Geislinger Coupling

Geislinger Coupling
The Geislinger Coupling has proved its efficiency for
more than 50 years.
Especially where reliability and cost of ownership
are decisive factors, the Geislinger Coupling is your
first choice. Thus, leaders in marine propulsion, power generation, mining and the oil and gas industry
rely on Geislinger.
The Geislinger steel spring coupling can be combined with other Geislinger coupling solutions, such
as the Geislinger Flexlink or the Gesilco Couplings,
to cope with higher misalignment requirements.

Hardened, well lubricated surfaces

Tailor-made coupling for each

application

Fatigue-resistant springs

Description

Leaf springs transfer the torque and provide elasticity,

pressurized oil gives hydrodynamic damping.
Stiffness and damping can be pre-adjusted individually.
In this way the coupling is able to shift torsionally critical speeds and dampen torsional vibration. Resistant
to heat and oil, the Geislinger Coupling is perfectly
suitable for all types and sizes of machines but in particular diesel and gas engines. Using high-grade steel
and advanced design, the coupling provides constant
properties over the whole lifetime.
As not every engine can provide pressurized oil
supply, Geislinger has developed oil-filled and
spray-oil supplied steel spring couplings. Both implement the proven reliability of steel springs to
provide torque transmission and elasticity, but use
the oil mainly for lubrication.

Applications

Marine
Power generation
Mining
Oil and gas
Technical Data

Torque range: virtually unlimited torque

Twist at nominal torque: 50-300 mrad
Damping factor = 0.2 0.7
Maximum ambient temperature 140C
Virtually no speed limit
Advantages

Highest reliability
Lowest life-cycle cost
Tailored to your system
Precise calculation and defined properties
No aging
Longest time between overhauls
Compact, high power density
Geislinger After Sales Service worldwide

Preamble

This catalog replaces all old catalog versions.

The content of this catalog is indicative and - based on new developments -Geislinger
reserves the right to change the content without prior notice.
All duplication, reprinting and translation rights are reserved.
Should you have questions, remarks or inquiries please contact us per e-mail
([email protected]) or telephone (+43 662 66999-0).
The latest version of all Geislinger catalogs can be found on our website Geislinger.com.

Geislinger GmbH, 5300 Hallwang, Austria

Geislinger Coupling

Index

Description .................................................................................................................. 2
Designation ................................................................................................................. 7
Selection ...................................................................................................................... 8
Technical Data ........................................................................................................... 25

Couplings Series 45HC .................................................................................... 25

Couplings Series 45UC .................................................................................... 28

Couplings Series 75NC .................................................................................... 31

Couplings Series 75HC .................................................................................... 34

Couplings Series 75UC .................................................................................... 37

Couplings Series 120NC .................................................................................. 40

Couplings Series 120HC .................................................................................. 43

Couplings Series 120UC .................................................................................. 46

Dimensions ................................................................................................................ 49

Standard Coupling Type B ............................................................................... 49

Standard Coupling Type BC ............................................................................. 53

Standard Coupling Type BE ............................................................................. 57

Examples ................................................................................................................... 61

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

1 / 97

Geislinger Coupling

Description

Application
Geislinger Couplings are torsional elastic, high damping steel spring couplings with the
following advantages:

