NOTEBOOK

REFERENCEGUIDE

Contents
Chapter 1: About This Reference . . . . . . . . . . . 1
About this guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Accessing your online User Guide . . . . . . . . . . . . . . . . . . . . . . . . 2
Gateway contact information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Gateway model and serial number . . . . . . . . . . . . . . . . . . . . 3
Microsoft Certificate of Authenticity . . . . . . . . . . . . . . . . . . . . . . 3
For more information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Chapter 2: Checking Out Your Notebook . . . . . 5

Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Left . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Right . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Back . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Bottom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Keyboard area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
LCD panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Chapter 3: Setting Up and Getting Started . . 15

Working safely and comfortably . . . . . . . . . . . . . . . . . . . . . . . . 16
Reducing eye strain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Setting up your computer desk and chair . . . . . . . . . . . . . 17
Sitting at your notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Avoiding discomfort and injury from repetitive strain . . 17
Connecting the AC adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Protecting from power source problems . . . . . . . . . . . . . 19
Connecting to a broadband modem or network . . . . . . . . . . 20
Connecting the optional dial-up modem . . . . . . . . . . . . . . . . . 21
Starting your notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Waking up your notebook . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Turning off your notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
Restarting (rebooting) your notebook . . . . . . . . . . . . . . . . . . . 24
Using the status indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25
Using the keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Key types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

Contents

System key combinations . . . . . . . . . . . . . . . . . . . . . . . . . .

Using the optional fingerprint reader . . . . . . . . . . . . . . . . . . .
Running the TouchStrip Tutorial . . . . . . . . . . . . . . . . . . . . .
Enrolling your fingerprints . . . . . . . . . . . . . . . . . . . . . . . . .
Using the Fingerprint Control Center . . . . . . . . . . . . . . . .
Using the password bank . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the fingerprint reader features . . . . . . . . . . . . . . . .
Using the EZ Pad touchpad . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the optional multimedia panel . . . . . . . . . . . . . . . . . . . .
Using the optional webcam . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting the brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting the volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Turning your wireless radio on or off . . . . . . . . . . . . . . . . . . .
IEEE 802.11 wireless network radio . . . . . . . . . . . . . . . . . .
Bluetooth radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

28
31
31
32
34
35
36
37
40
41
44
45
47
47
49

Chapter 4: Using Drives and Accessories . . . . 51

Using the DVD drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Identifying drive types . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using a DVD drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the memory card reader . . . . . . . . . . . . . . . . . . . . . . . . .
Memory card types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inserting a memory card . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using a memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Removing a memory card . . . . . . . . . . . . . . . . . . . . . . . . . .
Adding and removing an Express Card . . . . . . . . . . . . . . . . . .
Installing a printer or other peripheral device . . . . . . . . . . . .
Connecting a USB device . . . . . . . . . . . . . . . . . . . . . . . . . . .
Viewing the display on a projector, monitor, or television .
Adjusting the display properties . . . . . . . . . . . . . . . . . . . .
Using the projector or monitor for a presentation . . . .
Ordering accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

52
52
53
55
55
56
56
56
57
58
58
59
61
62
63

Chapter 5: Managing Power . . . . . . . . . . . . . . 65

Monitoring the battery charge . . . . . . . . . . . . . . . . . . . . . . . . . 66
Recharging the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Changing batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

ii

www.gateway.com

Recalibrating the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Extending battery life . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Maximizing battery performance . . . . . . . . . . . . . . . . . . . .69
Conserving battery power . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Using alternate power sources . . . . . . . . . . . . . . . . . . . . . . 70
Changing power modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Changing notebook power settings . . . . . . . . . . . . . . . . . . . . . 72
Changing the power plan . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Changing advanced settings . . . . . . . . . . . . . . . . . . . . . . . . 74

Chapter 6: Traveling with Your Notebook . . . 77

Packing your notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Traveling by air . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Dial-up modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Radio frequency wireless connections . . . . . . . . . . . . . . . . . . . 79
Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80
Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Additional tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81

Chapter 7: Maintaining Your Notebook . . . . . 83

Caring for your notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Cleaning your notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Cleaning the exterior . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Cleaning the keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Cleaning the notebook screen . . . . . . . . . . . . . . . . . . . . . . . 85
Maintaining the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
Storing batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Cleaning CDs or DVDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
Recovering your system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
Recovering pre-installed software and drivers . . . . . . . . 88
Using Microsoft System Restore . . . . . . . . . . . . . . . . . . . . . 95
Recovering your system to its factory condition . . . . . . . 98
Recovering your system using the Windows DVD . . . . . . 99

Chapter 8: Upgrading Your Notebook . . . . . 101

Preventing static electricity discharge . . . . . . . . . . . . . . . . . .102
Adding or replacing memory modules . . . . . . . . . . . . . . . . . .103

iii

Contents

Replacing the hard drive kit . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

Chapter 9: Troubleshooting . . . . . . . . . . . . . . 113

Safety guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
First steps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CD drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Diskette drive (external) . . . . . . . . . . . . . . . . . . . . . . . . . . .
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DVD drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ethernet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Express Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
File management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fingerprint reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Hard drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Media Center . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Memory card reader . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Modem (cable or DSL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Modem (dial-up) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mouse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Networks (wired) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Networks (wireless) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Printer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Status indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Touchpad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Telephone support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Before calling Gateway Customer Care . . . . . . . . . . . . .

iv

114
114
115
115
115
115
115
116
117
119
119
119
120
120
121
122
123
126
127
127
127
130
131
133
135
135
136
137
137
138
138
138
138

www.gateway.com

Appendix A: Legal Information. . . . . . . . . . . 141

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151

Contents

vi

CHAPTER1
About This Reference

About this guide

Accessing your online User Guide
Gateway contact information
Microsoft Certificate of Authenticity
For more information

CHAPTER 1: About This Reference

About this guide

This guide includes information and maintenance instructions
that are specific to your model of Gateway notebook. For all
other notebook information, see your online User Guide.

Accessing your online User

Guide
In addition to this guide, your online User Guide has been
included on your hard drive. Your User Guide is an in-depth,
easy-to-read manual that includes information on the
following topics:
Help and technical support
Using and customizing Windows and other software
Using the Internet
Protecting your files
Playing and recording media
Networking
To access your online User Guide:
Click (Start), All Programs, then click Gateway
Documentation.

Gateway contact information

Important
The labels shown in this section are for informational purposes only. Label
information varies by model, features ordered, and location.

www.gateway.com

Gateway model and serial number

The label on the bottom of your notebook contains information
that identifies your notebook model and its features. Gateway
Customer Care will need this information if you call for
assistance.
Online Support:
Tech Support Phone:
Hours:
Model:
S/No:

Microsoft Certificate of
Authenticity
The Microsoft Certificate of Authenticity label found on the
bottom of your notebook includes the product key code for
your operating system.

For more information

For more information about your notebook, visit Gateways
Support page at www.gateway.com or the Web address shown
on your notebooks label. The Support page also has links to
additional Gateway documentation and detailed specifications.

CHAPTER 1: About This Reference

CHAPTER2
Checking Out Your Notebook

Front
Left
Right
Back
Bottom
Keyboard area
LCD panel

CHAPTER 2: Checking Out Your Notebook

Front
Battery charge indicator
Power indicator
Headphone jack
Microphone jack

Component

Icon

Description

Microphone jack

Plug a microphone into this jack.

Headphone jack

Plug amplified speakers or headphones into this

jack. The built-in speakers are turned off when
speakers or headphones are plugged into this
jack.

Power indicator

Battery charge
indicator

LED on - Notebook is on.

LED blinking - Notebook is in Sleep or Hybrid
Sleep mode.
LED off - Notebook is off.

LED blue - Battery is fully charged.

LED purple - Battery is charging.

LED blinking red - Battery charge is very low.

LED solid red - Battery is malfunctioning.

Important: This LED only lights up when your
notebook is connected to AC power or the
battery charge is very low.

www.gateway.com

Left
Ethernet jack

Optional HDMI out jack

Component

USB ports

Icon

Memory card reader

Ventilation fan

Wireless network switch

Express Card slot

Description

Ethernet jack

Plug an Ethernet network cable into this jack.

Plug the other end of the cable into a cable
modem, DSL modem, or an Ethernet network
jack. For more information, see Connecting to a
broadband modem or network on page 20.

Memory card
reader

Insert a memory card from a digital camera,

MP3 player, PDA, or cellular telephone into the
memory card reader. For more information, see
Using the memory card reader on page 55.
The memory card reader supports Memory
Stick, Memory Stick Pro, Mini Secure
Digital, MultiMediaCard,
RS-MultiMediaCard, Secure Digital, and
xD-Picture Cardcards.
Important: RS-Multimedia Card and Mini Secure
Digital cards require the use of an adapter that
is available with the media.

HDMI out jack

(optional)

USB ports

HDMI

Plug an HDMI device, such as a high definition

television, into this optional jack. For more
information, see Viewing the display on a
projector, monitor, or television on page 59.
Plug USB devices (such as a diskette drive, flash
drive, printer, scanner, camera, keyboard, or
mouse) into these ports.

CHAPTER 2: Checking Out Your Notebook

Component

Icon

Description

Ventilation fan

Helps cool internal components.

Warning: Do not work with the notebook resting
on your lap. If the air vents are blocked, the
notebook may become hot enough to harm your
skin.
Caution: Do not block or insert objects into these
slots. If these slots are blocked, your notebook
may overheat resulting in unexpected shutdown
or permanent damage to the notebook.
Caution: Provide adequate space around your
notebook so air vents are not obstructed. Do not
use the notebook on a bed, sofa, rug, or other
similar surface.

Express Card slot

Insert one Type 54 Express Card into this slot. For

more information, see Adding and removing an
Express Card on page 57.

Wireless network
switch

Enable or disable the optional IEEE 802.11

wireless network radio and optional Bluetooth
radio. The switch must be in the enable position
to turn either radio on or off using the FN+F2 or
FN+F6 buttons. For more information, see
Turning your wireless radio on or off on
page 47.
Warning: Radio frequency wireless
communication can interfere with equipment on
commercial aircraft. Current aviation regulations
require wireless devices to be turned off while
traveling in an airplane. IEEE 802.11 and
Bluetooth communication devices are examples
of devices that provide wireless communication.

www.gateway.com

Right

USB port
DVD drive

Component

Icon

Description

DVD drive

Insert CDs or DVDs into this drive. For more

information, see Using the DVD drive on
page 52. To determine the type of drive in your
notebook, examine the drive trays plastic cover
and compare the logo to those listed in
Identifying drive types on page 52.

USB port

Plug a USB device (such as a diskette drive, flash

drive, printer, scanner, camera, keyboard, or
mouse) into this port.

CHAPTER 2: Checking Out Your Notebook

Back
Power connector

Optional modem jack Kensington lock slot

Monitor port

Component

Icon

Description

Modem jack
(optional)

Plug a dial-up modem cable into this optional

jack. For more information, see Connecting the
optional dial-up modem on page 21.

Kensington
lock slot

Secure your notebook to an object by

connecting a Kensington cable lock to this slot.

Monitor port

Plug an analog VGA monitor or projector into this

port. For more information, see Viewing the
display on a projector, monitor, or television on
page 59.

Power connector

Plug the AC adapter cable into this connector.

10

www.gateway.com

Bottom
Battery

Battery lock

Battery
latch
Customer
care label

Online Support:
Tech Support Phone:
Hours:
Model:
S/No:

Memory
bay

Hard drive bay

Component

Icon

Description

Customer
Care label

Includes the Customer Care contact information. For

more information, see Gateway contact information
on page 2.

Battery latch

Slide to release the battery. For more information, see

Changing batteries on page 67.

Battery

Provides power when the notebook is not plugged into

AC power.

Battery lock

Slide to unlock the battery. For more information, see

Changing batteries on page 67.

Memory bay

Memory modules are located in this bay. For more

information, see Adding or replacing memory
modules on page 103.

Hard drive
bay

The hard drive is located in this bay. For more

information, see Replacing the hard drive kit on
page 107.

11

CHAPTER 2: Checking Out Your Notebook

Keyboard area
Speaker
Speaker

Optional multimedia panel

Power
button

Keyboard

Status indicators Optional fingerprint

reader

Component

Icon

Touchpad

Description

Keyboard

Provides all the features of a full-sized, computer

keyboard. For more information, see Using the
keyboard on page 26.

Power button

Press to turn the power on or off. You can also configure

the power button for Sleep/Resume mode. For more
information on configuring the power button mode,
see Changing advanced settings on page 74.

Speakers

Provide audio output when headphones or amplified

speakers are not plugged in.

Multimedia
panel
(optional)

Use to control playback of CDs and DVDs. The panel

includes a capacitive volume control. For more
information, see Using the optional multimedia panel
on page 40.

Touchpad

Provides all the functionality of a mouse. For more

information, see Using the EZ Pad touchpad on
page 37.

12

www.gateway.com

Component

Icon

Description

Fingerprint
reader
(optional)

Provides enhanced security. For more information, see

Using the optional fingerprint reader on page 31.

Status
indicators

Inform you when a drive is in use or when a button has

been pressed that affects how the keyboard is used. For
more information, see Using the status indicators on
page 25.

13

CHAPTER 2: Checking Out Your Notebook

LCD panel
Optional microphone
Optional webcam
Optional webcam status indicator

Component

Icon

Description

Microphone
(optional)

Use to talk through when making Voice over Internet

Protocol (VoIP) calls.
Important: The optional microphone is only available
when purchased with the optional webcam.

Webcam
(optional)

Use to let others see who they are communicating with

when making VoIP calls. For more information, see
Using the optional webcam on page 41.
Important: The optional webcam is only available
when purchased with the optional microphone.

Webcam
status
indicator
(optional)

Turns on when the webcam is turned on.

14

CHAPTER3
Setting Up and Getting Started
Working safely and comfortably
Connecting the AC adapter
Connecting to a broadband modem or
network
Connecting the optional dial-up modem
Starting your notebook
Turning off your notebook
Restarting (rebooting) your notebook
Using the status indicators
Using the keyboard
Using the optional fingerprint reader
Using the EZ Pad touchpad
Using the optional multimedia panel
Using the optional webcam
Adjusting the brightness
Adjusting the volume
Turning your wireless radio on or off

15

CHAPTER 3: Setting Up and Getting Started

Working safely and

comfortably
Before using your notebook, follow these general guidelines
for setting up a safe and comfortable work area and avoiding
discomfort and strain:
Keep hands and arms parallel to the floor.
Adjust the screen so it is perpendicular to your line of
sight.
Place your feet flat on the floor or on a footrest.
Although notebooks are sometimes called laptops, do
not use your notebook while it rests on your unprotected
lap. Notebook operating temperatures can become quite
high, increasing the risk of burns to your legs. Instead,
use a laptop desk to protect your legs.
Do not use the notebook on any soft, conforming
surface, such as your lap, a blanket, carpet, or a sofa. Soft
surfaces can block your notebooks ventilation openings,
leading to overheating, permanent damage to your
notebook, and fire danger. Instead, place your notebook
on a rigid, hard surface, and make sure that you keep the
ventilation openings on the sides clear.
Warning
Do not use your notebook on a soft surface, such as your lap, a
blanket, carpet, or a sofa. You must keep your notebooks ventilation
openings clear of obstructions, or your notebook may overheat,
increasing the risk of fire and personal injury.

Reducing eye strain

Sunlight or bright indoor lighting should not reflect on the
screen or shine directly into your eyes.
Position the computer desk and screen so you can avoid
glare on your screen and light shining directly into your
eyes. Reduce glare by installing shades or curtains on
windows, and by installing a glare screen filter.
Use soft, indirect lighting in your work area. Do not use
your notebook in a dark room.

Avoid focusing your eyes on your screen for long periods

16

of time. Every 10 or 15 minutes, look around the room,

and try to focus on distant objects.
Where feasible, keep your head vertical while looking at
the screen. If you use an external keyboard, raise the
notebook so the top of its screen is no higher than eye
level.

www.gateway.com

Setting up your computer desk and chair

When you are setting up your computer desk and chair, make
sure that the desk is the appropriate height and the chair helps
you maintain good posture.
Select a flat surface for your computer desk.
Adjust the height of the computer desk so your hands
and arms are positioned parallel to the floor when you
use the keyboard and touchpad. If the desk is not
adjustable or is too tall, consider using an adjustable
chair to control your arms height above the keyboard.
Use an adjustable chair that is comfortable, distributes
your weight evenly, and keeps your body relaxed.
Position your chair so the keyboard is at or slightly below
the level of your elbow. This position lets your shoulders
relax while you type.
Adjust the chair height, adjust the forward tilt of the seat,
or use a footrest to distribute your weight evenly on the
chair and relieve pressure on the back of your thighs.
Adjust the back of the chair so it supports the lower
curve of your spine. You can use a pillow or cushion to
provide extra back support.

Sitting at your notebook

Avoid bending, arching, or angling your wrists. Make
sure that they are in a relaxed position when you type.

Do not slouch forward or lean far back. Sit with your back

straight so your knees, hips, and elbows form right

angles when you work.
Take breaks to stand and stretch your legs.
Avoid twisting your torso or neck.

Avoiding discomfort and injury from repetitive

strain
Vary your activities to avoid excessive repetition.
Take breaks to change your position, stretch your
muscles, and relieve your eyes.

Find ways to break up the work day, and schedule a

variety of tasks.

17

CHAPTER 3: Setting Up and Getting Started

Connecting the AC adapter

You can run your notebook using an AC adapter or your
notebooks battery. The battery was shipped to you partially
charged. You should use the AC adapter right away to fully
charge the battery. Allow three hours for the battery to fully
charge.
Warning
Do not attempt to disassemble the AC adapter. The AC adapter has no
user-replaceable or user-serviceable parts inside. The AC adapter has dangerous
voltages that can cause serious injury or death. Contact Gateway about returning
defective AC adapters.

Caution
Make sure that you use the AC adapter that came with your notebook or
one of the same type purchased from Gateway. Replace the power cord if it
becomes damaged. The replacement cord must be of the same type and voltage
rating as the original cord or your notebook may be damaged.

Important
If the battery is not fully charged before you use your notebook on battery
power for the first time, the battery life may be much shorter than you expect.
If the battery life seems short even after being charged for three hours, the
battery may need to be recalibrated. For information on recalibrating the battery,
see Recalibrating the battery on page 68.

To connect the AC adapter:

1 Connect the power cord to the AC adapter.

18

www.gateway.com

2 Connect the AC adapter to your notebooks power

connector.

3 Plug the power cord into a wall outlet. The battery

charge indicator turns on (see Front on page 6 for the
location of the battery charge indicator). If the battery
charge indicator does not turn on, complete the
following steps until it turns on:

Unplug the adapter from your notebook, then plug

it back in.
Press FN+F1 to toggle the status lights on and off.
Make sure the power cord is firmly attached to the
AC adapter.
Plug the power cord into a different wall outlet.

4 When you finish using your notebook for the first time,
turn off your notebook and leave your notebook
connected to AC power until the battery charge indicator
turns blue.
Important
If the battery charge indicator does not turn blue after three hours,
contact Gateway Customer Care at the location shown on the Customer
Care label. For more information, see Gateway contact information on
page 2.

Protecting from power source problems

During a power surge, the voltage level of electricity coming
into your notebook can increase to levels far above normal
levels and cause data loss or system damage. Protect your

19

CHAPTER 3: Setting Up and Getting Started

notebook and peripheral devices by connecting them to a

surge protector, which absorbs voltage surges and prevents
them from reaching your notebook.
Warning
High voltages can enter your notebook through both the power cord and
the modem connection. To protect your notebook and avoid electrical shock, use
a surge protector. If you have a telephone modem, use a surge protector that has
a modem jack. If you have a cable modem, use a surge protector that has an
antenna/cable TV jack. During an electrical storm, unplug both the surge
protector and the modem.

