User Manual

Version 1.0
Published April 2013
Copyright2013 ASRock INC. All rights reserved.

Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identification or explanation and to the owners benefit, without intent to
infringe.

Disclaimer:
Specifications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or fitness for a particular
purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of profits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.

CALIFORNIA, USA ONLY

The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate
ASRock Website: http://www.asrock.com

Contents
Chapter 1 Introduction

1.1

Package Contents

1.2 Specifications

1.3 Unique Features

1.4

Motherboard Layout

11

1.5 I/O Panel

13

Chapter 2 Installation

15

2.1

16

Installing the CPU

2.2 Installing the CPU Fan and Heatsink

19

2.3 Installing Memory Modules (DIMM)

20

2.4 Expansion Slots (PCI and PCI Express Slots)

22

2.5 Jumpers Setup

23

2.6 Onboard Headers and Connectors

24

2.7 SLITM and Quad SLITM Operation Guide

28

2.7.1 Installing Two SLITM-Ready Graphics Cards

28

2.7.2 Driver Installation and Setup

30

2.8 CrossFireXTM and Quad CrossFireXTM Operation Guide

31

2.8.1 Installing Two CrossFireXTM-Ready Graphics Cards

31

2.8.3 Driver Installation and Setup

33

Chapter 3 Software and Utilities Operation

34

3.1

34

Installing Drivers

3.2 A-Tuning

35

3.3 Intel Rapid Start Technology

39

3.4 Intel Smart Connect Technology

44

3.5 Intel Remote Wake Technology

49

3.5.1 Configuring and Using MeshCentral

49

3.5.2 Configuring and Using Splashtop

54

3.6 Intel Extreme Tuning Utility (IXTU)

57

3.7 Start8

59

Chapter 4 UEFI SETUP UTILITY

62

4.1

62

Introduction

4.1.1 UEFI Menu Bar

62

4.1.2 Navigation Keys

63

4.2 Main Screen

64

4.3 OC Tweaker Screen

65

4.4 Advanced Screen

74

4.4.1 CPU Configuration

75

4.4.2 Chipset Configuration

77

4.4.3 Storage Configuration

79

4.4.4 Intel Rapid Start Technology

81

4.4.5 Intel Smart Connect Technology

82

4.4.6 Super IO Configuration

83

4.4.7 ACPI Configuration

84

4.4.8 USB Configuration

86

4.5 Tools

87

4.6 Hardware Health Event Monitoring Screen

90

4.7 Boot Screen

91

4.8 Security Screen

94

4.9 Exit Screen

95

Z87 Extreme3

Chapter 1 Introduction
Thank you for purchasing ASRock Z87 Extreme3 motherboard, a reliable
motherboard produced under ASRocks consistently stringent quality control.
It delivers excellent performance with robust design conforming to ASRocks
commitment to quality and endurance.
In this manual, Chapter 1 and 2 contains the introduction of the motherboard
and step-by-step installation guides. Chapter 3 contains the operation guide of the
software and utilities. Chapter 4 contains the configuration guide of the BIOS setup.

Because the motherboard specifications and the BIOS software might be updated, the
content of this documentation will be subject to change without notice. In case any modifications of this documentation occur, the updated version will be available on ASRocks
website without further notice. If you require technical support related to this motherboard, please visit our website for specific information about the model you are using. You
may find the latest VGA cards and CPU support list on ASRocks website as well. ASRock
website http://www.asrock.com.

1.1 Package Contents

ASRock Z87 Extreme3 Motherboard (ATX Form Factor)
ASRock Z87 Extreme3 Quick Installation Guide
ASRock Z87 Extreme3 Support CD
2 x Serial ATA (SATA) Data Cables (Optional)
1 x I/O Panel Shield
1 x ASRock SLI_Bridge_2S Card

English

1.2 Specifications

English
2

Platform

ATX Form Factor

Premium Gold Capacitor design (100% Japan-made highquality Conductive Polymer Capacitors)

A-Style

Home Cloud

CPU

Supports 4th Generation Intel CoreTM i7 / i5 / i3 / Xeon /

Pentium / Celeron in LGA1150 Package
Digi Power Design
8 Power Phase Design
Supports Intel Turbo Boost 2.0 Technology
Supports Intel K-Series unlocked CPU
Supports ASRock BCLK Full-range Overclocking

Chipset

Intel Z87

Memory

Dual Channel DDR3 Memory Technology

4 x DDR3 DIMM slots
Supports DDR3 2933+(OC)/2800(OC)/2400(OC)/2133(OC)/
1866(OC)/1600/1333/1066 non-ECC, un-buffered memory
Max. capacity of system memory: 32GB
(see CAUTION)
Supports Intel Extreme Memory Profile (XMP)1.3/1.2

Expansion
Slot

2 x PCI Express 3.0 x16 slots (PCIE2/PCIE3: single at x16

(PCIE2); dual at x8 (PCIE2) / x8 (PCIE3))
1 x PCI Express 2.0 x1 slots
3 x PCI slots
Supports AMD Quad CrossFireXTM and CrossFireXTM
Supports NVIDIA Quad SLITM and SLITM

Z87 Extreme3

Intel HD Graphics Built-in Visuals and the VGA outputs can

be supported only with processors which are GPU integrated.
Supports Intel HD Graphics Built-in Visuals : Intel Quick

Sync Video with AVC, MVC (S3D) and MPEG-2 Full

HW Encode1, Intel InTruTM 3D, Intel Clear Video HD
Technology, Intel InsiderTM, Intel HD Graphics 4400/4600
Pixel Shader 5.0, DirectX 11.1
Max. shared memory 1792MB
Three VGA Output options: D-sub, DVI-D, and HDMI
Supports Triple Monitors
Supports HDMI Technology with max. resolution up to 4K
2K (4096x2304) @ 24Hz
Supports DVI-D with max. resolution up to 1920x1200 @
60Hz
Supports D-Sub with max. resolution up to 1920x1200 @
60Hz
Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and
HBR (High Bit Rate Audio) with HDMI (Compliant HDMI
monitor is required)
Supports HDCP function with DVI-D and HDMI ports
Supports Full HD 1080p Blu-ray (BD) playback with DVI-D
and HDMI ports

Audio

7.1 CH HD Audio with Content Protection (Realtek ALC892

Audio Codec)
Premium Blu-ray audio support

LAN

Gigabit LAN 10/100/1000 Mb/s

Giga PHY Intel I217V
Supports Intel Remote Wake Technology
Supports Wake-On-LAN
Supports Energy Efficient Ethernet 802.3az
Supports PXE

English

Graphics

Rear Panel
I/O

1 x PS/2 Mouse/Keyboard Port

1 x D-Sub Port
1 x DVI-D Port
1 x HDMI Port
1 x Optical SPDIF Out Port
2 x USB 2.0 Ports

4 x USB 3.0 Ports

1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED
LED)
HD Audio Jack: Rear Speaker / Central / Bass / Line in / Front
Speaker / Microphone

Storage

6 x SATA3 6.0 Gb/s connectors, support RAID (RAID 0,

RAID 1, RAID 5, RAID 10, Intel Rapid Storage Technology
12 and Intel Smart Response Technology), NCQ, AHCI and
Hot Plug functions

Connector

1 x IR header
1 x COM port header
1 x Power LED header
2 x CPU Fan connectors (1 x 4-pin, 1 x 3-pin)
3 x Chassis Fan connectors (1 x 4-pin, 2 x 3-pin)

64Mb AMI UEFI Legal BIOS with Multilingual GUI support

ACPI 1.1 Compliance Wake Up Events
SMBIOS 2.3.1 Support
CPU, DRAM, PCH 1.05V, PCH 1.5V Voltage Multi-adjustment

BIOS
Feature

English
4

1 x Power Fan connector (3-pin)

1 x 24 pin ATX power connector
1 x 8 pin 12V power connector
1 x Front panel audio connector
1 x SPDIF Out connector
2 x USB 2.0 headers (support 4 USB 2.0 ports)
1 x USB 3.0 header (supports 2 USB 3.0 ports)

Z87 Extreme3

Support
CD

Drivers, Utilities, AntiVirus Software (Trial Version), CyberLink MediaEspresso 6.5 Trial, Google Chrome Browser and
Toolbar, Start8, MeshCentral, Splashtop Streamer, Intel
Extreme Tuning Utility (IXTU)

Hardware
Monitor

CPU/Chassis Temperature Sensing

CPU/Chassis/Power Fan Tachometer
CPU/Chassis Quiet Fan (Allow Chassis Fan Speed AutoAdjust by CPU Temperature)
CPU/Chassis Fan Multi-Speed Control
Voltage Monitoring: +12V, +5V, +3.3V, CPU Vcore

OS

Microsoft Windows 8 / 8 64-bit / 7 / 7 64-bit compliant

Certifications

FCC, CE, WHQL

ErP/EuP Ready (ErP/EuP ready power supply is required)

English

* For detailed product information, please visit our website: http://www.asrock.com

Please realize that there is a certain risk involved with overclocking, including adjusting
the setting in the BIOS, applying Untied Overclocking Technology, or using third-party
overclocking tools. Overclocking may affect your systems stability, or even cause damage to
the components and devices of your system. It should be done at your own risk and expense.
We are not responsible for possible damage caused by overclocking.