High damping

High elasticity

Longest life time

Low weight, small size

No aging

Low wear and maintenance

Indifferent to high temperatures, dirt and oil

Sound insulation

Suitable for high rotational speeds

Due to the increased power density of todays diesel and gas engines, more attention must
be paid to torsional vibration issues. In many cases it is now necessary to dampen torsional
vibrations and to move damaging natural frequencies out of the operating speed of the
drive system. The Geislinger Coupling is capable of solving both of these tasks. The
stiffness of the coupling leaf springs can be precisely tuned to isolate or move harmful
natural frequencies. In addition the Geislinger Coupling provides a unique hydrodynamic
damping, via oil displacement, which effectively absorbs torsional vibrations. These
torsional vibrations create stresses in the driveline system, dramatically shortening
component life and reliability. As a result, the Geislinger Coupling allows for continuous
operation within the operating speed range of the drive system. Incorporation of Geislinger
Couplings into a torsional system results in lower stresses for the engines crankshaft, all
other driven shafts and gears.
Geislinger Couplings not only meet the demands of any type and size of internal
combustion engine, but also the demands of all sorts of other machinery. Applications
such as pumps and compressors are typical examples.
Data collection from many research test beds and running installations has enabled precise
damping and spring stiffness (elasticity) requirements to be established. This guarantees
correct calculation of the critical speeds, amplitudes and loads in all parts of the system.
Damping and elasticity can be tailored within a wide range to meet the needs of any
installation.
Due to the fact that a Geislinger torsional elastic coupling has no axial stiffness, axial
vibrations cannot be transmitted from the prime mover to any components connected
after the coupling. Besides absorbing thermal expansion of the driving and driven shafts,
the coupling also permits parallel and angular misalignments.

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

2 / 97

Geislinger Coupling

Design
The classic Geislinger Coupling is a torsionally elastic, high damping coupling which uses
radially arranged steel spring packs. The coupling is essentially made of the same material
as that used for diesel engines and the associated driven components. The major
components for a standard design are shown in Fig. 1.
Fig. 1

side plate
inner star
end cover

spring pack
A,B oil chambers
Intermediate piece
clamping ring
flange

Stiffness
The steel spring packs represent the primary component of a Geislinger Coupling. The steel
spring packs can be produced to any degree of stiffness within a wide range. The spring
packs can be designed in many different ways. The standard design is the dual spring
design (See Fig.2). It should be noted that spring stiffness has no effect on the required
damping of a given system. The stiffness series, listed in this catalog, show a standard
progression for the dual spring design based on the requirements of most applications.
Technical data for other spring designs (See Fig.2) are available on request. If torsional
requirements dictate an unlisted spring stiffness, springs can be fabricated to the required
stiffness without additional lead-time or cost.

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

3 / 97

Geislinger Coupling

Damping
As mentioned earlier, the Geislinger Coupling has a very high damping factor.
The radially arranged springs are clamped at the outer diameter with their tips transmitting
torque / fitting in the grooves of the inner section, inner star. Cavities A and B are filled
with oil and are formed by the spaces between the spring packs, intermediate pieces and
inner star. (See Fig. 2)
Fig. 2

Classic spring design (N, H, U)

Dual spring design (NC, HC, UC)

K r

K r

A
B

Single spring design (NCS, HCS, UCS)

Multiple spring design (NC3, HC3, UC3)

K r = radial clearance

During torque transmission, the outer member rotates relative to the inner star and bends
the springs. This causes oil to be displaced from chamber A to chamber B via the gap K r .
Depending on the size of the gap K r , the oil flow is subjected to a resistance. This oil
flow resistance retards the movement of the outer coupling section and inner star, bringing
about the damping effect.
The non-dimensioned damping factor, (ratio between damping and elastic torque), is
generally valued between 0.2 and 0.7 for a Geislinger Coupling. This level of damping is
considerably higher than with a comparable elastomeric coupling.

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

4 / 97

Geislinger Coupling

Misalignment
Axial Misalignment
The Geislinger Coupling provides an axial displacement capacity due to a narrower width
of the spring pack in relation to the axial width of the inner star grooves. The difference in
spring pack / inner star groove widths enables the absorption of drive shaft changes in the
length due to thermal expansion. In addition, the couplings axial displacement capacity
enables installation and removal of the coupling without disassembly of the surrounding
components.
The values for axial displacement, mentioned in the technical data sheets that follow, are
guidelines that can be modified if needed.

