Scribd
Upload
306 views1 page

Norelem 03089

1) The document describes four forms (A, B, C, D) of locking bolts that differ based on whether they have a locking slot or nut. 2) It provides the specifications for locking bolts in steel with a hardened locking pin or stainless steel with a non-hardened pin. 3) Locking bolts are used to prevent changes in the locked position from lateral forces and require manual disengagement to set a new position.

Uploaded by

umaes
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
306 views1 page

Norelem 03089

1) The document describes four forms (A, B, C, D) of locking bolts that differ based on whether they have a locking slot or nut. 2) It provides the specifications for locking bolts in steel with a hardened locking pin or stainless steel with a non-hardened pin. 3) Locking bolts are used to prevent changes in the locked position from lateral forces and require manual disengagement to set a new position.

Uploaded by

umaes
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

204

Form A
without locking slot
without locking nut
Form B
without locking slot
with locking nut
Form C
with locking slot
without locking nut
Form D
with locking slot
with locking nut
03089
S

<

4
S

=

L
1
S

>

4

<

L
1
spacer ring
Locking bolts, short version, in steel, locking pin hardened
Order No. Order No. Order No. Order No. D D1 D2 L L1 L2 H SW1 SW2 F x 30 Spring force Spring force
Form A Form B Form C Form D initial pressure nal pressure
F1 approx. N F2 approx. N
03089-5004 03089-6004 03089-7004 03089-8004 4 M8x1 18 29,5 6 6 4 10 - / 13 / - / 13 1 6 12
03089-5105 03089-6105 03089-7105 03089-8105 5 M10x1 21 34,5 8 7 5 13 - / 17 / - / 17 1,3 5 12
03089-5206 03089-6206 03089-7206 03089-8206 6 M12x1,5 25 41,7 10 8 6 14 - / 19 / - / 19 1,8 6 14
03089-5308 03089-6308 03089-7308 03089-8308 8 M16x1,5 33 54 12 10 8 19 - / 24 / - / 24 2,3 14 28
03089-5410 03089-6410 03089-7410 03089-8410 10 M20x1,5 33 61 15 12 10 22 - / 30 / - / 30 2,8 15 32
Locking bolts, short version, in steel, locking pin not hardened
Order No. Order No. Order No. Order No. D D1 D2 L L1 L2 H SW1 SW2 F x 30 Spring force Spring force
Form A Form B Form C Form D initial pressure nal pressure
F1 approx. N F2 approx. N
03089-15004 03089-16004 03089-17004 03089-18004 4 M8x1 18 29,5 6 6 4 10 - / 13 / - / 13 1 6 12
03089-15105 03089-16105 03089-17105 03089-18105 5 M10x1 21 34,5 8 7 5 13 - / 17 / - / 17 1,3 5 12
03089-15206 03089-16206 03089-17206 03089-18206 6 M12x1,5 25 41,7 10 8 6 14 - / 19 / - / 19 1,8 6 14
03089-15308 03089-16308 03089-17308 03089-18308 8 M16x1,5 33 54 12 10 8 19 - / 24 / - / 24 2,3 14 28
03089-15410 03089-16410 03089-17410 03089-18410 10 M20x1,5 33 61 15 12 10 22 - / 30 / - / 30 2,8 15 32
Material:
- Steel version, locking pin hardened:
quality class 5.8.
- Stainless steel version, locking pin not hardened:
threaded sleeve 1.4305.
Locking pin 1.4305.
Mushroom knob in anthracite grey thermoplastic.
Surface nish:
- Steel version, locking pin hardened:
black oxide nish. Locking pin ground.
- Stainless steel version, locking pin not hardened:
natural nish. Locking pin ground.
Sample order:
nlm 03089-16206
Note:
Locking bolts are used to prevent any change in locking position due
to lateral forces. A new locking position can only be set after the bolt
has been manually disengaged. Form C or D is recommended for
applications in which gradual disengagement of the locking bolt is
desired, without any relocking of the locking pin.
On request:
Special versions.
Accessory:
Spacer rings 03089

Locking bolts
short version

You might also like