Due to limitation, the actual memory size may be less than 4GB for the reservation for system usage under Windows 32-bit operating systems. Windows 64-bit operating systems
do not have such limitations. You can use ASRock XFast RAM to utilize the memory that
Windows cannot use.

English
6

Z87 Extreme3

1.3 Unique Features

ASRock A-Tuning
A-Tuning is ASRocks multi purpose software suite with a new interface, more new
features and improved utilities, including XFast RAM, Dehumidifier, Good Night
LED, FAN-Tastic Tuning, OC Tweaker and a whole lot more.

ASRock Instant Flash

ASRock Instant Flash is a BIOS flash utility embedded in Flash ROM. This convenient BIOS update tool allows you to update the system BIOS in a few clicks without
preparing an additional floppy diskette or other complicated flash utility. Just save
the new BIOS file to your USB storage and launch this tool by pressing <F6> or
<F2> during POST to enter the BIOS setup menu to access ASRock Instant Flash.
Please be noted that the USB flash drive or hard drive must use FAT32/16/12 file
system.

ASRock APP Charger

Simply by installing the ASRock APP Charger makes your iPhone/iPad/iPod Touch
charge up to 40% faster than before on your computer. ASRock APP Charger allows
you to quickly charge many Apple devices simultaneously and even supports
continuous charging when your PC enters into Standby mode (S1), Suspend to RAM
(S3), hibernation mode (S4) or power off (S5).

ASRock XFast USB

ASRock XFast USB can boost the performance of your USB storage devices. The
performance may depend on the properties of the device.

ASRock XFast LAN

English

ASRock XFast LAN provides faster internet access, which includes the benefits
listed below. LAN Application Prioritization: You can configure your applications
priority ideally and add new programs to the list. Lower Latency in Game: After
setting online games priority higher, it can lower the latency in games. Traffic
Shaping: You can watch Youtube HD videos and download simultaneously. RealTime Analysis of Your Data: With the status window, you can easily recognize
which data streams you are currently transferring.

ASRock XFast RAM

ASRock XFast RAM is included in A-Tuning. It fully utilizes the memory space
that cannot be used under Windows 32-bit operating systems. ASRock XFast RAM
shortens the loading time of previously visited websites, making web surfing faster
than ever. And it also boosts the speed of Adobe Photoshop 5 times faster. Another
advantage of ASRock XFast RAM is that it reduces the frequency of accessing your
SSDs or HDDs in order to extend their lifespan.

ASRock Crashless BIOS

ASRock Crashless BIOS allows users to update their BIOS without fear of failing. If
power loss occurs during the BIOS updating process, ASRock Crashless BIOS will
automatically finish the BIOS update procedure after regaining power. Please note
that BIOS files need to be placed in the root directory of your USB disk. Only USB 2.0
ports support this feature.

ASRock OMG (Online Management Guard)

Administrators are able to establish an internet curfew or restrict internet access
at specified times via OMG. You may schedule the starting and ending hours of
internet access granted to other users. In order to prevent users from bypassing
OMG, guest accounts without permission to modify the system time are required.

ASRock Internet Flash

ASRock Internet Flash downloads and updates the latest UEFI firmware version
from our servers for you without entering Windows OS. Please setup network
configuration before using Internet Flash.

ASRock UEFI System Browser

ASRock System Browser shows the overview of your current PC and the devices
connected.

ASRock Dehumidifier Function

Users may prevent motherboard damages due to dampness by enabling
Dehumidifier Function. When enabling Dehumidifier Function, the computer
will power on automatically to dehumidify the system after entering S4/S5 state.

ASRock Easy RAID Installer

English

ASRock Easy RAID Installer can help you to copy the RAID driver from the
support CD to your USB storage device. After copying the RAID driver to your
USB storage device, please change SATA Mode to RAID, then you can start
installing the OS in RAID mode.

Z87 Extreme3

ASRock Easy Driver Installer

For users that dont have an optical disk drive to install the drivers from our support
CD, Easy Driver Installer is a handy tool in the UEFI that installs the LAN driver
to your system via an USB storage device, then downloads and installs the other
required drivers automatically.

ASRock Interactive UEFI

ASRock Interactive UEFI is a blend of system configuration tools, cool sound effects
and stunning visuals. The unprecedented UEFI provides a more attractive interface
and more amusment.

ASRock Fast Boot

With ASRocks exclusive Fast Boot technology, it takes less than 1.5 seconds to
logon to Windows 8 from a cold boot. No more waiting! The speedy boot will
completely change your user experience and behavior.

ASRock Restart to UEFI

Windows 8 brings the ultimate boot up experience. The lightning boot up speed
makes it hard to access the UEFI setup. ASRock Restart to UEFI allows users to
enter the UEFI automatically when turning on the PC. By enabling this function,
the PC will enter the UEFI directly after you restart.

ASRock Good Night LED

ASRock Good Night LED technology offers you a better sleeping environment by
extinguishing the unessential LEDs. By enabling Good Night LED in the BIOS, the
Power/HDD LEDs will be switched off when the system is powered on. Good Night
LED will automatically switch off the Power and Keyboard LEDs when the system
enters into Standby/Hibernation mode as well.

ASRock USB Key

In a world where time is money, why waste precious time everyday typing
usernames to log in to Windows? Why should we even bother memorizing those
foot long passwords? Just plug in the USB Key and let your computer log in to
windows automatically!

ASRock Home Cloud

English

This motherboard supports remote wake with the onboard Intel LAN, so you
can connect with your PC from anywhere in the world. You will be able to power
your PC on or turn it off, monitor and take control of it remotely with another
smartphone, tablet or computer.

ASRock FAN-Tastic Tuning

ASRock FAN-Tastic Tuning is included in A-Tuning. Configure up to five different
fan speeds using the graph. The fans will automatically shift to the next speed level
when the assigned temperature is met.

English
10

Z87 Extreme3

1.4 Motherboard Layout

2

USB 2.0
T: USB0
B: USB1

PS2
Keyboard
/Mouse

CPU_FAN2

ATX12V1

CPU_FAN1

ATXPWR1

DDR3_B2 (64 bit, 240-pin module)

Top:
RJ-45

Center:
FRONT

Top:
LINE IN

Bottom:
MIC IN

Top:
Central/Bass

Bottom:
Optical
SPDIF

Center:
REAR SPK

PWR_FAN1 CHA_FAN3 CHA_FAN2

LAN

USB3_4_5

USB 3.0
T: USB2
B: USB3

DDR3_B1 (64 bit, 240-pin module)

USB 3.0
T: USB0
B: USB1

DDR3_A2 (64 bit, 240-pin module)

HDMI1

DDR3_A1 (64 bit, 240-pin module)

VGA

DVI1

24

8
1

23

PCIE1

Z87 Extreme3

Intel
Z87

PCI1
Super
I/O

X Fast USB X Fast LAN X Fast RAM

PCI Express 3.0

PCI2

AUDIO
CODEC

10

SATA3_4_5

PCIE3

SATA3_0_1

CMOS
Battery

SATA3_2_3

PCIE2

RoHS

11

64Mb
BIOS

PCI3
Front USB 3.0
COM1

HD_AUDIO1

USB2_3

USB4_5

IR1

CHA_FAN1

PLED PWRBTN

CLRCMOS1

SPEAKER1

SPDIF_OUT1

PLED1

HDLED RESET

PANEL1

21

20

19

18

17

16

15

14

13

12

English

22

11

No. Description

English
12

ATX 12V Power Connector (ATX12V1)

Chassis Fan Connector (CHA_FAN2)

CPU Fan Connector (CPU_FAN1)

CPU Fan Connector (CPU_FAN2)

2 x 240-pin DDR3 DIMM Slots (DDR3_A1, DDR3_B1)

2 x 240-pin DDR3 DIMM Slots (DDR3_A2, DDR3_B2)

ATX Power Connector (ATXPWR1)

USB 3.0 Header (USB3_4_5)

SATA3 Connectors (SATA3_0_1)

10

SATA3 Connectors (SATA3_2_3)

11

SATA3 Connectors (SATA3_4_5)

12

System Panel Header (PANEL1)

13

Power LED Header (PLED1)

14

Clear CMOS Jumper (CLRCMOS1)

15

Chassis Fan Connector (CHA_FAN1)

16

USB 2.0 Header (USB2_3)

17

USB 2.0 Header (USB4_5)

18

Chassis Speaker Header (SPEAKER1)

19

SPDIF Out Connector (SPDIF_OUT1)

20

Infrared Module Header (IR1)

21

COM Port Header (COM1)

22

Front Panel Audio Header (HD_AUDIO1)

23

Power Fan Connector (PWR_FAN1)

24

Chassis Fan Connector (CHA_FAN3)

Z87 Extreme3

14

13

12

11

4
5

6
7

10

No. Description

No. Description

USB 2.0 Ports (USB01)

Microphone (Pink)

VGA Port

Optical SPDIF Out Port

LAN RJ-45 Port*

10

USB 3.0 Ports (USB3_23)

Central / Bass (Orange)

11

USB 3.0 Ports (USB3_01)

Rear Speaker (Black)

12

HDMI Port

Line In (Light Blue)

13

DVI-D Port

Front Speaker (Lime)**

14

PS/2 Mouse/Keyboard Port

English

1.5 I/O Panel

13

* There are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.
ACT/LINK LED
SPEED LED

LAN Port

Activity / Link LED

Speed LED

Status

Description

Status

Description

Off
Blinking
On

No Link
Data Activity
Link

Off
Orange
Green

10Mbps connection
100Mbps connection
1Gbps connection

** If you use a 2-channel speaker, please connect the speakers plug into Front Speaker Jack. See the table below
for connection details in accordance with the type of speaker you use.