Radial and Angular Misalignment

The radial and angular misalignment capacity of the coupling is determined by the size of
the gap K r . The resulting reaction forces are determined by the stiffness of the coupling
springs and are relatively small. Most importantly, no permanent deformation is occurring
during misalignment compensation. This is due to the fact that loads are absorbed
elastically by the spring packs. Misalignment values can be seen in the technical data tables
that follow.

Assembly
The coupling can be designed to connect to any conceivable assembly configuration. This is
due to Geislingers ability to fabricate any type of flange connection. Even in the most
difficult situations, assembly is possible through design adaptation.

Overload Capability
Due to the couplings design, the spring packs come in contact with the intermediate
pieces (Page 3 intermediate piece) at 1.4 times the nominal torque. This is referred to as
torque on buffer. The couplings standard design enables it to transmit transient shock
torques up to 3.25 times the nominal. With respect to marine applications, the
intermediate pieces can cause the coupling to act as a rigid coupling or "come home
device" if some spring packs are damaged.

Oil Supply
Whenever possible, the coupling is supplied with pressurized oil from the prime mover or
the driven machinery through a central bore. However, other means of oil supply are
possible. If no oil supply is feasible, the coupling can be oil filled. It should be noted that
couplings without pressurized oil supply provide lower damping rates.

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

5 / 97

Geislinger Coupling

Combination with other Geislinger Products

The Geislinger Coupling is frequently combined with other Geislinger products (i.e.
Geislinger Flexlink misalignment couplings, Damper, Gesilco misalignment couplings,
Flywheels, Bearing Housings and the Geislinger Monitoring system). Examples of these
combinations are shown later in the Examples section of the catalog.

Approval
All couplings are produced and certified in accordance with the quality assurance
requirements of DIN/ISO 9001 and DIN/ISO 14001. Geislingers Quality Assurance system
has been certified by all major classification societies.
Note: All couplings can be supplied with approvals of all the major classification societies.
Those classification society approvals do not require design alterations or compulsory spare
parts.
For survey by a classification society, Geislinger requests the following information:

Name of Classification Society

Shipyard

Yard number

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

6 / 97

Geislinger Coupling

Designation

Designation Code
In order to produce the couplings that are as small and cost effective as possible, couplings
are designed with the minimum number of springs required by the application for reverse
operation.

Non-Reversible Type NC
This design is used with non-reversible engines.

Semi-Reversible Type HC
The semi-reversible type can transmit a torque of 0.5 times the nominal torque TKN in
reverse direction.

Reversible Type UC
This design has a symmetric spring arrangement in the forward and reverse direction.
It is used for reversible engines. In the reverse direction, this coupling can transmit a torque
of 1.0 TKN .

The coupling designation has the following significance:

BC 90 / 15 / 75 NC / L
BC:
90:
15:
75:

type of connection flanges; for proposals see Part 'Dimensions' and 'Examples'.
Differing connection shapes and dimensions are possible on request.
outer diameter of centre part in cm
width of the spring pack in cm
stiffness series and the approximate twist in mrad at nominal torque.
The standard series are 45, 75, 120.
Other torsional stiffnesses are possible on request.

NC, HC, UC: Directionality Code for coupling type with dual spring design
NC
HC
UC

non-reversible
semi-reversible
reversible

L : informs on Left Hand Rotation

R : informs on Right Hand Rotation

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

7 / 97

Geislinger Coupling

Selection
Technical data for each coupling with dual spring design, depending on the outer diameter
of the spring housing section, width of the spring packs, stiffness of the spring packs and
directionality code for coupling type, can be selected from the technical data sheets that
follow. Technical data for the other spring designs are available on request.

