Remote Sensing: Introduction and Basic Concepts

Basic concepts of remote sensing

MODULE 1 LECTURE NOTES 1

BASIC CONCEPTS OF REMOTE SENSING
1. Introduction
Remote sensing is an art and science of obtaining information about an object or feature
without physically coming in contact with that object or feature. Humans apply remote
sensing in their day-to-day business, through vision, hearing and sense of smell. The data
collected can be of many forms: variations in acoustic wave distributions (e.g., sonar),
variations in force distributions (e.g., gravity meter), variations in electromagnetic energy
distributions (e.g., eye) etc. These remotely collected data through various sensors may be
analyzed to obtain information about the objects or features under investigation. In this
course we will deal with remote sensing through electromagnetic energy sensors only.
Thus, remote sensing is the process of inferring surface parameters from measurements of the
electromagnetic radiation (EMR) from the Earths surface. This EMR can either be reflected
or emitted from the Earths surface. In other words, remote sensing is detecting and
measuring electromagnetic (EM) energy emanating or reflected from distant objects made of
various materials, so that we can identify and categorize these objects by class or type,
substance and spatial distribution [American Society of Photogrammetry, 1975].

Fig. 1. Schematic representation of remote sensing technique

(Source: http://geoportal.icimod.org)

D Nagesh Kumar, IISc, Bangalore

M1L1

Remote Sensing: Introduction and Basic Concepts

Basic concepts of remote sensing

Remote sensing provides a means of observing large areas at finer spatial and temporal
frequencies. It finds extensive applications in civil engineering including watershed studies,
hydrological states and fluxes simulation, hydrological modeling, disaster management
services such as flood and drought warning and monitoring, damage assessment in case of
natural calamities, environmental monitoring, urban planning etc.
Basic concepts of remote sensing are introduced below.
2. Electromagnetic Energy
Electromagnetic energy or electromagnetic radiation (EMR) is the energy propagated in the
form of an advancing interaction between electric and magnetic fields (Sabbins, 1978). It
travels with the velocity of light. Visible light, ultraviolet rays, infrared rays, heat, radio
waves, X-rays all are different forms of electro-magnetic energy.
Electro-magnetic energy (E) can be expressed either in terms of frequency (f) or wave length
() of radiation as
E=hcf

or

hc/

(1)

where h is Planck's constant (6.626 x 10-34 Joules-sec), c is a constant that expresses the
celerity or speed of light (3 x 108 m/sec), f is frequency expressed in Hertz and is the
wavelength expressed in micro meters (1m = 10-6 m).
As can be observed from equation (1), shorter wavelengths have higher energy content and
longer wavelengths have lower energy content.
Distribution of the continuum of energy can be plotted as a function of wavelength (or
frequency) and is known as the EMR spectrum (Fig. 2).

D Nagesh Kumar, IISc, Bangalore

M1L1

Violet

10-4 10-3

Blue

10

Green

102

103

Yellow Orange

104

105

106

107

108

109

Red
Near
Infrared

Ultraviolet
Wavelength 0.40
(m)

Radio waves

10-2 10-1

Microwave

Thermal infrared

Ultraviolet rays

Basic concepts of remote sensing

Visible light
Near Infrared

Wave
10-6 10-5
length (m)

X rays

Gamma rays

Remote Sensing: Introduction and Basic Concepts

0.48

0.54

0.58

0.60

0.65

Fig. 2. Electromagnetic radiation spectrum

In remote sensing terminology, electromagnetic energy is generally expressed in terms of

wavelength, .
All matters reflect, emit or radiate a range of electromagnetic energy, depending upon the
material characteristics. In remote sensing, it is the measurement of electromagnetic radiation
reflected or emitted from an object, is the used to identify the target and to infer its properties.
3. Principles of Remote Sensing
Different objects reflect or emit different amounts of energy in different bands of the
electromagnetic spectrum. The amount of energy reflected or emitted depends on the
properties of both the material and the incident energy (angle of incidence, intensity and
wavelength). Detection and discrimination of objects or surface features is done through the
uniqueness of the reflected or emitted electromagnetic radiation from the object.
A device to detect this reflected or emitted electro-magnetic radiation from an object is called
a sensor (e.g., cameras and scanners). A vehicle used to carry the sensor is called a
platform (e.g., aircrafts and satellites).

D Nagesh Kumar, IISc, Bangalore

M1L1

Remote Sensing: Introduction and Basic Concepts

Basic concepts of remote sensing

Main stages in remote sensing are the following.