Audio Output
Channels

Front Speaker
(No. 7)

Rear Speaker
(No. 5)

Central / Bass
(No. 4)

Line In
(No. 6)

2
4
6
8

V
V
V
V

-V
V
V

--V
V

---V

To enable Multi-Streaming, you need to connect a front panel audio cable to the front
panel audio header. After restarting your computer, you will find the Mixer tool on your
system. Please select Mixer ToolBox
, click Enable playback multi-streaming, and
click ok. Choose 2CH, 4CH, 6CH, or 8CH and then you are allowed to select
Realtek HDA Primary output to use the Rear Speaker, Central/Bass, and Front Speaker,
or select Realtek HDA Audio 2nd output to use the front panel audio.

*** The eSATA connector supports SATA with cables within 1 meters.

English
14

Chapter 2 Installation
This is an ATX form factor motherboard. Before you install the motherboard, study
the configuration of your chassis to ensure that the motherboard fits into it.

Pre-installation Precautions
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
Make sure to unplug the power cord before installing or removing the motherboard.
Failure to do so may cause physical injuries to you and damages to motherboard
components.
In order to avoid damage from static electricity to the motherboards components,
NEVER place your motherboard directly on a carpet. Also remember to use a grounded
wrist strap or touch a safety grounded object before you handle the components.
Hold components by the edges and do not touch the ICs.
Whenever you uninstall any components, place them on a grounded anti-static pad or
in the bag that comes with the components.
When placing screws to secure the motherboard to the chassis, please do not overtighten the screws! Doing so may damage the motherboard.

15

2.1 Installing the CPU

1. Before you insert the 1150-Pin CPU into the socket, please check if the PnP cap is on the
socket, if the CPU surface is unclean, or if there are any bent pins in the socket. Do not
force to insert the CPU into the socket if above situation is found. Otherwise, the CPU
will be seriously damaged.
2. Unplug all power cables before installing the CPU.

A
B

English
16

Z87 Extreme3

English

17

Please save and replace the cover if the processor is removed. The cover must be placed if
you wish to return the motherboard for after service.

English
18

Z87 Extreme3

2.2 Installing the CPU Fan and Heatsink

U_
FA
N

English

CP

19

2.3 Installing Memory Modules (DIMM)

This motherboard provides four 240-pin DDR3 (Double Data Rate 3) DIMM slots,
and supports Dual Channel Memory Technology.
1. For dual channel configuration, you always need to install identical (the same brand,
speed, size and chip-type) DDR3 DIMM pairs.
2. It is unable to activate Dual Channel Memory Technology with only one or three memory
module installed.
3. It is not allowed to install a DDR or DDR2 memory module into a DDR3 slot; otherwise,
this motherboard and DIMM may be damaged.

Dual Channel Memory Configuration

Priority
1
2
3

DDR3_A1

DDR3_A2

DDR3_B1

Populated
Populated
Populated

Populated

DDR3_B2
Populated

Populated
Populated

Populated

The DIMM only fits in one correct orientation. It will cause permanent damage to the
motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.

English
20

Z87 Extreme3

English

21

2.4 Expansion Slots (PCI and PCI Express Slots)

There are 3 PCI slots and 3 PCI Express slots on the motherboard.

Before installing an expansion card, please make sure that the power supply is switched off
or the power cord is unplugged. Please read the documentation of the expansion card and
make necessary hardware settings for the card before you start the installation.

PCI slot:
The PCI1, PCI2, and PCI3 slots are used to install expansion cards that have 32-bit
PCI interface.
PCIe slots:
PCIE1 (PCIe 2.0 x1 slot) is used for PCI Express x1 lane width cards.
PCIE2 (PCIe 3.0 x16 slot) is used for PCI Express x16 lane width graphics cards.
PCIE3 (PCIe 3.0 x16 slot) is used for PCI Express x8 lane width graphics cards.

PCIe Slot Configurations

PCIE2

PCIE3

Single Graphics Card

x16

N/A

Two Graphics Cards in

CrossFireXTM or SLITM Mode

x8

x8

For a better thermal environment, please connect a chassis fan to the motherboards chassis fan connector (CHA_FAN1, CHA_FAN2 or CHA_FAN3) when using multiple graphics
cards.

English
22

Z87 Extreme3

2.5 Jumpers Setup

The illustration shows how jumpers are setup. When the jumper cap is placed on
the pins, the jumper is Short. If no jumper cap is placed on the pins, the jumper
is Open. The illustration shows a 3-pin jumper whose pin1 and pin2 are Short
when a jumper cap is placed on these 2 pins.

Clear CMOS Jumper

(CLRCMOS1)
(see p.11, No. 14)

Default

Clear CMOS

CLRCMOS1 allows you to clear the data in CMOS. To clear and reset the system
parameters to default setup, please turn off the computer and unplug the power
cord from the power supply. After waiting for 15 seconds, use a jumper cap to
short pin2 and pin3 on CLRCMOS1 for 5 seconds. However, please do not clear
the CMOS right after you update the BIOS. If you need to clear the CMOS when
you just finish updating the BIOS, you must boot up the system first, and then shut
it down before you do the clear-CMOS action. Please be noted that the password,
date, time, and user default profile will be cleared only if the CMOS battery is
removed.

English

The Clear CMOS Switch has the same function as the Clear CMOS jumper.

23

2.6 Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these
headers and connectors. Placing jumper caps over the headers and connectors will cause
permanent damage to the motherboard.

System Panel Header

(9-pin PANEL1)
(see p.11, No. 12)

PLED+
PLEDPWRBTN#
GND

1
GND
RESET#
GND
HDLEDHDLED+

Connect the power

switch, reset switch and
system status indicator on
the chassis to this header
according to the pin
assignments below. Note
the positive and negative
pins before connecting
the cables.

PWRBTN (Power Switch):

Connect to the power switch on the chassis front panel. You may configure the way to turn
off your system using the power switch.
RESET (Reset Switch):
Connect to the reset switch on the chassis front panel. Press the reset switch to restart the
computer if the computer freezes and fails to perform a normal restart.
PLED (System Power LED):
Connect to the power status indicator on the chassis front panel. The LED is on when the
system is operating. The LED keeps blinking when the system is in S1/S3 sleep state. The
LED is off when the system is in S4 sleep state or powered off (S5).
HDLED (Hard Drive Activity LED):
Connect to the hard drive activity LED on the chassis front panel. The LED is on when the
hard drive is reading or writing data.
The front panel design may differ by chassis. A front panel module mainly consists of power
switch, reset switch, power LED, hard drive activity LED, speaker and etc. When connecting your chassis front panel module to this header, make sure the wire assignments and the
pin assignments are matched correctly.

English
24

Z87 Extreme3

1
PLEDPLED+
PLED+

USB 2.0 Headers

(9-pin USB2_3)
(see p.11, No. 16)
(9-pin USB4_5)
(see p.11, No. 17)

USB 3.0 Headers

(19-pin USB3_4_5)
(see p.11, No. 8)

These six SATA3

connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.

SATA3_4_5 SATA3_2_3

SATA3_0_1

Serial ATA3 Connectors

(SATA3_0_1:
see p.11, No. 9)
(SATA3_2_3:
see p.11, No. 10)
(SATA3_4_5:
see p.11, No. 11)

USB_PWR
PP+

GND
DUMMY

GND
P+
PUSB_PWR

Vbus
Vbus

IntA_PB_SSRX-

IntA_PA_SSRX-

IntA_PB_SSRX+
GND

IntA_PA_SSRX+
GND

IntA_PB_SSTX-

IntA_PA_SSTX-

IntA_PB_SSTX+

IntA_PA_SSTX+

GND
IntA_PB_D-

GND
IntA_PA_D-

IntA_PB_D+

IntA_PA_D+

Dummy
1

Front Panel Audio Header

(9-pin HD_AUDIO1)
(see p.11, No. 22)

Please connect the chassis

power LED to this header
to indicate the systems
power status.

GND
PRESENCE#
MIC_RET
OUT_RET

Besides two USB 2.0 ports

on the I/O panel, there
are two headers on this
motherboard. Each USB
2.0 header can support
two ports.

Besides four USB 3.0 ports

on the I/O panel, there
are one header on this
motherboard. Each USB
3.0 header can support
two ports.
This header is for
connecting audio devices
to the front audio panel.

English

Power LED Header

(3-pin PLED1)
(see p.11, No. 13)

OUT2_L
J_SENSE
OUT2_R
MIC2_R
MIC2_L

25

1. High Definition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly. Please follow the instructions in our manual and chassis
manual to install your system.
2. If you use an AC97 audio panel, please install it to the front panel audio header by the
steps below:
A. Connect Mic_IN (MIC) to MIC2_L.
B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.
C. Connect Ground (GND) to Ground (GND).
D. MIC_RET and OUT_RET are for the HD audio panel only. You dont need to connect
them for the AC97 audio panel.
E. To activate the front mic, go to the FrontMic Tab in the Realtek Control panel and
adjust Recording Volume.

