Dale R.

Labitzke, PE

Professional Chemical Engineering

http://www.born2process.com

PLANNING, SCHEDULING & PROJECT CONTROL

THE AIM OF PLANNING, SCHEDULING AND CONTROL

The completion date of a project is known. It is the market driven date conveyed
to the Project Manger and Task force by the Owner. Planning, scheduling, and

control is the art of preparing a plan that meets the completion date, scheduling

the individual tasks to support the plan, and reporting progress against schedule.

The aim of planning, scheduling and control is to show the Project Manager at all

times:

1. Precisely where the work stands, and where it should stand.

2. When delays occur, what must be done to offset them.

3. The cost of correcting delays, compared to the cost of drag-out that will

otherwise accrue.

4. The impact of delays and difficulties which occur on project completion,

start-up, production and the Owner's return on investment
5. The earliest practicable time that project completion and start-up can be

expected, if all goes well.

The terms "planning", "scheduling" will be encountered frequently. As applied to

Engineering and Construction projects:

1. "Planning" means determining what work must be done to achieve the

project objective and the relationships between the various activities.

2. "Scheduling" means deciding when the various activities will be carried

out.
3. "Control" means making full use of the tools provided by the scheduling

and monitoring operations and refers to the process of analyzing data,

investigating causes of backlog, determining solutions, comparing the cost

of these drag-out costs, and preparing specific recommendations to the

Project Manager.

Practical results of project control range from detecting errors in planning to

achieving better control over revisions in the engineer's shop, re-allocating

manpower from low priority to high priority tasks, pinpointing inadequate

supervision, inefficient labor, and approval bottlenecks, and eliminating effects of
delays on project completion. Control is the principle function of the Project

Controller, his planning, scheduling and measurement of progress being the

means by which he creates data necessary for the control function.

The presence of a Project Controller on a project does not in any way relieve any

individual Task Force member from the responsibility for planning day-to-day

work. This includes the assignment of tasks, the preparation of documents, the

detail preparations leading to efficient execution, inspection and review, all

directed towards the goals defined for his unit in the project schedule.

CONTINGENCIES

Under our method of project management, the Owner holds both the schedule
contingency and budget contingency in reserve. If problems are encountered,

the Project Manager informs the Owner of the problem, requests the use of

contingency, and justifies use of contingency over any other alternative.

PRELIMINARY PLAN AND SCHEDULE

It is assumed that a preliminary plan and schedule was prepared in the course of
defining the project for appropriation and are available as reference for detailed

project planning and control.

PROJECT DEFINITION

Usually the first planning task that confronts the Task force when starting a newly

funded project is to prepare a Project Definition. The purpose of the Project

Definition is:

1. To create common understanding and agreement among all concerned

regarding:

a. The project objective.

b. The principal tasks, operations and activities, which together must

be accomplished by the Task Force, by the Owner, and by others,

to achieve the objective.

c. The relationships between these activities and their effect on each

other and on the whole project.

d. The urgency of completion for the whole project and for each of its
components.

e. The division of responsibility for execution of various portions of the

project between the Task Force, the user Owner, and others.

2. To act as reference as to scope of work for that portion of the project

assigned to the Task Force and to control escalation (scope creep).

3. To establish in general terms the magnitude of the Task forces portion of

the work by describing the nature and extent of the engineering,

procurement, and construction work involved, and by pinpointing unusual

problems, limitations, major unresolved questions, and decisions

outstanding.

4. To act as the basis for the preliminary timetables, planning plan, detailed

planning, and reporting

To facilitate control, the project is divided into areas or portions based on

functional significance. Each portion or area is planned, scheduled and controlled

as a complete functional entity; each area must include the utilities, access

routes and other facilities needed to make it operable or useful as a functional

entity.

PLANNING PLAN, SCHEDULE AND BUDGET

On larger projects based on the number of areas to receive detailed attention

and the broad timings reflected in the Owners schedule, the Project Controller

prepares a Planning Plan and Timetable showing when detailed planning for

each area will take place and what additional assistance he will need for this. A

simple planning budget follows, based on salaries, expenses, data processing

and drafting assistance needed, supplies, etc. called for by the Planning Plan.

SOFTWARE AND PLANNING

The use of software to facilitate this function is strongly encouraged. At the time

of this writing, Primavera, Timberline, and MS Project Manager are known to be

comprehensive and easy to use software. Software is used to eliminate some of

the drudgery in planning operations. We recommend the software be used

generally as follows:

1. The project is broken down into functional areas and team agreement

obtained.

a. A network diagram is produced to describe the detailed steps

required to complete each functional area and team agreement

obtained.

b. Estimated work effort, estimated task duration, and resources

assigned to every step in every functional area and team

agreement obtained.

c. The network diagrams are then linked together at the most logical

points to form the project diagram
d. The project network diagram is converted to a project Gantt chart.

e. Resource leveling is applied and the completion date generated.

The completion date will probably be unacceptable.

2. At this point the Task Force has to decide how to manipulate the plan to:











a) Taking care of end to end Operational issues of the projects
b) Day to day coordination with the Contractors
c) Develops a cost-effective plan and schedule for completion of project following a logical pattern
for utilization of resources
d) Selects and coordinate work of Contractor / subcontractors working on various phases of the
project
e) Supervise team, review their reports, checks on any reported difficulties, and corrects any
safety violations or other reported deficiencies.
f) Track and control construction schedule and associated costs to achieve completion of project
within time and allocated budget
g) Build and maintain project schedule and financial reports


a) Excellent knowledge of project cost tracking and reporting
b) Excellent people skills; ability to maintain strong working relations with internal and external
clients
c) Eye to detail.