Connecting to a broadband
modem or network
Your notebook has a network jack that you can use to connect
to a cable or DSL modem or to a wired Ethernet network.
To connect to a cable or DSL modem or to a wired
Ethernet network:
1 Insert one end of the network cable into the network
jack
on your notebook.

Tip
When using a cable with a sleeve over the plug, pull the sleeve
back to make sure that the plug locks into the jack.

2 Insert the other end of the network cable into a cable

modem, DSL modem, or Ethernet network jack.

20

www.gateway.com

Connecting the optional dial-up

modem
Your notebook may have a built-in 56K modem that you can
use to connect to a standard telephone line.
Warning
To reduce the risk of fire, use only No. 26 AWG or larger (for example, No.
24 AWG) UL-listed or CSA-certified telecommunication line cord for your dialup
modem connection.

To connect the optional modem:

1 Insert one end of the modem cable into the modem

jack

on your notebook.

2 Insert the other end of the modem cable into a telephone

wall jack.
Important
The modem will not work with digital or PBX telephone lines.

Starting your notebook

Warning
Do not work with the notebook resting on your lap. If the air vents are
blocked, the notebook may become hot enough to harm your skin.

Caution
Provide adequate space around your notebook so air vents are not
obstructed. Do not use the notebook on a bed, sofa, rug, or other similar surface.

21

CHAPTER 3: Setting Up and Getting Started

To start your notebook:

1 Lift the LCD panel.

2 Press the power button located above the keyboard.

Tip
For more information about changing the power button mode,
see Changing advanced settings on page 74.

3 If you are starting your notebook for the first time, follow
the on-screen instructions to select the language and
time zone and to create your first user account.

4 Attach and turn on any peripheral devices, such as

printers, scanners, and speakers.
Tip
For more information about connecting peripheral devices, see
Installing a printer or other peripheral device on page 58.

Tip
See the documentation that came with each device for its setup
instructions.

5 To open the main menu, click

(Start). From that

menu, you can run programs and search for files. For
more information on using Windows, see Using
Windows and Customizing Windows in your online
User Guide.

22

www.gateway.com

Waking up your notebook

When you have not used your notebook for several minutes or
if you close the LCD panel without turning off your notebook,
it may enter a power-saving mode called Sleep. While in Sleep
mode, the power indicator flashes. If your notebook is in Sleep
mode, press the power button to wake it up.
Tip
For more information about Sleep mode, see Changing power modes on
page 71.

Turning off your notebook

Putting your notebook into Sleep mode is the easiest way to
power down your notebook. Although it does not turn your
notebook completely off, it turns off or slows down most
system operations to save power. Sleep mode saves your
desktop layout so the next time you restore power, the
programs are laid out just as you left them. Waking your
notebook from a Sleep state is much faster than turning on
your notebook after it has been turned completely off.
Hibernate mode is an alternative to Sleep mode. In Hibernate
mode, your notebook is turned completely off. When you wake
your notebook from Hibernate mode, however, the programs
that were running when your notebook entered Hibernate
mode are running just as you left them.
To put your notebook to sleep:
Click (Start), then click
(power). The notebook
saves your session and partially shuts down to save
power.
-ORPress FN+F3.
Tip
You can change the Sleep mode from the standard Sleep mode (default)
to Hybrid Sleep. For more information about Sleep mode, see Changing power
modes on page 71.

To put your notebook into hibernation:

Click (Start), click the arrow next to the lock icon, then
click Hibernate. The notebook saves your session and
shuts down to save power.

23

CHAPTER 3: Setting Up and Getting Started

To turn off your notebook:

Click (Start), click the arrow next to the lock icon, then
click Shut Down. The notebook turns off.
Important
If for some reason you cannot use the Shut Down option in
Windows to turn off your notebook, press and hold the power button for
about five seconds, then release it.

Restarting (rebooting) your

notebook
If your notebook does not respond to keyboard, touchpad, or
mouse input, you may have to close programs that are not
responding. If closing unresponsive programs does not restore
your notebook to normal operation, you may have to restart
(reboot) your notebook.
To close unresponsive programs on your notebook:

1 Press CTRL+ALT+DEL.
2 Click Start Task Manager. The Windows Task Manager
dialog box opens.

3 Click the program that is not responding.

4 Click End Task.
5 Click X in the top-right corner of the Windows Task
Manager dialog box.
To restart your notebook:
Click (Start), click the arrow next to the lock icon, then
click Restart. The notebook turns off, then turns on
again.
Important
If your notebook does not turn off immediately, complete the
following steps until the notebook turns off:
1. Press and hold the power button for about five seconds, then release it.
2. Unplug the power cord and remove the battery for more than 10
seconds.

24

www.gateway.com

Using the status indicators

Important
If none of the indicators are on, you may need to press FN+F1 to toggle
the status indicators on.

Status indicators inform you when a drive is being used or

when a button has been pressed that affects how the keyboard
is used. The status indicators are located below the touchpad.

Wireless network

Hard drive

DVD drive

Caps lock

Num lock

Indicator

Icon

Wireless
network

Description

Caps lock

A
Num lock

DVD drive

Hard drive

LED on - Optional wireless IEEE

802.11 radio is turned on.
LED off - Optional wireless IEEE
802.11 radio is turned off.
LED on - Caps lock is turned on.
LED off - Caps lock is turned off.
LED on - Numeric keypad is turned
on.
LED off - Numeric keypad is turned
off.
LED on - Drive is in use.
LED off - Drive is not in use.
LED blinking - Hard drive is being
accessed.
LED off - Hard drive is not being
accessed.

25

CHAPTER 3: Setting Up and Getting Started

Using the keyboard

Your notebook features a full-size keyboard that functions the
same as a desktop computer keyboard. Many of the keys have
been assigned alternate functions, including shortcut keys for
Windows, function keys for specific system operations, and the
Num Lock keys for the numeric keypad.

Function keys/
System keys
Navigation
keys

Numeric keypad

Windows key
FN key

Application key Arrow keys

Tip
You can attach an external keyboard to the notebook using a USB port. You
do not need to shut down the notebook to connect a USB keyboard.

26

www.gateway.com

Key types
The keyboard has several different types of keys. Some keys
perform specific actions when pressed alone and other actions
when pressed in combination with another key.

Key type

Icon

Description

Numeric keypad

Use these keys to type numbers

when the numeric keypad is turned
on. Press FN+ 1 to turn on the
numeric keypad.

Function keys

Press these keys labeled F1 to F12

to perform actions in programs. For
example, pressing F1 may open
help.
Each program uses different
function keys for different
purposes. See the program
documentation to find out more
about the function key actions.

System keys

Press these colored keys in

combination with the FN key to
perform specific actions. For more
information, see System key
combinations on page 28.

Navigation keys

Press these keys to move the cursor

to the beginning of a line, to the
end of a line, up the page, down the
page, to the beginning of a
document, or to the end of a
document.

FN key

Press the FN key in combination

with a colored system key to
perform a specific action.

Windows key

Press this key to open the Windows

Start menu. This key can also be
used in combination with other
keys to open utilities like F (Search
utility), R (Run utility), and
E (Computer window).

Application key

Press this key for quick access to

shortcut menus and help assistants
in Windows.

Arrow keys

Press these keys to move the cursor

up, down, right, or left.

27

CHAPTER 3: Setting Up and Getting Started

System key combinations

When you press the FN key and a system key at the same time,
your notebook performs the action identified by the text or
icon on the key.

Press and hold

FN, then press
this system key...

To...

Toggle the status indicators on or off. For

more information, see Using the status
indicators on page 25.
Turn the optional IEEE 802.11 wireless
network radio on or off. For more
information, see Wireless Ethernet
Networking in your online User Guide.
Warning: Radio frequency wireless
communication can interfere with
equipment on commercial aircraft. Current
aviation regulations require wireless devices
to be turned off while traveling in an
airplane. IEEE 802.11 communication devices
are examples of devices that provide
wireless communication.
Important: The wireless network switch
must be in the ON position for this button to
work. For more information, see Left on
page 7.
Enter Sleep mode or Hybrid Sleep mode.
Press the power button to leave Sleep mode.
For more information, see Changing
notebook power settings on page 72.
Toggle the notebook display in the following
order:

The LCD

An external monitor or projector (a

monitor or projector must be plugged
into the monitor port or HDMI port on
your notebook)

Both displays at the same time

For more information, see Viewing the
display on a projector, monitor, or television
on page 59.

28

www.gateway.com

Press and hold

FN, then press
this system key...

F8
-+

To...

Turn the optional Bluetooth radio on or off.

Warning: Radio frequency wireless
communication can interfere with
equipment on commercial aircraft. Current
aviation regulations require wireless devices
to be turned off while traveling in an
airplane. Bluetooth communication devices
are examples of devices that provide
wireless communication.
Important: The wireless network switch
must be in the ON position for this button to
work. For more information, see Left on
page 7.
Increase the LCD panel brightness above the
normal brightest setting. Use this feature in
bright lighting situations, such as outside in
bright sunlight.
Press a second time to decrease the
brightness below the normal lowest
brightness setting. Use this feature in dim
lighting situations.
Press a third time to return the display to the
normal brightness setting.
Important: Using this feature will affect
battery performance.
Play or pause the CD or DVD.

Stop playing the CD or DVD.

Skip back one CD track or DVD chapter.

Skip ahead one CD track or DVD chapter.

29

CHAPTER 3: Setting Up and Getting Started

Press and hold

FN, then press
this system key...

To...

Increase the brightness of the display.

Decrease the brightness of the display.

Increase volume. For more information, see

Adjusting the volume on page 45.

Decrease volume. For more information, see

Adjusting the volume on page 45.

Mute the sound. Press the key combination

again to restore the sound. For more
information, see Adjusting the volume on
page 45.

30

www.gateway.com

Using the optional fingerprint

reader
Your notebook may include a fingerprint reader that provides
enhanced security and convenience. The fingerprint reader is
located between the left and right touchpad buttons.

Features include:
Secure logon to Windows and fast user switching
between user accounts
Password bank feature which records and replays
passwords used in Windows and Web-based
applications
Launch an application based on which finger you swipe
A safe or folder for storing encrypted files that only a
user with a matching fingerprint can access
Boot level security that requires a fingerprint
authentication before the system will boot to Windows
Scrolling so you can use the fingerprint reader in place
of the touchpad

Running the TouchStrip Tutorial

Before using the fingerprint reader the first time, you should
run the TouchStrip Tutorial which teaches you the correct
method to use the fingerprint reader.
To run the TouchStrip Tutorial:
(Start), All Programs, Protector Suite QL, then
click Fingerprint Tutorial.

1 Click

2 Click Next to proceed through the tutorial.

31

CHAPTER 3: Setting Up and Getting Started

Enrolling your fingerprints

Before you can use the features of the fingerprint reader, you
must enroll your fingerprints so your notebook can identify
you.
To enroll your fingerprints:
1 Click (Start), All Programs, Protector Suite QL, then
click User Enrollment. The Welcome screen opens.

2 Click Next. The Finish screen opens.

3 Select one of the following options, then click Next.
Enrollment to the biometric deviceSelect this

option to save your fingerprint to memory in the

fingerprint reader. Use this option to prevent
unauthorized use of your notebook even if the hard
drive has been removed.
Enrollment to the hard diskSelect this option to
save your fingerprint to the hard drive. If you plan to
enroll more than 21 fingerprints, you must select this
option.

The User Enrollment wizard opens.

32

www.gateway.com

4 If you want to run the TouchStrip Tutorial, leave the Run

interactive tutorial check box selected, then click Next.
The TouchStrip Tutorial runs. After you have completed
the tutorial, the Enrollment screen appears.
-ORIf you do not want to run the TouchStrip Tutorial, click to
uncheck the Run interactive tutorial check box, then
click Next. The Enrollment screen appears.

5 Click the button above the finger you are enrolling. A

new box appears with three empty circles in it.

33

CHAPTER 3: Setting Up and Getting Started

6 Swipe your finger. A sample will be created and is

indicated by a fingerprint icon in one of the circles.

7 Repeat 6 two more times, then click Next. The Advanced

Security screen appears.

8 Type a password in the Backup password box, type the

same password in the Retype password box, then click
Next.

9 Click Finish.

Using the Fingerprint Control Center

The Fingerprint Control Center lets the administrator of the
notebook control how the fingerprint reader is used. You can:
Add new fingerprints to the database
Edit or delete fingerprints from the database
Modify how fingerprints are used for logging onto the
notebook
Modify how the fingerprint reader is used for scrolling

34

www.gateway.com

To use the Fingerprint Control Center:

1 Click (Start), All Programs, Protector Suite QL, then
click Control Center. The Fingerprint Control Center
opens.

2 If you are logged into the notebook with administrator

privileges, click Elevate administrative privileges for
user so you can make changes to the settings.

3 Click the yellow arrow in front of an option, then click the

option or setting you want to change.

Using the password bank

The password bank stores registrations to your favorite secure
Web sites so that you can access them without having to
re-enter your username and password each time you want to
log into the site.
Tip
The password bank also works with many computer programs that
require entering a username and password.

To create a registration for a Web site:

1 Go to the Web site using your Internet browser.

2 Log in using your username and password.

35

CHAPTER 3: Setting Up and Getting Started

3 Swipe your already enrolled finger over the sensor. The

fingerprint reader menu opens.

4 Click Register.
5 Click on the dialog box or Web site sign in box.
To log on to a registered Web site:
1 Swipe your already enrolled finger over the sensor. The
fingerprint reader menu opens.

2 Click Registered Sites, then click the Web site you want
to log onto.

3 Your Internet browser opens and automatically logs you

onto the Web site.

Using the fingerprint reader features

For more information about the fingerprint reader and how to
use its features, click
(Start), All Programs, Protector Suite
QL, then click Help.

36

www.gateway.com

Using the EZ Pad touchpad

The EZ Pad consists of a touchpad, two buttons, and a scroll
zone.

Scroll zone
Touchpad

Left button
Right button

When you move your finger on the touchpad, the pointer

(arrow) on the screen moves in the same direction. You can use
the scroll zone to scroll through documents. Use of the scroll
zone may vary from program to program.

37

CHAPTER 3: Setting Up and Getting Started

You can use the EZ-Pad left and right buttons below the
touchpad to select objects.
Tip
You can attach a mouse to the notebook using a USB port. You do not need
to shut down the notebook to connect a USB mouse.

Tip
For instructions on how to adjust the double-click speed, pointer speed,
right-hand or left-hand configuration, and other touchpad settings, see
Changing the mouse, touchpad, or pointing device settings in your online User
Guide.

Tip
You may have received your notebook with the EZ Pad touchpad set to
only accept clicking by using the touchpad buttons. You can change this feature
to allow tapping on the touchpad to simulate clicking the left button. For more
information, see Changing the mouse, touchpad, or pointing device settings in
your online User Guide.

To...

Do this...

Move the
pointer on the
screen.

Move your finger

around on the
touchpad. If you
run out of space
and need to move
the pointer
farther, lift your
finger, move it to
the middle of the
touchpad, then
continue moving
your finger.

Select an
object on the
screen.

Position the
pointer over the
object. Quickly
press and release
the left button
once. This action
is called clicking.

Start a
program or
open a file or
folder.

Position the
pointer over the
object. Press the
left button twice
in rapid
succession. This
action is called
double-clicking.

38

www.gateway.com

To...

Do this...

Access a
shortcut
menu or find
more
information
about an
object on the
screen.

Position the
pointer over the
object. Quickly
press and release
the right button
once. This action
is called
right-clicking.

Move an
object on the
screen.

Position the
pointer over the
object. Press the
left button and
hold it down, then
use the touchpad
to move (drag) the
object to the
appropriate part
of the screen.
Release the
button to drop the
object where you
want it.

39

CHAPTER 3: Setting Up and Getting Started

Using the optional multimedia

panel
Capacitive volume control
Windows Hotstart
Mute sound
Instant On Audio
Skip ahead
Instant On Video

Skip back

Play/Pause
Stop

Button

Description
Windows HotstartTurns on the notebook (if turned off) and
open Media Center (Windows Vista Home Premium or
Windows Vista Ultimate) or Windows Media Player (Windows
Vista Home Basic).
Important: You can use this button if the notebook is turned
on, turned off, or in Sleep or Hibernate mode.
Important: You cannot use this button if you are logged on
as a guest.
Instant on AudioOpens Media Center (Windows Vista Home
Premium or Windows Vista Ultimate) or Windows Media
Player (Windows Vista Home Basic).
Instant on VideoOpens Media Center (Windows Vista Home
Premium or Windows Vista Ultimate) or the DVD player
program (Windows Vista Home Basic).
Play or pause the CD or DVD.
Stop playing the CD or DVD.
Skip back one CD track or DVD chapter.
Skip ahead one CD track or DVD chapter.

40

www.gateway.com

Button

Description
Mute the sound. Press again to restore the sound. For more
information, see Adjusting the volume on page 45.
Capacitive volume controlSwipe your finger on the volume
sensor strip to change the volume. To increase volume, move
from the towards the +. To decrease volume, move from
the + towards the .
Tip:

You can start swiping at any point on the strip.

The duration of the swipe determines the amount of the

change.

At the end of this swipe, if you keep your finger on the

strip, the volume control continues to change in the same
direction.

Tapping on the strip does not change the volume.

Using the optional webcam

You can use the optional webcam with many of the available
Internet chat programs to add video and audio to your chat
session. In addition, by using the software included with the
webcam, you can take pictures or create video clips.
Webcam
Microphone

Status indicator

41

CHAPTER 3: Setting Up and Getting Started

To use the webcam:

1 Click (Start), All Programs, Camera Assistant
Software, then click Camera Assistant Software. The
Camera Assistant Toolbar opens.
-ORRight-click
(Camera assistant software) on the
taskbar, then click Show Toolbar. The Camera Assistant
Toolbar opens.

Button

Icon

Description

Start
camera

Turns on the camera and opens

the preview screen.

Effects

Adds a decoration or border to

your picture.

Properties

Modifies properties such as

zoom, backlight compensation,
brightness, and contrast.

Settings

Selects the position of the toolbar

or modifies the picture, video, or
audio settings.

Help

Opens online help.

Important
If you do not see the toolbar, the Auto Hide setting may be turned
on. Move your pointer around the outside of the screen until the toolbar
appears.

42

www.gateway.com

2 Click

(Start camera). The Camera Assistant opens.

3 Click one of the following:

Button

Icon

Description

Snapshot

Take a picture of what is

currently in the preview
screen.

Video
recording

Create a video recording.

Audio
recording

Create an audio recording.

Functions

Change a setting or access

online help.

Resolution

Change the size of the

picture.

Mute

Turn audio capture on or

off.

Effects

Add a decoration or
border to your picture.

43

CHAPTER 3: Setting Up and Getting Started

Tip
For more information about using the webcam, click
in the
Camera Assistant Toolbar or click
(Functions), then click Help in the
Camera Assistant.

Tip
For more information about using the webcam while using an
Internet chat service, see the help for that service.

Adjusting the brightness

To adjust screen brightness:
Use the increase brightness and decrease brightness
keys on the keyboard. For more information, see System
key combinations on page 28.
-ORClick
(Start), All Programs, Accessories, then click
Windows Mobility Center. The Windows Mobility
Center window opens. Slide the Brightness control to
the desired screen brightness.
Tip
For more information about the Windows Mobility Center, see
Using the Windows Mobility Center in your online User Guide.

44

www.gateway.com

Adjusting the volume

You can use the volume control to adjust the overall volume
of your notebook.
To adjust the overall volume level using hardware
controls:
If you are using external speakers, turn the knob on the
front of the speakers.
-ORUse the mute and volume control buttons on the
keyboard. For more information, see System key
combinations on page 28.
-ORUse the mute button and capacitive volume control on
the optional multimedia panel. For more information,
see Using the optional multimedia panel on page 40.
-ORClick
(Start), All Programs, Accessories, then click
Windows Mobility Center. The Windows Mobility
Center window opens. Slide the Volume control to the
desired volume level.
Tip
For more information about the Windows Mobility Center, see
Using the Windows Mobility Center in your online User Guide.

