EF Smart door controller for time recorder

User Manual
EF 硬件用户手册 目录

Content

第一章 产品概述---------------------------------------------------------------1
Chapter one Product introduction
主要功能特点---------------------------------------------------------------1
Main function features
主要技术参数---------------------------------------------------------------2
Main technical parameter
外形结构说明---------------------------------------------------------------3
Structure description
EF 快速索引-------------------------------------------------------------4
EF fast index
第二章 产品安装---------------------------------------------------------------7
Chapter Installation
拆封清单---------------------------------------------------------------------7
Package list
安装 EF ------------------------------------------------------------------7
Install EF
开机运行---------------------------------------------------------------------8
Operation
第三章 设置系统--------------------------------------------------------------11
Chapter 3 system
时钟管理--------------------------------------------------------------------11
clock
卡片管理--------------------------------------------------------------------11
card
系统设置--------------------------------------------------------------------11
system system
EF 硬件用户手册 目录

门禁管理--------------------------------------------------------------------12
door
端口设置--------------------------------------------------------------------18
port
菜单语言--------------------------------------------------------------------19
menu language
短消息-----------------------------------------------------------------------19
short message
姓名和工号-----------------------------------------------------------------19
Name and work number
附录 A 接口和扩展信号------------------------------------------------------21
Appendix A Port and extended signal
附录 B 权限示意--------------------------------------------------------------23
Appendix B Authority description
附录 C 潜回互锁示意--------------------------------------------------------24
Appendix C A.P.B description

Statement: The manufacturer reserves the right to change the

technology and specification without notice in advance.
Warning: Do not repair EF privately. Our company disclaims
any liability for the consequence from this.
EF 硬件用户手册 产品概述

Chapter one Production introduction

E F - M “E M l f” i ni s i n t e g r awt iet dh t i rme ec o r, d P e rW D d o o r
c o n t r o l l e r , s i n g l e - d o o r c o n t r ow
l l iet rh,C h
r ei na ed seer c h a r a c t e r
d i s p l aa yn dd o u b l e d o o r c o n t r o l l e r . I t i s w i d e l y u
controller, time recorder, real-time patrol and parking lot etc.

1. Main function features

1) All-purpose and wide application
 T h ep r o d u c t i ni st e g r a w t ei d
th PWD keyboard, reade
Ch ine se , si ng le doo r co ntro ll er, t ime record e
d o o r c o n t r o l lo ep rt . i oI ont fai lsb u t a
t on ndn o b u t t o n ,
computer white and champagne color. The product is a new-
generation production with high performance rate
meet various customers’ demand.
2) Advanced technology, stable and reliable.
 A l l i n p u t a n d o u t p u t p o t s c a
s t a t ai nc d p o w e r . I t h a s s t r o n g a n t i - i
and has powerfa il urere si sti ng de sigThe n. PCB bo ard ha s
m o i s t u r e p r o o f a n d c o r r o s i o na np dr co at en c at idoanp t t o
different rough whether.
3) Dynamic definition, flexible application
 O n eb u i l d - i n c a r d r e a d e r ( E M o r M i f a r e ) , t w o s e t s o
i nterface, t wo sets of sen so r in pu t, two se ts o f b utto n i npu
t wo sets o f r e l a y o u t p u t, on e se t o f b e l l p or t a n d o n e se t o
RS485 communication interface.
 R e- d e f i n teh e I O i n t e r f a c e . F o r e x a m p l e , W 2 6 p o r t w i
defined as W26 standard output or input, the relay ca
defined as door controller, bell or alm output, the sensor can
be defined as fire alm signal.
 Support hardware updata on-line