Type NC, HC, UC

Geislinger Couplings are available for reversible engines with fixed propellers, nonreversible engines with reversible transmissions, or non-reversible engines with controllable
pitch propellers. The couplings can also be used for alternator sets. In order to transmit the
same nominal torque TKN the coupling size increase goes from a non-reversible to a semireversible to a reversible coupling. First, based on the application, it is necessary to
determine whether a reversible, semi-reversible or non-reversible coupling is required.
An example for the different nominal torques TKN for the same coupling size with different
rotation type is:
90/15/75N

TKN = 215 kNm

90/15/75HC TKN = 170 kNm

90/15/75UC TKN = 170 kNm

Please see pages 14 - 16 for the limits of permissible elastic vibratory torques of each
coupling type.

Nominal Torque TKN

The mean torque T is calculated from the engine power P and rotational speed n

T 9.55
T
P
n

P
n

mean torque
engine power
rotational speed

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

kNm
kW
min-1

Coupling Catalog Version 17.6

8 / 97

Geislinger Coupling
The coupling size should be selected so that the coupling's nominal torque TKN is greater
or equal to the mean torque T specified by the prime mover / application.

TKN T
It is not recommended or necessary to choose a coupling that is oversized.

Stiffness Series
Three different stiffness series are listed in this catalog. For special applications, where the
torsional vibration calculation proves it to be necessary, custom stiffnesses can be produced
with no additional lead-time or cost. To transmit the same nominal torque, a larger overall
size is required for a softer coupling (series 120) than for a stiffer coupling (series 45).
Following numbers illustrate the dependence of the nominal torque T on the choice of
stiffness for the same coupling size:

90/15/45HC TKN = 281 kNm

90/15/75HC TKN = 170 kNm
90/15/120HC TKN = 104 kNm

Initially, it is recommended that a stiff coupling is selected (series 45).

Confirmation that a selected stiffness is suitable for a given application can only be
obtained by performing a torsional vibration calculation. The calculation must use the
excitations of the total system and must be performed for all possible operating conditions
(normal operation, misfiring of one cylinder, etc.) and speeds.
For these calculations, it is necessary to use the given dynamic stiffness and damping factor
(Pages 10 - 12). Dynamic Stiffness and Damping factors both depend on the frequency of
the vibration considered.
From the analyses results, for instance the vibratory torques can be determined. These
consist of damping and elastic components and must be checked against the permitted
values as described in the following chapters.

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

9 / 97

Geislinger Coupling
Stiffness
For a Geislinger Coupling two types of stiffness are available:

Static Stiffness
Stiffness value at a static nominal torque. This is shown in the technical data sheets
as CTstat . For a Geislinger Coupling the static stiffness is practically constant.

Dynamic Stiffness
Under vibratory load, due to the displacement of oil, the coupling becomes stiffer. The
greater the frequency of the vibration, the stiffer the coupling becomes.

0 0 :

CTdyn CTstat 1 0.37

0 :

CTdyn CTstat 1.1 0.27

0

CTstat

static stiffness

CTdyn

dynamic stiffness MNm/rad

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

MNm/rad

Coupling Catalog Version 17.6

phase velocity of vibration

rad/s

0 characteristic cpl. frequency

rad/s

10 / 97

Geislinger Coupling

Damping
Conversion table for different damping values.

--

C
2

k
C

2 k
C

C2 k2 2
k

1
M 1
2

1
M 1
2

2
M 2 1

4 2 2

12

linear viscous damping

Nms/rad
undimensioned damping factor
ratio of damping energy

dynamic stiffness
Nm/rad
phase velocity of vibration rad/s
magnifier

Geislinger uses the undimensioned damping factor

Damping with pressurized oil supply
The hydrodynamic damping, due to restricted oil flow, depends on the phase velocity of
the vibration and the characteristic frequency of the Geislinger Coupling 0 < 9999
rad/s.

