic

Vortex

Inline ultrasonic

SITRANS F M MAG 3100 P

SITRANS FX300

SITRANS F US SONO 3100/FUS060

SITRANS FCS200 sensor

SITRANS F C MC2

SITRANS F M MAG 6000 I/6000 I Ex de

Brief
description

Ultra-compact sensor that fits in where space is crucial, providing extra

flexibility in any compressed natural gas (CNG) application.

Accuracy better than 0.15% of the mass flow rate. The meter is easy
to install and is recognized for its high accuracy and wide turndown
which is paramount in many applications.

Microprocessor-based transmitter engineered for high performance,

easy installation, commissioning and maintenance.

Brief
description

Sensor is designed to meet the most common specifications within the

chemical and process industries. It has PTFE or PFA liners and Hastelloy
electrodes being the ideal combination.

Vortex flowmeter with accurate volumetric and mass flow measurement of steam, gases and liquids as an all-in-one solution with
integrated temperature and pressure compensation.

Flowmeter system consisting of a SITRANS FUS060 transmitter and

SITRANS F US SONO 3100 sensor with O-ring or flange transducers.

Features
and benefits

Wide range of different connections available

Fast fueling due to high capacity
Flexible sensor program as it is available in three sizes ensuring a
broad application fit within dispensers, compressors and distribution
Enhanced safety due to standard built-in rupture discs, which reduce
personal hazard in the event of pipe fracture
SENSORPROM enables true Plug & Play installation
High accuracy

Parallel S-tube design and optimal oriented inductive sensors enhances

accuracy and turndown range
Rigid enclosure design reduces the influence from pipeline vibration and
thermal stress
SENSORPROM enables cost-efficient installation and commissioning
Enhanced safety with superior safe Ex-design
EEx em [ib] IIC; DN 40: II 1/2
EEx em [ib] IIC T2-T6, DN 50: II 2G EEx em [ib] IIC T2-T6

Superior signal resolution for optimal turndown ratio

Built-in advanced batch control
Comprehensive diagnostic and service menu enhancing troubleshooting and meter verification
SENSORPROM technology facilitates easy setup and replacement with
automatically re-programming of any new transmitter
USM II platform enables fitting of add-on bus modules without loss of
functionality and all modules can be fitted as true Plug & Play

Features
and benefits

Short lead time 5 days + transportation

Excellent chemical resistance also during high process temperature
Designed to allow patented MAG in-situ verification using the
SENSORPROM fingerprints
Approved for hazardous areas

Maintenance-free due to fully welded sensor construction providing

excellent stability and reliability
Combines three measuring instruments in one device without
additional equipment, installation or cabling costs
Saves downtime because of isolation valve, which makes an exchange of pressure sensor possible without interrupting the process
Easy installation because of Plug & Play
Redundant system as a dual transmitter version is available

Standard version is delivered as a 2-path sensor with or without

flanges; 4 paths are available upon request
Available pipe materials carbon steel (stainless steel on request)
Comes in sizes from DN 100 to DN 600 (4" to 24"), (others on request)
Easy exchange of integrated transducers in running process
Designed for remote installation in hazardous as well as non-
hazardous environments

Range

Measuring range 250 ... 30,000 kg/h (9.2 ... 1,102.3 lbs/min)

Standard version: 2,130 ... 510,000 kg/h (78 ... 18,739 Ibs/min)
Hygienic version: 230 ... 113,400 kg/h (8.45 ... 4,167 Ibs/min)

Range

0 ... 10 m/s (0 ... 32 ft/s)

28 ... 13,200m3/h (depends on size)

Accuracy

0.5%

0.15% of rate

0.2% 1 mm/s (0.04 inch/s)

Accuracy

0.2% 1 mm/s (0.04 inch/s)

Steam and gases: 1%

Liquids: 0.75%

0.5% of flow rate

Process
temperature

Ambient temperature 40 ... 60C (40 ... 140F)

Medium temperature 40 ... 125C (40 ... 257F)

50 ... 180C (58 ... 356F)