1
EF 硬件用户手册 产品概述

4). Chinese-English menu, easy application

 C h i n e s e - E n g l i s h M ewn iut hlpi og rhttd, i s p l at yh e o w n’se r
name and work number.
 Issue public short message and personal short message
 1 6 a l m t i m e s a r e a v a i lTahbel ea .l m s u p p o r t s w o r k i n g d a y
setting
 T he cl ock mo d i f i cat i o n p a r a me te r ca n e n su re th e co rr e cti o
of time for a long time.
 It can b en etworked
( s a m 255a a ets b i o t ost)
It c an c omplete
t p s he b arameter
k w i i etting
off-line.
5) Professional door controller, powerful function
 Door control: 2 doors, standard wiegand 26 interface. It can
connect with world famous reader such as HID and Motorola.
 S u p p o r2t 5 0 0 c a r d h o l d earnsd s t o r e 2 5 0 0 0 p i e c e s o f c a r d
reading information and alm events.
 32 time periods/64 time sets/16 application groups/8 types of
holidays/validity period for card/card PIN (6 numbers)
 The p roduct
has t l wo o ayers
A and m utuall
f .P.Bw ock t hen
hardware is off-line. (Open only one door for each time)
 Only PIN, only card and card & PIN areavailable. It can also
support duress PIN and super PIN.
 Soft c ontrolo a d f various ny a lmincidents
oor, f unctions:o pe
time-out, close time-out, intrude alm, force alm, burglar a
and fire alm etc.
2. Main technical parameter
Working voltage AC/DC 8~25V
Power <1W
consumption

2
EF 硬件用户手册 产品概述

Data saving >10 years (after power failure)

Total rec 25000 pieces (adjustable)
Card control 2500 pieces (adjustable)
LCD resolution 122×32 DOTS
B u- i i l n d 16×16
w o national
r d class two character base.
base
Communication One RS485
mode
Wiegand 26 port Two
Relay output Two
State input Four
C a rr ed a EMd compatible
i n gor Mifare
type
Induction 4—15cm
distance
Networking 255 sets
capacity
Working -20℃—70℃
temperature
Working 20%—90%
humidity
Storage -25℃—85℃
temperature
Dimension L120×W88×H 18mm
Weight 160克 160g

3. Structure description

3
EF 硬件用户手册 产品概述

1 6

2
7
3

8
4

1、Liquid crystal display 6、rear patch

2、indicator 7、port
3、keyboard 8、installation hole
4、card induction area
5、bell button

4
EF 硬件用户手册 产品概述

4. EF fast index
1) Display icon index
Icon Meaning
 Current option
 There i s si ome f nformation
p
< 9 > to review.
 There is some information above, p
< 7 > to review.
 There is no chosen item in the check box.
 There is chosen item in the check box.
 Th e r e i s n o c h o s e n ir taedmi o i n t
button.
 T h e r e i s c h o s e n i t e m
button.

2) Keyboard function index

Key Function
< 0 >< 1 >< 2> Number input
< 3 >< 4 >< 5 >
< 6 >< 8 >
<7> Number input
Up
<9> Number input
Down
<*> Cancel the operation
Return to the high-authority menu
E s c a pm
e ultiple choice or single cho
and save the choice.
<#> Confirm the operation

5
EF 硬件用户手册 产品概述

Enter into the submenu

Menu_Main
Choose multiple choices or single choice.
|—clock

3) Main menu index:

| |—set time
| |—adj time
| | |— adj not
| | |— adj fast
| |— adj slow
| |
| |—alm
| | |—alm 01->
| | | |—enable
| | | |—alarm
| | | |—delay
| | | |—weekset  Sun Mon… Sat