0.3
0

0.02 1.1

1
0

0 .2 0 .5

0 .3

undimensioned damping factor

phase velocity of vibration
characteristic frequency of the coupling

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

11 / 97

rad/s
rad/s

0 .7

Geislinger Coupling
Damping without pressurized oil supply (oil filled)
The damping of the oil filled Geislinger Coupling is mainly influenced by damping due to
friction, as the effect of hydrodynamic damping is very small. The characteristic frequency
0 is 9999 rad/s.
In general the damping at Tv TKN 0.3 can be calculated for all Geislinger Couplings by
the following formulas:
For the classic (multi-spring) design:

T
T
0.058 0.13 stat 0.11 stat
TKN
TKN

For the conical (dual-spring) design:

T
T
0.032 0.0069 stat 0.055 stat
TKN
TKN

Tstat

undimensioned damping factor

static torque kNm

Tv vibratory torque kNm

TKN nominal torque kNm

Additional information, damping formulas for any Tv TKN 0.3 and complete damping
tables for any Geislinger Coupling are available upon request
The value for the characteristic frequency 0 depends on the viscosity of the oil used.
Graphs and tables are usually valid for a viscosity of 40mm2/s. For other viscosities the
following formula applies:

0 0

40

oil viscosity

mm2/s

characteristic frequency

See page 21 for the characteristic frequencys 0

clearance K r .

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

12 / 97

rad/s

dependence on the radial

Geislinger Coupling

Permissible Elastic Vibratory Torque Tel

From a total vibratory torque Tv , which is transmitted by the coupling only the elastic
component Tel is important to be considered.

Tel Tv

C Tstat
C Tdyn

1 2

Tel
elastic vibratory torque
CTstat static stiffness

kNm
MNm/rad

Tv
vibratory torque kNm
CTdyn dynamic stiffness MNm/rad

undimensioned damping factor

This calculation has to be made for each harmonic order and the synthesis value has to be
derived.
Permissible elastic vibratory torques, for each coupling directionality type can be seen in
diagrams 1 - 3. The diagrams show: the limits for elastic vibratory torques, which
momentarily occur (e.g. transient condition), the limits for continuous permissible elastic
vibratory torques and the vibratory torque on buffer.

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

13 / 97

Geislinger Coupling

DIAGRAM 1 Type NC, Non-Reversible

Y

Tel
perm. elast . vibratory torque

TKN
nominal torque

T
mean torque

TKN nominal torque

0 X 1

Y 0.45 0.15 X

1 X 1 .3

Y 1.3 X

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

14 / 97

Geislinger Coupling

DIAGRAM 2 Type HC, Semi-Reversible

Y

Tel
perm. elast . vibratory torque

TKN
nominal torque

T
mean torque reverse

TKN nominal torque forward

Reverse

Forward

T
mean torque forward

TKN nominal torque forward

0 X 0. 5

Y 0 . 5 0. 3 X

0.5 X

Y 0

0 X 1

Y 0.5 0.08354 X 0.04432 X 2 0.07209 X 3

1 X 1.3

Y 1 .3 X

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

15 / 97

Geislinger Coupling

DIAGRAM 3 Type UC, Reversible

Y

Tel
perm. elast . vibratory torque

TKN
nominal torque

T
mean torque

TKN nominal torque

Reverse

Forward

0 X 1

Y 0.5 0.08354 X 0.04432 X 2 0.07209 X 3

1 X 1.3

Y 1 .3 X

0 X 1

Y 0.5 0.08354 X 0.04432 X 2 0.07209 X 3

1 X 1.3

Y 1 .3 X

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

16 / 97

Geislinger Coupling

Thermal Load PKW

Permissible values for thermal load in the coupling also have to be checked. The permitted
thermal load, shown in the catalog section Technical Data are valid for Perbunan O-rings
under condition of good air circulation and an ambient temperature 40 C. Thermal load
values can be doubled if Viton O-rings are used.
However, situations can arise where even these increased thermal load values can be
exceeded. For such elevated thermal loads, the coupling has to be force cooled in some
way (i.e. increased oil flow).
To obtain the thermal load PKW the following formula applies:

PKW
PKW
Tv
i
n

CTdyn

60

10 3

Tv 2 i n
( 1 2 ) CTdyn

thermal load
total vibratory torque due to harmonic order i transmitted by coupl.
harmonic order
speed of coupling
undimensioned damping factor
dynamic stiffness

kW
Nm
min-1
Nm/rad

The sign means that the thermal loads of all single orders are to be calculated separately
and then added up.