To adjust the volume from Windows:

(Volume) on the taskbar. The volume control
slider opens.

1 Click

2 Click and drag the slider up to increase volume and down

to decrease volume.

45

CHAPTER 3: Setting Up and Getting Started

3 To mute the volume, click

(Mute). To restore volume,

click it again.

4 To adjust device volume levels, click Mixer. The Volume

Mixer dialog box opens, where you can click and drag
sliders for individual devices.

Tip
Adjust the Windows Sounds slider to change system sounds
volume independently of general volume (such as the volume used for
music and game sounds).

5 Click X in the top-right corner of the window to close it.

46

www.gateway.com

Turning your wireless radio on

or off
Your Gateway notebook may have a factory-installed wireless
radio.
Warning
Radio frequency wireless communication can interfere with equipment on
commercial aircraft. Current aviation regulations require wireless devices to be
turned off while traveling in an airplane. IEEE 802.11 and Bluetooth
communication devices are examples of devices that provide wireless
communication.

Warning
In environments where the risk of interference to other devices or services
is harmful or perceived as harmful, the option to use a wireless device may be
restricted or eliminated. Airports, hospitals, and oxygen or flammable gas laden
atmospheres are limited examples where use of wireless devices may be
restricted or eliminated. When in environments where you are uncertain of the
sanction to use wireless devices, ask the applicable authority for authorization
prior to using or turning on the wireless device.

IEEE 802.11 wireless network radio

Your notebook has an IEEE 802.11 radio for accessing the
Internet through a wireless access point or communicating
with other computers on a wireless Ethernet network.
To turn the wireless IEEE 802.11 radio on:
1 Enable the wireless IEEE 802.11 radio by sliding the
wireless network switch backward to the ON position.
For the location of the wireless network switch, see Left
on page 7.

47

CHAPTER 3: Setting Up and Getting Started

2 If the wireless IEEE 802.11 radio does not turn on

automatically, press FN + F2. The wireless status
indicator turns on. For the location of the wireless status
indicator, see Using the status indicators on page 25.
-ORClick
(Start), All Programs, Accessories, then click
Windows Mobility Center. When the Windows Mobility
Center window opens, click Turn wireless on.
To turn the wireless IEEE 802.11 radio off:
Press FN + F2. The wireless status indicator turns off. For
the location of the wireless status indicator, see Using
the status indicators on page 25.
-ORClick
(Start), All Programs, Accessories, then click
Windows Mobility Center. When the Windows Mobility
Center window opens, click Turn wireless off.
Tip
For more information about using your notebook on a wireless network,
see Wireless Ethernet Networking in your online User Guide

Disabling the wireless IEEE 802.11 radio

You should disable the wireless IEEE 802.11 radio while
traveling by airplane to prevent it from being accidently turned
on while in flight.
To disable the wireless IEEE 802.11 radio:
Slide the wireless network switch forward to the OFF
position to disable both IEEE 802.11 and Bluetooth. For
the location of the wireless network switch, see Left on
page 7.

48

www.gateway.com

Bluetooth radio
Your notebook may have a Bluetooth radio for communicating
with another Bluetooth device, such as a printer, scanner,
camera, MP3 player, headphone, keyboard, or mouse.
To turn the Bluetooth radio on:
1 Enable the Bluetooth radio by sliding the wireless
network switch backward to the ON position. For the
location of the wireless network switch, see Left on
page 7.

2 If the Bluetooth radio does not turn on automatically,

press FN + F6.
To turn the Bluetooth radio off:
Press FN + F6.
Tip
For more information about using your notebook on a Bluetooth Personal
Area Network, see Bluetooth Networking in your online User Guide

Help
For more information about Bluetooth, click Start, then click Help and
Support. Type the keyword Bluetooth in the Search Help box, then press
ENTER.

49

CHAPTER 3: Setting Up and Getting Started

Disabling the Bluetooth radio

You should disable the Bluetooth radio while traveling by
airplane to prevent it from being accidently turned on while in
flight.
To disable the Bluetooth radio:
Slide the wireless network switch forward to the OFF
position to disable both IEEE 802.11 and Bluetooth. For
the location of the wireless network switch, seeLeft on
page 7.

50

CHAPTER4
Using Drives and Accessories

Using the DVD drive

Using the memory card reader
Adding and removing an Express Card
Installing a printer or other peripheral device
Viewing the display on a projector, monitor,
or television
Ordering accessories

51

CHAPTER 4: Using Drives and Accessories

Using the DVD drive

You can use your notebook to enjoy a wide variety of
multimedia features.

Identifying drive types

Your Gateway notebook may contain one of the following drive
types. Look on the front of the drive for one or more of the
following logos:

If your drive has this

logo...

ROM/R/RW

52

This is your drive

type...

Use your drive for...

DVD drive

Installing programs, playing

audio CDs, playing DVDs, and
accessing data. You cannot
use this drive to create CDs or
DVDs.

Combination
DVD/CD-RW drive

Installing programs, playing

audio CDs, playing DVDs,
accessing data, and recording
music and data to recordable
CDs. You cannot use this drive
to create DVDs.

Multi-format
double layer
DVDRW drive

Installing programs, playing

audio CDs, playing DVDs,
accessing data, recording
music and data to CD-R or
CD-RW discs, and recording
video and data to DVD-R,
DVD+R, DVD-RW, DVD+RW, or
double layer DVD+R or DVD-R
discs.
Note: To use the double layer
capability of the double layer
recordable DVD drive, the
blank DVDs you purchase must
state Double Layer, Dual Layer,
or DL. Using other types of
blank media will result in less
capacity.

HD DVD drive

Installing programs, playing

audio CDs, playing DVDs and
HD-DVDs, accessing data, and
recording video and data to
CDs, DVD-RAM, DVD-R,
DVD-RW, and HD-DVD discs.

www.gateway.com

Using a DVD drive

Important
Prerecorded DVD discs and DVD drives contain regional codes that help
control DVD title exports and help reduce illegal disc distribution. To be able to
play a prerecorded DVD, the discs regional code and your DVD drives regional
code must match.
The regional code on your DVD drive is determined by your notebooks delivery
address. The regional code for the United States and Canada is 1. The regional
code for Mexico is 4. Your DVD drives regional code must match the regional code
of the disc. The regional code for the disc is on the disc, disc documentation, or
packaging.

Important
When you place a single-sided disc in the tray or slot, make sure that the
label side is facing up. If the disc has two playable sides, place the disc so the
name of the side you want to play is facing up.

Tip
For information about cleaning a CD or DVD, see Cleaning CDs or DVDs
on page 87.

Using a tray-load DVD drive

[

Manual eject hole

Eject button

To insert a CD or DVD:

1 Press the eject button on the DVD drive. After the tray
opens slightly, pull the disc tray completely open.

2 Place the disc in the tray with the label facing up, then
press down carefully on the disc until it snaps into place.

3 Push the tray in until it is closed.

53

CHAPTER 4: Using Drives and Accessories

To remove a CD or DVD:
1 Press the eject button on the DVD drive. After the tray
opens slightly, pull the disc tray completely open.

2 Carefully lift on the edges of the disc until it snaps off

of the spindle.

3 Push the tray in until it is closed.

Tip
Your notebook must be turned on to remove CDs and DVDs using this
method. If you do not want to turn on your notebook, manually eject the disc
by inserting an opened paper clip into the manual eject hole.

Using a slot-load DVD drive

[

Eject button

Manual eject hole

To insert a CD or DVD:
1 Place the disc in the slot with the label facing up.

2 Gently push the disc into the notebook until the

mechanism draws it in.

54

www.gateway.com

To remove a CD or DVD:
Press the eject button on the DVD drive. The drive
mechanism pushes the CD or DVD out of the notebook.
Tip
Your notebook must be turned on to remove CDs and DVDs using this
method. If you do not want to turn on your notebook, manually eject the disc
by inserting an opened paper clip into the manual eject hole.

Using the memory card reader

You can use memory cards to transfer pictures from a digital
camera to your notebook. You can also use the memory card
reader to transfer data between your notebook and a device
that uses memory cards, such as a PDA, MP3 player, or cellular
telephone.

Memory card types

The memory card reader supports Memory Stick, Memory
Stick Pro, MultiMediaCard, Secure Digital, Mini Secure
Digital, RS-MultiMediaCard, and xD-Picture Card.
Important
RS-Multimedia Card and Mini Secure Digital cards require the use of an
adapter that is available with the media.

55

CHAPTER 4: Using Drives and Accessories

Inserting a memory card

To insert a memory card:
Insert the memory card into the memory card slot with
the label facing up and the arrow on the label pointing
towards the notebook.

Using a memory card

To access a file on a memory card:

1 Click (Start), then click Computer.

2 Double-click the drive letter (for example, the E: drive),
then double-click the file name.

Removing a memory card

Important
Do not use the remove hardware
icon in the taskbar to remove the
memory card. If you use the remove hardware icon, your notebook may not
recognize your memory card reader until you restart your notebook.

To remove a memory card:

1 Push the memory card into the notebook. The memory

card pops out slightly.

2 Pull the memory card out of the notebook.

56

www.gateway.com

Adding and removing an

Express Card
Your notebook has an Express Card slot. This slot accepts one
Type 54 Express Card. You do not need to restart your notebook
when changing most cards because your notebook supports
hot-swapping. Hot-swapping means that you can insert an
Express Card while your notebook is running. If your Express
Card does not work after hot-swapping, see the Express Card
manufacturers documentation for further information.
To insert an Express Card:
Push the card firmly into the Express Card slot, label-side
up, until the outer edge of the card is flush with the side
of your notebook.

To remove an Express Card:

1 Turn off your notebook, then go to 5.
-ORDouble-click the remove hardware
icon in the
taskbar. The Safely Remove Hardware dialog box opens.
Important
If the remove hardware icon does not appear on the taskbar, click
the show hidden icons button.

2 Click the Express Card name, then click Stop. The Stop a
Hardware device dialog box opens.

3 Click the Express Card name, then click OK. The Safe to
Remove Hardware dialog box opens.

4 Click OK.
5 Pull the Express Card out of your notebook.

57

CHAPTER 4: Using Drives and Accessories

Installing a printer or other

peripheral device
Your notebook has one or more of the following ports:
Universal Serial Bus (USB) and HDMI (digital audio/video). You
use these ports to connect peripheral devices such as printers,
scanners, and digital cameras to your notebook.
Important
Before you install a printer, scanner, or other peripheral device, see the
device documentation and installation instructions.

USB ports support plug-and-play and hot swapping, which

means that your notebook will usually recognize such a device
whenever you plug it into the appropriate port. When you use
a USB device for the first time, your notebook will prompt you
to install any software the device needs. After doing this, you
can disconnect and reconnect the device at any time.
Help
For more information about installing peripheral devices, click Start, then
click Help and Support. Type the keyword installing devices in the Search
Help box, then press ENTER.

Connecting a USB device

Your notebook has USB ports for connecting devices such as a
diskette drive, flash drive, printer, scanner, camera, keyboard,
or mouse.
Important
USB devices may have special installation instructions. See your USB
devices installation guide.

Important
For more information about using the USB port on your device, see your
devices documentation.

58

www.gateway.com

To connect your USB device to your notebook:

1 Connect one end of the USB cable to your device.

2 Connect the other end of the cable to a USB port

on

your notebook.

Viewing the display on a

projector, monitor, or television
You can use your notebook for giving presentations by
connecting an external monitor, projector, or television to your
monitor (VGA) or optional HDMI port. Your notebook supports
simultaneous LCD and external display. Simultaneous display
lets you control a presentation from your notebook at the same
time as you face your audience.
To use a projector, monitor, or television:
1 Turn off your notebook.

2 If you are using the VGA port, connect one end of the VGA
cable to the monitor, projector, or television.
-ORIf you are using the HDMI port, connect one end of the
HDMI cable to the monitor, projector, or television.

59

CHAPTER 4: Using Drives and Accessories

3 Plug the other end of the VGA cable into the monitor
port

on your notebook.

-ORPlug the other end of the HDMI cable into the optional
HDMI port on your notebook.

4 Turn on your notebook.

5 Plug the projectors, monitors, or televisions power cord
into an AC power source and turn it on.
Windows recognizes the new hardware and the New
Display Detected dialog box opens.

6 Select the options for the projector, monitor, or

television, then click OK.

60

www.gateway.com

7 Press FN+F4 to switch between viewing the display on

the LCD panel, viewing the display on the projector,
monitor, or television, and viewing the display on both
the LCD panel and the projector, monitor, or television.
Important
If a monitor, projector, or television is connected and you close the
LCD panel, your notebook may turn off the LCD panel, but will not enter
Sleep mode.

Adjusting the display properties

If the image on the projector, monitor, or television does not
appear correctly, or if you want to use the display as an
extension of your notebook desktop, you should adjust the
display properties.
To adjust the display properties on a projector, monitor,
or television:
1 Click (Start), All Programs, Accessories, then click
Windows Mobility Center. The Windows Mobility
Center window opens.
Tip
For more information about the Windows Mobility Center, see
Using the Windows Mobility Center in your online User Guide.

2 Click

(Change display settings). The Display

Settings dialog box opens.

61

CHAPTER 4: Using Drives and Accessories

3 Click monitor 2.
4 Adjust properties such as Resolution or Colors if
necessary.

5 To use the monitor, projector, or television as a mirror

(duplicate) of the notebook display (both displays have
the same content), click to deselect the check box for
Extend my Windows desktop onto this monitor.

6 To use the monitor, projector, or television as an

extension of your desktop (increasing the size of your
Windows desktop), click to select the check box for
Extend my Windows desktop onto this monitor. You
can click and drag the 2 monitor icon to position it the
same way the physical monitor is arranged on your desk.

7 Click OK.

Using the projector or monitor for a

presentation
You can configure your notebook so the settings are correct
each time you give a presentation.
To use a projector, monitor, or television for a
presentation:
1 Click (Start), All Programs, Accessories, then click
Windows Mobility Center. The Windows Mobility
Center window opens.
Tip
For more information about the Windows Mobility Center, see
Using the Windows Mobility Center in your online User Guide.

62

www.gateway.com

2 Click

(Change presentation settings). The

Presentation Settings dialog box opens.

3 Adjust properties such as Turn off screen saver and Set

the volume to if necessary.

4 Click OK.
5 Click Turn on to turn on the presentation settings. When
you are finished giving the presentation, click Turn off
to return to your standard notebook settings.

Ordering accessories
To order accessories, visit www.gateway.com. Accessories may
not be available in all localities.
Automobile/airplane power adapters
With an automobile/airplane power adapter, you can save
battery power by plugging your notebook into an automobile
cigarette lighter or an airplane in-flight power receptacle.

63

CHAPTER 4: Using Drives and Accessories

Batteries
If you run your notebook on battery power for extended
periods, you may want to buy an additional battery so you can
swap batteries when necessary. See Changing batteries on
page 67 for more information about using an additional
battery.
Carrying cases
Gateway has large-capacity carrying cases if you need
additional space for accessories or supplies.
Hard drives
If you want to increase your internal storage space, try
replacing your existing hard drive with a larger drive. See
Replacing the hard drive kit on page 107 for more
information.
Memory
Large programs, such as multimedia games or graphics
programs, use a lot of memory. If your programs are running
more slowly than you think they should, try adding more
memory. See Adding or replacing memory modules on
page 103 for more information.
Printers
You can attach almost any type of printer to your notebook.
The most common types are inkjet and laser printers, which
print in color or black and white.
Inkjet printers and cartridges are relatively inexpensive, but
they are slower than laser printers. Using an inkjet color
printer, you can print pictures, banners, and greeting cards, as
well as documents.
Laser printers and cartridges are more expensive, but they
print much faster than inkjet printers. Laser printers are better
than inkjet printers when you are printing large documents.
USB flash drive
Use a USB flash drive for storing files or transferring files to
another computer.

64

CHAPTER5
Managing Power

Monitoring the battery charge

Recharging the battery
Recalibrating the battery
Extending battery life
Changing notebook power settings

65

CHAPTER 5: Managing Power

Monitoring the battery charge

Your new Gateway notebook is designed to provide an
exceptional balance of performance and portability. Your
notebook uses the latest chipset and mobile processor
technologies to manage the processor speed and power
consumption for a greater battery life experience. This design
provides you with maximum performance when plugged into
AC power balanced with optimized battery life when on
battery power.
Closely monitor the battery charge. When the battery charge
gets low, change the battery or connect to AC power
immediately to prevent losing any unsaved work. To monitor
the battery charge:
Move the mouse pointer over the power cord icon
or battery icon in the taskbar. A message appears
showing the remaining battery time and the current
power plan.
Wait for a Low Battery warning message to appear.
Look at the battery charge status indicator.
If your battery charge indicator displays what looks like
an inaccurate charge, you may need to recalibrate the
battery.
Tip
For more information about the battery charge status indicator,
see Front on page 6.

Tip
For more information about recalibrating the battery, see
Recalibrating the battery on page 68.

Recharging the battery

The battery recharges while it is installed and your notebook
is connected to AC power. While the battery recharges, the
battery charge indicator turns on.

66

www.gateway.com

Changing batteries
Warning
Danger of explosion if battery is incorrectly replaced.
Replace only with a battery specifically manufactured for your Gateway notebook.
Discard used batteries according to local hazardous material regulations.
The batteries used in this device may present a fire or chemical burn hazard if
mishandled. Do not disassemble, heat above 212F (100C), or incinerate. Dispose
of used batteries promptly. Keep away from children.

Caution
If your notebook is connected to AC power you can change the battery
while the notebook is turned on. If your notebook it is not plugged into an AC
outlet, you must turn the notebook off while changing the battery.

To replace the battery:

1 If your notebook is on and is connected to AC power, go
to 2.
-ORIf your notebook is on and is not plugged into an AC
outlet, save your work and turn off the notebook.

2 Turn your notebook over so the bottom is facing up.

3 Slide the battery lock to the unlocked position, then slide
the battery release latch.

4 Slide the battery out of the notebook.

5 Slide a recharged battery into the notebook until it snaps

into place.

6 Slide the battery lock to the locked position.

67

CHAPTER 5: Managing Power

7 Turn your notebook over.

8 Open the LCD panel.

Recalibrating the battery

Important
Do not interrupt the battery recalibration process. If recalibration is
interrupted, you must start the process over again.

If your notebook unexpectedly goes into Sleep mode while you

are using it but the battery charge is not low, you may need
to recalibrate your battery. You should also recalibrate the
battery periodically to maintain the accuracy of the battery
gauge.
Important
Select models have the Battery Auto Learning utility programmed into the
BIOS. If your notebook does not have this utility in BIOS, use the non-BIOS
procedure.

To recalibrate the battery using BIOS:

1 Connect the AC adapter, then turn on your notebook.

2 As soon as your notebook starts and you see a startup

screen, press F2. The BIOS Setup utility opens.

3 Open the Advanced menu.

4 Highlight Battery Auto Learning, then select Enabled
by pressing the spacebar.

5 Open the Exit menu, highlight Exit Saving Changes,

then press ENTER.

6 Select Yes, then press ENTER.

The battery recalibration process begins and a screen
opens showing you the progress. The entire process
takes several hours.
When the recalibration has finished, the message Press
[Esc] key to exit appears.

7 Press ESC. The battery charge indicator now displays an

accurate battery charge.
To recalibrate the battery without using BIOS:
1 Connect your notebook to AC power and let the battery
charge completely.

2 Disconnect the AC power and restart your notebook.

68

www.gateway.com

3 Completely discharge the battery.

4 After the battery is completely drained, reconnect your
notebook to AC power.

5 Charge the battery completely until the battery status

indicator turns blue.
Important
If, after completing this procedure, the battery charge indicator still does
not show an accurate charge, contact Gateway Customer Care at the location
shown on the Customer Care label. For more information, see Gateway contact
information on page 2.

