+400C
THERMINOL VP-1
+350C
Heat Transfer Fluids By
+300C
VP-1
Vapour Phase
Liquid Phase
Heat Transfer Fluid
12C to
400C
+250C
+200C
+150C
+100C
+50C
+0C
-50C
-100C
THERMINOL VP-1
Therminol VP-1 liquid/vapour phase heat transfer fluid, is a stable,
high temperature medium that delivers process heat at temperatures up to 400C with reliability and precise control.
Therminol VP-1 is a eutectic mixture of 73.5% diphenyl oxide /
26.5% diphenyl, and as such can be used in existing liquid, or
vapour phase systems, for top-up or replacement of heat transfer
fluids of the same composition. Vapour phase operation is possible
at temperature above 257C.
Therminol VP-1 is based on raw materials of high purity produced by a first intent manufacturing process. This results in a
reduced level of high boiler formation, superior thermal stability
and benefits to the user in terms of extended fluid life and
dependable trouble-free system operation.
Therminol VP-1 is thermally stable and suitable for operation over
long periods at bulk temperatures up to 370-400C.
Flammability
Heat Tracing System
Since Therminol VP-1 heat transfer fluid solidifies at 12C, precautions must be taken to ensure lines do not freeze, particularly in
outdoor installations. Heat tracing must be installed wherever lines
run a danger of cooling below this point. All pipelines and equipment
which may contain stagnant liquid should be traced, including all
streams, vapour, drain and charge lines.
Although the DP/DPO eutectic can burn at elevated temperature,
its chemical nature is such that its use as heat transfer medium in a
properly designed and operated system does not normally constitute a serious fire or explosion hazard. Vapour freed into the air
rapidly cools to below the fire point. High pressure mists, however,
can form an explosive mixture with air.
Thermal Stability at 400C
Thermal stability of a heat transfer is one of the most important
considerations in the selection of a fluid for operation under specific heat transfer conditions. Therminol VP-1 has a reputation for
outstanding stability in operation.
Typical Physical, Chemical and Thermal Properties
of Therminol VP-1
Composition
Diphenyl oxide/diphenyl
Appearance
Clear, sediment free liquid
Max. bulk temperature
400C
Max. film temperature
430C
Kinematic viscosity @ 40C
DIN 51562 - 1
2.48 mm2/s (cSt)
Density @ 15C
DIN 51757
1068 kg/m3
Flash point
DIN EN 22719
110C
DIN 51376
124C
Fire point
ISO 2592
127C
Autoignition temperature
DIN 51794
621C
Pour point
ISO 3016
12C
Boiling point @ 1013 mbar
257C
Coefficient of thermal expansion
0.00097/C
Moisture content
DIN 51777 - 1
< 300 ppm
Total acidity
DIN 51558 - 1
< 0.2 mg KOH/g
Chlorine content
DIN 51577 - 3
< 10 ppm
Copper corrosion
EN ISO 2160
<< 1a
Average molecular weight
166
Note: Values quoted are typical values obtained in the laboratory from production samples. Other samples might exhibit slightly different data. Specifications are subject to change. Write
to Solutia for current sales specifications.
THERMINOL VP-1
Temperature
Density
Thermal
Conductivity
Heat
Capacity
kg/m3
W/m.K
kJ/kg.K
12
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
360
370
380
390
400
410
420
425
1071
1064
1056
1048
1040
1032
1024
1015
1007
999
991
982
974
965
957
948
940
931
922
913
904
895
886
877
867
857
848
838
828
817
806
796
784
773
761
749
736
723
709
694
679
662
654
0,137
0,136
0,135
0,134
0,133
0,132
0,131
0,130
0,129
0,128
0,126
0,125
0,124
0,123
0,121
0,120
0,118
0,117
0,115
0,114
0,112
0,111
0,109
0,107
0,106
0,104
0,102
0,100
0,098
0,096
0,095
0,093
0,091
0,089
0,086
0,084
0,082
0,080
0,078
0,076
0,073
0,071
0,070
1,523
1,546
1,575
1,604
1,633
1,662
1,690
1,719
1,747
1,775
1,803
1,831
1,858
1,886
1,913
1,940
1,968
1,995
2,021
2,048
2,075
2,101
2,128
2,154
2,181
2,207
2,234
2,260
2,287
2,314
2,341
2,369
2,397
2,425
2,454
2,485
2,517
2,551
2,588
2,628
2,674
2,729
2,760
Viscosity
Dynamic
mPa.s
5,48
4,29
3,28
2,60
2,12
1,761
1,492
1,284
1,119
0,985
0,875
0,784
0,707
0,642
0,585
0,537
0,494
0,457
0,424
0,395
0,368
0,345
0,324
0,305
0,288
0,272
0,258
0,244
0,232
0,221
0,211
0,202
0,193
0,185
0,177
0,170
0,164
0,158
0,152
0,146
0,141
0,137
0,134
Enthalpy
Latent
Heat vap.