Chassis Speaker Header

(4-pin SPEAKER1)
(see p.11, No. 12)
SPDIF Out Connector
(2-pin SPDIF_OUT1)
(see p.11, No. 19)

Chassis and Power Fan

Connectors
(4-pin CHA_FAN1)
(see p.11, No. 15)
(3-pin CHA_FAN2)
(see p.11, No. 2)
(3-pin CHA_FAN3)
(see p.11, No. 24)

English

(3-pin PWR_FAN1)
(see p.11, No. 23)

26

DUMMY SPEAKER
1
+5V

DUMMY

1
GND
SPDIFOUT

GND
+12V
FAN_SPEED
FAN_SPEED_CONTROL

GND
+ 12V
CHA_ FAN_SPEED

Please connect the chassis

speaker to this header.

Please connect the

SPDIF_OUT connector of
a HDMI VGA card to this
header with a cable.
Please connect fan cables
to the fan connectors and
match the black wire to
the ground pin.

Z87 Extreme3

CPU Fan Connectors

(4-pin CPU_FAN1)
(see p.11, No. 3)

1
2
3
4

GN D
+ 12V
CPU_ FAN_SPEED
FAN_SPEED_CONTROL

(3-pin CPU_FAN2)
(see p.11, No. 4)

GND
+ 12V
CPU_ FAN_SPEED

ATX Power Connector

(24-pin ATXPWR1)
(see p.11, No. 7)

ATX 12V Power

Connector
(8-pin ATX12V1)
(see p.11, No. 1)

12

24

13

This motherboard provides a 24-pin ATX power

connector. To use a 20-pin
ATX power supply, please
plug it along Pin 1 and Pin
13.

Infrared Module Header

(5-pin IR1)
(see p.11, No. 20)

This motherboard provides a 4-Pin CPU fan

(Quiet Fan) connector.
If you plan to connect a
3-Pin CPU fan, please
connect it to Pin 1-3.

IRTX
+5VSB
DUMMY

This motherboard provides an 8-pin ATX 12V

power connector. To use a
4-pin ATX power supply,
please plug it along Pin 1
and Pin 5.
This header supports an optional
wireless transmitting and
receiving infrared module.

GND
IRRX

Serial Port Header

(9-pin COM1)
(see p.11, No. 21)

RRXD1
DDTR#1
DDSR#1
CCTS#1

This COM1 header

supports a serial port
module.

English

RRI#1
RRTS#1
GND
TTXD1
DDCD#1

27

2.7 SLITM and Quad SLITM Operation Guide

This motherboard supports NVIDIA SLITM and Quad SLITM (Scalable Link
Interface) technology that allows you to install up to two identical PCI Express x16
graphics cards. Currently, NVIDIA SLITM and Quad SLITM technology supports
Windows 7 / 7 64-bit / 8 / 8 64-bit OS.

Requirements
1. You should only use identical SLITM-ready graphics cards that are NVIDIA certified.
2. Make sure that your graphics card driver supports NVIDIA SLITM technology. Download
the drivers from the NVIDIA website: www.nvidia.com
3. Make sure that your power supply unit (PSU) can provide at least the minimum power
your system requires. It is recommended to use a NVIDIA certified PSU. Please refer to
the NVIDIA website for details.

2.7.1 Installing Two SLITM-Ready Graphics Cards

Step 1
Insert one graphics card into PCIE2 slot
and the other graphics card to PCIE3 slot.
Make sure that the cards are properly
seated on the slots.

Step 2
If required, connect the auxiliary power
source to the PCI Express graphics cards.

English
28

Z87 Extreme3

Step 3
Align and insert the ASRock SLI_
Bridge_2S Card to the goldfingers on each
graphics card. Make sure the ASRock SLI_
Bridge_2S Card is firmly in place.

SLI_Bridge_2S Card

ASRock SLI_Bridge_2S Card

Step 4

English

Connect a VGA cable or a DVI cable to the

monitor connector or the DVI connector of
the graphics card that is inserted to PCIE2
slot.

29

2.7.2 Driver Installation and Setup

Install the graphics card drivers to your system. After that, you can enable the
Multi-Graphics Processing Unit (GPU) in the NVIDIA nView system tray utility.
Please follow the below procedures to enable the multi-GPU.

For SLITM and Quad SLITM mode

Step 1
Double-click the NVIDIA Control Panel
icon in the Windows system tray.
Step 2
In the left pane, click Set SLI and PhysX
configuration. Then select Maximize 3D
performance and click Apply.
Step 3
Reboot your system.
Step 4
You can freely enjoy the benefits of SLITM
or Quad SLITM.

English
30

Z87 Extreme3

2.8 CrossFireXTM and Quad CrossFireXTM Operation Guide

This motherboard supports CrossFireXTM and Quad CrossFireXTM that allows you to
install up to two identical PCI Express x16 graphics cards. Currently CrossFireXTM
and Quad CrossFireXTM are supported with Windows 7 / 7 64-bit / 8 / 8 64-bit OS.
1. You should only use identical CrossFireXTM-ready graphics cards that are AMD certified.
2. Make sure that your graphics card driver supports AMD CrossFireXTM technology.
Download the drivers from the AMDs website: www.amd.com
3. Make sure that your power supply unit (PSU) can provide at least the minimum power
your system requires. It is recommended to use a AMD certified PSU. Please refer to the
AMDs website for details.
4. If you pair a 12-pipe CrossFireXTM Edition card with a 16-pipe card, both cards will operate as 12-pipe cards while in CrossFireXTM mode.
5. Different CrossFireXTM cards may require different methods to enable CrossFireXTM.
Please refer to AMD graphics card manuals for detailed installation guide.

2.8.1 Installing Two CrossFireXTM-Ready Graphics Cards

Step 1
Insert one graphics card into PCIE2 slot
and the other graphics card to PCIE3 slot.
Make sure that the cards are properly
seated on the slots.

Step 2

English

CrossFire Bridge

Connect two graphics cards by installing

a CrossFire Bridge on the CrossFire Bridge
Interconnects on the top of the graphics
cards. (The CrossFire Bridge is provided
with the graphics card you purchase, not
bundled with this motherboard. Please
refer to your graphics card vendor for
details.)

31

Step 3
Connect a VGA cable or a DVI cable to the
monitor connector or the DVI connector of the graphics card that is inserted to
PCIE2 slot.

English
32

Z87 Extreme3

2.8.3 Driver Installation and Setup

Step 1
Power on your computer and boot into OS.
Step 2
Remove the AMD drivers if you have any VGA drivers installed in your system.

The Catalyst Uninstaller is an optional download. We recommend using this utility to uninstall any previously installed Catalyst drivers prior to installation. Please check AMDs
website for AMD driver updates.

Step 3
Install the required drivers and CATALYST Control Center then restart your
computer. Please check AMDs website for details.
Step 4

Step 5
In the left pane, click Performance and
then AMD CrossFireXTM . Then select
Enable AMD CrossFireX and click Apply.
Select the GPU number according to your
graphics card and click Apply.

English

AMD Catalyst Control Center

Double-click the AMD Catalyst Control

Center icon in the Windows system tray.

33

Chapter 3 Software and Utilities Operation

3.1 Installing Drivers
The Support CD that comes with the motherboard contains necessary drivers and
useful utilities that enhance the motherboards features.

Running The Support CD

To begin using the support CD, insert the CD into your CD-ROM drive. The CD
automatically displays the Main Menu if AUTORUN is enabled in your computer.
If the Main Menu does not appear automatically, locate and double click on the file
ASRSETUP.EXE in the Support CD to display the menu.

Drivers Menu
The drivers compatible to your system will be auto-detected and listed on the
support CD driver page. Please click Install All or follow the order from top to
bottom to install those required drivers. Therefore, the drivers you install can work
properly.

Utilities Menu
The Utilities Menu shows the application software that the motherboard supports.
Click on a specific item then follow the installation wizard to install it.

To improve Windows 7 compatibility, please download and install the following hot fix
provided by Microsoft.
KB2720599: http://support.microsoft.com/kb/2720599/en-us

English
34

Z87 Extreme3

3.2 A-Tuning
A-Tuning is ASRocks multi purpose software suite with a new interface, more new
features and improved utilities, including XFast RAM, Dehumidifier, Good Night
LED, FAN-Tastic Tuning, OC Tweaker and a whole lot more.

3.2.1 Installing A-Tuning

When you install the all-in-one driver to your system from ASRocks support CD,
A-Tuning will be auto-installed as well. After the installation, you will find the icon
A-Tuning on your desktop. Double-click the A-Tuning
icon, A-Tuning
main menu will pop up.

3.2.2 Using A-Tuning

There are five sections in AXTU main menu: Operation Mode, Tools, OC Tweaker,
System Info and Tech Service.

Operation Mode

English

Choose an operation mode for your computer.

35

Tools
Various tools and utilities.

XFast RAM
Boost the systems performance and extend the HDDs or SDDs lifespan! Create a
hidden partition, then assign which files should be stored in the RAM drive.