Required Oil Pressure in the Coupling

A minimum oil supply pressure is necessary to transmit the damping torque in the coupling
without cavitation.

p
p
Td
Td , p

Td
Td , p
required minimum oil pressure in the coupling
bar (absolute value, not gauge pressure)
the calculated damping component of the vibratory
torque in the coupling (a synthesis of all orders)
permissible damping vibratory torque per
1 bar oil supply pressure

kNm
kNm/bar

The oil supply can come from either the driving or driven machinery. Oil supply connections
can be made in accordance with the customers requirements.
Under certain conditions, if no oil supply is possible, the coupling can be prefilled (oil filled
coupling). In this case 0 = 9999 rad/s is valid.

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

17 / 97

Geislinger Coupling

Permissible Transient Shock Torques

The coupling can transmit transient shock torques up to the maximum torque. The
maximum transient torque is at least 3.25 times that of the nominal torque. It should be
noted that if the nominal torque is exceeded by more than 1.4 times the coupling is
approx. 10 times stiffer.
Greater shock torque values can be designed into the coupling, if required.
The ultimate torque is at least 8 times the nominal torque.
Fig. 3 shows the relationship between coupling twist (in mrad) and torque.
Fig. 3

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

18 / 97

Geislinger Coupling

Permissible Misalignment Values

It is also necessary to ensure that the permissible radial, axial and angular misalignment
capabilities of the coupling are not exceeded during operation.
If particularly high shaft misalignments or especially low reaction forces are required, the
coupling can be combined with a Geislinger Flexlink or with a Geislinger Gesilco coupling.
Axial Misalignment: Wa
An axial misalignment Wa is the deviation from the theoretical nominal length of the
coupling. This deviation in length is caused by axial displacements of the adjoining shafts.
Reasons for axial displacements include: errors in assembly distances, shaft movements,
variations in foundations (i.e. resiliently mounted engines) or thermal expansion.
K a is the maximum permissible axial misalignment capacity of the coupling and must not
be exceeded during operation. K a is determined by the sum of the static and dynamic
misalignments. Given values for K a can be modified, if required, by small adjustments in
design. Please contact Geislinger if additional axial misalignment capacity is necessary. As
an added benefit, the standard coupling design can be axially pushed together so that no
outside components need to be removed during assembly or disassembly.
Radial Misalignment: Wr
Radial misalignment Wr is the misalignment of the driving side to the driven side in a
direction perpendicular to the axis of rotation. The reasons for radial misalignment include:
errors in assembly alignment, shaft movements, variations in foundations (i.e. resiliently
mounted engines), or thermal expansion.
K r is the maximum permissible radial misalignment capacity of the coupling and must
not be exceeded during operation. K r is determined by the sum of static and dynamic
misalignments.

Radial misalignments are independent of rotational speed. The relationship between radial
misalignment and angular misalignment is described below in the section titled angular
misalignment.

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

19 / 97

Geislinger Coupling
Angular Misalignment: Ww
An angular misalignment Ww is the inclination of the axis of rotation of the driving and
the driven sides of the coupling. K w is the maximum permissible angular misalignment
capacity of the coupling and is only valid when used in conjunction with the given values
for the maximum axial misalignment .The following should be noted in the case of
simultaneous radial misalignment Wr and angular misalignment Ww

W r

K r
W w K r
K w

Wr actual radial misalignment

Ww actual angular misalignment

K w
K r

max. angular misalignment in accordance with the technical data sheet

max. radial misalignment in accordance with the technical data sheet

mm
mrad
mrad
mm

Rotational Speed n
The rotational speed of the coupling is not limited. If required, the clamping ring can be
recessed into the flange and side plates, securing it in the radial direction.