Kinematic
mm2/s**
Vapour
pressure
(absolute)
kPa*
kJ/kg
kJ/kg
5,12
4,03
3,10
2,48
2,03
1,707
1,458
1,265
1,111
0,986
0,884
0,798
0,726
0,665
0,612
0,566
0,526
0,491
0,460
0,432
0,407
0,385
0,366
0,348
0,332
0,317
0,304
0,292
0,281
0,271
0,262
0,254
0,246
0,239
0,233
0,227
0,222
0,218
0,214
0,211
0,208
0,206
0,205
0,5
0,8
1
2
3
5
7
9
13
18
24
32
42
54
68
86
108
133
163
198
239
286
340
401
470
548
635
732
840
959
1090
1230
1390
1470
0
12,3
27,9
43,8
60,0
76,4
93,2
110,3
127,6
145,2
163,1
181,3
199,7
218,4
237,4
256,7
276,2
296,0
316,1
336,5
357,1
378,0
399,1
420,5
442,2
464,1
486,3
508,8
531,6
554,6
577,8
601,4
625,2
649,3
673,7
698,4
723,4
748,8
774,4
800,5
827,0
854,0
867,7
419,0
414,7
409,3
403,9
398,6
393,3
388,1
382,9
377,8
372,7
367,6
362,6
357,5
352,6
347,6
342,7
337,7
332,8
327,9
323,0
318,0
313,0
308,0
303,0
297,9
292,7
287,5
282,2
276,8
271,2
265,6
259,7
253,8
247,6
241,3
234,7
227,8
220,7
213,2
205,3
197,0
188,0
183,3
* 1 bar = 100 kPa - ** 1 mm2/s = 1 cSt
Properties of Therminol VP-1 vs Temperatures - Liquid Phase
Note: Values quoted are typical values obtained in the laboratory from production samples. Other samples might exhibit slightly different data. Specifications are subject to change. Write
to Solutia for current sales specifications.
Physical Property Formulae of Liquid
Density (kg/m3) = - 0,90797 * T(C) + 0,00078116 * T2(C) - 2,367 * 10-6 * T3(C) + 1083,25
Heat capacity ( kJ/kg.K ) = + 0,002414 * T(C) + 5,9591 * 10-6 * T2(C) - 2,9879 * 10-8 * T3(C) + 4,4172 * 10-11 * T4(C) + 1,498
Thermal Conductivity (W/m.K) = - 8,19477 * 10-5 * T(C) - 1,92257 * 10-7 * T2(C) + 2,5034 * 10-11 * T3(C) - 7,2974 * 10-15 * T4(C) + 0,137743
2
Kinematic viskosity (mm /s) = e
544,149
T(C)+114,43
-2,59578
Vapour pressure (kPa) = - 0,190859 * T(C) + 4,35824 * 10-3 * T2(C) - 3,6106 * 10-5 * T3(C) + 1,08408 * 10-7 * T4(C) + 2,12329
Latent Heat Vaporisation (kJ/kg) = - 0,528933 * T(C) - 7,50103 * 10-5 * T2(C) + 1,5622 * 10-6 * T3(C) - 3,771 * 10-9 * T4(C) + 425,18
THERMINOL VP-1
Temperature
Density
Thermal
Conductivity
Heat
Capacity
Enthalpy*
Dynamic
Viskosity
kg/m3
W/m.K
kJ/kg.K
kJ/kg
mPa.s
0,0081
0,0085
0,0090
0,0095
0,0100
0,0105
0,0110
0,0116
0,0121
0,0126
0,0132
0,0137
0,0143
0,0149
0,0154
0,0160
0,0166
0,0171
0,0177
0,0183
0,0189
0,0195
0,0201
0,0207
0,0213
0,0220
0,0226
0,0232
0,0238
0,0245
0,0251
0,0258
0,0264
0,0271
0,0277
0,0284
0,0291
0,0298
0,0304
0,0311
0,0318
0,0325
0,975
1,003
1,037
1,070
1,104
1,137
1,170
1,203
1,235
1,267
1,299
1,331
1,362
1,393
1,424
1,454
1,484
1,514
1,543
1,572
1,601
1,629
1,657
1,685
1,712
1,739
1,766
1,792
1,819
1,845
1,871
1,897
1,923
1,948
1,974
2,001
2,027
2,054
2,082
2,111
2,142
2,175
419,0
427,0
437,2
447,7
458,6
469,7
481,3
493,2
505,4
517,9
530,7
543,9
557,2
571,0
585,0
599,4
613,9
628,8
644,0
659,5
675,1
691,0
707,1
723,5
740,1
756,8
773,8
791,0
808,4
825,8
843,4
861,1
879,0
896,9
915,0
933,1
951,2
969,5
987,6
1005,8
1024,0
1042,0
0,0057
0,0059
0,0061
0,0063
0,0065
0,0067
0,0069
0,0071
0,0073
0,0075
0,0077
0,0079
0,0081
0,0083
0,0085
0,0087
0,0089
0,0091
0,0094
0,0096
0,0098
0,0100
0,0102
0,0104
0,0106
0,0108
0,0110
0,0112
0,0114
0,0116
0,0118
0,0120
0,0122
0,0124
0,0126
0,0128
0,0130
0,0132
0,0134
0,0136
0,0138
0,0140
12
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
190
200
210
220
230
240
250
260
270
280
290
300
310
320
330
340
350
360
370
380
390
400
410
420
0,042
0,065
0,099
0,148
0,214
0,303
0,422
0,575
0,772
1,02
1,33
1,71
2,17
2,72
3,38
4,17
5,09
6,17
7,42
8,86
10,5
12,4
14,6
17,0
19,8
22,9
26,5
30,5
35,0
40,1
45,8
52,4
* the enthalpy basis is ideal gas at 12C
Properties of Therminol VP-1 vs Temperatures - Vapour Phase
Note: Values quoted are typical values obtained in the laboratory from production samples. Other samples might exhibit slightly
different data. Specifications are subject to change. Write to Solutia for current sales specifications.