Fast Boot
Fast Boot minimizes your computer's boot time. Please note that Ultra Fast mode
is only supported by Windows 8 and the VBIOS must support UEFI GOP if you are
using an external graphics card.

OMG
Schedule the starting and ending hours of Internet access granted to other users.
Place X marks on the time table to disable the Internet.

Good Night LED

Switch off the Power/HDD/LAN LEDs when the system is on, and automatically
switch off the Power and Keyboard LEDs when the system enters into Standby/
Hibernation mode.

English

FAN-Tastic Tuning
Configure up to five different fan speeds using the graph. The fans will automatically
shift to the next speed level when the assigned temperature is met.

36

Z87 Extreme3

Dehumidifier
Prevent motherboard damages due to dampness. Enable this function and
configure the period of time until the computer powers on, and the duration of the
dehumidifying process.

HDMI-IN
Connect two different devices to one monitor and toggle between the primary and
secondary screen without replugging the connectors every time. Please set a hotkey
for switching between the two devices.

OC Tweaker
Configurations for overclocking the system.

System Info

English

View information about the system.

37

Tech Service
Contact Tech Service.

English
38

Z87 Extreme3

3.3 Intel Rapid Start Technology

Intel Rapid Start Technology enables your system to wake up faster from deep
sleep, saving time and power consumption. Feel secure to know that your system
will resume to working condition even if an unexpected power loss happens while
the PC is in sleep mode.

3.3.1 System Requirements

Confirm whether your motherboard supports this feature.

Operating system: Microsoft Windows 8/7 (32- or 64-bit edition)

Set the SATA mode to AHCI. If Windows 8/7 is already installed under IDE
mode, directly changing the SATA mode to AHCI may cause Windows 8/7
to crash while booting. If your system is not in AHCI mode, please follow the
instructions below.

1.

Press Win + R simultaneously in Windows 8/7, type "Regedit" into the word
box then click OK.

2.

Enter into HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\

msahci in Windows Registry Editor. Double click on the value Start and
change the value from 3 into 0. Click on OK.

English

There are certain risks. Please backup any important data before operating to avoid loss.

39

3.

Exit the Registry Editor window and restart the computer.

4.

Press F2 to enter BIOS, then go to Advanced > Storage Configuration and

change SATA Mode to AHCI. Press F10 to save changes and exit.

5.

Enter Windows 8/7. Windows will discover the new device and install AHCI
drivers automatically.

3.3.2 Setup Guide

Configuring Rapid Start
Step 1
Run ASRock Rapid Start utility from Start -> All Programs -> ASRock Utility.
Step 2
If you have more than one hard drives in your system, you must select one, then
choose the Partition Size desired for your hidden partition and click on Create. The
system will automatically create a hidden partition according to your settings. If
there are SSDs installed into your system, it is recommended to create the partition
on the SSD.

English
40

Z87 Extreme3

Step 3
When prompted to restart after the setup, click Yes to reboot.

Step 4
in the Windows

English

Double-click the Intel Rapid Start Technology Manager icon

system tray.

41

Step 5
Make sure Rapid Start is on. Drag the slider to configure the time. For example, if
the timer value is set to ten minutes, the system will enable Rapid Start mode after
entering sleep state for ten minutes. If the timer is set to 0 minutes, Windows will
immediately enable Rapid Start mode as it enters sleep state.

Using Rapid Start

English
42

1.

You may shut down the computer without terminating the applications or files
you are executing currently. Click on Windows Start > the arrow next to Shut
down, and click on Sleep.

2.

Windows system will enter sleep state.

3.

According to your settings in Rapid Start Technology Manager, the system

will automatically wake up and enable Rapid Start mode after entering sleep

Z87 Extreme3

state for a period of time. The power of the computer in Rapid Start mode can
be cut off, it will not cause data loss of the programs or files you were executing
before entering sleep state.
When you wish to continue to use the computer just hit the power button, the
system will rapidly return to Windows, the programs and files which you were
using before entering sleep state will be accessible immediately.

English

4.

43

3.4 Intel Smart Connect Technology

Intel Smart Connect Technology is a feature that periodically wakes your computer
from Windows sleep state to refresh email or social networking applications. It
saves your waiting time and keeps the content always up-to-date.

3.4.1 System Requirements

Confirm whether your motherboard supports this feature.

Operating system: Microsoft Windows 8/7 (32- or 64-bit edition)

Set the SATA mode to AHCI. If Windows 8/7 is already installed under IDE
mode, directly changing the SATA mode to AHCI may cause Windows 8/7
to crash while booting. If your system is not in AHCI mode, please follow the
instructions below.

There are certain risks. Please backup any important data before operating to avoid loss.

English
44

1.

Press Win + R simultaneously in Windows 8/7, type "Regedit" into the word
box then click OK.

2.

Enter into HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\

msahci in Windows Registry Editor. Double click on the value Start and
change the value from 3 into 0. Click on OK.

Z87 Extreme3

3.4.2 Setup Guide

Installing ASRock Smart Connect Utility
Step 1
Install ASRock Smart Connect Utility, which is located in the folder at the following
path of the Support CD: \ ASRock Utility > Smart Connect.

Step 2

English

Once installed, run ASRock Smart Connect from your desktop or go to Windows
Start -> All Programs -> ASRock Utility.

45

Step 3
Click the Add button. Take Foxmail as an example, add Foxmail to the Application
list.

Step 4
Select Foxmail from the Application List, then click the arrow pointing right to add
this application to the Smart Connect List.

English

Step 5
Click Apply to enable Smart Connect.

46

Z87 Extreme3

Step 6
Double-click the Intel Smart Connect Technology Manager icon
Windows system tray.

in the

Step 7
Drag the slider to configure how often the system will connect to the network to
download updates. Shorter durations will provide more frequent updates, but may
cause more power consumption.

Using Smart Connect

Keep the applications which you wish to connect to the internet and receive
updates while the system is in sleep state running. Foxmail for instance, keep
Foxmail running.

2.

Click on Windows Start -> the arrow next to Shut down, and click on Sleep.

3.

Windows system will enter sleep state.

English

1.

47

English
48

4.

The system will wake up from sleep state periodically, and then start to update
Foxmail. The screen will not display anything so the computer can maintain
minimum power usage. Afterwards, the system will automatically return to
sleep state again.

5.

Upon waking up the system, you will find the new mail that were sent to you
during sleep state are already updated and ready to be read in Foxmail.

Z87 Extreme3

3.5 Intel Remote Wake Technology

Intel Remote Wake Technology allows you to use programs or services over the
Internet to wake up your home computer from energy efficient sleep mode.
Before configuring this feature, verify the following.

Remote Wake has been enabled in "Intel Smart Connect Technology

Manager".

Make sure that the "PCI Device Power On" is enabled in UEFI SETUP
UTILITY > Advanced > ACPI Configuration.

3.5.1 Configuring and Using MeshCentral

MeshCentral allows you to remotely wake up a PC from any network using a single
web site. Just download and install the mesh agent on your computers and your
computers will show up in the "My Devices" section of MeshCentral.com.

Creating a Mesh
Step 1

English

Login to Meshcentral.com.
If you have not created a MeshCentral acount, go to MeshCentral.com and create a
new account.

Step 2
Click the "My Account" tab. Then click on "New" to create a new mesh.

49

Step 3
A new mesh window will pop up. Enter a mesh name and password.
Step 4
Select all the checkboxes and click Create Mesh.

Downloading and Installing Mesh Agent

Step 1
Click Install on the My Account page.

Step 2

English

Select the mesh and download both files. Make sure both files are in the same
directory.
Step 3
Right-click on the MeshAgent.exe and select Run as administor.

50

Z87 Extreme3

Step 4
Click Install / Update.

Step 5

English

Wait a minute for the New Machine to appear in "My Device".

51

Step 6
Check whether "Intel Remote Wake" appeared or not.

Step 7
Click on Power Actions.
Step 8
Click on Wake or Sleep.

English
52

Z87 Extreme3

Waking up a PC using mobile device.

Before waking up your home computer using a mobile device, please log out of MeshCentral
on other previously used computers or devices.

Step 1
Login to meshcentral.com/m.
Step 2
Select a Machine.
Step 3

English

Click on Wake or Sleep.

Tutorial Video

53

3.5.2 Configuring and Using Splashtop

Splashtop is a remote desktop access software that lets you remotely access your
home computer from your mobile device.
Before configuring this feature, verify that the "Remote Wake" has been enabled in
"Intel Smart Connect Technology Manager".

Setup Guide
Step 1
Download and install Streamer on your home computer, which is located in the folder at the following path of the Support CD: \ ASRock Utility > Splashtop Streamer.
Then enter your Splashtop Account. If you have not created a Splashtop acount,
create one.
Step 2
Download and install Splashtop 2 on your mobile device and log into the app.

Using Remote Wakeup

Step 1
In "Splashtop 2, tap the edit button next to an offline machine from the list.
Step 2
Tap "Wake up this computer".

English
54

Z87 Extreme3

Using Remote Control

Step 1
In "Splashtop 2, tap an online machine from the list to connect to your home
computer.

Step 2
Start remotely accessing your home computer.

English

The functionality and price of the Splashtop APP and subscription fee is subject to
change. Please check www.splashtop.com for for details.