Process
temperature

Ambient temperature: 40 ... 100C (40 ... 212F)

Medium temperature: 20 ... 130/150C (4 ... 266/302F)

Ambient temperature: 40 ... 85 C (40 ... 185 F)

Medium temperature: 40 ... 240 C (40 ... 464 F)

Medium temperature: 20 ... 200 C (4 ... 392 F) ;

(on request: down to 200 C [328 F])

Process
pressure

Max 350bar (5076 psi)

Max 100bar (1450 psi)

Process
pressure

Max 40bar (580 psi)

Max PN40 and CL300 pressure rating

Typical
applications

CNG (compressed natural gas)

Dosing within chemical and pharma (dosing of chemicals),

Food & beverage (milk, cream, pastes) and oil.

Flow measurement, water injection & frac water reclaim and delivery
applications, industrial water treatment

Typical
applications

Volume and mass flow measurement of steam, liquids (e.g. crude oil)
and gases (e.g. off-gas).

Ideal for challenging applications within the oil flow, distribution and
on/offshore industries. Optimal solution for fiscal metering as it meets
OIML R117 requirements.

 ore information:
M
www.siemens.com/fcs200

10

 ore information:
M
www.siemens.com/sitransf

 ore information:
M
www.siemens.com/sitransfm

 ore information:
M
www.siemens.com/sitransfm

 ore information:
M
www.siemens.com/sitransfx300

 ore information:
M
www.siemens.com/sitransfus

11

Pressure measurement

Temperature measurement

SITRANS P DS III

SITRANS P500

SITRANS P280

SITRANS TH Family

SITRANS TF

SITRANS TF280

Brief
description

Series of digital pressure transmitters for measuring gauge pressure,

absolute pressure, differential pressure, flow and level.

Advanced pressure transmitter for measuring differential pressure,

flow and level with highest measuring accuracy.

WirelessHART pressure transmitter that provides all measured process

values as well as diagnostic information, parameters and functions via
radio.

Brief
description

Series of head-mounted transmitters for a variety of applications.

Field transmitter for harsh industrial applications.

WirelessHART temperature transmitter that provides all measured

process values as well as diagnostic information, parameters and
functions via radio.

Features
and benefits

Remote mounting capability allows isolation from high temperatures

and vibration sources
Local display and local programming with push buttons, accessible
without opening the enclosure
Robust design
Advanced communications and predictive maintenance functions
enable optimization of maintenance cycles

High measuring accuracy

Very fast response time and extremely good long-term stability
High reliability even under extreme chemical and mechanical loads
For aggressive and non-aggressive gases, vapors and liquids
Extensive diagnosis and simulation functions which can be used
both on site as well as via HART
Optional separate replacement of measuring cell and electronics
without recalibration
Short process flanges enable space-saving installation

Supports the WirelessHART standard for a flexible pressure

measurement
Enables cost savings on wiring for locations with difficult installation
conditions, like in remote areas of plants, and on moving or rotating
equipment
Device meets IP65 degree of protection
Powered by an internal battery and designed for ultralow power
consumption

Features
and benefits

Measures temperature with a linear output signal

High accuracy across entire ambient temperature range
Reduces plant noise
Alarm signal for sensor break or short circuit according NAMUR 43
Explosion-protected executions for US, Canada and Europe
Slim design, ideal for upgrade of installed PT100 probes with a
20mA signal
Rugged design, fully potted electronic

Local sensing of measured values over digital display

Rugged two-chamber enclosure in die-cast aluminum or stainless
steel with degree of protection IP67
Universal sensor input for resistance thermometer, thermocouple
element, Ohm or mV signal
SIL 2, SIL 2/3
Wide range of approvals for use in potentially explosive atmospheres.
Intrinsically safe, non-sparking and flameproof type of protections

Supports the WirelessHART standard for flexible temperature

measurement
Enables cost savings on wiring for locations with difficult installation
conditions, like in remote areas of plants, and on moving or rotating
equipment
Device meets IP65 degree of protection
Powered by an internal battery and is designed for ultralow power
consumption