Extending battery life

Maximizing battery performance
To get maximum performance from your notebook battery, we
recommend that you initially condition (fully charge and
discharge) your new battery a few times during the first
several weeks of use, to let it reach its maximum rated capacity.
Over the long term, use the battery at least once a month, even
if it was kept in a cool, dry place for storage, but avoid frequent
full discharges because this puts additional strain on the
battery. Several partial discharges with frequent recharges are
better for a lithium-ion battery than one complete discharge,
and recharging a partially charged lithium-ion battery does not
cause harm because there is no memory.

Conserving battery power

To conserve power while using the battery to power your
notebook:
Turn off wireless networking and Bluetooth.
Dim the display as low as is comfortable.
Disconnect all external devices, like USB devices.
Remove Express Cards when you do not need them.
Many Express Cards use a small amount of power while
inserted, even if they are not being used.

69

CHAPTER 5: Managing Power

Select the Power saver power plan to get maximum

power savings.
Tip
For more information about using power plans, see Changing
notebook power settings on page 72.

Close the LCD panel to turn off the display while you are

not using your notebook. The display stays off until you
open the panel again.
Use Hibernate mode for maximum power savings while
your notebook is not in use.
Use the notebook touchpad instead of an external
mouse.
Decrease or mute speaker volume.
Turn off all scheduled tasks.
Turn off auto-save features in Microsoft Office and other
applications.
Copy programs from CDs or DVDs to the hard drive so
you do not use battery power by running optical drives.
Use the DVD drive only when necessary. This drive uses
a large amount of power.
Recharge the battery often, take an extra battery, and
fully recharge the batteries before traveling. For more
information, see Recharging the battery on page 66.
Tip
For more information about traveling with your notebook, see
Traveling with Your Notebook on page 77.

Using alternate power sources

To extend battery life, use alternate power sources whenever
possible.
If traveling internationally, take electrical adapters. Save
the battery for times when you cannot use a power
adapter. If you plan on taking your AC power adapter,
also take a single-plug surge protector.

If you will have access to an EmPower in-flight power

receptacle, an automobile power outlet, or an
automobile cigarette lighter, use an airplane/
automobile power adapter or power inverter. Save the
battery for times when you cannot use a power adapter.

To find AC power outlets in airports, look for them next

to support pillars, in large areas such as boarding gates,
and under banks of telephones.

70

www.gateway.com

Changing power modes

You can use the following power modes to lengthen the life of
your notebooks battery:
Sleep - while your notebook is in Sleep mode, it switches
to a low power state where devices, such as the display
and drives, turn off.

Hibernate - (also called save to disk) writes all current

memory (RAM) information to the hard drive, then turns

your notebook completely off. The next time you turn on
your notebook, it reads the memory information from
the hard drive and opens the programs and documents
that were open when you activated Hibernate mode.
Hybrid Sleep - while your notebook is in Hybrid Sleep
mode, it switches to a low power state where devices,
such as the display and drives, turn off similar to Sleep
mode. The notebook also writes all current memory
(RAM) information to the hard drive similar to Hibernate
mode. If your notebook experiences a power outage
while in Hybrid Sleep mode, the notebook reads the
memory information from the hard drive and opens the
programs and documents that were open when you
activated Hybrid Sleep mode. If the notebook does not
experience a power outage while in Hybrid Sleep mode,
it restarts using the information in current memory, thus
reducing startup time. You must turn on Hybrid Sleep
mode to use it. For more information, see Changing
advanced settings on page 74.

Using power saving modes

Always save your work before using Sleep mode. In Sleep
mode, your notebook reduces or turns off the power to most
devices except memory. However, the information in memory
is not saved to the hard drive. If power is interrupted, the
information is lost.

71

CHAPTER 5: Managing Power

When in Hibernate mode, your notebook saves all memory

information to the hard drive, then turns the power completely
off.

If your notebook
is...

...and you want

to...

...then

On

Enter Sleep or
Hybrid Sleep
mode

Press FN+F3.

On

Enter Hibernate
mode

Click
(Start), click
the arrow next to the
lock icon, then click
Hibernate.

In Sleep, Hybrid
Sleep, or Hibernate
mode

Exit Sleep, Hybrid

Sleep, or
Hibernate mode

Press the power

button.

Changing notebook power

settings
You can change the function of your notebooks power button,
Sleep system key, and power-saving timers by changing power
settings on your notebook.
You can customize power settings from the Windows Mobility
Center by selecting power plans and adjusting advanced
power settings.

Changing the power plan

Power plans (groups of power settings) let you change power
saving options such as when the display or hard drive is
automatically turned off. You can select one of the defined
power plans or create a custom power plan.
Three power plans are pre-defined for you:
Balanced - This is the default power plan which balances
performance and battery life.
Power saver - This power plan sacrifices performance in
order to extend battery life. Use this plan if you will be
away from AC power outlets for an extended period of
time. Your programs may run slower than you are
accustomed to under the other two power plans.

72

www.gateway.com

High performance - This power plan sacrifices battery life

in order to gain performance. Use this plan if you need
additional computing power for your program. Your
battery may not last as long as you are accustomed to
under the other two power plans.
To change the power plan:
1 Click (Start), All Programs, Accessories, then click
Windows Mobility Center. The Windows Mobility
Center window opens.

2 Click

(Change power settings). The Select a power

plan window opens.

3 Select the power plan you want to use.

- OR Click Change plan settings, modify the power plan you
selected, then click Save changes.
Help
For more information about changing the power plan, click Start,
then click Help and Support. Type the keyword power plan in the
Search Help box, then press ENTER.

73

CHAPTER 5: Managing Power

Changing advanced settings

Advanced power settings let you assign different power saving
modes to the power button and Sleep system key. You can also
select which power saving mode is activated when you close
the LCD panel.
To change advanced power management settings:
(Start), All Programs, Accessories, then click
Windows Mobility Center. The Windows Mobility
Center window opens.

1 Click
2 Click

(Change power settings). The Select a power

plan window opens.

3 Click a setting on the left side of the screen that you want
to change. The top three settings are not tied to a power
plan. The bottom three settings modify the currently
selected power plan.
Help
For more information about changing the power management
settings, click Start, then click Help and Support. Type the keyword
power management in the Search Help box, then press ENTER.

To turn on Hybrid Sleep mode:

1 On the Select a power plan window, click Change plan
settings for the plan you are using. The Change settings
for the plan window opens.

2 Click Change advanced power settings. The Power

Options dialog box opens.

74

www.gateway.com

3 Click the + in front of Sleep, then click the + in front of

Allow hybrid sleep.

4 Change the values to On for On battery and Plugged

in.
Help
For more information about hybrid sleep, click Start, then click
Help and Support. Type the keyword hybrid in the Search Help box,
then press ENTER.

75

CHAPTER 5: Managing Power

76

CHAPTER6
Traveling with Your Notebook

Packing your notebook

Traveling by air
Dial-up modem
Radio frequency wireless connections
Files
Security
Power
Additional tips

77

CHAPTER 6: Traveling with Your Notebook

Packing your notebook

Remove all discs, express cards, peripheral devices, and

cables. Remember to pack those you will need while

traveling.
Pack your notebook securely into a briefcase or
hand-carried luggage, and keep it separate from
toiletries, liquids, and food. Do not pack it in checked
luggage.
Keep your notebook stable during travel. Secure it to
prevent it from sliding around in overhead bins and car
trunks.

Traveling by air
Do not check your notebook as luggage.
Charge the battery in case airport security asks you to

start your notebook.

Have your notebook hand-inspected or sent through the
X-ray scanner, but never carry it through the metal
detector.
Turn off you notebook for takeoff and landing.
Turn off all wireless devices while in the aircraft.

Dial-up modem
Take a telephone cord to connect the modem to
telephone jacks. If you are traveling internationally, take
telephone jack adapters or an acoustic handset coupler.
Take a telephone line protector.

Take a telephone line tester to check for unsafe lines,

especially if you are traveling internationally.

Take remote access information with you so you can

connect to your ISP while outside of your usual calling
area. A list of country dialing codes may be especially
useful if you are traveling internationally.

78

www.gateway.com

Radio frequency wireless

connections
Important
If your notebook came equipped with an internal embedded wireless
device, see Legal Information on page 141 for general wireless regulatory
guidelines.

Every country has different restrictions on the use of

wireless devices. If your notebook is equipped with a

wireless device, check with the local radio approval
authorities prior to your trip for any restrictions on the
use of a wireless device in the destination country.
Wireless communication can interfere with equipment
on commercial aircraft. Current aviation regulations
require wireless devices to be turned off while traveling
in an airplane. IEEE 802.11 and Bluetooth communication
devices are examples of devices which use wireless to
communicate.
Tip
For more information about turning your wireless device on or off,
see Turning your wireless radio on or off on page 47.

Files
Copy your working files from your desktop computer to
your notebook before you travel.

If you need to access your desktop computer files from

your notebook while traveling, set up your desktop

computer for remote access. Contact your network
administrator for more information about remote
access.
Take extra recordable media for transferring files
between computers and backing up files.

79

CHAPTER 6: Traveling with Your Notebook

Security
Get a locking cable for your notebook so you can attach

a cable lock and leave your notebook in your hotel room

while you are away.
Always keep your notebook with you while waiting in
airports, train stations, or bus terminals. Be ready to
claim your notebook as soon as it passes through the
X-ray machine in security checkpoints.
Write down your notebook model number and serial
number (located on the bottom of your notebook) in
case of theft or loss, and keep the information in a safe
place. Also, tape your business card or an address label
to your notebook and accessories.
Whoever sits next to you or behind you can see your
notebook display. Avoid working with confidential files
until you can be sure of privacy.

Use a startup password to restrict access to your

notebook. The startup password is set using the BIOS
utility.
Caution
Use a password that you can remember, but that is difficult for
someone else to guess. The password feature is very secure, with no easy
way to recover a forgotten password. If you forget your password, you
must return your notebook to Gateway for service.

To create a startup password:

1 Restart your notebook. As soon as you see a startup

screen, press F2. The BIOS Setup utility opens.

2 Open the Security menu, highlight Set Supervisor

Password, then press ENTER and follow the
instructions. You must set the supervisor password
in order to set the user (startup) password.
Important
You must enter the Supervisor Password each time you use
the BIOS Setup utility.

3 Highlight Set User Password, then press ENTER and

follow the instructions. This is the password you need
to enter at startup.
Important
You must enter the User Password each time you turn on your
notebook if it was turned off or put in hibernate mode. You do not
need to enter the User Password if your notebook was put in Sleep
mode.

4 Highlight Password on boot, then press ENTER.

80

www.gateway.com

5 Highlight Enabled, then press ENTER.

6 Open the Exit menu, highlight Exit Saving
Changes, then press ENTER.

7 When you start your computer, you are prompted to

enter the user password you set in 3.

Review the information in Protecting your notebook in

your online User Guide.

Power
Take your AC power adapter to recharge the battery. If

you are traveling internationally, take power plug

adapters.
Take a portable surge protector to protect your notebook
from power surges.
To get the best performance from your notebook, avoid
using the battery whenever possible, monitor the
battery charge, and use the most efficient power
management settings. For information on conserving
battery power, using alternate power sources, and
monitoring the battery charge, see Managing Power
on page 65.

Additional tips
If you plan to use several USB peripheral devices, take a
portable USB hub to provide additional USB ports.

Take a network cable if you need to connect to a

network. Some hotels provide Internet connectivity only

through their networks.
If your notebook has been exposed to cold
temperatures, let it warm to room temperature before
turning it on.
Carry proof of ownership or a merchandise passport
when traveling internationally.

81

CHAPTER 6: Traveling with Your Notebook

Consult your insurance company and credit card

company to learn about emergency travel assistance if

your notebook is lost or damaged.
Take your recovery discs in case you need to install an
additional driver or software.
Tip
You can create a Drivers and Applications Recovery disc using the
Gateway Recovery Center.

82

CHAPTER7
Maintaining Your Notebook

Caring for your notebook

Cleaning your notebook
Maintaining the battery
Cleaning CDs or DVDs
Recovering your system

83

CHAPTER 7: Maintaining Your Notebook

Caring for your notebook

To extend the life of your notebook:
Be careful not to bump or drop your notebook, and do
not put any objects on top of it. The case, although
strong, is not made to support extra weight.
When transporting your notebook, we recommend that
you put it in a carrying case.
Keep your notebook away from magnetic fields.
Magnetic fields can erase data on hard drives.
Never turn off your notebook when the drive indicator
is on because data on the hard drive could be lost or
corrupted.
Avoid subjecting your notebook to extreme temperature
changes. The case (and LCD panel) can become brittle
and easy to break in cold temperatures and can melt or
warp in high temperatures. Damage due to either
extreme is not covered by your warranty. As a general
rule, your notebook is safest at temperatures that are
comfortable for you.
Keep all liquids away from your notebook. When spilled
onto notebook components, almost any liquid can result
in expensive repairs that are not covered under a
standard warranty.
Avoid dusty or dirty work environments. Dust and dirt
can clog the internal mechanisms and can lead to
permanent damage to the notebook.

Do not block the ventilation fan slots. If these slots are

blocked, your notebook may overheat resulting in

unexpected shutdown or permanent damage to the
notebook.
When storing your notebook for an extended period of
time, unplug AC power and remove the battery after
discharging them partway.

Cleaning your notebook

Keeping your notebook clean and the vents free from dust
helps keep your notebook performing at its best. You may
want to gather these items and put together a notebook
cleaning kit:
A soft, lint-free cloth
An aerosol can of air that has a narrow, straw-like
extension

84

www.gateway.com

Cotton swabs
A DVD drive cleaning kit

Cleaning the exterior

Warning
When you shut down your notebook, the power turns off, but some
electrical current still flows through your notebook. To avoid possible injury from
electrical shock, unplug the power cord, modem cable, and network cable from
the wall outlets and remove the battery.

Always turn off your notebook and other peripherals before

cleaning any components. Also, remove the battery before
cleaning any components.
Use a damp, lint-free cloth to clean your notebook and other
parts of your system. Do not use household abrasive or solvent
cleaners because they can damage the finish on components.
Your notebook is cooled by air circulated through the vents on
the case, so keep the vents free of dust. With your notebook
turned off and unplugged, brush the dust away from the vents
with a damp cloth. Be careful not to drip any water into the
vents. Do not attempt to clean dust from the inside of your
notebook with the exception of the memory bay.
Tip
You may want to occasionally open the memory bay door and remove
dust and lint using an aerosol can of air.

Cleaning the keyboard

You should clean the keyboard occasionally by using an aerosol
can of air with a narrow, straw-like extension to remove dust
and lint trapped under the keys.
If you spill liquid on the keyboard, turn off your notebook and
turn the notebook upside down. Let the liquid drain, then let
the keyboard dry before trying to use it again. If the keyboard
does not work after it dries, you may need to replace it. A
replacement keyboard may not be covered by your warranty.

Cleaning the notebook screen

Caution
A notebook LCD screen is made of specially coated glass and can be
scratched or damaged by abrasive or ammonia-based glass cleaners.

Use a soft cloth and water to clean the LCD screen. Squirt a little
water on the cloth (never directly on the screen), and wipe the
screen with the cloth.

85

CHAPTER 7: Maintaining Your Notebook

Maintaining the battery

The life span of a notebook battery is about 1.5 to 3 years,
under normal conditions. As the battery begins to die, you will
have to recharge the battery more frequently because it
cannot hold a full charge.
Do not expose the battery to high heat or freezing
temperatures. Hot batteries discharge very quickly, and cold
ones cannot create as much power. Short battery life is more
likely to be caused by heat than by charge/discharge patterns.
Keep your lithium-ion battery cool. Avoid a hot car, for
example.
Charge often, but do not try to fully discharge the battery
frequently. This only adds strain. Several partial discharges
(regular use), with frequent recharges, are better for
lithium-ion than one total discharge. Recharging a partially
charged lithium-ion battery does not cause any harm because
it has no memory.
Batteries with fuel gauges (notebooks) should be calibrated by
applying a deliberate full discharge once every 30 charges.
Running the battery down in the equipment does this. If
ignored, the fuel gauge becomes increasingly less accurate and
in some cases will cut off the device prematurely.
Using the right charger is important. By now you probably
know that each kind of battery has its own technology, its own
rate of charge, and so on. Charging lithium batteries correctly
is one way to extend their life and to avoid damage.

Storing batteries
Do not charge up the battery, then store it away. A stored
battery should be used every three to four weeks. Let the
battery fully discharge, then recharge to 40% if you plan to
store it again. If you store a battery for longer than three to
four weeks, the battery could fully discharge because the
battery circuitry itself consumes power.
If you have a spare lithium-ion battery, use one exclusively and
keep the other cool by placing it in the refrigerator. Make sure
that it is wrapped protectively and that nothing will be dropped
on it. Do not freeze the battery.
Do not use old batteries. Avoid purchasing spare lithium-ion
batteries and storing them for later use. Do not buy old stock,
even if it is sold at clearance prices. While it makes sense to
have 2 or 3 extra batteries, so that you always have a fresh one
charged up and ready to go, if you buy batteries and store
them for years, they may not work when you decide to use
them.

86

www.gateway.com

Consider removing the battery from your notebook when

running on fixed power. However, remember that when you
have removed the battery from your notebook while using it
with an electrical outlet, the automatic battery charger no
longer keeps the battery charged.
Caution
When the battery is in the notebook and the notebook is running on AC
power, the battery constantly charges, even though it has a full charge. This
reduces the life of the battery. If the battery is fully charged and you want to run
on AC power, remove the battery.

Cleaning CDs or DVDs

Wipe from the center to the edge, not around in a circle, using
a product made especially for the purpose.

Recovering your system

You can solve most notebook problems by following the
information in Troubleshooting on page 113 or in the
technical support pages at www.gateway.com. Problem
solving may also involve re-installing some or all of the
notebooks software (also called recovering or restoring your
system). Gateway provides everything you need to recover
your system under most conditions.
Caution
To prepare your notebook for additional system recovery options, you
should create a set of software and driver recovery discs as soon as possible. For
instructions, see Preparing for software and device driver recovery on page 89.

87

CHAPTER 7: Maintaining Your Notebook

If only one or two items of software or hardware have

stopped working correctly, the problem may be solved

by re-installing the software or the hardware drivers. To
recover software and drivers that were pre-installed at
the factory, see Recovering pre-installed software and
drivers on page 88. For instructions on reinstalling
software and drivers that were not pre-installed, see
that products documentation or support Web site.
If re-installing software or drivers does not help, then the
problem may be solved by returning your system to a
previous state when everything was working correctly.
For instructions, see Using Microsoft System Restore on
page 95.
If nothing else has solved the problem and you want to
return your system to factory condition, see Recovering
your system to its factory condition on page 98.

If you upgrade or exchange your hard drive or if your hard

drive is completely erased or corrupted, your only option for
system recovery may be to reinstall Windows from the
Windows DVD, then recover your pre-installed software and
device drivers using recovery discs that you created.
To re-install Windows using the Windows DVD, see
Recovering your system using the Windows DVD on
page 99.
To re-install your pre-installed software and device
drivers using recovery discs, see Recovering
pre-installed software and drivers using recovery discs
on page 93.

Recovering pre-installed software and drivers

You can perform a partial recovery by recovering the software
and device drivers that were pre-installed at the factory. If you
need to recover software that did not come pre-installed on
your system, you need to follow that softwares installation
instructions.
You can recover pre-installed software and drivers from a set
of recovery discs (you must create the discs) or by using
Gateway Recovery Center.

88

www.gateway.com

Preparing for software and device driver recovery

You can usually recover your pre-installed software and drivers
from your hard drive. However, if you ever re-install Windows
from the Windows DVD or install a new hard drive, you need
to recover your pre-installed software and drivers using a set
of software and driver recovery discs. Because these discs do
not come with your notebook, you should create your own set.
Caution
Although you may not be expecting to need recovery discs, we
recommend that you prepare for any eventuality and create a set of recovery
discs while you have the opportunity.

Important
Your notebook may have shipped with a Drivers and Applications Recovery
disc. If this is the case, you may want to create an additional set of discs in case
the originals are lost or damaged.