| | | 。
| | | 。
| | |— alm 16->
| | | (Ditto)
| Card
| |—add card
| |—update card
| |—Del card
|
|—system
| |—Model ID
| |—light mode—NC、NO、Auto、time zone
| |—beep hint—keys、 clock、 hints,
| |—baud rate—2400bps、4800bps、9600bps、19200bps
| |—Rec option— in rec、 out rec、 event rec、 cycle、 sameness、 tot alarm、5-digit
| |—menu PWD
| |—Sys info
| |—clear…
| |—updata…
|—door
| |—DR 1
| | |—authority
| | | |—timer—(0-31)
| | | |—time zone—(0-63)
| | | |—holiday
| | | |—APPset—( 0-15)
| | |——control mode in and out、 only in、 any out 、A.P.B.
| | |—entry mode— only card、 only PIN、 card &PIN
| | |—sensor type— sensor NO、 sensor NC、 fire NO、fire NC、 null
| | |—button—NO、NC、null
| | |—open time
| | |—close time
| | |—first NO— ON、 OFF
| | |—duress PIN
| | |—access PIN| |
| |—DR 2
| | (Ditto)
| |— DR 1->2
| |— DR 2->1
|—port
| |—relay 1— lock 1、 lock 2、 bell、 alm 、 null
| |—relay 2— lock 1、 lock 2、 bell、 alm 、 null,
| |——W26 port 1 in 1、 out 1、 in 2、 out 2、 W26 out 、 null,
| 6
|—W26 port 2— in 1、 out 1、 in 2、 out 2、 W26 out 、 null
| |—Local reading— in 1、 out 1、 in 2、 out 2、null
|—Language— Chinese，English
EF 硬件用户手册 产品概述

Operation index for common keys

go menu
Press < *>a < nd ( f #> t <*>
< s irst,
a a theni #>
state to enter into the menu state.
Menu browse
The menu is in tree structure. In some submenu, <7> and <9>
a r e u s e d t o c h o o tshee i t e m s u p a n d d o wTnh. e c h o s e n i t e m
w il l be i n whi t e d i sp l a y ( wh i t e l e t te r o n a b l a ck g ro u n d ). Pr e s
<#> key to fix the item setting and press<*> to cancel the item
s e t t i n g a n d r e t u r n t o t h e h i g h - a u t h o r ti thye smyesnt eu m
. will
automatically escape from the menu and res
interface.

Multiple choices and single choice

<7> key is to review upward, <9> key is to review downward; <#>
key is to choose multiple choices or single choice; < * > key is to
escape themultiplechoice or single choice and save the choice
result.
PIN entry —Applied to the Access PIN or Duress PIN
Press < a t#> initial st tateand he t hes creen
d t pisplays t h
e n t e r t h e P W DEn. t e r t h e P W D ( f r o m < 0 > t o < 9 > ) , a n d p r e s
<#> key to confirm.
PWD update——Applied to the card & PIN
Read card and press the valid PWD , then press <*> and <#>
q u i c k l y, r e a d c a r d a g a i n a t t h e s i g h t o f
the new PWD two times. The PIN update successful
is . (Default
PWD is: 888888)

7
EF 用户手册 产品安装

Chapter 2 Installation
Proper installation can ensure the normal
chapter makes a detailed descriptionof installationfor EF smart
time recorder’s hardware and software.

1. Package list
EF master engine, one piece of software CD, 5 connection lines.
The manufacturer reserves the right to make
to the above-mentioned items without notice in advance.
2. Installation
1) EF assembly figure:

Installation fixed hole

Dismount hole

N o t e : A f t e r t h e e q u i p m e n t i s o n p o w e r, t h e s y s t e m c
reset through the side cover dismount slot .
2) Networking with the control computer
E F p r o v i d e s R S 4 8 5 n e t w o r k i n g m o d e . T
d i s t a n c e i s 1 2 0 0 m . I t c a n bme a uc sh ei ondr e f o r

8
EF 用户手册 产品安装

m u l -m t ia pc l hce i o n me m u n i c a t i o n a n d n
converter to connect with com Sep eu t d
eer.t a i l ecdo n n e c t i oi n
“Appendix A”.
2.1.1 RS485
The c onnection
i s a f s 2 hown I n R s igure
c o n v e r t e r t o c o n n e c t R S 4 8 5 p o r t E( FJ P 1t i m o re J P
recorder. It is advisable to set the terminal resistance of 120Ω, for
the long distance will results in great signal consumption.