Range

1 mbar (0.4 inch H2O) 700bar (10,150 psi)

0 to 1.25 mbar (0 to 0.2 psi) ... 0 to 32 bar (0 to 464 psi)

0 to 1.6 bar (0 to 23 psi) ... 0 to 320 bar (0 to 4,641 psi)

Range

40 ... 85 C (40 ... 185 F)

40 ... 85C (40 ... 185 F)

40 ... 85C (40 ... 185 F)

Accuracy

0.075%

0.03%

0.25% of full scale; max. 0.25% of sensors span

Accuracy

Analog accuracy 0.02% of measurement range

Digital accuracy 0.1 C for PT100

Analog accuracy 0.02% of measurement range

Digital accuracy 0.1 C for PT100

< 0.04% of the measuring range

Process
temperature

40 100C (40 ... 212 F)

40 125C (40 ... 257 F)

40 85C (40 ... 185 F)

Process
temperature

Depends on different RTD or TC sensor input

Depends on different RTD or TC sensor input

200 850C (328 ... 1562 F)

Process
pressure

Max 700 bar (10,150 psi) gauge pressure

Max 30 bar (435 psi) (PN420) differential pressure

Max 32 bar (464 psi) (PN160) differential pressure

Max 320bar gauge pressure

Max 320 bar (4,641 psi) absolute pressure

Process
pressure

Typical
applications

Flow measurement with orifice plate, feed water applications.

Wellhead control topsides and hydraulic power units.

Wireless pressure measurement.

Typical
applications

Head-mounted transmitter with wide range of applications.

Field transmitter for field mount transmitter for tough conditions and modern process industries which require high accuracy stability and reliability.

Wireless temperature measurement.

 ore information:
M
www.siemens.com/sitranspds3

12

 ore information:
M
www.siemens.com/sitransp500

 ore information:
M
www.siemens.com/sitransp280

 ore information:
M
www.siemens.com/sitransth

 ore information:
M
www.siemens.com/sitranstf

 ore information:
M
www.siemens.com/sitranstf280

13

Temperature measurement

Positioning

Weighing

Gas analysis
Process gas chromatography

SITRANS TS Series

SIPART PS2

SIWAREX WL270 and SIWAREX U

SITRANS CV

MicroSAM

MAXUM edition II

Brief
description

Temperature sensor for a wide range of measuring goals from basic

applications to solutions in harsh environments.

Positioner for linear and part-turn actuators. Optional a non-contacting

sensor for extreme vibrations and remote applications.

Weighing modules for all simple weighing and force measuring tasks.

Brief
description

Micro process gas chromatograph as dedicated calorific value (CV/BTU)

analyzer.

Micro process gas chromatograph.

Process gas chromatograph.

Features
and benefits

Exchangeable during operation

Wide application range due modular design
Explosions protection according to ATEX and IEC EX intrinsic safety,
flameproof and non-sparking
With optional local indicator
Use of standard components even for individual configurations

Maximum flexibility for any application

Push buttons, display, binary input, diagnostics as standard
Easy and fast commissioning
Extremely low air consumption
Modular extension of modules and spare parts
Usable for all environments
Communication via HART, PROFIBUS PA or FOUNDATION Fieldbus
International certified

SIWAREX WL270:
Wide load range from 2 to 500t
Legal for trade
SIWAREX U
Uniform design technology and consistent communication
High resolution of 65,000 parts and an accuracy of 0.05%
Supports theoretical adjustment without adjustment weights
Can be used for Ex-applications

Features
and benefits

Fast analysis through innovative MEMS technology

Precision through valveless live injection and switching
High separation performance through narrow-bore capillary columns
Low detection limits through powerful detectors
High linearity over the entire measuring range saves calibration gases
Easy and safe operation using CVControl software