55

Accessing Data

Playing Video

English
56

Z87 Extreme3

3.6 Intel Extreme Tuning Utility (IXTU)

Intel Extreme Tuning Utility is an overclocking utility that allows you to tune and tweak
your system for performance optimization while still maintaining system stability.
Double-click

on your desktop to access Intel Extreme Tuning Utility.

Overclocking may affect your systems stability, or even cause damage to the components
and devices of your system. It should be done at your own risk and expense. We are not
responsible for the possible damage caused by overclocking.

3.7.1 UI Overview
Navigation Panel

Adjustment Panel

Information Panel

System Monitoring Screen

Navigation Panel: Provides access to the functions of this tuning utility.
Adjustment Panel: Provides tuning options.

English

Information Panel: Displays readouts, such as clock speeds and turbo boost power
capacities.
System Monitoring Screen: Provides a graph for you to track CPU usage, memory usage,
and CPU temperature.

57

System Information
Displays the major information of your system.

Manual Tuning
Manual Tuning shows the major readings of your system and allows you to tune the
parameters, including voltage for the CPU core, GPU, and TurboBoost functions.
Click Apply to apply the settings. Click Save to save your current settings as a profile.

Stress Test
Stress Test allows maximum load testing on both CPU and memory. Specify the
duration and click Start Testing.

Benchmarking
With Benchmarking, you can share and compare the scores online with other users
in the HWBot community. Click Run to benchmark your current settings. Click
Compare Online to upload your score.

Profiles
Profiles shows a list of profiles for your overclocking settings and Benchmark
results, which can be exported to share with other overclockers.

English
58

Z87 Extreme3

3.7 Start8
For those Windows 8 users who miss the Start Menu, Start8 is an ideal solution that
brings back the familiar Start Menu along with added customizations for greater
efficiency.

3.7.1 Installing Start8

Install Start8, which is located in the folder at the following path of the Support CD:
\ ASRock Utility > Start8.

3.7.2 Configuring Start8

Style

English

Select between the Windows 7 style and Windows 8 style Start Menu. Then select
the theme of the Start Menu and customize the style of the Start icon.

59

Configure

Configure provides configuration options, including icon sizes, which shortcuts you
want Start Menu to display, quick access to recently used apps, the functionality of
the power button, and more.

Control

English
60

Z87 Extreme3

Control lets you configure what a click on the start button or a press on the
Windows key does.

Desktop

Desktop allows you to disable the hot corners when you are working on the desktop.
It also lets you choose whether or not the system boots directly into desktop mode
and bypass the Metro user interface.

About

English

Displays information about Start8.

61

Chapter 4 UEFI SETUP UTILITY

4.1 Introduction
ASRock Interactive UEFI is a blend of system configuration tools, cool sound effects
and stunning visuals. Not only will it make BIOS setup less difficult but also a lot
more amusing. This section explains how to use the UEFI Setup Utility to
configure your system. You may run the UEFI Setup Utility by pressing <F2>
or <Del> right after you power on the computer, otherwise, the Power-On-Self-Test
(POST) will continue with its test routines. If you wish to enter the UEFI Setup
Utility after POST, restart the system by pressing <Ctl> + <Alt> + <Delete>, or
by pressing the reset button on the system chassis. You may also restart by turning
the system off and then back on.
Because the UEFI software is constantly being updated, the following UEFI setup screens
and descriptions are for reference purpose only, and they may not exactly match what you
see on your screen.

4.1.1 UEFI Menu Bar

The top of the screen has a menu bar with the following selections:

English
62

Main

For setting system time/date information

OC Tweaker

For overclocking configurations

Advanced

For advanced system configurations

Tool

Useful tools

H/W Monitor

Displays current hardware status

Boot

For configuring boot settings and boot priority

Security

For security settings

Exit

Exit the current screen or the UEFI Setup Utility

Z87 Extreme3

4.1.2 Navigation Keys

Use < > key or < > key to choose among the selections on the menu bar, and
use < > key or < > key to move the cursor up or down to select items, then
press <Enter> to get into the sub screen. You can also use the mouse to click your
required item.
Please check the following table for the descriptions of each navigation key.

+ / -

Description
To change option for the selected items

<Tab>

Switch to next function

<PGUP>

Go to the previous page

<PGDN>

Go to the next page

<HOME>

Go to the top of the screen

<END>

Go to the bottom of the screen

<F1>

To display the General Help Screen

<F4>

Toggle sound on/off

<F7>

Discard changes and exit the SETUP UTILITY

<F9>

Load optimal default values for all the settings

<F10>

Save changes and exit the SETUP UTILITY

<F12>

Print screen

<ESC>

Jump to the Exit Screen or exit the current screen

English

Navigation Key(s)

63

4.2 Main Screen

When you enter the UEFI Setup Utility, the Main screen will appear and
display the system overview.

Active Page on Entry

Select the default page when entering the UEFI setup utility.

UEFI Guide
UEFI Guide is a quick tutorial for ASRock's UEFI setup Utility. You may abort the
tutorial by pressing "esc".

English
64

Z87 Extreme3

4.3 OC Tweaker Screen

In the OC Tweaker screen, you can set up overclocking features.

Because the UEFI software is constantly being updated, the following UEFI setup screens
and descriptions are for reference purpose only, and they may not exactly match what you
see on your screen.

Advanced Turbo
You can use this option to increase your system performance. This option appears
only when your CPU supports this function. This option appears only when you
adopt K-Series CPU.

Load Optimized CPU OC Setting

English

You can use this option to load optimized CPU overclocking setting. Please note
that overclocing may cause damage to your CPU and motherboard. It should be
done at your own risk and expense. This option appears only when you adopt
K-Series CPU.

Load Optimized GPU OC Setting

You can use this option to load optimized GPU overclocking setting. Please note that
overclocing may cause damage to your GPU and motherboard. It should be done at your
own risk and expense. This option appears only when you adopt K-Series CPU.

65

CPU Configuration
CPU Ratio
The CPU speed is determined by the CPU Ratio multiplied with the BCLK.
Increasing the CPU Ratio will increase the internal CPU clock speed without
affecting the clock speed of other components.

CPU Cache Ratio

The CPU Internal Bus Speed Ratio. The maximum should be the same as the CPU
Ratio.

BCLK/PCIE Frequency
The CPU speed is determined by the CPU Ratio multiplied with the BCLK.
Increasing the BCLK will increase the internal CPU clock speed but also affect the
clock speed of other components.

Spread Spectrum
Enable Spread Spectrum to reduce electromagnetic interference for passing EMI tests.
Disable to achieve higher clock speeds when overclocking.

BCLK Ratio
Configure BCLK Ratio to prevent the PC from crashing when the internal CPU
clock speed and clock speed of other components are too high.

Intel SpeedStep Technology

Intel SpeedStep technology allows processors to switch between multiple frequencies and voltage points for better power saving and heat dissipation.

Intel Turbo Boost Technology

Intel Turbo Boost Technology enables the processor to run above its base operating
frequency when the operating system requests the highest performance state.

Filter PLL Frequency

CPU BCLK Filter Frequency. Choose 1.6 for better overclocking capabilities.

Internal PLL Overvoltage

English

Enable for better stability.

PCIE PLL Selection

Select SB PLL when overclocking.

66

Z87 Extreme3

Long Duration Power Limit

Configure Package Power Limit 1 in watts. When the limit is exceeded, the CPU
ratio will be lowered after a period of time. A lower limit can protect the CPU and
save power, while a higher limit may improve performance.

Long Duration Maintained

Configure the period of time until the CPU ratio is lowered when the Long
Duration Power Limit is exceeded.

Short Duration Power Limit

Configure Package Power Limit 2 in watts. When the limit is exceeded, the CPU
ratio will be lowered immediately. A lower limit can protect the CPU and save
power, while a higher limit may improve performance.

Primary Plane Current Limit

Configure the current limit of the CPU under Turbo Mode in ampere. A lower
limit can protect the CPU and save power, while a higher limit may improve
performance.

GT Frequency
Configure the frequency of the integrated GPU.

GT Voltage Mode
Auto: For optimized settings.
Adaptive: Add voltage to the integrated GPU when the system is under heavy load.
Override: The voltage is fixed.

GT Adaptive Voltage
Configure the fixed voltage added to the integrated GPU.

GT Voltage Offset

English

Configure the voltage added to the integrated GPU when the system is under heavy load.

67

DRAM Timing Configuration

Load XMP Setting
Load XMP settings to overclock the DDR3 memory and perform beyond standard
specifications.

DRAM Reference Clock

Select Auto for optimized settings.

DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory module(s) inserted
and assign the appropriate frequency automatically.

DRAM Configuration

DRAM Tweaker
Fine tune the DRAM settings by leaving marks in checkboxes. Click OK to confirm and
apply your new settings.

English

CAS# Latency (tCL)

The time between sending a column address to the memory and the beginning of the data
in response.

68

Z87 Extreme3

RAS# to CAS# Delay (tRCD)

The number of clock cycles required between the opening of a row of memory and
accessing columns within it.

Row Precharge Time (tRP)

The number of clock cycles required between the issuing of the precharge command
and opening the next row.

RAS# Active Time (tRAS)

The number of clock cycles required between a bank active command and issuing the
precharge command.