Axial Reaction Force Fa

The axial reaction force Fa is a reaction force, which occurs during axial movement of the
coupling under nominal torque. After the coupling has moved in response to an axial
force, the couplings reaction force returns to zero. The axial reaction force does not
depend on the magnitude of the axial movement. Some types of oil filled couplings may
create permanent axial forces, depending on the internal sealing system used. Please ask
Geislinger for more information concerning this issue.

Radial Stiffness C r
As a result of radial misalignments, radial reaction forces Fr are produced. These forces
affect the driving and the driven side of the coupling.

Fr C r Wr
Fr
Cr
Wr

radial reaction force

radial stiffness
radial misalignment

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

kN
kN/mm
mm

Coupling Catalog Version 17.6

20 / 97

Geislinger Coupling

Bending Stiffness C w
Angular misalignments produce a reaction torque M w that in turn affects the driving and
driven sides of the coupling.

M w C w W w
M w reaction torque
Cw
bending stiffness
Ww angular misalignment

Nm
kNm/rad
mrad

Relationship between 0 and K r

The radial clearances listed in the section "technical data" meet the specifications set by
Germanischer Lloyd for "high elastic couplings". Therefore, the values given for 0 are
valid. For smaller or larger radial clearances, the following conversion formula applies.

0 const K r 3
0

characteristic coupling frequency

rad/s

K r

maximum radial misalignment taken from the technical data sheet

mm

0 is not the natural frequency of the coupling, but is an assigned frequency for
calculating the dynamic stiffness and the damping.

Flange Connections
The type of the coupling flange (B, BC, etc.) has little effect on the torsional behaviour of
the unit. Therefore, one should specify that the coupling be connected to the flanges of
the engine and gear box by the most practical means.
In most cases, it is possible to connect the inner or outer member of the coupling to the
engine side. It should be noted that the inertias of the inner and outer coupling members
differ greatly. Therefore, the way the coupling is connected will have an effect on the
torsional vibration behaviour of the system.
The couplings listed below show the most commonly used flange types. However,
Geislinger is always prepared to manufacture other connections if it is economically and
technically feasible. Please advise Geislinger if other assembly dimensions / configurations
are required.

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

21 / 97

Geislinger Coupling

Simplified Coupling Selection and Calculation

For a Geislinger Coupling two types of stiffness are available:

Static Stiffness
Stiffness value at a static nominal torque. This is shown in the technical data sheets
as CTstat
For a Geislinger Coupling the static stiffness is practically constant.

Dynamic Stiffness
Under vibratory load, due to the displacement of oil, the coupling becomes stiffer.
The greater the frequency of the vibration, the stiffer the coupling becomes.

Basic damping characteristic for a Geislinger Coupling:

Damping with pressurized oil supply

The hydrodynamic damping, due to restricted oil flow, depends on the phase of the
vibration and the characteristic frequency of the Geislinger Coupling 0 .

In the next 4 steps a simplified way of coupling selection and calculation is demonstrated:
1. First of all, a coupling size for the mean torque T of the engine has to be chosen out of
the technical data sheet with TKN T
2. A torsional system can be prepared with the constant stiffness CTstat of the chosen
coupling, like it is shown in the example of Fig. 4. To calculate the natural frequencies in
this second step, no damping coefficient needs to be used.