Figure 2-2 RS485 single networking

.2 Multiple networking
T h e c o n n e c t i o n i s s h o Th w ne ams u lf ti ig pu l
n e t w o r ki n g r e a l i ze s b y t h e co n n e ct i o n w i t h o n e i n a n d t h e o t h
out of JP1 and JP2 (JP1 and JP2 can be exchanged). P
refer to the figure. The terminal should connect with the terminal
resistance of 120Ω. And its total distance is limited to 1200m.

9
EF 用户手册 产品安装

Figure 2-3 RS485 multiple networking

4) Operation
C o n n e c t E Fw i t hp o w e r, t h e s y s t e m w i l l rTehseest .y s t e m
will check after a“beep”. If the systme is normal, the screen is in
the initial interface.
Note: EF won ’t accept the card reading if it is menu setting
or manage the computer’s continutal communication.

10
EF 用户手册 设置系统

Chapter 3 System
This chapter mainly introduces how to set the system of EF time
recer. There two ways are valaiable: keyboard and operating EF
controlsoftware.
1.Clock
Menu_Main
|—clock
| |—set time
| |—adj time
| | |— adj not
| | |— adj fast
| | |— adj slow
| |
| |—alarm
| | |—alm 01->
| | | |— enable
| | | |—alarm
| | | |—delay
| | | |—weekset— Sun、 Mon 一… Sat
|
| | |—alm 16->

Set time
After a long time operation, the system’s time may be incorrect.
So it is necessary to adjsut the time. (the time is in 24 Hours
fomat. )
The set information display is shown as the right figure.
12:00:00
August 1, 2003

Adj time
This is used to adjust the time automatically to minimize the
error after a long time operation.
 Adj not——no system adjustment
 Adj fast——the right figure displays after
entering and then enter the adjustment value., Adjust fast
00 (second/day)

11
EF 用户手册 设置系统

-
 Adj slow——the right figure displays after entering and then enter
adjust slow
the adjustmetn value. 00 (second/day)

Alarm
The user can set 16 alm times at most (alm 01—alm 16). Each
alm time should cover following aspects:
 enable —hook-like mark means starting. If not, it means closing.
Press < # > to cycle trigger.
Alm time—input alm time
Delay —the delay for alm
weekset-it can choose in which days it alm s.

2. Card
Menu_Main
|—card
| |—add card
| |—update card The card includes: add, update and delete.
| |—Del card

Wait reading card

..
Add card: The right figure - -- is shown after entering. To get

the “card” by stamping card. If the card to be added is not valaible

at your hand, press < # > and enter the card directly. See the right
Please enter card PIN
figure. 00000000

The system will be in the authority distribution port after the card
being acquired. See the right figure. Group 1 00 group 2 00
validity period : 99-12-
Group 1—corresponding to the APPset of 31 DR 1
Group 2-- corresponding to the APPset of DR 2
Validity period—All authority of the card is invalid after the period.
Note: the new added card’s default PWD is “888888”. The user
can update it on the keyboard. Please refer to “PWD update” part.
Update card: It is necessary to update the authority of the card
12
EF 用户手册 设置系统

having existed in the system. After entry, the operation is the same
as that of the above “add card”.
Delcard: to completely delete the card from the system.
3. System

Menu_Main
|—system
| |—Model ID
| |—Light mode— close、 NO、 auto、 time zone
| |—Beep hint— keys、 clock、 hints
| |—baud rate—2400bps、4800bps、9600bps、19200bps
| |—Rec option— in rec、 out rec、 event rec、 cycle、
 sameness、 tot alarm、5 digit
| |—menu PWD
|—Sys info
|—clear…
|—updata….