You should create a set of discs for recovering your

pre-installed software and device drivers, in case you need to
use them later for a complete system recovery. (Your notebook
must have a recordable disc drive to perform this procedure.)
To create discs for recovering pre-installed software
and drivers:
1 Click (Start), All Programs, Gateway Recovery
Center, then click Gateway Recovery Center. The
Gateway Recovery Center opens.

2 Click Applications and drivers external media, then

click Next. The What would you like to do? dialog box
opens.

3 Click Create system recovery discs, then click Next.

89

CHAPTER 7: Maintaining Your Notebook

4 Insert a blank, recordable disc into the recordable disc

drive, then click Next. If an AutoPlay dialog box opens,
click the x in the upper-right corner to close it.
A dialog box opens that tells you the number of blank
discs you need to create a full set of recovery discs.

5 If you have enough blank discs of the specified type, click

I have enough discs, then click Next. If you do not have
enough discs, choose a different disc type, or click
Cancel.
The disc recording begins. Label the discs as they are
completed.
Important
Use a permanent marker to label each disc Software and Driver
Recovery, along with a short description of which notebook the discs are
for. If you are recording multiple discs, as you remove each disc from the
drive, use the marker to label each disc 1 of x, 2 of x, 3 of x, and so on.

Tip
After a recovery disc is created, your notebook names the disc
Recovery13 for disc 1 of a 3-disc set, Recovery23 for disc 2, and so on.

6 If multiple discs are required, insert the additional blank

discs when prompted.

7 When the process is finished, the Congratulations!

window opens.

8 Click Finish.
9 Remove your final disc, then label all of the discs and
store them in a safe place.

90

www.gateway.com

Recovering pre-installed software and drivers using

Gateway Recovery Center
To recover specific drivers and software:
1 Click (Start), All Programs, Gateway Recovery
Center, then click Gateway Recovery Center. The
Gateway Recovery Center opens.
Important
If you have recently reinstalled Windows or installed a new hard
drive, and your Start menu does not contain Gateway Recovery Center
as an option, you must recover your software and drivers using software
and driver recovery discs you have created. For instructions, see
Recovering pre-installed software and drivers using recovery discs on
page 93.

91

CHAPTER 7: Maintaining Your Notebook

2 To recover software that was pre-installed, click

Programs, then click Application recovery.

- OR To recover device drivers that were pre-installed, click

Hardware, then click Device driver recovery.

3 Click the software or driver you want to recover, then

click Next.

92

www.gateway.com

Recovering pre-installed software and drivers using

recovery discs
If you created a multiple-disc set of recovery discs, each disc
contains a unique set of software and drivers. If a recovery disc
does not offer the software or driver you need to recover, try
another disc.
To recover software and drivers using recovery discs:

1 Insert a software and driver recovery disc into the CD or

DVD drive. If an AutoPlay dialog box appears,
click Run Grc_Vista.exe. If an AutoPlay dialog box does
not appear and Gateway Recovery Center does not start,
open Computer and run the file Grc_Vista.exe on the
disc.
The Gateway Recovery Center starts.

93

CHAPTER 7: Maintaining Your Notebook

2 To recover pre-installed software, click Application

recovery, then click the software you want to recover.

- OR To recover pre-installed device drivers, click Device

driver recovery, then click the type of driver you want
to recover.

3 Click Next.
4 If the software or driver is not shown on the list and you
have a multiple-disc set of recovery discs, close Gateway
Recovery Center and try another disc.

94

www.gateway.com

Using Microsoft System Restore

Microsoft System Restore periodically takes snapshots of
your system settings and saves them as restore points. In most
cases of hard-to-resolve software problems, you can return to
one of these restore points to get your system running again.
Windows automatically creates an additional restore point
each day, and also each time you install software or device
drivers. You can also create a restore point manually. For
instructions, see Manually creating a restore point on
page 97.
Help
For more information about using Microsoft System Restore, click Start,
then click Help and Support. Type windows system restore in the Search
Help box, then press ENTER.

To restore using Microsoft System Restore:

1 Click (Start), Control Panel, System and
Maintenance, then click Backup and Restore Center.
The Backup and Restore Center opens.

95

CHAPTER 7: Maintaining Your Notebook

2 On the left side of the window, click Repair Windows

using System Restore, then click Next. The Choose a
restore point dialog box opens.

3 Click the restore point you want, click Next, then click
Finish. A confirmation message box appears.

4 Click Yes. Your system is restored using the restore point

you specified. This process may take several minutes,
and may restart your notebook.

96

www.gateway.com

Manually creating a restore point

To manually create a restore point:
(Start), Control Panel, System and
Maintenance, then click Backup and Restore Center.
The Backup and Restore Center opens.

1 Click

2 On the left side of the window, click Create a restore

point or change settings, then click Next. The System
Properties dialog box opens to the System Protection tab.

3 Click Create. The Create a restore point dialog box opens.

4 Type a description for the restore point (such as the date

and time), then click Create. The restore point is created.

5 Click OK.

97

CHAPTER 7: Maintaining Your Notebook

Recovering your system to its factory condition

If your notebooks problems are not solved by any of the other
recovery options, you may need to recover its hard drive to its
factory condition. This process is called a factory recovery.
Caution
A complete factory recovery deletes everything on your hard drive, then
reinstalls Windows and any pre-installed software and device drivers. If you can
access important files on your hard drive, back them up now.

To delete everything on your hard drive and re-install all

factory software:
1 If you can still run Windows:

a Click

(Start), All Programs, Gateway Recovery

Center, then click Gateway Recovery Center. The
Gateway Recovery Center opens.

b Click Recovery, then click Next. Your notebook

restarts.

2 If you cannot run Windows:

a Turn on or restart your notebook.
b While the notebook is starting up, repeatedly press
F8 until the Recovery Options screen opens. If
Windows starts to load instead, restart the notebook
and try again.

3 Press the arrow keys on your keyboard to select Repair

Your Computer, then press ENTER.
Gateway System Recovery starts, and the System
Recovery Options dialog box opens.

4 Select a language and keyboard layout, then click Next.

5 Click the User name box to select a Windows user
account, click in the Password box and type the user
accounts password (if any), then click Next. The System
Recovery Options menu opens.

6 Click Restore Application. The Welcome to Gateway

System Recovery window opens.

7 Click Next.

98

www.gateway.com

8 To perform a recovery with data backup

(recommended), click Recovery with automatic data
backup, then click Next.
Important
Before your hard drive is recovered, your personal files will be
automatically backed up to c:\backup.

- OR To perform a full factory recovery without data backup,

click Full factory recovery, then click Next.
Caution
Continuing with the full factory recovery will delete everything on
your hard drive. Make sure that you have backed up any important files
you want to save.

9 Click Yes, then click Next. The Factory image recovery

window opens, which shows you the progress of the
system recovery.
When recovery is finished, the Recovery is complete
window opens.

10 Click Finish, then click Restart. Your notebook restarts

in its original factory condition. You still need to reinstall
any software that was not pre-installed on your
notebook.
If you selected Recovery with automatic data backup
in 8, you can find your backed up files in c:\backup.

Recovering your system using the

Windows DVD
If you install a new hard drive or completely re-format your
original hard drive, you must recover your system using the
Windows Vista operating system DVD. You also need to recover
your notebooks pre-installed software and device drivers.
To completely re-install Windows:
1 If you can still run Windows, back up your personal files,
and create a set of software and driver recovery discs (if
you have not already done so). For instructions, see To
create discs for recovering pre-installed software
and drivers: on page 89.

2 Insert the Windows DVD into your notebooks DVD drive,

then turn on or restart your notebook.

3 When the prompt Press any key to boot from CD or DVD

appears, press any key on your keyboard. A list of valid
boot devices appears.

99

CHAPTER 7: Maintaining Your Notebook

4 Press the arrow keys to select the drive containing the

Windows DVD, then press ENTER and follow the on-screen
instructions.

5 After Windows is completely re-installed, use the

software and driver recovery discs you created to
recover your notebooks pre-installed software and
device drivers. For instructions, see Recovering
pre-installed software and drivers using recovery discs
on page 93.

100

CHAPTER8
Upgrading Your Notebook
Preventing static electricity discharge
Adding or replacing memory modules
Replacing the hard drive kit

101

CHAPTER 8: Upgrading Your Notebook

Preventing static electricity

discharge
Warning
To avoid exposure to dangerous electrical voltages and moving parts, turn
off your notebook, unplug the power cord, modem cable, and network cable, and
remove the battery before opening the case.

Warning
To prevent risk of electric shock, do not insert any object into the vent holes
of the notebook.

Important
Before installing or replacing components, you should read and
understand the information in this section.

The components inside your notebook are extremely sensitive

to static electricity, also known as electrostatic discharge (ESD).
Before installing or replacing components, follow these
guidelines:
Avoid static-causing surfaces such as carpeted floors,
plastic, and packing foam.
Remove components from their antistatic bags only
when you are ready to use them. Do not lay components
on the outside of antistatic bags because only the inside
of the bags provide electrostatic protection.
Always hold components by their edges. Avoid touching
the edge connectors. Never slide components over any
surface.
Wear a grounding wrist strap (available at most
electronics stores) and attach it to a bare metal part of
your workbench or other grounded connection.
Touch a bare metal surface on your workbench or other
grounded object.

102

www.gateway.com

Adding or replacing memory

modules
Important
Use only memory modules designed for your Gateway notebook.

Tools
You need a small Phillips screwdriver to replace memory modules.

Your notebook uses memory modules called SO-DIMMs (Small

Outline Dual Inline Memory Modules). The modules are
available in various capacities and any module can be placed
in any slot.

Memory
bay

To add or replace memory modules:

1 Follow the guidelines under Preventing static electricity

discharge on page 102.

2 Turn off your notebook.

3 Disconnect the AC adapter, modem cable, and network
cable.

4 Disconnect all peripheral devices connected to the

notebook and remove any Express cards.

5 Turn your notebook over so the bottom is facing up, then

remove the battery. For more information, see
Changing batteries on page 67.

103

CHAPTER 8: Upgrading Your Notebook

6 Loosen the memory bay cover screw (this screw cannot

be removed).

Screw

7 Lift the memory bay cover, then remove it.

104

www.gateway.com

8 If you are removing a module, gently press outward on

the clip at each end of the memory module until the
module tilts upward.
Clip

Clip

105

CHAPTER 8: Upgrading Your Notebook

9 Pull the memory module out of the slot.

10 Hold the new or replacement module at a 30-degree

angle and press it into the empty memory slot. This
module is keyed so it can only be inserted in one
direction. If the module does not fit, make sure that the
notch in the module lines up with the tab in the memory
bay.

11 Replace the memory bay cover, then tighten the cover

screw.

12 Insert the battery, then turn your notebook over.

13 Connect the power adapter, modem cable, and network
cable.

14 Reconnect all peripheral devices and replace any

Express cards.

106

www.gateway.com

Replacing the hard drive kit

Tools
You need a small Phillips screwdriver and the Windows Vista DVD to
replace the hard drive kit.

If you would like more hard drive capacity, you can replace
your original drive with a higher-capacity drive.

Hard drive bay

To replace the hard drive kit:

1 Create a Drivers and Applications Recovery disc using the
Gateway Recovery Center. For more information, see
Recovering pre-installed software and drivers on
page 88.

2 Back up any data you want to transfer to the new hard

drive. For more information, see Backing up files in
your online User Guide.

3 Follow the guidelines under Preventing static electricity

discharge on page 102.

4 Turn off your notebook.

5 Disconnect the AC adapter, modem cable, and network
cable.

6 Disconnect all peripheral devices connected to the

notebook and remove any Express cards.

107

CHAPTER 8: Upgrading Your Notebook

7 Turn your notebook over so the bottom is facing up, then

remove the battery. For more information, see
Changing batteries on page 67.

8 Loosen the three hard drive bay cover screws (these

screws cannot be removed).
Screw
Screw

Screw

9 Lift the hard drive bay cover, then remove it.

10 Remove the two screws connecting the hard drive to the

notebook.

Screw

Screw

108

www.gateway.com

11 Using the plastic tab, slide the old hard drive, then
remove it.

12 If your new hard drive already includes the hard drive

bracket, go to 17.
-ORIf you need to move the hard drive bracket from your old
hard drive to your new hard drive, go to 13.

109

CHAPTER 8: Upgrading Your Notebook

13 Remove the four screws that secure the hard drive to the
hard drive bracket.

Screw

Screw

Screw

Screw

14 Remove the bracket from the old drive.

15 Place the new drive, label side up, onto the bracket so
the screw holes line up.

16 Replace the screws that secure the bracket to the drive.

110

www.gateway.com

17 Slide the new hard drive kit into your notebook, then
replace the screws that secure the hard drive kit to the
notebook.

18 Replace the hard drive bay cover, then tighten the cover
screws.

19 Insert the battery, then turn your notebook over.

20 Connect the power adapter, modem cable, and network
cable

21 Turn on your notebook, open the DVD drive, insert the

Windows DVD, close the DVD drive, then restart your
notebook.

22 When the prompt Press any key to boot from CD or DVD

appears, press any key on your keyboard and follow the
on-screen instructions. As part of the process you may
be prompted to insert your Drivers and Applications
Recovery disc.

23 Reconnect all peripheral devices and replace any

Express cards.

111

CHAPTER 8: Upgrading Your Notebook

112

CHAPTER9
Troubleshooting

Safety guidelines
First steps
Troubleshooting
Telephone support

113

CHAPTER 9: Troubleshooting

Safety guidelines
Warning
Do not try to troubleshoot your problem if power cords or plugs are
damaged, if your notebook was dropped, or if the case was damaged. Instead,
unplug your notebook and contact a qualified computer technician.

Tip
For more information about preventing damage from static electricity, see
Preventing static electricity discharge on page 102.

While troubleshooting your notebook, follow these safety

guidelines:
Never remove the memory bay cover or hard drive bay
cover while your notebook is turned on, while the
battery is installed, and while the modem cable, network
cable, and AC power adapter are connected to your
notebook.
Make sure that you are correctly grounded before
accessing internal components.
After you complete any maintenance tasks where you
remove the memory bay cover or hard drive bay cover,
make sure that you replace the cover, reinstall any
screws, then replace the battery before you start your
notebook.
Help
For more information about troubleshooting, click Start, then click Help
and Support. Type the keyword troubleshooting in the Search Help box,
then press ENTER.

First steps
If you have problems with your notebook, try these things first:
Make sure that the AC power adapter is connected to
your notebook and an AC outlet and that the AC outlet
is supplying power.
Make sure that the power cord is firmly connected to the
AC power adapter.
If you use a power strip or surge protector, make sure
that it is turned on.

114

www.gateway.com

If the notebook will not turn on, try turning it on with

the notebook plugged in and the battery removed, then

try turning the notebook on with the notebook
unplugged and the battery installed.
If a peripheral device (such as a keyboard or mouse) does
not work, make sure that all connections are secure.

Make sure that your hard drive is not full.

If an error message appears on the screen, write down

the exact message. The message may help Gateway

Customer Care in diagnosing and fixing the problem.
If you added or removed peripheral devices, review the
installation procedures you performed and make sure
that you followed each instruction.
If an error occurs in a program, see the programs
printed documentation or the online help.

Troubleshooting
Troubleshooting topics are listed in alphabetical order.

Audio
Audio troubleshooting is covered under Sound on page 137.

Battery
Battery troubleshooting is covered under Power on
page 135.

CD drives
CD drive troubleshooting is covered under DVD drives on
page 117.

Diskette drive (external)

The diskette drive is not recognized
Shut down and restart your notebook.
Disconnect the USB cable, then reconnect it.

115

CHAPTER 9: Troubleshooting

You see an Access Denied or Write protect error

message
Move the write-protection tab in the upper-right corner
of the diskette down (unprotected).
The diskette may be full. Delete unnecessary files on the
diskette and try again.
Not all diskettes are IBM-compatible. Make sure that the
diskette you are using is IBM-compatible.
Try a different diskette. Occasionally diskettes are flawed
and cannot be read by the diskette drive.
You see a Disk is full error message
Delete unnecessary files on the diskette.
Try a different diskette. Occasionally diskettes are flawed
and cannot be read by the diskette drive.
Run Error checking on the diskette. If errors are detected
and corrected, try using the diskette again. For
instructions on running Error checking, see Checking
the hard drive for errors in your online User Guide.
You see a Non-system disk, NTLDR is missing, or Disk
error error message
Eject the diskette from the diskette drive, then press
ENTER.
Make sure that the diskette you are using is
IBM-compatible.
The diskette drive status indicator is lit continuously
Remove the diskette from the drive. If the indicator stays
on, try restarting your notebook.

Display
The screen is too dark
Adjust the brightness using the system keys or Windows
Mobility Center. For more information about adjusting
the brightness, see Adjusting the brightness on
page 44.
The screen resolution is not correct
Change the screen resolution from the Display Settings
dialog box. For instructions on changing the screen
resolution, see Changing the color depth and screen
resolution in your online User Guide.

116

www.gateway.com

The text on the display is dim or difficult to read

Adjust the brightness using the system keys or Windows
Mobility Center. For more information about adjusting
the brightness, see Adjusting the brightness on
page 44.

Change the display settings. For instructions on

changing the display settings, see Changing screen
settings in your online User Guide.

Move your notebook away from sources of electrical

interference, such as televisions, unshielded speakers,
microwaves, fluorescent lights, and metal beams or
shelves.
The display has pixels that are always dark or too bright
This condition is normal and inherent in the TFT
technology used in active-matrix LCD screens. Gateways
inspection standards keep these to a minimum. If you
feel these pixels are unacceptably numerous or dense on
your display, contact Gateway Customer Care to identify
whether a repair or replacement is justified based on the
number of pixels affected.
The display is blank
Adjust the brightness using the system keys or Windows
Mobility Center. For more information about adjusting
the brightness, see Adjusting the brightness on
page 44.

Make sure the notebook is not in Sleep or Hibernate

mode. Press the power button.

The notebook may be sending its display to an external
monitor or projector. Press FN + F4 several times to
toggle through the LCD panel, an external monitor or
projector, or both.

DVD drives
Your notebook does not recognize a disc
The disc may not be seated correctly in the tray. When
you place a disc on the tray, make sure that you press
the disc firmly onto the spindle so the retainers hold the
disc in place.

Make sure that the disc label is facing up, then try again.
Try a different disc. Occasionally discs are flawed and
cannot be read by the drive.

117

CHAPTER 9: Troubleshooting

Some music CDs have copy protection software. You may

not be able to play these CDs on your notebook.

Your notebook may be experiencing some temporary

memory problems. Shut down and restart your

notebook.
Clean the disc. For more information, see Cleaning CDs
or DVDs on page 87.

An audio CD does not produce sound

Make sure that the CD label is facing up, then try again.
Some music CDs have copy protection software. You may
not be able to play these CDs on your notebook.
Make sure that the volume control on your notebook is
turned up. For more information about using your
volume control, see Adjusting the volume on page 45.
Make sure that the Windows volume control is turned
up. For instructions on how to adjust the volume control
in Windows, see Adjusting the volume on page 45.
Make sure that Mute controls are turned off.

If you are using the built-in speakers, make sure that

nothing is plugged into the headphone jack on the

notebook. For the location of the headphone jack, see
Front on page 6.
If you are using powered speakers, make sure that they
are plugged in and turned on.
Clean the disc. For more information, see Cleaning CDs
or DVDs on page 87.

Your notebook may be experiencing some temporary

memory problems. Shut down and restart your

notebook.
Reinstall the audio device drivers. For more information,
see Recovering pre-installed software and drivers on
page 88.

A DVD movie will not play

Make sure that the label or side you want to play is facing
up, then try again.
Shut down and restart your notebook.
Clean the DVD. For more information, see Cleaning CDs
or DVDs on page 87.
Make sure that the discs regional code and your DVD
drives regional code match.
Make sure that a DVD player program has been installed
on your notebook. For instructions on playing a DVD, see
Playing music and movies in your online User Guide.