Lower operational costs due to reduced power and utility gas

requirements; no instrument air necessary
Option of mounting in the field
Cost-effective installation, minimal infrastructure requirements
Precise measurement results thanks to multidetection. Thermal
conductivity detectors monitor the entire separation path
Use of MAXUM edition II software reduces training requirements
Simple remote control with Windows-based software and Ethernet

Use one MAXUM edition II to get the functionality of several GCs

Separate complex analytical tasks into simple parallel tasks
Cost of ownership: Flexible oven concept results in low consumption
of air and energy
Numerous oven configurations
Wide range of detectors including FID, TCD, FPD, PDD (HID, PID, or
ECD mode)

Range

Standard: 40 80 C (40 ... 176 F); option: 40 100 C (40 ... 212 F)

30 ... 100/3 ... 130 mm (0.12 ... 5.12") (larger strokes on request)

Range

Fix configurations for energy measurements

Free configurable; depends on application

Free configurable; depends on application

Accuracy

SIWAREX U: 0.05%
SIWAREX WL270: C3 to OIML R60; 3,000 intervals WL270 K with 0.1%

Accuracy

Depends on the conditions; ideally < 0.1%

Depends on the conditions; ideally < 0.1%

Depends on the conditions; ideally < 0.1%

Process
temperature

Measuring point connection head:

Pt 100 Basic: 30 ... 400C; Pt 100 extended: 196 ... 600C
Thermocouple 196 ... 1100C (depends on type of TC)
40 100C (85C with transmitter)

Process temperature is related to the valve and actuator

Ambient temperature of positioner: 30 ... 80 C (22 ... 176 F)

Process
temperature

Maximal sample temperature 120C (248 F)

Maximal sample temperature 120C (248 F)

Gas and liquid sample: maximum sample temperature

122C (252 F), higher temperature optional

Process
pressure

Depending on thermowell diam. and lengths:

Up to 75bar (1,088 psi) (type 2 and 3)
Up to 500bar (7,252 psi) (form 4), depending on material

Process
pressure

Appr. 60 kPa depends on the analytical methods

(200 kPa below carrier gas pressure minimum)

Maximal sample pressure 10 ... 60 kPa

Minimum sample pressure 14 kPa (gas sample),100 kPa (liquid

sample), maximum sample pressure 517 kPa (gas sample), 5000 kPa
(liquid sample) (lower and higher pressure optional)

Typical
applications

Measurement in pipes and vessels.

Control Valves, On/Off Valve.

Gravimetric measurement of level in tanks, truck weighing in loading

areas.

Typical
applications

Analysis of natural gas quality and its physical properties, calorific value
measurement, fiscal metering.

Analytical process monitoring and control.

Chemical composition analysis of gases and liquids in refining and

hydrocarbon processing industries.

 ore information:
M
www.siemens.com/sitransts

14

 ore information:
M
www.siemens.com/sipartps2

 ore information:
M
www.siemens.com/siwarex

 ore information:
M
www.siemens.com/sitranscv

 ore information:
M
www.siemens.com/microsam

 ore information:
M
www.siemens.com/maxum

15

Gas analysis

Communication and software

Continuous gas analysis

WirelessHART communication components

Software

Remote displays

SITRANS AW200

SITRANS AW210

SIMATIC PDM

SITRANS RD500

Extractive OXYMAT 6/61

In-situ SITRANS SL, LDS 6

Extractive ULTRAMAT 6

Brief
description

Oxygen measurements in gases based on the paramagnetic

alternating pressure method.

In-situ gas analyzers for measurement of gas concentrations directly in

the process scan even under extreme conditions.

Measures highly selectively up to four infrared active components in a

single unit.

Brief
description

Battery-powered WirelessHART adapter to integrate

devices with standard wired HART or 4 20 mA.

WirelessHART adapter to integrate standard wired HART

or 4 20 mA devices into a WirelessHART network.

Tool for configuration, parameterization, commissioning, diagnostics and maintenance of field devices.

Remote data manager for monitoring and data logging, web access, and alarming for instrumentation.