Command Rate (CR)

The delay between when a memory chip is selected and when the first active command can
be issued.

Write Recovery Time (tWR)

The amount of delay that must elapse after the completion of a valid write operation,
before an active bank can be precharged.

Refresh Cycle Time (tRFC)

The number of clocks from a Refresh command until the first Activate command to
the same rank.

RAS to RAS Delay (tRRD)

The number of clocks between two rows activated in different banks of the same
rank.

Write to Read Delay (tWTR)

The number of clocks between the last valid write operation and the next read
command to the same internal bank.

Read to Precharge (tRTP)

The number of clocks that are inserted between a read command to a row precharge command to the same rank.

English

Four Activate Window (tFAW)

The time window in which four activates are allowed the same rank.

CAS Write Latency (tCWL)

Configure CAS Write Latency.

69

tREFI
Configure refresh cycles at an average periodic interval.

tCKE
Configure the period of time the DDR3 initiates a minimum of one refresh
command internally once it enters Self-Refresh mode.

tRDRD
Configure between module read to read delay.

tRDRDDR
Configure between module read to read delay from different ranks.

tRDRDDD
Use this to change DRAM tRWSR Auto/Manual settings. The default is [Auto].

tWRRD
Configure between module write to read delay.

tWRRDDR
Configure between module write to read delay from different ranks.

tWRRDDD
Use this to change DRAM tRRSR Auto/Manual settings. The default is [Auto].
Configure between module write to read delay from different DIMMs.

tWRWR
Configure between module write to write delay.

tWRWRDR
Configure between module write to write delay from different ranks.

tWRWRDD
Configure between module write to write delay from different DIMMs.

tRDWR
English

Configure between module read to write delay.

tRDWRDR
Configure between module read to write delay from different ranks.

70

Z87 Extreme3

tRDWRDD
Configure between module read to write delay from different DIMMs.

RTL (CHA)
Configure round trip latency for channel A.

RTL (CHB)
Configure round trip latency for channel B.

IO-L (CHA)
Configure IO latency for channel A.

IO-L (CHB)
Configure IO latency for channel B.

ODT WR (CHA)
Configure the memory on die termination resistors' WR for channel A.

ODT WR (CHB)
Configure the memory on die termination resistors' WR for channel B.

ODT NOM (CHA)

Use this to change ODT (CHA) Auto/Manual settings. The default is [Auto].

ODT NOM (CHB)

Use this to change ODT (CHB) Auto/Manual settings. The default is [Auto].

Command Tri State

Enable for DRAM power saving.

MRC Fast Boot

Enable Memory Fast Boot to skip DRAM memory training for booting faster.

FIVR Configuration
FIVR Switch Frequency Signature
English

Select whether to boost or lower the FIVR Switch Frequency.

FIVR Switch Frequency Offset

Configure the percentage of frequency boost or deduction.

71

CPU Voltage Mode

Auto: For optimized settings.
Adaptive: Add voltage to the CPU when the system is under heavy load.
Override: The voltage is fixed.

CPU Override Voltage

Configure the voltage added to the CPU when the system is under heavy load.

CPU Voltage Offset

Configure the dynamic CPU voltage added to the CPU.

CPU Cache Override Voltage

Add voltage to the CPU Cache when the system is under heavy load.

CPU Cache Adaptive Voltage

Configure the voltage added to the CPU Cache when the system is under heavy
load.

CPU Cache Voltage Offset

Configure the voltage for the CPU Cache. Setting the voltage higher may increase
system stability when overclocking.

System Agent Voltage Offset

Configure the voltage for the System Agent. Setting the voltage higher may increase
system stability when overclocking.

CPU Analog IO Voltage Offset

CPU I/O Analog Voltage.

CPU Digital IO Voltage Offset

CPU I/O Digital Voltage.

CPU Integrated VR Faults

Disable FIVR Faults to raise the threshold to trigger CPU over current protection
and over voltage protection for better overclocking capabilities.

English

CPU Integrated VR Efficiency Mode

Enable FIVR Efficiency Management for power saving. Disable for better performance and
overclocking capabilities.

72

Z87 Extreme3

Voltage Configuration
CPU Input Voltage
Configure the voltage for the CPU.

CPU Load-Line Calibration

CPU Load-Line Calibration helps prevent CPU voltage droop when the system is
under heavy load.

DRAM Voltage
Use this to configure DRAM Voltage. The default value is [Auto].

PCH 1.05V Voltage

Chipset 1.05V Voltage. Use default settings for best performance.

PCH 1.5V Voltage

English

I/O 1.5V Voltage. Use default settings for best performance.

73

4.4 Advanced Screen

In this section, you may set the configurations for the following items: CPU
Configuration, Chipset Configuration, Storage Configuration, Intel Rapid Start
Technology, Intel Smart Connect Technology, Super IO Configuration, ACPI Configuration and USB Configuration.

Setting wrong values in this section may cause the system to malfunction.

English
74

Z87 Extreme3

4.4.1 CPU Configuration

Intel Hyper Threading Technology

Intel Hyper Threading Technology allows multiple threads to run on each core, so that the
overall performance on threaded software is improved.

Active Processor Cores

Select the number of cores to enable in each processor package.

CPU C States Support

Enable CPU C States Support for power saving. It is recommended to keep C3, C6
and C7 all enabled for better power saving.

Enhanced Halt State (C1E)

Enable Enhanced Halt State (C1E) for lower power consumption.

CPU C3 State Support

Enable C3 sleep state for lower power consumption.

English

CPU C6 State Support

Enable C6 deep sleep state for lower power consumption.

CPU C7 State Support

Enable C7 deep sleep state for lower power consumption.

75

Package C State Support

Enable CPU, PCIe, Memory, Graphics C State Support for power saving.

CPU Thermal Throttling

Enable CPU internal thermal control mechanisms to keep the CPU from overheating.

No-Execute Memory Protection

Processors with No-Execution Memory Protection Technology may prevent certain
classes of malicious buffer overflow attacks.

Intel Virtualization Technology

Intel Virtualization Technology allows a platform to run multiple operating systems
and applications in independent partitions, so that one computer system can
function as multiple virtual systems.

Hardware Prefetcher
Automatically prefetch data and code for the processor. Enable for better
performance.

Adjacent Cache Line Prefetch

Automatically prefetch the subsequent cache line while retrieving the currently
requested cache line. Enable for better performance.

English
76

Z87 Extreme3

4.4.2 Chipset Configuration

Primary Graphics Adapter

Select a primary VGA.

VT-d
Intel Virtualization Technology for Directed I/O helps your virtual machine
monitor better utilize hardware by improving application compatibility and
reliability, and providing additional levels of manageability, security, isolation, and
I/O performance.

PCIE2 Link Speed

Select the link speed for PCIE2.

Share Memory
Configure the size of memory that is allocated to the integrated graphics processor
when the system boots up.

IGPU Multi-Monitor
English

Select disable to disable the integrated graphics when an external graphics card is
installed. Select enable to keep the integrated graphics enabled at all times.

77

Render Standby
Power down the render unit when the GPU is idle for lower power consumption.

Onboard HD Audio
Enable/disable onboard HD audio. Set to Auto to enable onboard HD audio and
automatically disable it when a sound card is installed.

Front Panel
Enable/disable front panel HD audio.

On/Off Play
With ASRock On/Off Play users can connect their portable audio devices, such
as an MP3 player or a mobile phone to the PC and listen to music through the
computer's speakers even when the computer is turned off.

Onboard HDMI HD Audio

Enable audio for the onboard digital outputs.

Onboard LAN1
Enable or disable the onboard network interface controller.

Deep Sleep
Configure deep sleep mode for power saving when the computer is shut down.

Restore on AC/Power Loss

Select the power state after a power failure. If [Power Off] is selected, the power will
remain off when the power recovers. If [Power On] is selected, the system will start
to boot up when the power recovers.

Good Night LED

By enabling Good Night LED, the Power/HDD LEDs will be switched off when the
system is on. It will also automatically switch off the Power and Keyboard LEDs
when the system enters into Standby/Hibernation mode.

English
78

Z87 Extreme3

4.4.3 Storage Configuration

SATA Controller(s)
Enable/disable the SATA controllers.

SATA Mode Selection

IDE: For better compatibility.
AHCI: Supports new features that improve performance.
RAID: Combine multiple disk drives into a logical unit.

AHCI (Advanced Host Controller Interface) supports NCQ and other new features that
will improve SATA disk performance but IDE mode does not have these advantages.

SATA Aggressive Link Power Management

English

SATA Aggressive Link Power Management allows SATA devices to enter a low
power state during periods of inactivity to save power. It is only supported by AHCI
mode.

Dynamic Storage Accelerator

Keep this option enabled for higher HDD and SDD I/O performance, lower latency
and increased system responsiveness.

79

Hard Disk S.M.A.R.T.

S.M.A.R.T stands for Self-Monitoring, Analysis, and Reporting Technology. It is a
monitoring system for computer hard disk drives to detect and report on various
indicators of reliability.

English
80

Z87 Extreme3

4.4.4 Intel Rapid Start Technology

Intel Rapid Start Technology

English

Intel Rapid Start Technology is a new zero power hibernation mode which allows
users to resume in just 5-6 seconds.