118

www.gateway.com

A DVD does not produce sound on a television

Audio is transmitted through an HDMI connection,
however, audio is not transmitted through a monitor
jack. If you are connecting your notebook to a television
using the monitor jack, use the built-in speakers, a set
of headphones or external powered speakers, or
connect your notebook to a stereo system to hear sound
while playing a DVD.
You cannot eject a CD or DVD
Your notebook must be turned on to remove CDs and
DVDs. If you do not want to turn on your notebook,
manually eject the disc by inserting an opened paper clip
into the manual eject hole. For the location of the manual
eject hole, see Using a tray-load DVD drive on page 53.

Ethernet
Ethernet troubleshooting is covered under Networks (wired)
on page 131.

Express Cards
You installed an Express Card and now your notebook is
having problems
Make sure that you have correctly installed required
software for the Express Card. For more information, see
your Express Cards documentation.

File management
A file was accidentally deleted
Recover the file from the Recycle Bin by following the
instructions in Deleting files and folders in your online
User Guide.
Caution
If a file was deleted while holding down the SHIFT key or if the
Recycle Bin has been emptied, the file cannot be restored.

Help
For more information about restoring deleted files, click Start,
then click Help and Support. Type the keyword System Restore in
the Search Help box, then press ENTER.

119

CHAPTER 9: Troubleshooting

Fingerprint reader
The fingerprint reader does not recognize your fingerprint
Make sure that you are using the correct method for
swiping your finger. For more information, see Running
the TouchStrip Tutorial on page 31.
Make sure that you are using a finger that you have
enrolled. For more information, see Enrolling your
fingerprints on page 32.
For more information about troubleshooting the
fingerprint reader, click
(Start), All Programs,
Protector Suite QL, then click Help.

Hard drive
You see an Insufficient disk space error message
Delete unnecessary files from the hard drive using Disk
Cleanup. For instructions on deleting unnecessary files,
see Deleting unnecessary files in your online User
Guide.
Empty the Recycle Bin by right-clicking the Recycle Bin
icon, then clicking Empty Recycle Bin.
Caution
All deleted files will be lost when you empty the Recycle Bin.

Save your files to another drive. If the hard drive is full,

copy any files not regularly used to backup media, then
delete them from the hard drive.
Help
For more information about file management, click Start, then
click Help and Support. Type the keyword file management in the
Search Help box, then press ENTER.

You see a Data error message

This may be the result of a defective area on the hard
drive. To fix hard drive problems, run the Error checking
program. For instructions on fixing hard drive problems,
see Checking the hard drive for errors in your online
User Guide.
The hard drive cannot be accessed, or you see a General
failure reading drive C error message
If a diskette is in the diskette drive, eject it and restart
your notebook.

120

www.gateway.com

Make sure that the hard drive is installed correctly.

Remove it, firmly reinsert it, then restart your notebook.

For more information about removing your hard drive,
see Replacing the hard drive kit on page 107.
If your notebook has been subjected to static electricity
or physical shock, you may need to reinstall the
operating system.

Internet
You cannot connect to the Internet
If you are using a dial-up modem, make sure that the
modem cable is plugged into the optional modem jack
and not the Ethernet network jack. For the location of
your modem jack, see Back on page 10.
-ORIf you are using a cable or DSL modem, make sure that
the modem cable is plugged into the Ethernet network
jack and not the optional modem jack. For the location
of your network jack, see Left on page 7.

Make sure that you do not have a problem with your

modem. For more information, see Modem (dial-up) on
page 127.

Make sure that your account with your Internet service

provider (ISP) is set up correctly. Contact your ISP
technical support for help.
Help
For more information about troubleshooting Internet
connections, click Start, then click Help and Support. Type the keyword
troubleshooting connections in the Search Help box, then press
ENTER.

You see an Unable to locate host message and are unable

to browse the Internet
This problem can occur when you have typed a URL (Web
address) incorrectly, you have lost your Internet
connection, or your ISP is having technical difficulties.
Double-check the URL or try a different URL. If the error
message still appears, disconnect from the ISP
connection and close your browser, then reconnect and
open the browser. If you still get the error, your ISP may
be having technical difficulties.

121

CHAPTER 9: Troubleshooting

Connecting to a Web site takes too long

Many factors can affect Internet performance:
The condition of the telephone lines in your residence or
at your local telephone service
The condition of the Internet computers to which you
connect and the number of users accessing those
computers

The complexity of graphics and multimedia on Web

pages

Having multiple Web browsers open, performing

multiple downloads, and having multiple programs
open on your notebook
People are sending you e-mail messages, but you have not
received any mail
Click the receive button in your e-mail program.
Make sure that your account with your Internet service
provider (ISP) is set up correctly. Contact your ISP for
technical support.

Keyboard
A keyboard character keeps repeating or you see a
Keyboard stuck or Key failure error message
Make sure that nothing is resting on the keyboard.
Make sure that a key is not stuck. Press each key to
loosen a key that might be stuck, then restart your
notebook.
You are pressing a letter key and a number appears on the
screen
The numeric keypad is turned on. For more information
about using your keyboard, see Using the keyboard on
page 26.
An external keyboard does not work
Make sure that the keyboard cable is plugged in
correctly.

Remove all extension cables and switchboxes.

Clean the keyboard by using an aerosol can of air with
a narrow, straw-like extension to remove dust and lint
trapped under the keys.

122

www.gateway.com

Try a keyboard that you know works to make sure that

the keyboard port works.

If you spilled liquid in the keyboard, turn off your

notebook and unplug the keyboard. Clean the keyboard
and turn it upside down to drain it. Let the keyboard dry
before using it again. If the keyboard does not work after
it dries, you may need to replace it.

Media Center
This section only covers problems relating to Media Center
mode. Media Center mode is available only on Windows Vista
Home Premium and Windows Vista Ultimate versions. To view
Media Center troubleshooting information that is not covered
in this section, go to the Gateway support Web Site at
www.gateway.com.
Help
For more information about Windows Media Center, click Start, then click
Help and Support. Type the phrase Media Center in the Search Help box,
then press ENTER.

The Media Center video display looks bad on your TV

Many factors, such as the display type, quality of the video
source, type of connection used, quality of video cables, display
device screen resolution, size of TV, age of the TV, or the type
of TV (interlaced or progressive scan), can affect the video
quality significantly:
Display typeSome retail TVs may provide lower quality
video. A progressive scan display device with an HDMI
or VGA input is the best choice.

123

CHAPTER 9: Troubleshooting

Type of connection usedYou can connect the notebook

video output to a TV. However, the connection type has
an affect on the video quality. The notebook has two
video outputs:
HDMIIf your TV includes an HDMI port, connect the
HDMI cable from the notebooks HDMI Out port to the
TVs HDMI In port. HDMI display quality is usually
superior for TV images. HDMI also transmits audio to
your television. Many older TVs do not have an HDMI
port.
VGAIf your TV does not include and HDMI port, but
does include a VGA port, connect the VGA cable from
the notebooks VGA (monitor) port to the TVs VGA In
port. Many older TVs do not have a VGA port. VGA
only transmits video. You should use the built-in
speakers, a set of headphones or external powered
speakers, or connect your notebook to a stereo
system to hear sound.

Quality of video cablesPoor quality or the incorrect

type of video cables can cause problems and affect the
video quality. Gateway recommends using high-quality
video cables that can be purchased from Gateway.
Important
Cable connections must be made correctly for optimal video
quality. A poor cable connection can lower video quality.

Screen resolutionBy default, the notebook uses a

screen resolution optimized for the LCD screen. Many
older TVs cannot display this high of a resolution and
may shift, scramble, or scroll the picture. For a better
picture on a TV display, you may need to lower the screen
resolution to 800 600 or 640 480. For more
information about changing the screen resolution, see
Changing color depth and screen resolution in your
online User Guide.
Help
For more information about adjusting display settings, click Start,
then click Help and Support. Type the keyword changing display
settings in the Search Help box, then press ENTER.

Size of display deviceSmall computer monitors for

standard computer applications are generally not
optimized for motion video playback. Although they
offer excellent resolutions and refresh rates, they are
designed to make static white backgrounds with black

124

www.gateway.com

text look readable. Some small display devices do not

make colorful motion video look its best. Generally,
video will look better on a larger display device.
Age of the TVNewer TVs usually have more advanced
features, produce a better quality picture, and support
higher screen resolutions. The video display will likely be
better on a newer model TV.

Type of TV (interlaced or progressive scan)

Many CRT (tube) TVs use interlaced video. Interlaced
video displays a video frame with two passes of
alternating scan lines. The TV screen first displays the
video image odd lines one at a time, sequentially from
top to bottom, then it fills in the other half of the video
image with the even lines. Because most TVs use this
interlaced method to display the picture on the screen,
a standard interlaced analog TV will most likely flicker
when displaying thin lines and small text. An interlaced
video display device will produce a lower quality display,
especially when viewing and using the notebook
functions.
Progressive scan video displays a video frame with one
pass of sequential scan lines. A progressive scan TV
displays the entire picture, drawn sequentially from top
to bottom, without the odd/even interlacing. This results
in a fuller, sharper picture and better display quality for
viewing and using the Media Center functions. The
progressive scan picture is also brighter and easier on
your eyes.
You need to configure your notebook to output to a TV
In Media Center mode, your notebook detects whether
you are using a VGA or an HDMI display device and
automatically changes the display settings for the type
of display device you are using. For more information,
review the FAQ topic at www.gateway.com.
You want to change display settings to get better TV or DVD
image quality
Adjust the display device brightness, contrast, hue, and
saturation. For more information review the FAQ topic at
www.gateway.com.
You want to know whether you can burn videos that were
recorded in Media Center mode to a DVD
Yes, you can. The Media Center saves recorded videos in
the DVR-MS format. You can burn a DVR-MS file to a DVD
with DVD recording (burning) software, such as
Power2Go, and with the Media Center itself.

125

CHAPTER 9: Troubleshooting

You want to know whether you can play recorded videos

on other computers
Yes, you can. A DVR-MS file recorded to DVD can be
replayed on another computer with Media Center or on
a computer without Media Center provided that it has a
DVD player and DVD decoder software (such as
PowerDVD). The computer without Media Center must
also have Windows Vista or Windows XP with Service
Pack (SP) 1 or 2, Windows Media Player 9 or later, and the
Windows patch Q810243 Update.
You want to know whether you can play recorded videos
on your home DVD player
Yes, you can. DVDs recorded with the Media Center can
be played on a home DVD player.

Memory
You see a Memory error message
Make sure that the memory module is inserted correctly
in the memory bay slot. For more information about
installing memory, see Adding or replacing memory
modules on page 103.
Use the Memory Diagnostics Tool to help determine if a
memory module is failing.
To check the memory:

1 Click

(Start), then click Control Panel. The Control

Panel window opens.

2 Click System and Maintenance.

3 Click Administrative Tools.
4 Double-click Memory Diagnostics Tool, then follow
the on-screen instructions.
Help
For more information about troubleshooting memory errors, click
Start, then click Help and Support. Type the keyword memory error
in the Search Help box, then press ENTER.

You see a Not enough memory error message

Close all programs, then restart your notebook.

126

www.gateway.com

Memory card reader

Drive letter for the memory card slot does not appear in
the My Computer window
Reboot your notebook.

Modem (cable or DSL)

The modem does not connect
Make sure that the modem cable is plugged into the
Ethernet network jack and not the optional modem jack.
For the location of your network jack, see Left on
page 7.
See the documentation that came with your modem for
additional troubleshooting information.

Modem (dial-up)
Your modem does not dial or does not connect
Make sure that the modem cable is plugged into the
optional modem jack and not the Ethernet network jack.
For the location of your modem jack, see Back on
page 10.
Make sure that your notebook is connected to the
telephone line and the telephone line has a dial tone.

Make sure that the modem cable is less than 6 feet

(1.8 meters) long.

Remove any line splitters or surge protectors from your

telephone line, then check for a dial tone by plugging a

working telephone into the telephone wall jack.
If you have additional telephone services such as call
waiting, call messaging, or voice mail, make sure that all
messages are cleared and call waiting is disabled before
using the modem. Contact your telephone service to get
the correct code to temporarily disable the service. Also
make sure that the modem dialing properties are set
appropriately.
Help
For more information about dialing properties, click Start, then
click Help and Support. Type the keyword dialing in the Search Help
box, then press ENTER.

127

CHAPTER 9: Troubleshooting

To check the dialing properties:

1 Click

(Start), then click Control Panel. The Control

Panel window opens.

2 Click Hardware and Sound.

3 Click the Phone and Modem Options. The Phone
and Modem Options dialog box opens.

4 Click the Dialing Rules tab.

5 Click the location from which you are dialing, then
click Edit. The Edit Location dialog box opens.

6 Make sure that all settings are correct.

Disconnect any answering machine, fax machine, or

printer that is on the same line as the modem. Do not

connect these devices to the same telephone line as the
modem.
Make sure that you are not using a digital, rollover, or
PBX line. These lines do not work with your modem.

Check for line noise (scratchy, crackling, or popping

sounds). Line noise is a common problem that can cause
the modem to connect at a slower rate, abort
downloads, or even disconnect. The faster the modem,
the less line noise it can tolerate and still work correctly.
Listen to the line using your telephone. Dial a single
number (such as 1). When the dial tone stops, listen for
line noise. Wiggle the modem cable to see if that makes
a difference. Make sure that the connectors are free from
corrosion and all screws in the wall or telephone wall jack
are secure.
You can also call your telephone service and have the
telephone line checked for noise or low line levels.

Try another telephone line (either a different telephone

128

number in your house or a telephone line at a different

location). If you can connect on this line, call your
telephone service to fix the original line.
Try connecting with the modem at a lower connection
speed. If reducing the connect speed lets you connect,
call your telephone service. The telephone line may be
too noisy.

www.gateway.com

You cannot connect to the Internet

The ISP may be having technical difficulties. Contact your
ISP for technical support.
See if the modem works with a different
communications program. The problem may be with
just one program.
Review the troubleshooting information under
Internet on page 121.
Your 56K modem does not connect at 56K
Current FCC regulations restrict actual data transfer rates
over public telephone lines to 53K. Other factors, such as
line noise, telephone service provider equipment, or ISP
limitations, may lower the speed even further.
If your notebook has a v.90 modem, the speed at which
you can upload (send) data is limited to 33.6K. If your
notebook has a v.92 modem, the speed at which you can
upload data is limited to 48K. Your ISP may not support
48K uploads.
Your fax communications program only sends and receives
faxes at 14,400 bps when you have a 56K modem
Current fax technology only supports a maximum send
and receive rate of 14,400 bps.
The modem is not recognized by your notebook
Make sure that the line connected to the modem is
working and plugged into the appropriate port on your
notebook. For the location of your optional modem jack,
see Back on page 10.

If the modem shares the telephone line with another

device, make sure that the telephone line is not in use

(for example, someone is on the telephone, or another
modem is in use).
Use a different modem cable. Some telephone cables do
not meet required cable standards and may cause
problems with the modem connection.
Shut down and restart your notebook.
Run Windows modem diagnostics.
To run modem diagnostics:

1 Close all open programs.

2 Click (Start), then click Control Panel. The Control
Panel window opens.

3 Click Hardware and Sound.

129

CHAPTER 9: Troubleshooting

4 Click Phone and Modem Options. The Phone and

Modem Options dialog box opens.

5 Click the Modems tab.

6 Click your modem, then click Properties. The Modem
Properties dialog box opens.

7 Click the Diagnostic tab, then click Query Modem.

If information about the modem appears, the
modem passed diagnostics. If no modem
information is available, a white screen appears with
no data, or if you get an error such as port already
open or the modem has failed to respond, the modem
did not pass diagnostics.
Help
For more information about modem troubleshooting, click
Start, then click Help and Support. Type the keyword modem
troubleshooting in the Search Help box, then press ENTER.

The modem is noisy when it dials and connects

When your modem tries to connect to another modem,
it begins handshaking. Handshaking is a digital getting
acquainted conversation between the two modems
that establishes connection speeds and communication
protocols. You may hear unusual handshaking sounds
when the modems first connect. If the handshaking
sounds are too loud, you can turn down the modem
volume.
To turn down the modem volume:
1 Click (Start), then click Control Panel. The Control
Panel window opens.

2 Click Hardware and Sound.

3 Click Phone and Modem Options. The Phone and
Modem Options dialog box opens.

4 Click the Modems tab.

5 Click the modem you want to adjust, then click
Properties. The Modem Properties dialog box opens.

6 Click the Modem tab, then adjust the Speaker

volume control.

7 Click OK twice to close the Phone and Modem

Options dialog box.

Mouse
See also Touchpad on page 138.

130

www.gateway.com

The external mouse does not work

Make sure that the mouse cable is plugged in correctly.
Shut down and restart your notebook.
Remove all extension cables and switch boxes.
Try a mouse you know is working to make sure that the
mouse port works.
The external mouse works erratically
Clean the mouse.
Some mouse pad patterns confuse optical mice. Try the
mouse on a different surface.

Networks (wired)
Help
For more information about network troubleshooting, click Start, then
click Help and Support. Type the keyword network troubleshooting in the
Search Help box, then press ENTER.

You cannot see the other computers on your wired Ethernet

network
Make sure that your Ethernet cable is plugged into the
Ethernet jack on your notebook. Make sure that the
other end is plugged into a router. For the location of
your network jack, see Left on page 7.
Make sure that all computers are plugged into a
powered electrical outlet and turned on.

Make sure that the router is plugged into a powered

electrical outlet and turned on. Most routers have lights

that indicate they are working. For more information,
see the documentation that came with your router.
Make sure that all computers on your network have the
same workgroup name.

Make sure that all computers are using the same Subnet
Mask.

If you assigned IP addresses to the computers, make sure

that all computers have different IP addresses. For home
networks, IP addresses should be 192.168.N.N where N
is a number you assign between 0 and 254. The first N
should be the same for all computers on your network
and the second N should be different for all computers
on your network.

131

CHAPTER 9: Troubleshooting

Your wired Ethernet network is running slower than you

expect
If your Ethernet network is running slower than you
expect, check the speed of each Ethernet component.
For best results, all Ethernet components should be
standard Ethernet (10 Mbps), Fast Ethernet (100 Mbps or
10/100 Mbps), or Gigabit Ethernet (1000 Mbps or
10/100/1000 Mbps). A mixture of Ethernet, Fast
Ethernet, and Gigabit Ethernet components will result in
your network running at the slowest component speed.
You cannot connect to your company network
Every network is unique. Contact your company
computer department or network administrator for
help.
Internet Explorer is unable to access the Internet
Reset the power on your cable or DSL modem and your
access point. This reestablishes communication between
your Internet Service Provider and your modem and
between your modem and your access point.
If you previously accessed the Internet through a dial-up
modem, Internet Explorer may not be set up to access
the Internet through a network. Remove the dial-up
connection in the Internet Options in Internet Explorer.
You cannot connect to your home network
If your notebook is a member of a domain at your
workplace, you may not be able to connect your
notebook to your home network workgroup to access
shared files or printers on your home network. You may,
however, be able to access the Internet through your
home network.
Caution
If your notebook was a member of a domain before you join a
workgroup, it is disjoined from the domain and your computer account
disabled. Contact your company computer department or network
administrator for more information.

Every home network is unique. See the documentation

that came with your network equipment for
troubleshooting information.

132

www.gateway.com

Networks (wireless)
You turned wireless networking on, but it takes a while to
connect
When wireless networking is turned on, it automatically
scans for available connections. The scan can take
approximately 30 seconds to complete.
Your connection on the network seems intermittent or your
wireless network is running slower than you expect
The speed of a wireless network is related to signal
strength. Signal strength is affected by the distance
between your wireless network devices, by radio
interference, and by interference from natural
obstructions such as walls, ceilings, floors, and doors.
If your wireless network is running slower than you
expect, you should check your network signal strength.
If you find the signal strength is low, try moving to a new
location to increase the signal strength.
Important
Note any antenna placement constraints in the access point user
guide because the speed of a wireless network is related to signal
strength. Signal strength is affected by the distance between your
wireless network devices, by radio interference, and by interference from
natural obstructions such as walls, floors, and doors.

