Scribd
Upload
192 views

RNC Admission Control

The document defines various cell parameters that control admission limits for different radio resources in 3G UMTS networks. Parameters include limits for asynchronous transfer mode (ASE) usage, compressed mode, code usage, power utilization, high speed downlink packet access (HSDPA) users, enhanced uplink (EUL) users for serving and non-serving cells, spreading factors for downlink and uplink, hardware usage, and maximum sessions for multimedia broadcast multicast service (MBMS) in preferred and non-preferred layer cells. The parameters help optimize radio resource utilization and control admission of new connections in the cell.

Uploaded by

UgyenKp
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
192 views

RNC Admission Control

The document defines various cell parameters that control admission limits for different radio resources in 3G UMTS networks. Parameters include limits for asynchronous transfer mode (ASE) usage, compressed mode, code usage, power utilization, high speed downlink packet access (HSDPA) users, enhanced uplink (EUL) users for serving and non-serving cells, spreading factors for downlink and uplink, hardware usage, and maximum sessions for multimedia broadcast multicast service (MBMS) in preferred and non-preferred layer cells. The parameters help optimize radio resource utilization and control admission of new connections in the cell.

Uploaded by

UgyenKp
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

aseDlAdm

Cell parameter that defines the absolute admission limit


for ASEs in the downlink.

aseUlAdm

Cell parameter that defines the absolute admission limit
for ASEs in the uplink.

compModeAdm

Cell parameter that defines the absolute admission limit for
the number of radio links in compressed mode in a cell.

dlCodeAdm

Cell parameter that defines the absolute admission limit for
downlink code usage.

pwrAdm

Cell parameter that defines the absolute admission limit for
downlink power utilization. It is relative to the
min( maximumTransmissionPower,maxDlPowerCapability), it
is expressed as a percentage and that is a percentage of
min.(maximumTransmissionPower,maxDlPowerCapability).

hsdpaUsersAdm

Cell parameter that defines the admission limit for the
number of users assigned to the HS-DSCH. Applicable to
admission requests related to RAB setup of anHSDPA service.

eulServingCellUsersAdm

Cell parameter that defines the admission limit for the
number of EUL users having the cell as serving cell.

eulNonServingCellUsersAdm

Cell parameter that defines the admission limit for the
number of EUL users having the cell as non-serving cell.

eulServingCellUsersAdmTti2

Cell parameter that defines the admission threshold for the
number of 2 ms TTI E-DCH users having this cell as serving
cell. Applicable at serving cell change, at RAB establishment
and at re-configuration to EUL.

sf8Adm

Cell parameter that defines the absolute admission limit for
the number of radio links with spreading factor = 8 in
downlink.

sf16Adm

Cell parameter that defines the absolute admission limit for
the number of radio links with spreading factor = 16 in
downlink for which new non-guaranteed admission requests
will continue to be allowed.

sf32Adm

Cell parameter that defines the absolute admission limit for
the number of radio links with spreading factor = 32 in
downlink.

sf16gAdm

Cell parameter that defines the maximum number of radio
links with spreading factor = 16 in downlink for which new
guaranteed admission requests will continue to be allowed.
Reaching or exceeding this number of radio links (any service
class) using downlink spreading factor = 16 will block
setup/adding any more guaranteed service class radio links
requiring additional downlink spreading factor = 16 in this
cell.

sf4AdmUl

Cell parameter that defines the absolute admission limit for
the number of radio links with spreading factor = 4 in uplink
(radio connection type PS384/HS).

sf8AdmUl

Cell parameter that defines the absolute admission limit for
the number of radio links with spreading factor = 8 in uplink.

sf16AdmUl

Cell parameter that defines the absolute admission limit for
the number of radio links with spreading factor = 16 in uplink.

sf8gAdmUl

Cell parameter that defines the absolute admission limit for
the number of radio links with spreading factor = 8 in uplink.

dlHwAdm

Parameter that defines the admission limit for the downlink
hardware usage in the cell group.

ulHwAdm

Parameter that defines the admission limit for the uplink
hardware usage in the cell group.

maxNumHsdpaUsers

Parameter that limits the maximum allowed number of
simultaneous HSDPA users per cell that can be served.

maxNumADchReservation

The maximum number of A-DCH resources that may be
configured in a baseband pool.

ulLicFractBbPool2

Parameter that defines the UL capacity of the second Base
Band Pool in percentage of licensed ULcapacity.

dlLicFractBbPool2

Parameter that defines the DL capacity of the second Base
Band Pool in percentage of licensed DL capacity

plSessionsMax

Parameter that defines the maximum number of
ongoing MBMS sessions in one Preferred Layer cell.

nonPlSessionsMax

Parameter that defines the maximum number of
ongoing MBMS sessions in one non-Preferred Layer cell.

You might also like