A. Emission of electromagnetic radiation

The Sun or an EMR source located on the platform

B. Transmission of energy from the source to the object

Absorption and scattering of the EMR while transmission

C. Interaction of EMR with the object and subsequent reflection and emission
D. Transmission of energy from the object to the sensor
E. Recording of energy by the sensor

Photographic or non-photographic sensors

F. Transmission of the recorded information to the ground station

G. Processing of the data into digital or hard copy image
H. Analysis of data
These stages are shown in Fig. 3.

Fig.3 Important stages in remote sensing

D Nagesh Kumar, IISc, Bangalore

M1L1

Remote Sensing: Introduction and Basic Concepts

Basic concepts of remote sensing

4. Passive/ Active Remote Sensing

Depending on the source of electromagnetic energy, remote sensing can be classified as
passive or active remote sensing.
In the case of passive remote sensing, source of energy is that naturally available such as the
Sun. Most of the remote sensing systems work in passive mode using solar energy as the
source of EMR. Solar energy reflected by the targets at specific wavelength bands are
recorded using sensors onboard air-borne or space borne platforms. In order to ensure ample
signal strength received at the sensor, wavelength / energy bands capable of traversing
through the atmosphere, without significant loss through atmospheric interactions, are
generally used in remote sensing
Any object which is at a temperature above 0o K (Kelvin) emits some radiation, which is
approximately proportional to the fourth power of the temperature of the object. Thus the
Earth also emits some radiation since its ambient temperature is about 300o K. Passive
sensors can also be used to measure the Earths radiance but they are not very popular as the
energy content is very low.
In the case of active remote sensing, energy is generated and sent from the remote sensing
platform towards the targets. The energy reflected back from the targets are recorded using
sensors onboard the remote sensing platform. Most of the microwave remote sensing is done
through active remote sensing.
As a simple analogy, passive remote sensing is similar to taking a picture with an ordinary
camera whereas active remote sensing is analogous to taking a picture with camera having
built-in flash (Fig. 5).

D Nagesh Kumar, IISc, Bangalore

M1L1

Remote Sensing: Introduction and Basic Concepts

Basic concepts of remote sensing

Fig. 5 Schematic representation of passive and active remote sensing

5. Remote Sensing Platforms
Remote sensing platforms can be classified as follows, based on the elevation from the
Earths surface at which these platforms are placed.

Ground level remote sensing

o Ground level remote sensors are very close to the ground
o They are basically used to develop and calibrate sensors for different features
on the Earths surface.

Aerial remote sensing

o Low altitude aerial remote sensing
o High altitude aerial remote sensing

Space borne remote sensing

o Space shuttles
o Polar orbiting satellites
o Geo-stationary satellites

From each of these platforms, remote sensing can be done either in passive or active mode.

D Nagesh Kumar, IISc, Bangalore

M1L1

Remote Sensing: Introduction and Basic Concepts

Basic concepts of remote sensing

Fig. 6. Remote sensing platforms

(Modified from http://www.ilmb.gov.bc.ca/risc/pubs/aquatic/aerialvideo/assets/figure1.gif)

6. Airborne and Space-borne Remote Sensing

In airborne remote sensing, downward or sideward looking sensors mounted on aircrafts are
used to obtain images of the earth's surface. Very high spatial resolution images (20 cm or
less) can be obtained through this. However, it is not suitable to map a large area. Less
coverage area and high cost per unit area of ground coverage are the major disadvantages of
airborne remote sensing. While airborne remote sensing missions are mainly one-time
operations, space-borne missions offer continuous monitoring of the earth features.
LiDAR, analog aerial photography, videography, thermal imagery and digital photography
are commonly used in airborne remote sensing.
In space-borne remote sensing, sensors mounted on space shuttles or satellites orbiting the
Earth are used. There are several remote sensing satellites (Geostationary and Polar orbiting)
providing imagery for research and operational applications. While Geostationary or

D Nagesh Kumar, IISc, Bangalore

M1L1

Remote Sensing: Introduction and Basic Concepts

Basic concepts of remote sensing

Geosynchronous Satellites are used for communication and meteorological purposes, polar
orbiting or sun-synchronous satellites are essentially used for remote sensing. The main
advantages of space-borne remote sensing are large area coverage, less cost per unit area of
coverage, continuous or frequent coverage of an area of interest, automatic/ semiautomatic
computerized processing and analysis. However, when compared to aerial photography,
satellite imagery has a lower resolution.
Landsat satellites, Indian remote sensing (IRS) satellites, IKONOS, SPOT satellites, AQUA
and TERRA of NASA and INSAT satellite series are a few examples.
7. Ideal Remote Sensing System
The basic components of an ideal remote sensing system include:
i.