Features
and benefits

Paramagnetic alternating pressure principle:

Small measuring ranges absolute linearity
Detector element has no contact with the sample gas:
Suitable for use in harsh environments, long service life
EEx(p) for zones 1 and 2 according to ATEX 2G
and ATEX 3G (OXYMAT 6 field device only)
Open interface architecture (RS 485, RS 232, PROFIBUS)

Real-time measurement
Extremely rugged design
High long-term stability through built-in maintenance-free and process
independend reference gas cell
No field calibration required
Suitable for connection to Ex sensors in accordance
with II 1G Ex ia op is IIC T4 Ga, II 1 D Ex ia op is IIIC T135C Da

Low detection limits for measurements at low concentrations

Corrosion-resistant materials in gas path (option) for measurement in
highly corrosive sample gases
Heated versions (option) for use in presence of gases condensing at
low temperature
EEx(p) for zones 1 and 2 according to ATEX 2G and ATEX 3G (field
device only)

Features
and benefits

Connects up to four HART devices in multidrop mode

All four HART process variables of every connected
device are transmitted without any loss of accuracy
Connects one 4 ... 20 mA device w/o HART
Configurable with standard tools support EDD
e.g. SIMATIC PDM, HART handheld communicator
Power-up single connected device with the internal
battery or devices can be powered externally

Connects up to eight HART devices in multidrop mode

All four HART process variables of every connected
device are transmitted without any loss of accuracy
Connects one 4 ... 20 mA device w/o HART
Configurable with standard tools support EDD
e.g. SIMATIC PDM, HART handheld communicator
Adapter and field devices powered externally
Can be used in hazardous areas

Allows the user to configure field devices of different manufacturers using a single user interface
Process device data can be easily set, changed,
checked for plausibility, managed and simulated
Monitors selected process values, alarms and
status signals of devices online
Allows backup parameters and diagnostics
As point-to-point or as integrated part of control system

Integrated web and ftp server, email and sms for

alarming, and up to 2 GB for data-logging
Simple access to data remotely installed devices
Collects and sends sensor data to logistics systems
providing up-to-date, timely, and accurate information. Ethernet or Modem (PSTN/GSM/GPRS)
carries data to your desktop without the need of
additional software.

Range

Smallest measuring range: 00.5% (OXYMAT 6); 02% (OXYMAT 61)

O2: LDS 6: 05% (0600C), 015% (6001200C); 0100%;

SITRANS SL: 01%, 0100%

Dependent on the application

Range

Accuracy

< 1% (detection limit)

O2: LDS 6: 2% / 5%, depending on sample gas component

and application code

< 1% (detection limit)

Accuracy

Process
temperature

Below the gas dew point, but 0 ... 50 C (32 ... 122 F) (OXYMAT 6
heated field-housing version: max. 145C [293 F])

O2: 0 ... 600 C (32 ... 1112 F), 600 ...1200 C (1112 ... 2192 F)
(LDS 6 only)

0 ... 50 C (32 ... 122 F), but above the dew point

Process
temperature

Process
pressure

OXYMAT 6: 500 ... 1500 hPa; field version: 500 ... 3000 hPa
OXYMAT 61: 800 ... 1200 hPa

O2: LDS 6: 950 ... 1050 hPa, 950 ... 5000 hPa (0 ... 200C)
SITRANS SL: 900 ... 1100 hPa, 700 ... 5000 hPa (0 ... 200C)

600 ... 1500 hPa; field version: 600 ... 1500 hPa,
Ex (leakage compensation) 600 ... 1160 hPa,
Ex (continuous purging) 600 ... 1500 hPa

Process
pressure

Typical
applications

Process control, plant safety monitoring, gas analysis,

emission monitoring

Concentration measurement in combustible gases, safety monitoring,

oxygen monitoring in tanks, pipes, flares, FCCs.

Process control and optimization, personnel and plant safety, product

quality control, emission monitoring

Typical
applications

Integration of power-independent or isolated

measurement points.

Increase transparency via WirelessHART if wired HART

communication is not supported by the infrastructure.

Configuration, parameterization, commissioning,

diagnostics and maintenance of field devices.