To check the signal strength:

1 Click

(Start), right-click Network, then click

Properties. The Network and Sharing Center window
opens.

2 Click View status for the network connection. The

Wireless Network Connection Status dialog box
opens. The meter shows the signal strength for
wireless networking on your computer if other
computers with the same network name are within
range of your computer.
You are in a wireless network, you can see the network, but
cannot communicate, send files, print, or get to the Web
If your access point uses WEP, go to the Wireless
Networking Properties window and make sure that both
the WAP and the WLAN in the computer have matching
WEP keys.

133

CHAPTER 9: Troubleshooting

You are in a wireless network, but no available networks

are listed in the Connect to a network dialog box
If the network you are attempting to access does not
broadcast its SSID, you need to request the SSID from the
administrator and add that networks information into
the wireless utility.
You may want to try entering ANY as the SSID, which
will make the computer try to auto-detect the network.
Your wireless network is listed as a preferred network, but
it has an x on it
An x means your preferred network is not currently
available or you are not currently in range to connect.
Internet Explorer is unable to access the Internet
Reset the power on your cable or DSL modem and your
access point. This reestablishes communication between
your Internet Service Provider and your modem and
between your modem and your access point.
If you previously accessed the Internet through a dial-up
modem, Internet Explorer may not be set up to access
the Internet through a network. Remove the dial-up
connection in the Internet Options in Internet Explorer.
You cannot see other computers on your network
Your notebook may not have the same workgroup name
as the other computers on your network. For more
information, see Naming the computers and
workgroup in your online User Guide.
If your notebook was previously connected directly to
your cable or DSL modem, and your ISP requires you to
use a static IP address, your notebook is not set up to
use a DHCP server. Modify the network properties so
your notebook is set up for using a DHCP server.
You cannot connect to your network
If your notebook is a member of a domain at your
workplace, you may not be able to connect your
notebook to your home network workgroup to access
shared files or printers on your home network. You may,
however, be able to access the Internet through your
home network.
Caution
If your notebook was a member of a domain before you join a
workgroup, it is disjoined from the domain and your computer account
disabled. Contact your company computer department or network
administrator for more information.

134

www.gateway.com

Passwords
Your notebook does not accept your password
Make sure that CAPS LOCK and NUM LOCK are turned off, then
retype the password.
You forgot your startup password
The password feature (which is set in the BIOS Setup utility) is
very secure, with no easy way to recover a forgotten password.
You must return your notebook for repair. Call Gateway
Customer Care for instructions.

Power
Your notebook is not working on AC power
Make sure that your AC power adapter is connected
correctly to your notebook. For instructions on
connecting the AC power adapter, see Connecting the
AC adapter on page 18.
If your notebook is plugged into a surge protector, make
sure that the surge protector is connected securely to an
electrical outlet, turned on, and working correctly. To test
the outlet, plug a working device, such as a lamp, into
the outlet and turn it on.
Make sure that the AC power adapter cables are free
from cuts or damage. Replace any damaged cables.
Your notebook is not working on battery power
Check the power management settings. For more
information about using power management settings,
see Changing notebook power settings on page 72.
Make sure that the battery is installed correctly. For
instructions on inserting your battery, see Changing
batteries on page 67.
Make sure that the battery is fully recharged. For more
information about recharging the battery, see
Recharging the battery on page 66.

Make sure that the battery is calibrated correctly. For

instructions on recalibrating your battery, see

Recalibrating the battery on page 68.
Let the battery return to room temperature.

135

CHAPTER 9: Troubleshooting

Printer
Help
For more information about printer troubleshooting, click Start, then click
Help and Support. Type the keyword printer troubleshooting in the
Search Help box, then press ENTER.

The printer will not turn on

Make sure that the printer is online. Many printers have
an online/offline button that you may need to press.
Make sure that the power cable is plugged into an
AC power source.
The printer is on but will not print
Check the cable between the printer and your notebook.
Make sure that it is connected to the correct port.
Make sure that the printer is online. Many printers have
an online/offline button that you may need to press so
the printer can start printing. Press the button to put the
printer online.

If the printer you want to print to is not the default

printer, make sure that you have selected it in the printer
setup.
To set a default printer:

1 Click

(Start), then click Control Panel. The Control

Panel window opens.

2 Click Hardware and Sound.

3 Click Printers.
4 Right-click the name of the printer you want to be the
default printer, then click Set as Default Printer.

Reinstall the printer driver. See the guide that came with
your printer for instructions on installing the printer
driver.
You see a Printer queue is full error message
Make sure that the printer is not set to work offline.
To make sure that the printer is not set to work offline:

1 Click

(Start), then click Control Panel. The Control

Panel window opens.

2 Click Hardware and Sound.

3 Click Printers.

136

www.gateway.com

4 If the printer status is Offline, right-click the name

of the printer you want to use, then click Use Printer
Online to set the printer to work online.

Wait until files have been printed before sending

additional files to the printer.

If you print large files or many files at one time, you may
want to add additional memory to the printer. See the
printer documentation for instructions for adding
additional memory.
You see a Printer is out of paper error message
After adding paper, make sure that the printer is online. Most
printers have an online/offline button that you need to press
after adding paper.

Sound
Help
For more information about troubleshooting sound issues, click Start,
then click Help and Support. Type the keyword sound troubleshooting in
the Search Help box, then press ENTER.

You are not getting sound from the built-in speakers

Make sure that headphones are not plugged into the
headphone jack.
Make sure that the volume control on your notebook is
turned up. For more information about using your
volume control, see Adjusting the volume on page 45.
Make sure that the Windows volume control is turned
up. For instructions on how to adjust the volume control
in Windows, see Adjusting the volume on page 45.

Make sure that Mute controls are turned off.

Status indicators
The status indicators are not functioning
Make sure the status indicators are turned on. Press
FN+F1 to toggle the indicators.

137

CHAPTER 9: Troubleshooting

Touchpad
Touchpad is not working
Make sure the touchpad is turned on. For more
information, see Changing mouse, touchpad, or
pointing device settings in your online User Guide.
The notebook is not responding when you click or tap on
the touchpad
Turn on the touchpad. For instructions on how to adjust
the touchpad settings, see Changing mouse, touchpad,
or pointing device settings in your online User Guide.
The pointer moves unexpectedly
Clean the touchpad with a damp cloth (water only) and
wipe it dry.

Adjust the touchpad settings. For instructions on how to

adjust the touchpad settings, see Changing mouse,
touchpad, or pointing device settings in your online
User Guide.

Video
The projector, monitor, or television is not working
Make sure that you have pressed FN+F4 to activate the
external monitor option.
Make sure that the monitor is turned on and that the
video cable is connected correctly.

Telephone support
Before calling Gateway Customer Care
If you have a technical problem with your notebook, follow
these recommendations before contacting Gateway Customer
Care:
Make sure that your notebook is connected correctly to
a grounded AC outlet that is supplying power. If you use
a surge protector, make sure that it is turned on.

138

www.gateway.com

If a peripheral device, such as a keyboard or mouse, does

not appear to work, make sure that all cables are

plugged in securely.
If you have recently installed hardware or software,
make sure that you have installed it according to the
instructions provided with it. If you did not purchase the
hardware or software from Gateway, see the
manufacturers documentation and technical support
resources.

If you have how to questions about using a program,

see:
Online Help
Printed documentation
The Microsoft Windows documentation
The software publishers Web site
See the troubleshooting section of this chapter.
Warning
To avoid bodily injury, do not attempt to troubleshoot your
notebook problem if:
Power cords or plugs are damaged
Liquid has been spilled into your notebook
Your notebook was dropped
The case was damaged
Instead, unplug your notebook and contact a qualified computer
technician.

Have your customer ID, serial number, and order number

available, along with a detailed description of your

problem, including the exact text of any error messages,
and the steps you have taken.
Make sure that your notebook is nearby at the time of
your call. The technician may have you follow
troubleshooting steps.
The label on the bottom of your notebook includes the
Gateway Customer Care telephone number. For more
information, see Gateway contact information on
page 2.

139

CHAPTER 9: Troubleshooting

140

APPENDIXA
Legal Information

Important safety information

Regulatory compliance statements
Environmental information
Notices

141

APPENDIX A: Legal Information

Important safety information

Warning
Always follow these instructions to help guard against personal injury and
damage to your Gateway system.

Warning
Do not use Gateway products in areas classified as hazardous locations.
Such areas include patient care areas of medical and dental facilities,
oxygen-laden environments, or industrial facilities.

Warning
To reduce the risk of fire, use only No. 26 AWG or larger (for example, No.
24 AWG) UL-listed or CSA-certified telecommunication line cord for your dialup
modem connection.
Your Gateway notebook is designed and tested to meet the latest standards for safety of
information technology equipment. However, to ensure safe use of this notebook, it is important
that the safety instructions marked on the notebook and in the documentation are followed.

Setting up your system

Read and follow all instructions marked on the notebook and in the documentation
before you operate your notebook. Retain all safety and operating instructions for future
use.
Do not use this notebook near water or a heat source such as a radiator.
Set up the notebook on a stable work surface.
The notebook should be operated only from the type of power source indicated on the
rating label.
Openings in the notebook case are provided for ventilation. Do not block or cover these
openings. Make sure you provide adequate space, at least 6 inches (15 cm), around the
notebook for ventilation when you set up your work area. Never insert objects of any
kind into the notebook ventilation openings.
Some notebook are equipped with a three-wire power cord to make sure that the
notebook is properly grounded when in use. The plug on this cord will fit only into a
grounding-type outlet. This is a safety feature. If you are unable to insert the plug into
an outlet, contact an electrician to install the appropriate outlet.
If you use an extension cord with this notebook, make sure that the total ampere rating
on the products plugged into the extension cord does not exceed the extension cord
ampere rating.
If your notebook is fitted with a TV Tuner, cable, or satellite receiver card, make sure
that the antenna or cable system is electrically grounded to provide some protection
against voltage surges and buildup of static charges.

Care during use

142

Do not walk on the power cord or allow anything to rest on it.

Do not spill anything on the notebook. The best way to avoid spills is to avoid eating
and drinking near your notebook.
Some notebooks have a replaceable CMOS battery on the system board. There is a
danger of explosion if the CMOS battery is replaced incorrectly. Replace the battery with
the same or equivalent type recommended by the manufacturer. Dispose of batteries
according to the manufacturers instructions.
When the notebook is turned off, a small amount of electrical current still flows through
the notebook. To avoid electrical shock, always unplug all power cables and modem
cables from the wall outlets before cleaning the notebook.

www.gateway.com

Unplug the notebook from the wall outlet and refer servicing to qualified personnel if:
The power cord or plug is damaged.
Liquid has been spilled into the notebook.
The notebook does not operate properly when the operating instructions are
followed.
The notebook was dropped or the cabinet is damaged.
The notebook performance changes.

Replacement parts and accessories

Use only replacement parts and accessories recommended by Gateway.

Regulatory compliance
statements
Wireless guidance
Warning
Radio frequency wireless communication can interfere with equipment on
commercial aircraft. Current aviation regulations require wireless devices to be
turned off while traveling in an airplane. IEEE 802.11 (also known as wireless
Ethernet or WiFi), wireless Internet, and Bluetooth communication devices are
examples of devices that provide wireless communication.
Low power, Radio transmitting type devices (radio frequency (RF) wireless communication
devices), may be present (embedded) in your notebook system. These devices may operate in the
2.4 GHz (i.e. 802.11b/g LAN & Bluetooth), 5.2 GHz (i.e. 802.11a LAN), and traditional cellular or
PCS cellular bands (i.e. Cellular data modem). The following section is a general overview of
considerations while operating a wireless device.

Warning
In environments where the risk of interference to other devices or services
is harmful or perceived as harmful, the option to use a wireless device may be
restricted or eliminated. Airports, Hospitals, and Oxygen or flammable gas laden
atmospheres are limited examples where use of wireless devices may be
restricted or eliminated. When in environments where you are uncertain of the
sanction to use wireless devices, ask the applicable authority for authorization
prior to use or turning on the wireless device.

Warning
If your notebook came equipped with an internal embedded wireless
device, do not operate the wireless device unless all covers and shields are in place
and the notebook is fully assembled.

Caution
Wireless devices are not user serviceable. Do not modify them in any way.
Modification to a wireless device will void the authorization to use it. Please
contact Gateway for service.

143

APPENDIX A: Legal Information

Additional limitations, cautions, and concerns for specific countries are listed in the specific country
sections (or country group sections). The wireless devices in your system are only qualified for
use in the countries identified by the Radio Approval Marks on the system rating label. If the
country you will be using the wireless device in, is not listed, please contact your local Radio
Approval agency for requirements. Wireless devices are closely regulated and use may not be
allowed.
The power output of the wireless device or devices that may be embedded in your notebook is
well below the RF exposure limits as known at this time. Because the wireless devices (which may
be embedded into your notebook) emit less energy than is allowed in radio frequency safety
standards and recommendations, Gateway believes these devices are safe for use. Regardless of
the power levels, care should be taken to minimize human contact during normal operation.
Measurements have been performed to show that the RF exposure is below what is considered
safe limits; however care should be taken to make sure the user or bystanders keep the transmitter
away from their body when the wireless device is transmitting. The transmitting antenna installed
in the top third of the lid should be used in a manner to maintain 8 inches (20 cm) from users or
bystanders bodies.
The wireless devices installed in this system are intended to be used indoors. In some areas, use
of these devices outdoors is prohibited.
Some circumstances require restrictions on wireless devices.

Caution
Only use drivers approved for the country in which the device will be used.
See the Gateway System Restoration Kit, or contact Gateway Customer Care for
additional information.

Important
Every country has different restrictions on the use of wireless devices.
Since your notebook is equipped with a wireless device, when traveling between
countries with your notebook, check with the local Radio Approval authorities
prior to any move or trip for any restrictions on the use of a wireless device in
the destination country.

United States of America

Caution
Wireless devices are not user-serviceable. Do not modify them in any way.
Modification to a wireless device will void the authorization to use it. Contact
Gateway for service.

Caution
The transmitting device embedded in this notebook may not be used with
any antenna other than the one provided with the notebook.

Federal Communications Commission (FCC) Intentional

emitter per FCC Part 15
Low power, Radio transmitter type devices (radio frequency (RF) wireless communication devices),
operating in the 2.4 GHz band and/or 5.15 5.35 GHz band, may be present (embedded) in your
notebook system. This section is only applicable if these devices are present. Refer to the system
label to verify the presence of wireless devices.
Wireless devices that may be in your system are only qualified for use in the United States of
America if an FCC ID number is on the system label.

Caution
In order to comply with FCC requirements this transmitter must not be
operated (or co-located) in conjunction with any other transmitter or antenna
installed in the notebook.

144

www.gateway.com

The FCC has set a general guideline of 8 inches (20 cm) separation between the device and the
body, for use of a wireless device near the body (this does not include extremities). This device
should be used more than 8 inches (20 cm) from the body when wireless devices are on. The power
output of the wireless device (or devices), which may be embedded in your notebook, is well below
the RF exposure limits as set by the FCC.
The wireless devices installed in this system are intended to be used indoors. In some areas, use
of these devices outdoors is prohibited.
Operation of this device is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation of the device.

Unintentional emitter per FCC Part 15

This device has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio or television reception. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause
interference to radio and television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected
Consult the dealer or an experienced radio/TV technician for help.
Compliance accessories: The accessories associated with this equipment are: shielded video
cable when an external monitor is connected. These accessories are required to be used in order
to ensure compliance with FCC rules.

FCC declaration of conformity

Caution
Changes or modifications not expressly approved by Gateway could void
the FCC compliance and negate your authority to operate the notebook.

Caution
Recycle or dispose of the used notebook properly according to federal,
state and local laws.
Responsible party:
Gateway, Inc.
7565 Irvine Center Drive
Irvine, CA 92618
Phone: 800-846-2000

Product:

SA1
W350I
W650I
This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.

145

APPENDIX A: Legal Information

California Proposition 65 Warning

Warning
This product contains chemicals, including lead, known to the State of
California to cause cancer, birth defects or reproductive harm.

Mercury Warning
Hg Warning
THE LAMP IN THIS DISPLAY CONTAINS MERCURY. DISPOSE ACCORDING TO
LOCAL, STATE, AND FEDERAL LAW.

Telecommunications per Part 68 of the Code of Federal

Regulations (CFR 47) (applicable to products fitted with
USA modems)
Your modem complies with Part 68 of the Code of Federal Regulations (CFR 47) rules. On the
computer or modem card is a label that contains the FCC registration number and Ringer
Equivalence Number (REN) for this device. If requested, this information must be provided to the
telephone company.
A telephone line cord with a modular plug is required for use with this device. The modem is
designed to be connected to the telephone network or premises wiring using a compatible
modular jack which is Part 68-compliant. See installation instructions for details.
The Ringer Equivalence Number (REN) is used to determine the number of devices which may be
connected to the telephone line. Excessive RENs on a telephone line may result in the devices not
ringing in response to an incoming call. In most areas, the sum of RENs should not exceed five
(5). To be certain of the number of devices that may be connected to a line, as determined by the
total RENs, contact the local telephone company.
If this device causes harm to the telephone network, the telephone company will notify you in
advance that temporary discontinuance of service may be required. The telephone company may
request that you disconnect the equipment until the problem is resolved.
The telephone company may make changes in its facilities, equipment, operations, or procedures
that could affect the operation of this equipment. If this happens, the telephone company will
provide advance notice in order for you to make necessary modifications to maintain
uninterrupted service.
This equipment cannot be used on telephone company-provided coin service. Connection to party
line service is subject to state tariffs. Contact the state public utility commission or public service
commission for information.
When programming or making test calls to emergency numbers:
Remain on the line and briefly explain to the dispatcher the reason for the call.
Perform such activities in the off-peak hours such as early morning or late evenings.
The United States Telephone Consumer Protection Act of 1991 makes it unlawful for any person
to use a computer or other electronic device to send any message via a telephone fax machine
unless such message clearly contains, in a margin at the top or bottom of each transmitted page
or on the first page of the transmission, the date and time it is sent, an identification of the
business, other entity, or other individual sending the message, and the telephone number of the
sending machine or such business, other entity, or individual. Refer to your fax communication
software documentation for details on how to comply with the fax-branding requirement.

146

www.gateway.com

Canada
Industry Canada (IC) Intentional emitter per RSS 210
Caution
To prevent radio interference to licensed service or co-channel Mobile
Satellite systems, this device is intended to be operated indoors and away from
windows to provide maximum shielding. Equipment (or its transmit antenna) that
is installed outdoors is subject to licensing.
Low power, Radio transmitter type devices (radio frequency (RF) wireless communication devices),
operating in the 2.4 GHz band and/or 5.15 5.35 GHz band, may be present (embedded) in your
notebook system. This section is only applicable if these devices are present. Refer to the system
label to verify the presence of wireless devices.
Wireless devices that may be in your system are only qualified for use in Canada if an Industry
Canada ID number is on the system label.

Caution
Wireless devices are not user-serviceable. Do not modify them in any way.
Modification to a wireless device will void the authorization to use it. Contact
Gateway for service.

Caution
The transmitting device embedded in this notebook may not be used with
any antenna other than provide with the notebook.

Caution
The 802.11A radio LAN your notebook may have been equipped with
operates in the same frequency range as high power radar, which has priority
use, and may damage the radio LAN if both are present and being used in the
same area.
As a general guideline, a separation of 8 inches (20 cm) between the wireless device and the body,
for use of a wireless device near the body (this does not include extremities) is typical. This device
should be used more than 8 inches (20 cm) from the body when wireless devices are on. The power
output of the wireless device (or devices), which may be embedded in your notebook, is well below
the RF exposure limits as set by Industry Canada.
Operation of this device is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation of the device.