To set system parameter

Model ID
In the RS485 network, each equipment has its own series
number. We call this number Model ID. The EF support the Model
ID from 0-254.
Light mode
NC—backlight—directly close
NO—backlight—directly open
Auto—Open light when button pressing and card reading.
Automatically close the light when there is no such event.
time zone—Open the light in the set time zone.
Beep hint
keys---“beep” by pressing key.
alm —alm ing when alm triggers.
hints—sound when system events occur (such as: exterior reader
reading card)

Baud rate
13
EF 用户手册 设置系统

EF supports four kinds of baud rate such as 2400、4800、9600

and 19200. It can adapt to the RS485 networking communication.
Note: when the environmental interference and non-standard
communication lines damage the communication, the baud rate
should be reduced.
Rec option
In rec—recing in card reading
Out rec—recing out card reading
Event rec—including software open rec, PWD open rec, intrude
rec, fire alm rec, button rec, duress rec, and clear rec etc.
Cycle—to cover the oldest recwhen the reccapacity is full.
No sameness-not recorde the card reading of the same card in the
same site repeatedly in one minute.
capacity pre-alert--- it can trigger the alert after it being chosen. The
port is shown as follow. Set alm capacity 95%

5-digit card number--not choose default and read the 8-digit;

choose to read the 5 digit
Menu PWD

The PIN to entering into the main menu is made up of 6 digits at

most, Follows the steps shown below.
modify PWD modify PWD modify PWD
old PWD ****** new PWD ****** new password******

Firstly, enter the former valid PWD, then enter the new PWD two
times. The PWD update is successful. To lift PWD , just to enter no
number to the new PWD . When entering a number, press < * > to
clear it and press < # > to confirm.

Note: It is advisable to set PWD when it is used. (the default is

14
EF 用户手册 设置系统

empty)
Sys info
It is used to display rec of events, the number of registered card
00% rec00002
and occupied storage volume. 00% card 00000

Clear
It can clear the three following datas: system setting, card register
and event rec.
restore the default Del all cards Del all event rec
Confirm? Confirm? Confirm?

To clear according to the actual requirement. Press <#> to confirm

the clear, and press <*> to cancell the clear.
Updata
EF supports hardware updata on-line. The steps are shown as
follow:
1. EF communication port connects with computer by
RS485/RS232 converter.
2. When EF is in the updata standby state, the operation is shown
as follow: system ->updata.
Install “JS Updata tool for hardware” in the computer. Operate JS
Updata.exe, communication port should choose correct interface,
the baud rate is 19200, the updata file should be the xxxxx.upd
updata file provided by the manufacturer. When the updata starts,
progress bar indicates the course of updata. Please do not interrupt
the course. After the updata, terminal computer will reboot.
4. door

15
EF 用户手册 设置系统

Menu_Main
|—door
| |—DR 1
| |—authority
| | | |—timer—(0-31)）
| | | |—time zone—(0-63)
| | | |—holiday
| | | |—APPSet—(0-15)
| | |—control mode— in and out、only in、 any out 、 A.P.B.
| | |—entry mode— only card、 only PIN、 card &PIN
| | |—Sensor type— sensor NO、 sensor NC、 fire NO、fire NC、 null
| |—button—NO、NC、null
| | |—open time
| | |—close time
| | |—first NO— ON、 OFF -,
| | |—duress PIN
| | |—access PIN
| |—set DR 2
| | (Ditto)
| |—DR 1->2
| |—DR 2->1

EF supports double-door controller

Authority
Timer—support 32 time periods. See the right figure.
00:00 -> 00:00 00
00:00 -> 00:00 01 

timeset—support 64 time 31 00 00 00 00
31 00 00 00 01 
zones. See the right figure.

