Scribd
Upload
95 views

10ME Theory

The document describes the Solvay process for the continuous production of sodium bicarbonate. Key steps include: 1) Saturating a sodium chloride solution with ammonia and carbon dioxide to precipitate sparingly soluble sodium bicarbonate and ammonium chloride. 2) Filtering and washing the sodium bicarbonate. 3) Calcining the sodium bicarbonate to produce sodium carbonate and recover carbon dioxide for reuse.

Uploaded by

alfipincuk
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
95 views

10ME Theory

The document describes the Solvay process for the continuous production of sodium bicarbonate. Key steps include: 1) Saturating a sodium chloride solution with ammonia and carbon dioxide to precipitate sparingly soluble sodium bicarbonate and ammonium chloride. 2) Filtering and washing the sodium bicarbonate. 3) Calcining the sodium bicarbonate to produce sodium carbonate and recover carbon dioxide for reuse.

Uploaded by

alfipincuk
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

MATERIAL FOR EXPERIMENT NO.

10

Continuous process of sodium bicarbonate production by


Solvay method
based on: Podrcznik do wicze z technologii chemicznej (Ed. T. Kasprzycka-Guttman),
Wydawnictwa UW, Warszawa 1996.
translated by Tomasz Pawowski
1. General information.
Sodium carbonate (commonly called as soda ash or washing soda) is the primary
product of the chemical industry since the year one. It was used in antiquity for the
manufacture of soap and glass, using the mineral appears in some lakes of Africa, Asia and
North America being a natural soda, so-called trona (Na2CO3NaHCO32H2O). In Europe, the
most important was the soda ash produced in Spain, Normandy and Scotland from the ashes
of some marine plants. With the development of industry as well as many wars causing
restrictions on trade demand for other methods of producing soda ash grew very rapidly, so
that in 1755 the French Academy of Sciences announced a competition for the economical
method of producing soda ash from sodium chloride. Only 45 years later, in 1790 the French
physician Nicholas Leblanc developed method for satisfying this requirement. His method has
been used for over 120 years. Economic considerations supported by modern, for those days,
of technical solutions led to new method developed by Ernest Solvay. This method was used
for the first time in 1865 in a chemical factory in Belgium Couillet. Leblanc method was
completely supplanted by Solvay method which remains to this day, despite the existence of
significantly modified its variants, the main means of production of soda ash (about 80% of
total production in the world).
It should be mentioned that due to economic and technical aspects plants producing
soda ash also produces: caustic soda (NaOH), sodium bicarbonate (NaHCO3), crystalline soda
(Na2CO310H2O) as well as other products such as CaCl2, CaCO3 and dry ice (CO2).
The use of soda in different forms mentioned above is very broad. About 30% is used
in the manufacture of various inorganic salts such as: borax, sodium sulphite, sodium oxalate,
sodium dichromate or sodium nitrate. Soda is used among others in the industry: glass, steel,
metal, paper and leather, dyes, rubber, food (approximately 30%) and soap industry and
washing powders (about 20%).
2. The process of obtaining soda ash.
The process of obtaining soda ash is, in short, the secretion of a solution composed of
water, sodium chloride, ammonia and carbon dioxide sparingly soluble salt of sodium
bicarbonate (NaHCO3), but remains in solution of ammonium chloride (NH4Cl). The order of
combining the substrates is as follows: to the saturated aqueous solution of sodium chloride is
introduced ammonia, and later in the stage of carbonization the carbon dioxide. The resulting
ammonium bicarbonate (NH4HCO3) reacts with NaCl to give sparingly soluble NaHCO3 and
1

soluble ammonium chloride (NH4Cl). The separated sodium bicarbonate is subjected to


heating (calcination) and transformed to soda ash and secreted CO2 is recycled to the process.
With NH4Cl solution ammonia is recovered by adding to a solution of slaked lime (Ca(OH)2)
and resulting CaCl2 solution is largely a waste product. As follows from the balance,
stoichiometric equation basic raw materials for the production of soda ash are: sodium
chloride and calcium carbonate:
2NaCl + CaCO3 Na2CO3 + CaCl2
In Poland, both of these salts are present in large quantities as the main components of rock
salt and limestone.
At various stages of the process consists of the following physical and chemical
changes:
1.