Remote monitoring of inventory levels, process and

oil and gas applications.

 ore information:
M
www.siemens.com/oxymat6
www.siemens.com/oxymat61

16

 ore information:
M
www.siemens.com/lds6
www.siemens.com/sitranssl

 ore information:
M
www.siemens.com/ultramat6

 ore information:
M
www.siemens.com/sitransaw200

 ore information:
M
www.siemens.com/sitransaw210

 ore information:
M
www.siemens.com/simatic-pdm

 ore information:
M
www.siemens.com/sitransrd500

17

Communication and software

Industrial Ethernet Switches SCALANCE X

Industrial Ethernet Switches RUGGEDCOM

SCALANCE XR-500

SCALANCE XM-400

SCALANCE XR-300

RX5000

RX1500

RSG2488

Brief
description

Fully/partly modular, high-performance, layer 3 19" rack switches

(routers) for the setup of electrical and/or optical networks.

High-performance, layer 3 extendable switches (routers) in SIMATIC

S7-1500 design for the setup of electrical and/or optical networks.

Fully/partly modular, high-performance, layer 2 19" rack switches for

the setup of electrical and/or optical networks.

Brief
description

High port density routing and switching platform designed to operate

in harsh environments.

Compact, cost-efficient utility grade layer 2 and layer 3 rack switch and
router.

Utility grade, field upgradable, non-blocking 28 Gigabit port layer 2

switch with hot-swappable dual redundant power supplies.

Communication

Gigabit Ethernet (IEEE 803.2)

Gigabit Ethernet (IEEE 803.2)

Gigabit Ethernet (IEEE 803.2)

Communication

Gigabit Ethernet

Gigabit Ethernet

Industrial Ethernet

Operating
temperature

0 ... 60C (32 ... 140 F)

40 ... 70C (40 ... 158 F)

40 ... 70C (40 ... 158 F)

Operating
temperature

40 ... 85C

40 ... 85C

40 ... 85C

Transmission
rate

10/100/1000 Mbit/s
10 Gbit/s

10/100/1000 Mbit/s

10/100/1000 Mbit/s

Transmission
rate

10/100/1000 Mbit/s
10 Gbit/s

10/100/1000 Mbit/s

10/100/1000 Mbit/s

Ports

Up to 52 ports by using 4-port media modules (CU/FO)

Up to 12 PoE ports
Media module options with fixed FO ports or SFP
Various SFP options

Up to 16 ports in one device (Full Gigabit)

Extendable to up to 24 ports
Up to 16 PoE ports
Various SFP options

Up to 24 ports by using 2-port media modules

Up to 8 PoE ports
Media module options with fixed FO ports or SFP
Various SFP options

Ports

Up to 96 ports (10/100 TX)

Up to 10 Gigabit uplinks
Up to 24 Gigabit ports
Up to 48 optical ports (100FX)

Up to 24 ports (100FX, 10/100TX, 10FL/100SX)

Up to 8 Gigabit Ethernet
Up to 24 serial ports

28 Gigabit ports (100FX or 1000SX, 10/100/1000TX)

Important
features and
benefits

Flexibility in network expansions and modifications

High availability due to redundant power supply, redundancy functions
design and easy device replacement
VLAN, SNMP, PROFINET diagnostics, email notification
Easy upgrading of layer 3 functions

Flexibility in network expansions and modifications

High availability due to redundant power supply, redundancy
functions, fanless design and easy device replacement
Easy upgrading of layer 3 functions
Mobile diagnostics by smartphone or tablet via WLAN

Flexibility in network expansions and modifications

High availability due to redundant power supply, redundancy
functions, fanless design and easy device replacement
VLAN, SNMP, PROFINET diagnostics, email notification

Important
features and
benefits

Designed for harsh environmental demands

19" rack design
High port density routing and switching platform

Hot-swappable dual redundant power supplies

19" rack switch
Rugged and modular
Layer 2 and layer 3 switch and router
Optional redundant power supply