Physical Property Formulae of Vapour
Density (kg/m3) = - 0,0303917 * T(C) + 4,34615 * 10-4 * T2(C) - 2,41006 * 10-6 * T3(C) + 5,33458 * 10-9 * T4(C) + 0,553905
Heat Capacity ( kJ/kg.K ) = + 0,003703 * T(C) - 3,0274 * 10-6 * T2(C) + 2,9324 * 10-9 * T3(C) + 0,92709
Dynamic Viskosity (mPa.s) = + 2,0124 * 10-5 * T(C) + 3,4557 * 10-9 * T2(C) - 7,1288 * 10-12 * T3(C) + 0,005449
Thermal Conductivity (W/m.K) = + 4,84257 * 10-5 * T(C) + 2,9067 * 10-8 * T2(C) - 6,5306 * 10-12 * T3(C) + 0,0075110
THERMINOL VP-1
The Therminol Range
Quality Management
Therminol VP-1 is one of the of the Solutia synthetic heat transfer
fluids covering an operating range from -85C to +400C, suitable
for most process heating or waste heat recovery applications, and
capable of operation at or near atmospheric pressure within their
recommended operating temperature range.
All our manufacturing units have obtained ISO 9002 quality control certification. This registration means that plant procedures,
quality control systems, material sampling, product storage, handling, packaging, shipping, product literature and characteristic
data, record keeping and other company procedures are in line with
the quality requirements of the ISO 9002 standards and its other
national equivalents.
This is your quality assurance.
As a users process temperature demands change there is
always a Therminol fluid capable of meeting the new requirements.
In addition, Therminol fluids are often interchangeable allowing
conversion by a simple top-up procedure where this is preferred.
Health, Safety and
Environmental Information
Please contact the Solutia Europe/Africa HQ for the Material Safety
Data Sheet, or if any other information concerning health, safety and
environmental issues is required during filling or operation of your
heat transfer system with this product.
Asia
Solutia Singapore Pte. Ltd.
101 Thomson Road - #19-00 United Square Singapore
307591
Tel.: (+65) 355 7231 - Fax: (+65) 254 3138
Latin America
Solutia Brasil Ltda.
Rua Gomes de Carvalho 1306 - 60 andar - conj. 61 e 62
CEP : 04547-005 Vila Olmpia - Sao Paulo, SP, Brasil
Phone: (+55) 11-5087 3000 - Fax: (+55) 11-5087 3030
North America
Solutia Inc.
10300 Olive Boulevard - PO Box 66760
St Louis, MO 63166-6760 - USA
Tel.: (+1) 314 674 10 00
Peoples Republic of China
Solutia Chemical Co. Ltd., Suzhou
9th floor, Kings Tower
16 Shi Shan Road - Suzhou New District - Suzhou, PRC 215011
Phone: (+86) 512 8258167 - Fax: (+86) 512 8250417
Europe
Solutia Europe S.A./N.V.
Rue Laid Burniat 3 - Parc Scientifique - Fleming
B-1348 Louvain-la-Neuve (Sud) - Belgium
Tel.: (+32) 10 48 15 47 - Fax: (+32) 10 48 14 86
http://www.solutia.com
Please contact us for more information :
Therminol is a trademark of Solutia. Therminol has now been adopted as a world-wide brand for the Solutia Heat Transfer Fluid range.
Fluids known previously under the Santotherm and Gilotherm brands are identical in composition and performance to the corresponding
Therminol brand fluids.
The information in this bulletin is to the best of our knowledge true and accurate but all instructions, recommendations or suggestions are made without guarantee. Since the conditions of use are beyond
their control, Solutia Inc. and its subsidiaries disclaim any liability for loss or damage suffered from use of these data or suggestions. Furthermore no liability is accepted if use of any product in accordance with these data or suggestions infringes any patent.
GROUP PROVOC T.B.S 10-04 (12/98) E