Holiday—pre-set holiday authority type in one

Year. See the right picture. Date: MM DD
Type: 00 (00-07)

APPSet—support 16 groups. The group mentioned in the card is

set here.
16
EF 用户手册 设置系统

See detailed authority structure in Appendix B about authority

description.
Control mode
In and out --in and out are strictly managed by the authority.
Only in—in is strictly managed by the authority. The out reader is
invalid.
Any out--- in is strictly managed by the authority and out just
reading card.
A.P.B---out by stamping card is valid only in the case of being in by
stamping card.
Entry mode
Card only ---verify the card’s authority.
PIN only---in by entering valid access PIN or duress PIN.
Card & PIN—verify the card’s authority and enter valid PWD.
Sensor type
Sensor NO—signal is in short circuit to the ground, which indicates
there is sensor signal. And the door opens.
Door NC—signal is in open circuit to the ground, which indicates
there is door switch. And the door opens.
Fire NO—signal is in short circuit to the ground, which indicates
there is fire signal. And it triggers the fire alm .
Fire NC—signal is in open circuit to the ground, which indicates
there is fire signal. And it triggers the fire alm .
Null----the signal is invalid.
Button
NO—signal is in short circuit to the ground, which indicates the
button is pressed.
NC---signal is in open circuit to the ground, which indicates the
button is pressed.
Null---signal is invalid.
17
EF 用户手册 设置系统

Open time
It is the duration of unlocking when going in normally. If the open
signal of sensor is founded during the time, the controller will close
the lock at once. Otherwise, the controller will close the lock till the
open time.
Close time
It is the time from door open to close. In another word, the time
from system detecting open signal to close signal is called close
time. If the close time is over the set value, the system will alm to
warn the user to close door.
Note: the above funtion is only available for door with sensor.
First NO
Within the set controltime of first group, if there is a normal and
valid open, the door will keep open till the controltime is up. For
example, the gate setting in the factory, it opens during working
time and closes after work.
Duress PIN
When the seized by burglar, the user can press the PWD to open
door. And the system will keep a duress event rec the monitor
computer will display the rec. If the setting is empty, the PWD is
invalid.
Access PIN
The PWD is used to open door directly. If the setting is empty, the
PWD is invalid.
Set DR 2
The operation is the same as the above.
DR 1->2
Copy all setting of DR 1 to the DR 2.
DR 2->1
Copy all setting of DR 2 to the DR 1.
18
EF 用户手册 设置系统

5. Port
Menu_Main
|—port setting
| |—relay 1— lock 1、 lock 2、 bell、 alm 、 null
| |—relay 2— lock 1、 lock 2、 bell、 alm 、 null
| |—W26 port 1— in 1、 out 1、 in 2、 out 2、 W 26 out、 null,
| |—W26 port 2— in 1、 out 1、 in 2、 out 2、 W26 out、 null,
| |—Local reading— in 1、 out 1、 in 2、 out 2、 null

The user can properly configurate the interfaces (relay, W26 port
and reader of the machine)provided by the system according to
their own application demand.
Relay 1
Lock 1---- linking with electric lock control of DR 1
lock 2—linking with electric lock control of DR 2
bell--- linking with alm control of alm
alm ---link with alm event (such as illegal intrude etc)
Null---signal is invalid.
relay 2: ditto

W26 port 1
In 1---the port connects with standard W26 reader and controls in of
DR 1.
Out 1---the port connects with standard W26 reader and controls
out of DR 1.
In 2---the port connects with standard W26 reader and controls in of
DR 2.
Out 2---the port connects with standard W26 reader and controls
out of DR 2.
W26 out---the card reading employs standard W26 out. Therefore,
EF can be used as reader.
Null---signal is invalid.
19
EF 用户手册 设置系统

W26 port 2
Ditto

Self reader
It is the same as W26 port 1, 2 except for the W26 output.
6. Language

Menu-Main
|—Language— Chinese、English
|

Chinese and English are optional.

