Scribd
Upload
234 views2 pages

Question Paper: Ee2207 Electron Drvices and Circuits Laboratory

This document outlines 15 experiments to be performed in an Electronics Drives and Circuits Laboratory course. The experiments include obtaining characteristics of diodes, zener diodes, bipolar junction transistors, DIACs, JFETs, UJT, SCR, TRIACs, photodiodes, and thermistors. Additional experiments include constructing full wave and half wave rectifiers, and measuring the frequency response of series resonant, parallel resonant, low pass, and high pass filters. Students will analyze the results of each experiment to determine values like static and dynamic resistance, cut-in and zener voltages, hybrid parameters, and bandwidth and cut-off frequencies.

Uploaded by

Nathan Swanson
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
234 views2 pages

Question Paper: Ee2207 Electron Drvices and Circuits Laboratory

This document outlines 15 experiments to be performed in an Electronics Drives and Circuits Laboratory course. The experiments include obtaining characteristics of diodes, zener diodes, bipolar junction transistors, DIACs, JFETs, UJT, SCR, TRIACs, photodiodes, and thermistors. Additional experiments include constructing full wave and half wave rectifiers, and measuring the frequency response of series resonant, parallel resonant, low pass, and high pass filters. Students will analyze the results of each experiment to determine values like static and dynamic resistance, cut-in and zener voltages, hybrid parameters, and bandwidth and cut-off frequencies.

Uploaded by

Nathan Swanson
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

EE2207 ELECTRON DRVICES AND CIRCUITS LABORATORY

QUESTION PAPER
1. (a)Obtain the forward characteristics of a diode. From the characteristics estimate the
following i) Static and Dynamic resistance ii) Cut in voltage
(b)Obtain the forward and reverse characteristics of a zener diode. From the
Characteristics estimate the following i) Static and Dynamic resistance ii) Zener breakdown
voltage
2. With a suitable experiment obtain the input and output characteristics of a bipolar junction
transistor in CE Configuration and determine the hybrid parameters.
3. With a suitable experiment obtain the input and output characteristics of a bipolar junction
transistor in CB Configuration and determine the hybrid parameters.
4. (a)By a suitable experiment obtain the characteristic of a given DIAC.
(b)Study of CRO
5. With a suitable experiment obtain the characteristics of a Junction Field Effect Transistor.
From the characteristic determine the dynamic resistance, transconduction and amplification
factor.
6. (a)By a suitable experiment obtain the characteristic of a given UniJunctionTransistor and
from the characteristics estimate the intrinsic stand off ratio.
(b) Study the estimate the common mode rejection ratio of a differential amplifier
7. (a) By a suitable experiment obtain the characteristic of a given SCR.
(b) Study of light activated relay circuit
8. (a)By a suitable experiment obtain the forward and reverse characteristic of a given
TRIAC
(b) By conducting a suitable experiment obtain the static characteristics of a thermistor
9. By a suitable experiment obtain the characteristic of a given Photo diode and Photo
Transistor.

10. Construct a full wave rectifier and obtain and plot the following output waveforms
i) Full wave rectified waveform
ii) with capacitive filter
Compare the result by calculating the ripple factor

11. Construct a half wave rectifier and obtain and plot the following output waveforms
i) Full wave rectified waveform
ii) with capacitive filter
Compare the result by calculating the ripple factor
12. Conduct a suitable experiment to obtain the frequency response characteristics of a series
resonant circuit .calculate its bandwidth and resonant frequency and compare it with
practical value
13. . Conduct a suitable experiment to obtain the frequency response characteristics of a parallel
resonant circuit .calculate its bandwidth and resonant frequency and compare it with
practical value
14. Conduct a suitable experiment to obtain the frequency response characteristics of a low pass
filter. calculate its bandwidth and cut off frequency and compare it with practical value
15. Conduct a suitable experiment to obtain the frequency response characteristics of a high pass
filter. calculate its bandwidth and cut off frequency and compare it with practical value

You might also like