A Uniform Energy Source which provides energy over all wavelengths, at a constant,
known, high level of output

ii.

A Non-interfering Atmosphere which will not modify either the energy transmitted
from the source or emitted (or reflected) from the object in any manner.

iii.

A Series of Unique Energy/Matter Interactions at the Earth's Surface which generate

reflected and/or emitted signals that are selective with respect to wavelength and also
unique to each object or earth surface feature type.

iv.

A Super Sensor which is highly sensitive to all wavelengths. A super sensor would be
simple, reliable, accurate, economical, and requires no power or space. This sensor
yields data on the absolute brightness (or radiance) from a scene as a function of
wavelength.

v.

A Real-Time Data Handling System which generates the instance radiance versus
wavelength response and processes into an interpretable format in real time. The data
derived is unique to a particular terrain and hence provide insight into its physicalchemical-biological state.

vi.

Multiple Data Users having knowledge in their respective disciplines and also in remote
sensing data acquisition and analysis techniques. The information collected will be
available to them faster and at less expense. This information will aid the users in
various decision making processes and also further in implementing these decisions.

D Nagesh Kumar, IISc, Bangalore

M1L1

Remote Sensing: Introduction and Basic Concepts

Basic concepts of remote sensing

Fig. 7 Components of an ideal remote sensing system

8. Characteristics of Real Remote Sensing Systems
Real remote sensing systems employed in general operation and utility have many
shortcomings when compared with an ideal system explained above.
i.

Energy Source: The energy sources for real systems are usually non-uniform over
various wavelengths and also vary with time and space. This has major effect on the
passive remote sensing systems. The spectral distribution of reflected sunlight varies
both temporally and spatially. Earth surface materials also emit energy to varying
degrees of efficiency. A real remote sensing system needs calibration for source
characteristics.

ii.

The Atmosphere: The atmosphere modifies the spectral distribution and strength of the
energy received or emitted (Fig. 8). The effect of atmospheric interaction varies with
the wavelength associated, sensor used and the sensing application. Calibration is
required to eliminate or compensate these atmospheric effects.

D Nagesh Kumar, IISc, Bangalore

M1L1

Remote Sensing: Introduction and Basic Concepts

Basic concepts of remote sensing

Fig. 8. Interactions of the electromagnetic energy with the atmosphere

(Source: https://earth.esa.int/)
iii.

The Energy/Matter Interactions at the Earth's Surface: Remote sensing is based on the
principle that each and every material reflects or emits energy in a unique, known way.
However, spectral signatures may be similar for different material types. This makes
differentiation difficult. Also, the knowledge of most of the energy/matter interactions
for earth surface features is either at elementary level or even completely unknown.

iv.

The Sensor: Real sensors have fixed limits of spectral sensitivity i.e., they are not
sensitive to all wavelengths. Also, they have limited spatial resolution (efficiency in
recording spatial details). Selection of a sensor requires a trade-off between spatial
resolution and spectral sensitivity. For example, while photographic systems have very
good spatial resolution and poor spectral sensitivity, non-photographic systems have
poor spatial resolution.

v.

The Data Handling System: Human intervention is necessary for processing sensor
data; even though machines are also included in data handling. This makes the idea of
real time data handling almost impossible. The amount of data generated by the sensors
far exceeds the data handling capacity.

vi.

The Multiple Data Users: The success of any remote sensing mission lies on the user
who ultimately transforms the data into information. This is possible only if the user
understands the problem thoroughly and has a wide knowledge in the data generation.
The user should know how to interpret the data generated and should know how best to
use them.

D Nagesh Kumar, IISc, Bangalore

10

M1L1

Remote Sensing: Introduction and Basic Concepts

Basic concepts of remote sensing

9. Advantages and Disadvantages of Remote Sensing

Advantages of remote sensing are:
a) Provides data of large areas
b) Provides data of very remote and inaccessible regions
c) Able to obtain imagery of any area over a continuous period of time through which the
any anthropogenic or natural changes in the landscape can be analyzed
d) Relatively inexpensive when compared to employing a team of surveyors
e) Easy and rapid collection of data
f) Rapid production of maps for interpretation
Disadvantages of remote sensing are:
a) The interpretation of imagery requires a certain skill level
b) Needs cross verification with ground (field) survey data
c) Data from multiple sources may create confusion
d) Objects can be misclassified or confused
e) Distortions may occur in an image due to the relative motion of sensor and source

D Nagesh Kumar, IISc, Bangalore

11

M1L1