Preparation of a saturated aqueous solution of sodium chloride:


NaCl + H2O

2.

Thermal decomposition (calcination) of limestone to carbon dioxide and calcium oxide


(burnt lime):
CaCO3 CaO + CO2

3.

Preparation of brine solution saturated with ammonia:


NaCl + H2O + NH3

4.

The saturation of the resulting solution with carbon dioxide (carbonization). The reaction
proceeds in the following stages:
2NH3 + CO2 + H2O (NH4)2CO3
(NH4)2CO3 +H2O + CO2 2NH4HCO3
then the resulting ammonium bicarbonate reacts with sodium chloride:
NaCl + NH4HCO3 NaHCO3 + NH4Cl

5.
6.

Filtering and washing the precipitated sodium bicarbonate.


Calcination received NaHCO3 to Na2CO3:
2NaHCO3 Na2CO3 + H2O + CO2

7.

Regeneration of ammonia from the solution after the separation of NaHCO3:


2NH4Cl + Ca(OH)2 2NH3 + CaCl2 + 2H2O
used in this reaction of Ca(OH)2 comes from the next reaction:

8.

Receipt of slaked lime:


CaO + H2O Ca(OH)2

As you can see from the above reactions constantly circulating component during
production the soda ash is ammonia and it should be to supplement the losses arising from
this material, whose size depends on the method of conducting the process.
In the step (1) is produced a saturated solution of sodium chloride by leaching using
water, salt bed. Brine used for production of soda ash should have a concentration of
approximately 300 - 315 g NaCl/l, contain as little as SO3 ions and be free of Ca and Mg ions.
Too high concentration of Ca and Mg ions leads to a reduction in the quality of the final
product. Reducing the concentration of magnesium is obtained by precipitation of magnesium
ions in the form of magnesium hydroxide in the reaction of milk of lime (suspension of
calcium hydroxide particles in water):
Mg2+ + Ca(OH)2 Mg(OH)2 + Ca2+
Calcium ions are precipitated by treating a brine with solution of soda ash:
Ca2+ + Na2CO3 CaCO3 + 2Na+
Step (2) refers to the unit operation known as the limestone burning. Limestone used
in this technology should be of high purity (SiO2 < 3%, Fe2O3/Al2O3 < 1.5%). As a result,
carbon dioxide is obtained which is used for the carbonization process (step (4)) and calcium
oxide used for the recovery of ammonia (step (7)). The operation is being performed in a socalled lime kilns at a temperature of about 1100 C. The second product, so called burnt lime
(CaO) is subjected to the process of the reaction with water (step (8)). This process is carried
out in such a way to get a thick slurry of Ca(OH)2 in water (so-called milk of lime).
Step (4) is an essential stage of the production of soda ash. In most modern
installations the carbonization is carried out in the counterflow of carbonating columns. The
process is carried out at 50 - 60 C. It should be pointed that there are different views on the
mechanism of carbonization, but commonly expressed view is that the summary equation:
NaCl + NH4HCO3 NaHCO3 + NH4Cl
is the result of several intermediate reactions presented above. Efficiency of carbonization
process depends largely on the composition of the crude product precipitating in carbonating
columns. And this obviously depends on the solubility equilibrium of these salts. From the
perspective of physico-chemical analysis these four salts form a typical configuration of a two
3

reciprocal salt pairs, that is, those within which there is no common ion. In such a system is
stable the pair, whose solubility equilibrium is smaller. For the temperature of post-reaction
slurry leaving the carbonating column, solubility equilibrium of NaHCO3 + NH4Cl pair is
lower than the solubility equilibrium of NaCl + NH4HCO3 pair.
Step (6) is the calcinations of the resulting of NaHCO3. Besides the main reaction:
2NaHCO3 Na2CO3 + H2O + CO2
there are three side reactions of substances accompanying of sodium bicarbonate:
NH4HCO3 NH3 + CO2 + H2O
(NH4)2CO3 NH3 + CO2 + H2O
NaHCO3 + NH4Cl NH3 + CO2 + H2O + NaCl

Exemplary block scheme of soda production by Solvay method:

You might also like