Hot-swappable dual redundant power supplies

19" rack switch
Reduces rack space needs
Increases network availability

Distances up to

Up to 200km (124 mi), depending on media modules/SFPs

Up to 200km (124 mi), depending on SFPs

Up to 200km (124 mi), depending on media modules/SFPs

Distances up to

90km (55.9 mi)

90km (55.9 mi)

70km (43.5 mi)

Typical
applications

Onshore and offshore productions (e.g. wellhead/gas field

monitoring and control), setup of plant networks

Onshore and offshore productions (e.g. wellhead/gas field

monitoring and control), setup of plant networks

Onshore and offshore productions (e.g. wellhead/gas field

monitoring and control), setup of plant networks

Typical
applications

Utility and industrial network applications

Electric power utilities, the industrial plant floor, rail and traffic

Electric power utilities, the industrial plant floor, rail and traffic

 ore information:
M
www.siemens.com/x-500

18

 ore information:
M
www.siemens.com/x-400

 ore information:
M
www.siemens.com/x-300

 ore information:
M
www.siemens.com/ruggedcom/switches

 ore information:
M
www.siemens.com/ruggedcom/switches

 ore information:
M
www.siemens.com/ruggedcom/switches

19

Communication and software

Industrial Ethernet Switches RUGGEDCOM

Industrial Wireless LAN SCALANCE W

Modems and Router SCALANCE M

Industrial WAN RUGGEDCOM

Industrial Security SCALANCE S

RS900

SCALANCE W786

SCALANCE W788

SCALANCE M874

RUGGEDCOM WIN

SCALANCE S623

Brief
description

9-port utility grade, fully managed Ethernet switch, specifically

designed to operate reliably in electrically harsh and climatically
demanding environments.

Industrial Wireless LAN access point for use outdoors, for setting up
Industrial Wireless LANs (IWLAN) with 2.4GHz or 5 GHz.

Industrial Wireless LAN access point for use indoors, for setting up
Industrial Wireless LANs (IWLAN) with 2.4GHz or 5 GHz.

Brief
description

IP-Router for the connection to remote networks via public communication infrastructures, i.e. mobile radio networks.

High-power broadband wireless product portfolio designed for private

networks with carrier-grade 4G technology to critical infrastructure
applications in harsh environments.

Protect devices or Ethernet network segments and data transmission

with integrated firewall, VPN. Secure, redundant connection of underlaid networks due to router and firewall redundancy.

Communication

Industrial Ethernet

WLAN (IEEE 802.11n)

WLAN (IEEE 802.11n)

Communication

Mobile Radio (22.5G, 3 G)

IEEE 802.16e

Industrial Ethernet

Operating
temperature

40 ... 85C (40 ... 185F)

40 ... 60C (40 ... 140F)

20 ... 60C (4 ... 140F)

For EEC: 40 ... 70C (40 ... 158F)

Operating
temperature

20 ... 60C (4 ... 140F)

40 ... 65C (40 ... 32F)

40 60C (40 ... 140F)

Transmission
rate

10/100 Mbit/s

450 Mbit/s

450 Mbit/s

Transmission
rate

10/100 Mbit/s

10/100 Mbit/s

10/100/1000 Mbit/s

Ports

6 ports (Base10/100BaseTX)
Option for 3 additional copper ports
Option for 3 additional fiber ports

Up to 6 R-SMA
RJ45
PoE
SFP"

Up to 6 R-SMA
RJ45
PoE
M12

Ports

1 x R-SMA
RJ45

N-Connect
PoE
M12

RJ45
DMZ

Important
features and
benefits

Hot-swappable dual redundant power supplies

19" rack switch
Reduces rack space needs
Increases network availability

MIMO technology (Multiple Input, Multiple Output)

Installation indoors
Outdoor use
Wireless real-time communication using PROFINET with PROFIsafe via
KEY-PLUG W700 iFeatures

MIMO technology (Multiple Input, Multiple Output)

Use indoors or control cabinet
Degree of protection up to IP65
Wireless real-time communication using PROFINET with PROFIsafe via
KEY-PLUG W700 iFeatures

