F T ra n sf o F T ra n sf o

PD rm PD rm
Y Y
Y

Y
er

er
ABB

ABB
y

y
bu

bu
2.0

2.0
to

to
re

re
he

he
k

k
lic

lic
C

C
w om w om
w

w
w. w.
A B B Y Y.c A B B Y Y.c
AutoCAD Self-paced Learning Modules
®

AutoCAD 2D
Module 11
Competency Test No.2

Learning Outcomes:
When you have completed this module, you will be able to:

1. Within a one hour time limit, complete a written exam and a lab exercise without the aid
of a key.

Competency Tests
The AutoCAD Self-paced Learning Modules are written as competency based modules. What
that means to you as a student is that you have not completed each module until you have
mastered it. To master a module, you must prove you understand the material contained in it
and complete the lab exercise(s) with 100% accuracy within the specified time limit.

In a Competency Test Module there are multiple choice questions and a comprehensive lab
exercise to test your mastery of the set of modules you just completed. There is no key
supplied with this module as it is meant to be checked by your instructor. If there are any parts
of this module that you have trouble completing you should go back after you complete it and
reread the modules containing the information you are having trouble with. If necessary, redo
the lab exercise(s) in that module(s).
Students attending this Course in a Classroom Setting
If you are a student completing this course in a classroom setting, your instructor will give you
instructions on what to do after you complete this module.
Students Completing this Course by Correspondence
Complete the following steps:
Step 1 Answer the 10 multiple choice questions on pages 11-2 to 11-3. Record the
answers.
Step 2 Complete Lab Exercise 11-1 on page 11-4.

Step 3 Login into the website www.cadinstructors.com with your name and ID number.
In the website, write the online written test for Module 11 - Competency Test No. 2.
It has the same 10 questions that you answered in Step 1.
Step 4 Attach the file AutoCAD 2D Lab 11-1.dwg to the test when you write it. Follow the
prompts when you are writing the test.
Step 5 If you have any problems completing Steps 1 to 4, ask your instructor for help.
Step 6 Go on to Module 12.

Competency Test No. 2 The CAD Guys Ltd. Copyright © 1993 - 2007 Module 11
 F T ra n sf o F T ra n sf o
PD rm PD rm
Y Y
Y

Y
er

er
ABB

ABB
y

y
bu

bu
2.0

2.0
to

to
re

re
he

he
k

k
lic

lic
C

C
w om 11 - 2 AutoCAD Self-paced Learning Modules - AutoCAD 2D - Revised 2007-04-11 w om
w

w
w. w.
A B B Y Y.c A B B Y Y.c

AutoCAD 2D
Competency Test Module No. 2
Open Book -1 Hour Time Limit

Part A Multiple Choice Questions

1. When you want to snap to the center point of a line, what object snap location would you
snap to?
A) Halfpoint
B) Center
C) Quadrant
D) Midpoint
E) Endpoint

2. What scale should you draw almost all objects in AutoCAD?

A) 1:50
B) 1:10
C) 1:2
D) Full Scale
E) You don't draw in scale in AutoCAD.

3. What is the name of the visual aid that helps you see and locate object snap modes more
efficiently?
A) Snapmode
B) AutoSnap
C) SnapAuto
D) AutoCADSnap
E) AutoMode

4 What coordinates are the best to set the lower left corner of the limits of the drawing?
A) 0,0
B) 2,2
C) 4,4
D) 6,6
E) 8,8

5. What is the smallest rectangle that will fit around all the existing objects in the drawing
called?
A) The drawing border
B) The drawing grid
C) The drawing mode
D) The drawing extents
E) The drawing size

Competency Test No. 2 The CAD Guys Ltd. Copyright © 1993 - 2007 Module 11
 F T ra n sf o F T ra n sf o
PD rm PD rm
Y Y
Y

Y
er

er
ABB

ABB
y

y
bu

bu
2.0

2.0
to

to
re

re
he

he
k

k
lic

lic
C

C
w om AutoCAD Self-paced Learning Modules - AutoCAD 2D - Revised 2007-04-11 11 - 3 w om
w

w
w. w.
A B B Y Y.c A B B Y Y.c

6. What command sets the number of sides that AutoCAD uses when it regenerates circles
and arcs?

A) VIEWRES
B) REGEN
C) CIRCLE
D) ARC
E) VIEW

7. What function key toggles AutoSnap?

A) F1
B) F2
C) F3
D) F4
E) F5

8. What is the name of the four object snap points located around a circle?

A) Center
B) Midpoint
C) Endpoint
D) Points
E) Quadrants

9 What does the polar coordinate @10<125 mean?

A) From the last point, go 12.5 units at an angle of negative 10 degrees

B) From the last point, go 10 units at an angle of negative 125 degrees
C) From the last point, go 125 units at an angle of positive 10 degrees
D) From the last point, go 10 units at an angle of positive 125 degrees
E) From the last point, go 125 units at an angle of negative 10 degrees

10. What polar coordinate would draw the same angle as @5<225?

A) @5<-125
B) @5<-225
C) @5<-135
D) @5<-145
E) @5<-165

Competency Test No. 2 The CAD Guys Ltd. Copyright © 1993 - 2007 Module 11
 F T ra n sf o F T ra n sf o
PD rm PD rm
Y Y
Y

Y
er

er
ABB

ABB
y

y
bu

bu
2.0

2.0
to

to
re

re
he

he
k

k
lic

lic
C

C
w om 11 - 4 AutoCAD Self-paced Learning Modules - AutoCAD 2D - Revised 2007-04-11 w om
w

w
w. w.
A B B Y Y.c A B B Y Y.c

Lab Exercise 11-1 Part B Open Book

Drawing Specifications
Name Template Units Text Style Font
AutoCAD 2D Lab 11-1 Module Template A4 Millimeters N/A N/A
Note: Color, Linetype, and Lineweight are all < ByLayer < unless otherwise instructed.
Layering Scheme
Objects on Layer Name Color Linetype Lineweight
Construction Objects Construction 253 Continuous N/A
All Objects Object Red Continuous N/A
Instructions:
1. Setup the layers using the Layering Scheme shown above.
2. Draw the object shown below using the layering scheme above.
3. Draw all construction objects on layer Construction.
4. Turn layer Key off and freeze layer Construction.
5. Save and close the drawing.

Completed
Drawing

Competency Test No. 2 The CAD Guys Ltd. Copyright © 1993 - 2007 Module 11