7. Short message
The user can send some short word message (100 Chinese
characters or 200 English letters) to the LCD screen of EF , such
as: notice the company and advertisement etc. The system
displays the message on the screen. If it isn’t displayed in one line,
it is be displayed in roll. The message has two kinds: public
message and personal message. The public message will
automatically display on the screen if the sending time is valid.
While, the personal message is only displayed after the designated
card is stamped.
Note: The short message is only sent by the controlcomputer.
8 Name and work number
The name and work number of employee is sent to the time
recer by the controlcomputer. The name is made up of 8 English
letters or 4 Chinese characters at most, and the number is made up
of 11 English letters and digits at most.
Note: For EF , the name and number can be only sent by the
control computer.

20
EF 用户手册 设置系统

Appendix A Port and extended signal

Description for JP1 port signal

Terminal Signal Color Remark
1 +V red Positive power terminal
(+12DCV)
2 GND black Power ground
3 LS1 blue Relay output 1
4 LS1 purple
5 RS485+ yellow Positive RS485
communication
6 RS485- green Negative RS485
communication
7 BELL gray
8 BELL gray

Description for JP2, port signal

Terminal Signal Color Remark
1 +V red Positive power terminal
2 GND black Power ground
3 DATA0 green W26 data line
4 DATA1 white W26 data line
5 OP1 yellow Button 1
6 Mc1 orange Sensor 1

21
EF 用户手册 设置系统

Description for JP3 port signal

Terminal Signal Color Remark
1 DATA0 green W26 data line
2 DATA1 white W26 data line
3 OP1 yellow Button 2
4 MC2 orange Sensor 2
5 LS2 blue Relay output 2
6 LS2 purple

22
EF 用户手册 设置系统

23
EF 用户手册 设置系统

Appendix B authority description

Setting steps:
1. Set timer>> set Time zone>> set holiday >> set APPset 00-15.
2. Card -> add card or update card, set the validity period of the
card and distribute corresponding APPset to the two doors.

Authority

应用群组 00 门 1 群组号 个人密码 有效期

. . . 00——15
. . .
. . . 门 2 群组号
应用群组 15 00——15 卡片管理

应用群组 时区表 时段表

周安排 时区号 4 个时段号 序号 起始 终止 序号
星期日 00 00 00 00 00 00 00:00 ->00:00 00
星期一 00 . . . . . . . .
… . . . . . . . .
星期六 00 . . . . . . . .
00 00 00 00 63 00:00 ->00:00 31
假日类型
节假类 0 00
… 节假日 注：粗斜体数字
节假类 7 00 日期 类型 表示用户可设置
00 月 00 日 00
. . . 权限设置

应用群组案例：
例1
24 小时通行

应用群组 时区表 时段表

全部设为 00 00 00 00 00 00 00:00 ->23:59 00

例2
星期一 —— 星期五： 8:00——12:00 14:00——17:00 20:00——23:30
三段时间允许进入
星期六： 8:00——12:00 允许进入
星期日和节假日（如： 10 月 1 日）：全天不允许进入

应用群组 时区表 时段表

星期日 00 00 00 00 00 00 00:00 ->00:00 00
星期一 01 01 02 03 00 01 08:00 ->12:00 01
星期二 01 01 00 00 00 02 14:00 ->17:00 02
星期三 01 20:00 ->23:30 03
星期四 01
星期五 01
节假日
星期六 02 日期 类型
节假类 0 00 10 月 01 日 00

24
EF 用户手册 设置系统

Appendix C A.P.B description

Requirement 1. The one who enters by reading card is permitted be
out by reading card.
Setting steps
1. Port ->W26 port 1 (set as in 1)
->W26 port 2 (set as out 1)
2. DR 1 -> control mode (set as A.P.B)
Requirement 2. There is one entry and one exit in one parking lot.
The card reading is necessary when entering and going out the lot.
But the vehicle that isn’t registered by card reading in the entry is
forbidden to park in the lot.
Setting steps:
1. Port -> W26 port (set as in 1)
-> W26 port 2 (set in 2)
2. DR 1 -> control mode (set as A.P.B)
3. Set DR 2 -> control mode (set as A.P.B)

25