Important
features and
benefits

VPN (IPSec)
Firewall
NAT

MIMO technology (Multiple Input, Multiple Output)

Installation outdoors
Reliable and rugged (IP67)

VPN (IPSec)
Firewall

Distances up to

90km (55.9 mi)

Up to 1000m (0.62 mi)

Up to 1000m (0.62 mi)

Distances up to

Worldwide, depending on mobile radio network availability

Typical
applications

Electric power utilities, the industrial plant floor, rail and traffic

Onshore and offshore productions (e.g. wellhead/gas field

monitoring and control), outdoor installations

Onshore and offshore productions (e.g. wellhead/gas field

monitoring and control), control cabinet

Typical
applications

Pipelines, compressors and pumping stations

(e.g. SCADA Pipeline/Telecontrol)

Onshore and offshore productions, e.g. interconnection of oil rigs,

installation on poles, walls

Protection of industrial automation networks

Secure remote access

 ore information:
M
www.siemens.com/ruggedcom/switches

20

 ore information:
M
www.siemens.com/iwlan

 ore information:
M
www.siemens.com/iwlan

 ore information:
M
www.siemens.com/remote-networks

 ore information:
M
www.siemens.com/ruggedcom

 ore information:
M
www.siemens.com/industrialsecurity

21

ERP Enterprise Resource Planning

Totally
Integrated
Automation

Product Design
Production Planning and Simulation
Data Management

PLM Product Lifecycle Management

Management Level

MES Manufacturing Execution Systems

Plant Engineering
COMOS

SIMATIC IT

Ethernet

Products from the controller level to the

field level
With Totally Integrated Automation (TIA),
Siemens is the only provider of an end-to-end
integrated portfolio of products and systems
for the automation of the entire production
workflow.

Operations Level

Totally Integrated Automation reduces the

complexity of the automation solution and
enables what really counts: the practical combination of optimally coordinated individual
components without interface problems.

Control Level

SIMATIC PCS 7
Operation System

Maintenance/Asset
Management

Engineering
Station

Energy
Management

SIMATIC WinCC
SCADA System

Industrial Ethernet

TIA Portal

SIMATIC PCS 7
Automation
Systems

SINUMERIK
Computer Numeric Control

SIMOTION
Motion Control

SIMATIC NET
Industrial
Communication

SIMATIC Controllers
Modular/PC-based

SIMATIC HMI
Human Machine Interface

SIRIUS Industrial Controls

Totally Integrated Automation integrates

not only the p
roduction process but all parts
of the company from the field level to the
management level. The result: aperfectly
coordinated overall concept that enables
higher productivity.
PROFINET

Field Level

Industrial Ethernet
PROFIBUS

PROFIBUS PA
Process Instrumentation

Totally
Integrated
Automation

SIMATIC Ident
Industrial Identification

SIMATIC Distributed I/O

SITOP Power Supplies

AS-Interface
KNX GAMMA instabus

HART

Low-Voltage Distribution

IO-Link

22

SINAMICS Drive Systems

Totally
Integrated
Power

Example: SIMATIC PCS 7. The

innovative process control system
offers numerous options for
connecting I/Os as well as for
sending and receiving process
signals via sensors and actuators.

SIMOTICS Motors

23

More information:
www.siemens.com/sensors/oil-gas

Siemens AG
Industry Sector
Sensors and Communication
76181 KARLSRUHE
GERMANY

Subject to change without prior notice 09/14

Article No.: E20001-A1021-P780-X-7600
DISPO 27900
WS 09148.0
Printed in Germany
Siemens AG 2014

The information provided in this brochure contains merely

general descriptions or characteristics of performance which
in case of actual use do not always apply as described or which
may change as a result of further development of the products. An obligation to provide the respective characteristics
shall only exist if expressly agreed in the terms of contract.
All product designations may be trademarks or product names
of Siemens AG or supplier companies whose use by third
parties for their own purposes could violate the rights of the
owners.