Unintentional emitter per ICES-003

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus as set out in the radio interference regulations of Industry Canada.
Le prsent appareil numrique nmet pas de bruits radiolectriques dpassant les limites
applicables aux appareils numriques de Classe B prescrites dans le rglement sur le brouillage
radiolectrique dict par Industrie Canada.

Telecommunications per Industry Canada CS-03 (for

products fitted with an IC-compliant modem)
The Industry Canada label identifies certified equipment. This certification means that the
equipment meets certain telecommunications network protective, operation, and safety
requirements. The Department does not guarantee the equipment will operate to the users
satisfaction.

147

APPENDIX A: Legal Information

Before installing this equipment, users should make sure that it is permissible to be connected to
the facilities of the local telecommunications company. The equipment must also be installed using
an acceptable method of connection. In some cases, the inside wiring associated with a single-line
individual service may be extended by means of a certified connector assembly. The customer
should be aware that compliance with the above conditions may not prevent degradation of
service in some situations.
Repairs to certified equipment should be made by an authorized Canadian maintenance facility
designated by the supplier. Any repairs or alterations made by the user to this equipment, or
equipment malfunctions, may give the telecommunications company cause to request the user
to disconnect the equipment.

Warning
To avoid electrical shock or equipment malfunction do not attempt to
make electrical ground connections by yourself. Contact the appropriate
inspection authority or an electrician, as appropriate.
Users should make sure, for their own protection, that the electrical ground connections of the
power utility, telephone lines, and internal metallic water pipe system, if present, are connected
together. This precaution may be particularly important in rural areas.
The Ringer Equivalence Number (REN) assigned to each terminal device provides an
indication of the maximum number of terminals allowed to be connected to a telephone interface.
The termination on an interface may consist of any combination of devices subject only to the
requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed 5.

Japan

Japanese Modem Notice

Laser safety statement

Warning
Use of controls or adjustments or performance of procedures other than
those specified in this manual may result in hazardous radiation exposure. To
prevent exposure to laser beams, do not try to open the enclosure of a CD or DVD
drive.

148

www.gateway.com

All Gateway systems equipped with CD and DVD drives comply with the appropriate safety
standards, including IEC 825. The laser devices in these components are classified as Class 1 Laser
Products under a US Department of Health and Human Services (DHHS) Radiation Performance
Standard. Should the unit ever need servicing, contact an authorized service location.

Environmental information
The product you have purchased contains extracted natural resources that have been used in the
manufacturing process. This product may contain substances known to be hazardous to the
environment or to human health.
To prevent releases of harmful substances into the environment and to maximize the use of our
natural resources, Gateway provides the following information on how you can responsibly recycle
or reuse most of the materials in your end of life product.
Waste Electrical and Electronic Equipment (commonly
known as WEEE) should never be disposed of in the
municipal waste stream (residential garbage
collection). The Crossed-Out Waste Bin label affixed
to this product is your reminder to dispose of your end of life product properly.
Substances such as glass, plastics, and certain chemical compounds are highly recoverable,
recyclable, and reusable. You can do your part for the environment by following these simple steps:
When your electrical or electronic equipment is no longer useful to you, take it back
to your local or regional waste collection administration for recycling.
In some cases, your end of life product may be traded in for credit towards the
purchase of new Gateway equipment. Call Gateway to see if this program is available
in your area.
If you need further assistance in recycling, reusing, or trading in your end of life
product, you may contact us at the Customer Care number listed in your products user
guide and we will be glad to help you with your effort.
Finally, we suggest that you practice other environmentally friendly actions by understanding and
using the energy-saving features of this product (where applicable), recycling the inner and outer
packaging (including shipping containers) this product was delivered in, and by disposing of or
recycling used batteries properly.
With your help, we can reduce the amount of natural resources needed to produce electrical and
electronic equipment, minimize the use of landfills for the disposal of end of life products, and
generally improve our quality of life by ensuring that potentially hazardous substances are not
released into the environment and are disposed of properly.

149

APPENDIX A: Legal Information

Notices
Copyright 2007 Gateway, Inc.
All Rights Reserved
7565 Irvine Center Drive
Irvine, CA 92618 USA

All Rights Reserved

This publication is protected by copyright and all rights are reserved. No part of it may be
reproduced or transmitted by any means or in any form, without prior consent in writing from
Gateway.
The information in this manual has been carefully checked and is believed to be accurate. However,
changes are made periodically. These changes are incorporated in newer publication editions.
Gateway may improve and/or change products described in this publication at any time. Due to
continuing system improvements, Gateway is not responsible for inaccurate information which
may appear in this manual. For the latest product updates, consult the Gateway Web site at
www.gateway.com. In no event will Gateway be liable for direct, indirect, special, exemplary,
incidental, or consequential damages resulting from any defect or omission in this manual, even
if advised of the possibility of such damages.
In the interest of continued product development, Gateway reserves the right to make
improvements in this manual and the products it describes at any time, without notices or
obligation.

Trademark Acknowledgments
Gateway and the Black-and-White Spot Design are trademarks or registered trademarks of
Gateway, Inc. in the U.S. and other countries. Intel, Intel Inside logo, and Pentium are registered
trademarks of Intel Corporation. Microsoft, MS, and Windows are trademarks or registered
trademarks of Microsoft Corporation. All other product names mentioned herein are used for
identification purposes only, and may be the trademarks or registered trademarks of their
respective companies.

Macrovision statement
If your notebook has a DVD drive and an analog TV Out port,
the following paragraph applies:
This product incorporates copyright protection technology that is protected by U.S. patents and
other intellectual property rights. Use of this copyright protection technology must be authorized
by Macrovision Corporation, and is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is
prohibited.

150

Index
A
AC adapter
connecting 18
connector 10
international adapters 70
accessories
purchasing 63
safety precautions 143
acoustic handset coupler 78
airplane power adapters 63
application key 27
arrow keys 27
audio
adjusting volume 30, 45
back button 29, 40
headphone jack 6
microphone jack 6
muting 30, 41, 45
next button 29, 40
pause button 29, 40
play button 29, 40
stop button 29, 40
troubleshooting 137
volume down button 30
volume up button 30
audio CD
cleaning 87
inserting 53, 54
automobile power adapter 63,

extending life 86
fuel gauges 86
icons 66
installing 67
latch 11
life span 86
locating 11
managing power 69
maximizing performance
69

monitoring charge 66
purchasing 64
recalibrating 68
recharging 18, 66
release latch 11
replacing 67
storing 86
troubleshooting 135
bays
battery 67
hard drive 11
memory 11, 103
BIOS Setup utility 68
Bluetooth
system key 29
turning off 29, 49
turning on 29, 49
brightness
adjusting 29, 30, 44
system keys 30
70
broadband modem
connecting 20
B
button
Effects 42
battery
Help 42
alternate power sources 70
Properties 42
bay 67
settings 42
calibrating 86
Snapshot 43
changing 67
Start camera 42
charge indicator 6, 66
buttons
charge status 66
multimedia panel 12
charging 18, 66
conserving power 69

151

Index

C
cable lock 10
cable modem 7, 20
connecting 20
troubleshooting 127
camera
See digital camera
See digital video camera
Camera Assistant 43
Camera Assistant Toolbar 42
Capacitive volume control 41
Caps Lock indicator 25
cards
Express Card slot 8
inserting Express Card 57
inserting memory card 56
memory card slot 7
memory cards supported
55

removing Express Card 57

removing memory card 56
slots 55, 57
troubleshooting Express
Card 119
troubleshooting memory
card 127
carrying case 64
CD
cleaning 87
controlling playback 29, 40
eject button 53, 54
inserting 53, 54
manual eject hole 53, 54
CD drive
See DVD drive
cellular phone
memory cards 55
Certificate of Authenticity 3
changing
battery 66
cleaning
audio CD 87
case 85
CD 87
DVD 87

152

keyboard 85
LCD panel 85
notebook exterior 84
screen 85
clicking 38
closing unresponsive program
24

connecting
AC adapter 18
cable modem 20
dial-up modem 21
DSL modem 20
external keyboard 26
external monitor 59
keyboard 26
mouse 38
printer 58
projector 59
scanner 58
television 59
to wired Ethernet 20
USB device 58
video camera 59
connections
audio 6
broadband Internet 7, 20
cable modem 7, 20
dial-up modem 10, 21
digital camera 7, 9
DSL modem 7, 20
Ethernet 7
external audio 6
external diskette drive 7, 9,
58

external speakers 6
flash drive 7, 9, 58
HDMI (TV) out 7
headphone 6
keyboard 7, 9
microphone 6
modem (dial-up) 10
monitor (VGA) 10, 60
mouse 7, 9
network 7
power 10, 18
printer 7, 9
projector 60

www.gateway.com

scanner 7, 9
speaker 6
television 59
USB 7, 9, 58
VGA 10, 60
wired Ethernet 20
wired network 20
copyright notice 150

D
default printer 136
dialing codes 78
dial-up modem 10, 21
adjusting volume 130
diagnostics 129
dialing properties 128
troubleshooting 127
using while traveling 78
digital audio 58
digital camera
memory card reader 7, 55
USB port 7, 9
digital video 58
digital video camera
connecting 59
directional keys 27
disc drive indicator 25
diskette
troubleshooting 115
diskette drive
troubleshooting 115
display
brightness 44
switching 28
troubleshooting 116
display properties
adjusting 61
documentation
User Guide 2
double-clicking 38
dragging 39
drivers
recovery discs 89, 93
re-installing 88

drives
DVD 52
DVD/CD-RW 9, 52
DVDRW 9, 52
hard drive 11, 107
HD DVD 52
HD-DVD RW 9
identifying drive types 52
multi-format DVDRW 9, 52
replacing hard drive 107
status indicators 25
troubleshooting 115, 117,
120

types 52
DSL modem 7, 20
connecting 20
troubleshooting 127
DVD
cleaning 87
controlling playback 29, 40
eject button 53, 54
inserting 53, 54
manual eject hole 53, 54
playing 59
regional code 53
troubleshooting 117
DVD drive
drive status indicator 25
identifying 52
locating 9
troubleshooting 117
using 52
DVD player program 40
DVD/CD-RW drive
See DVD drive
DVDRW drive
See DVD drive

E
Effects button 42
eject button
CD 53, 54
DVD 53, 54
eject hole
CD 53, 54
DVD 53, 54

153

Index

electrostatic discharge (ESD)

102

EmPower power adapter 70

ergonomics 16
Ethernet
connecting wired 20
jack 7, 20
Express Card
adding 57
inserting 57
installing 57
removing 57
slot 57
troubleshooting 119
external monitor 10, 28
EZ Pad touchpad
See touchpad

F
fan 8
faxes
troubleshooting 129
files
opening 38
transferring 79
troubleshooting 119
fingerprint
enrolling 32
fingerprint reader
control center 34
locating 13
password bank 35
troubleshooting 120
tutorial 31
using 31
Fn key 27, 28
folders
opening 38
function keys 27

G
Gateway
contact information 2
model number 3

154

serial number 3
Support 3
Gateway Recovery Center
re-installing drivers 91
re-installing programs 91
re-installing software 91

H
hard drive
bay 11
indicator 25
installing 107
purchasing 64
replacing 107
troubleshooting 120
HDMI (TV) out jack 7
HDMI port 28, 58, 59
headphone jack 6
Help button 42
Hibernate mode 23, 71
hot-swapping 57, 58
Hybrid Sleep
mode 28, 71
system key 28
turning on 74

I
IEEE 802.11
using while traveling 79
indicators
See status indicators
inkjet printer 64
installing
battery 67
devices 58
digital camera 58
digital video camera 58
Express Card 57
hard drive 107
memory 103
peripheral devices 58
printer 58
scanner 58
Instant on Audio 40

www.gateway.com

Instant on Video 40
Internet
troubleshooting 121
Internet chat program 41

J
jacks
See connections

K
Kensington cable lock 80
lock slot 10
key combinations 28
keyboard
buttons 26
cleaning 85
connecting 26
features 26
keys 26
locating 12
troubleshooting 122
USB port 7, 9
keys
application 27
arrow 27
brightness 30
directional 27
Fn 27, 28
function 27
Hybrid Sleep 28
LCD brightness 30
LCD/CRT 28
navigation 27
numeric keypad 27
Sleep 28
system 27
system key combinations
28

toggle display 28
Windows 27
wireless Ethernet 28

L
labels
Customer Care 11

Microsoft Certificate of
Authenticity 3
model number 2
serial number 2
laser printer 64
latch
battery 11
LCD panel
cleaning 85
switching display 28
troubleshooting 116
LCD/CRT system key 28
line protector 78
line tester 78
lock
cable 80
Kensington cable 10

M
maintenance
cleaning 84, 87
Media Center 40
troubleshooting 123
media reader
See memory card reader
memory
bay 11
installing 103
purchasing 64
removing 103
replacing 103
troubleshooting 126
memory card reader
inserting card 56
locating 7
memory cards supported
55

removing card 56
troubleshooting 127
using 55
microphone
built-in 14
jack 6
Microsoft Certificate of
Authenticity 3

155

Index

model number 3, 80
modem
cable 7, 20
connecting 20, 21
dial-up 21, 78
DSL 7, 20
international adapter 78
jack (dial-up) 10, 21
troubleshooting 127
monitor
adding external 59
color quality 62
port 10
screen resolution 62
troubleshooting external
138

using 28
using external 62
mouse
connecting 38
troubleshooting 130
USB port 7, 9
moving
pointer 38
screen objects 39
MP3 player
memory cards 55
multimedia
adjusting volume 45
using DVD drive 52
multimedia panel 12, 40
mute button 30, 41
muting sound 30, 41, 45

N
navigation keys 27
network
troubleshooting 131, 133
network jack 7, 20
networking
turning off Bluetooth 49
turning off wireless
Ethernet 47
turning on Bluetooth 49
turning on wireless

156

Ethernet 47
NTSC/PAL jack 59
Num Lock
status indicator 25
system key 27
numeric keypad
status indicator 25
using 27

O
opening
files 38
folders 38
programs 38
shortcut menu 39

P
packing notebook 78
password 80, 135
startup 80
supervisor 80
user 80
password bank 35
PCMCIA card
See Express Card
PDA
memory cards 55
peripheral devices 58
Plug and Play devices
USB support for 58
pointer
identifying 37
moving 38
ports
See connections
power
AC adapter 18, 70
advanced settings 72, 74
alternate sources 70
automobile/airplane
adapter 70
battery 66, 67, 68, 69
button 12, 28
changing modes 71
changing plans 72

www.gateway.com

connector 10, 18
conserving battery power
69

EmPower adapter 70
extending battery life 69
Hibernate mode 71
Hybrid Sleep mode 28, 71
indicator 6, 23
international adapter 81
management 65, 69
plans 72
Sleep mode 23, 28, 71
source problems 19
SpeedStep settings 72
status indicator 6
surge protector 19
troubleshooting 135
turning off notebook 23
turning on notebook 21
power adapters
airplane 63
automobile 63
printer
default 136
inkjet 64
installing 58
laser 64
troubleshooting 136
USB port 7, 9
programs
closing unresponsive 24
opening 38
recovery discs 89, 93
re-installing 88
projector
adding 59
color quality 62
port 10
screen resolution 62
troubleshooting 138
using 28, 62
Properties button 42

R
radio approval authorities 79
radio frequency wireless

connections 79
RAM
See memory
rebooting notebook 24
recalibrating battery 68
recharging battery 66
recovering
defaults 98
drivers 88
programs 88
software 88
system 87
Windows 88
with Gateway Recovery
Center 91
with Windows DVD 99
with Windows System
Restore 95
recovery discs
creating 89
drivers 89, 93
programs 89, 93
software 89, 93
using 93
Recycle Bin
deleting files 120
emptying 120
regional code
DVD 53
re-installing
defaults 98
drivers 88
programs 87, 88
software 87, 88
Windows 87, 88
with Gateway Recovery
Center 91
with Windows DVD 99
with Windows System
Restore 95
replacing
See installing
resetting notebook 24
restarting notebook 24
restoring

157

Index

defaults 98
drivers 88
programs 88
software 88
system 87
Windows 88
with Gateway Recovery
Center 91
with Windows DVD 99
with Windows System
Restore 95
right-clicking 39

S
safety
avoiding repetitive strain
17

caring for notebook 84

general precautions 142
guidelines for
troubleshooting
114

posture 17
reducing eye strain 16
setting up computer 17
sitting at computer 17
static electricity 102
scanner
installing 58
USB port 7, 9
screen
resolution 62
troubleshooting 116, 138
screen objects
getting information 39
moving 39
selecting 38
scroll zone 37
security
startup password 80
while travelling 80
security features
Kensington cable lock 10
serial number 3, 80
setting up
safety precautions 142

158

Settings button 42
shipping notebook 78
shortcut menus
accessing 39
shortcuts
opening menu 39
shutting down notebook 23, 24
Sleep
mode 23, 28, 71
system key 28
Snapshot button 43
SO-DIMM
See memory
software
recovery discs 89, 93
re-installing 88
sound
adjusting 30, 45
controls 45
muting 30, 41, 45
troubleshooting 137
speakers
built-in 12
jack 6
SpeedStep technology 72
Start camera button 42
starting
notebook 21
programs 38
startup password 80
static electricity 102
status indicator
wireless Ethernet 25
status indicators
battery charge 6, 66
Caps Lock 25
CD drive 25
disc drive 25
drive activity 25
DVD drive 25
hard drive 25
location 13
numeric keypad 25
Pad Lock 25
power 6

www.gateway.com

toggle on or off 28, 137

troubleshooting 137
supervisor password 80
surge protector 19
Suspend 28
switch
wireless network 8
system identification label 3
system keys
combinations 28
locating 27

display 116
DVD drive 117
Express Cards 119
external monitor 138
faxes 129
files 119
general guidelines 114
hard drive 120
Internet connection 121,
129

keyboard 122
LCD panel 116
Media Center 123
memory 126
memory card reader 127
modem 127
mouse 130
network 131, 133
passwords 135
power 135
printer 136
projector 138
safety guidelines 114
screen 116, 138
screen area 116
screen resolution 116
sound 137
status indicators 137
technical support 138
telephone support 138
touchpad 138
video 138
Web site connection speed

technical support
Support 3
tips before contacting 138
telephone
acoustic handset coupler 78
line protector 78
line tester 78
telephone support 138
television
HDMI out jack 7, 59
playing DVD on 59
viewing display on 59
touchpad
buttons 37, 38
clicking 38
double-clicking 38
dragging screen objects 39
locating 12
122
moving pointer 37, 38
wired Ethernet 131
moving screen objects 39
wireless Ethernet 133
opening files, folders, and
wireless network 133
programs 38
opening shortcut menu 39 turning off
Bluetooth 29
right-clicking 39
notebook 23, 24
scroll zone 37
wireless Ethernet 47
selecting screen objects 38
wireless network 8, 29
troubleshooting 138
turning
on
travel tips 77
29
Bluetooth
troubleshooting
notebook
21
audio 137
wireless Ethernet 28
battery 135
wireless network 8, 28, 47
diskette drive 115

159

Index

TV out (HDMI) jack 7, 59

U
upgrading 101
USB
connecting device 58
port 58
USB port 7, 9
user password 80

V
ventilation 8
VGA port 10, 60
video
HDMI out jack 7
monitor port 10
projector port 10
troubleshooting 138
VGA port 10
video camera
connecting 59
volume
adjusting 30, 45
adjusting modem 130
controls 45
muting 30, 41, 45
system keys 30
troubleshooting 137

W
waking up notebook 23
webcam 14, 41
Webcam status indicator 14
Windows
key 27
Product Key Code 3
Windows Hotstart 40
Windows Media Player 40
Windows System Restore 88
creating restore point 97
wired Ethernet
troubleshooting 131
wireless Ethernet
button 28

160

status indicator 25
troubleshooting 133
turning off 47
turning on 47
using while traveling 79
wireless network
switch 8
troubleshooting 133
working safely 16

MAN AVAL/TRITON/TEMP HW REF R1 8/07