81

4.4.5 Intel Smart Connect Technology

Intel Smart Connect Technology

Intel Smart Connect Technology automatically updates your email and social
networks, such as Twitter, Facebook, etc. while the computer is in sleep mode.

English
82

Z87 Extreme3

4.4.6 Super IO Configuration

Serial Port
Enable or disable the Serial port.

Serial Port Address

Select the address of the Serial port.

Infrared Port

English

Enable or disable the Infrared port.

83

4.4.7 ACPI Configuration

Suspend to RAM
Select disable for ACPI suspend type S1. It is recommended to select auto for ACPI
S3 power saving.

Check Ready Bit

Enable to enter the operating system after S3 only when the hard disk is ready, this
is recommended for better system stability.

ACPI HPET Table

Enable the High Precision Event Timer for better performance and to pass WHQL
tests.

PS/2 Keyboard Power On

Allow the system to be waked up by a PS/2 Keyboard.

PCI Devices Power On

Allow the system to be waked up by a PCI device and enable wake on LAN.

English

Wake From Onboard LAN

Allow the system to be waked up by the Onboard Intel I217V LAN.

84

Z87 Extreme3

Ring-In Power On
Allow the system to be waked up by onboard COM port modem Ring-In signals.

RTC Alarm Power On

Allow the system to be waked up by the real time clock alarm. Set it to By OS to let
it be handled by your operating system.

USB Keyboard/Remote Power On

Allow the system to be waked up by an USB keyboard or remote controller.

USB Mouse Power On

English

Allow the system to be waked up by an USB mouse.

85

4.4.8 USB Configuration

USB Controller
Enable or disable all the USB ports.

USB 3.0 Controller

Enable or disable all the USB 3.0 ports.

Legacy USB Support

Enable or disable Legacy OS Support for USB 2.0 devices. If you encounter USB
compatibility issues it is recommended to disable legacy USB support. Select UEFI
Setup Only to support USB devices under the UEFI setup and Windows/Linux
operating systems only.

Legacy USB 3.0 Support

Enable or disable Legacy OS Support for USB 3.0 devices.

English
86

Z87 Extreme3

4.5 Tools

System Browser
ASRock System Browser shows the overview of your current PC and the devices
connected.

OMG (Online Management Guard)

Administrators are able to establish an internet curfew or restrict internet access
at specified times via OMG. You may schedule the starting and ending hours of
internet access granted to other users. In order to prevent users from bypassing
OMG, guest accounts without permission to modify the system time are required.

UEFI Tech Service

Contact ASRock Tech Service if you are having trouble with your PC. Please setup
network configuration before using UEFI Tech Service.

Easy RAID Installer

English

Easy RAID Installer helps you to copy the RAID driver from the support CD to
your USB storage device. After copying the drivers please change the SATA mode to
RAID, then you can start installing the operating system in RAID mode.

Easy Driver Installer

For users that dont have an optical disk drive to install the drivers from our support
CD, Easy Driver Installer is a handy tool in the UEFI that installs the LAN driver
to your system via an USB storage device, then downloads and installs the other
required drivers automatically.

87

Instant Flash
Save UEFI files in your USB storage device and run Instant Flash to update your
UEFI.

Internet Flash
ASRock Internet Flash downloads and updates the latest UEFI firmware version
from our servers for you. Please setup network configuration before using Internet
Flash.
*For BIOS backup and recovery purpose, it is recommended to plug in your USB
pen drive before using this function.

Network Configuration
Use this to configure internet connection settings for Internet Flash.

Internet Setting
Enable or disable sound effects in the setup utility.

UEFI Download Server

Select a server to download the UEFI firmware.

English

Dehumidifier Function
If Dehumidifier Function is enabled, the computer will power on automatically to
dehumidify the system after entering S4/S5 state.

88

Z87 Extreme3

Dehumidifier Period
Configure the period of time until the computer powers on and enables
Dehumidifier after entering S4/S5 state.

Dehumidifier Duration
Configure the duration of the dehumidifying process before it returns to S4/S5
state.

Dehumidifier CPU Fan Setting

Configure the speed of the CPU fan while Dehumidifier is enabled. The higher the
value, the faster the fan speed.
Max: 255
Min: 1

Save User Default

Type a profile name and press enter to save your settings as user default.

Load User Default

English

Load previously saved user defaults.

89

4.6 Hardware Health Event Monitoring Screen

This section allows you to monitor the status of the hardware on your system,
including the parameters of the CPU temperature, motherboard temperature, fan
speed and voltage.

CPU Fan 1 & 2 Setting

Select a fan mode for CPU Fans 1&2, or choose Customize to set 5 CPU
temperatures and assign a respective fan speed for each temperature.

Chassis Fan 1 Setting

Select a fan mode for Chassis Fan 1, or choose Customize to set 5 CPU temperatures
and assign a respective fan speed for each temperature.

Chassis Fan 2 Setting

Select a fan mode for Chassis Fan 2, or choose Customize to set 5 CPU temperatures
and assign a respective fan speed for each temperature.

Chassis Fan 3 Setting

English

Select a fan mode for Chassis Fan 3, or choose Customize to set 5 CPU temperatures
and assign a respective fan speed for each temperature.

Over Temperature Protection

When Over Temperature Protection is enabled, the system automatically shuts
down when the motherboard is overheated.

90

Z87 Extreme3

4.7 Boot Screen

This section displays the available devices on your system for you to configure the
boot settings and the boot priority.

Fast Boot
Fast Boot minimizes your computer's boot time. In fast mode you may not boot
from an USB storage device. Ultra Fast mode is only supported by Windows 8 and
the VBIOS must support UEFI GOP if you are using an external graphics card.
Please notice that Ultra Fast mode will boot so fast that the only way to enter this
UEFI Setup Utility is to Clear CMOS or run the Restart to UEFI utility in Windows.

Boot From Onboard LAN

Allow the system to be waked up by the onboard LAN.

Setup Prompt Timeout

Configure the number of seconds to wait for the setup hot key.

Bootup Num-Lock
Select whether Num Lock should be turned on or off when the system boots up.

English

Boot Beep
Select whether the Boot Beep should be turned on or off when the system boots up. Please
note that a buzzer is needed.

91

Full Screen Logo

Enable to display the boot logo or disable to show normal POST messages.

AddOn ROM Display

Enable AddOn ROM Display to see the AddOn ROM messages or configure the
AddOn ROM if you've enabled Full Screen Logo. Disable for faster boot speed.

Boot Failure Guard

If the computer fails to boot for a number of times the system automatically restores
the default settings.

Boot Failure Guard Count

Configure the number of attempts to boot until the system automatically restores
the default settings.

CSM (Compatibility Support Module)

CSM
English

Enable to launch the Compatibility Support Module. Please do not disable unless
youre running a WHCK test. If you are using Windows 8 64-bit and all of your
devices support UEFI, you may also disable CSM for faster boot speed.

92

Z87 Extreme3

Launch PXE OpROM Policy

Select UEFI only to run those that support UEFI option ROM only. Select Legacy
only to run those that support legacy option ROM only. Do not launch?

Launch Storage OpROM Policy

Select UEFI only to run those that support UEFI option ROM only. Select Legacy
only to run those that support legacy option ROM only. Do not launch?

Launch Video OpROM Policy

English

Select UEFI only to run those that support UEFI option ROM only. Select Legacy
only to run those that support legacy option ROM only. Do not launch?

93

4.8 Security Screen

In this section you may set or change the supervisor/user password for the system.
You may also clear the user password.

Supervisor Password
Set or change the password for the administrator account. Only the administrator
has authority to change the settings in the UEFI Setup Utility. Leave it blank and
press enter to remove the password.

User Password
Set or change the password for the user account. Users are unable to change the
settings in the UEFI Setup Utility. Leave it blank and press enter to remove the
password.

Secure Boot
Enable to support Windows 8 Secure Boot.

English
94

Z87 Extreme3

4.9 Exit Screen

Save Changes and Exit

When you select this option the following message, Save configuration changes
and exit setup? will pop out. Select [OK] to save changes and exit the UEFI SETUP
Utility.

Discard Changes and Exit

When you select this option the following message, Discard changes and exit
setup? will pop out. Select [OK] to exit the UEFI SETUP Utility without saving
any changes.

Discard Changes
When you select this option the following message, Discard changes? will pop
out. Select [OK] to discard all changes.

Load UEFI Defaults

Load UEFI default values for all options. The F9 key can be used for this operation.

Launch EFI Shell from filesystem device

English

Copy shellx64.efi to the root directory to launch EFI Shell.

95

Contact Information
If you need to contact ASRock or want to know more about ASRock, youre welcome
to visit ASRocks website at http://www.asrock.com; or you may contact your dealer
for further information. For technical questions, please submit a support request
form at http://www.asrock.com/support/tsd.asp

ASRock Incorporation
2F., No.37, Sec. 2, Jhongyang S. Rd., Beitou District,
Taipei City 112, Taiwan (R.O.C.)

ASRock EUROPE B.V.

Bijsterhuizen 3151
6604 LV Wijchen
The Netherlands
Phone: +31-24-345-44-33
Fax: +31-24-345-44-38

ASRock America, Inc.

13848 Magnolia Ave, Chino, CA91710
U.S.A.
Phone: +1-909-590-8308
Fax: +1-909-590-1026

English
96