Fig. 4

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

22 / 97

Geislinger Coupling
3. Fig. 5 shows the calculated modeshape of the torsional system with the resulting natural
frequency [rad/s] and f [Hz].
Fig. 5

According to the two following equations, the dynamic stiffness CTdyn can be calculated

0 0 :

CTdyn CTstat 1 0.37

0 :

CTdyn CTstat 1.1 0.27

0

The hydrodynamic damping, due to restricted oil flow, depends on the phase of the
vibration and the characteristic frequency of the Geislinger Coupling 0 . By using the
equations of page 11 or following diagram the undimensioned damping factor can
be determined. A conversion table for different damping values can be found on page
11.
Fig. 6

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

23 / 97

Geislinger Coupling

4. The torsional system now can be updated by using the calculated dynamical stiffness
CTdyn and the undimensioned damping factor
Fig. 7

Now the coupling selection is sufficiently accurate for the torsional vibration calculation
with constant parameters. Please contact Geislinger if any further help is needed.

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

24 / 97

Geislinger Coupling

Technical Data

Radial
stiffness

Axial
misalignment

Td , p

PKW

K r

Cr

K a

Fa

K w

Cw

kNm

MNm/rad

rad/s

kNm/bar

kW

mm

kN/mm

mm

kN

mrad

kNm/rad

5.44

0.119

540

0.091

1.7

0.26

8.2

15

0.33

Bending
stiffness

Radial
misalignment

CTstat

Angular
misalignment

Perm. thermal
load

TKN

Axial reaction
force

Perm.
damping
torque

36/2.2/45HC*

Characteristic
frequency of
coupling

Size

Static
torsional
stiffness

Couplings Series 45HC

Nominal
torque

36/3.3/45HC*

8.15

0.179

670

0.136

1.8

0.3

12

1.5

13

1.1

36/5/45HC*

12.4

0.271

950

0.207

1.9

0.35

19

2.2

11

3.9

36/7.5/45HC*

18.5

0.406

1400

0.31

2.1

0.4

28

3.4

13

41/2.2/45HC*

6.6

0.145

370

0.122

2.1

0.28

7.2

15

0.29

41/3.3/45HC*

9.9

0.217

450

0.183

2.3

0.32

11

1.5

13

0.97
3.4

41/5/45HC*

15

0.329

610

0.277

2.4

0.37

16

2.3

11

41/7.5/45HC*

22.5

0.494

850

0.416

2.7

0.42

24

3.5

9.3

11

41/10/45HC*

30

0.658

1200

0.554

2.9

0.47

33

4.6

8.2

27

48/2.2/45HC*

9.53

0.209

370

0.162

2.9

0.32

8.1

1.3

16

0.33

48/3.3/45HC*

14.3

0.314

450

0.243

0.36

12

1.9

14

1.1
3.8

48/5/45HC*

21.6

0.476

650

0.368

3.2

0.42

18

12

48/7.5/45HC*

32.5

0.714

930

0.553

3.5

0.48

28

4.4

10

13

48/10/45HC*

43.3

0.952

1200

0.737

3.8

0.53

37

5.9

8.9

31

56/2.2/45HC*

14.3

0.315

380

0.217

3.9

0.36

9.5

1.7

16

0.39

56/3.3/45HC*

21.5

0.472

530

0.326

0.42

14

2.6

15

1.3

56/5/45HC*

32.6

0.715

740

0.494

4.3

0.48

22

3.9

13

4.5

56/7.5/45HC*

48.8

1.07

1100

0.741

4.6

0.55

33

5.9

11

15

56/10/45HC*

65.1

1.43

1400

0.988

4.9

0.6

44

7.9

9.8

36

56/12.5/45HC*

81.4

1.79

1800

1.23

5.2

0.65

54

9.8

8.8

71

63/2.2/45HC*

18.3

0.401

360

0.274

4.9

0.4

9.7

17

0.39

63/3.3/45HC*

27.4

0.602

470

0.411

5.1

0.45

15

16

1.3

63/5/45HC*

41.5

0.911

690

0.622

5.3

0.52

22

4.5

14

4.6

63/7.5/45HC*

62.3

1.37

990

0.933

5.7

0.59

33

6.7

12

16

63/10/45HC*

83

1.82

1300

1.24

0.65

44

10

37

63/12.5/45HC*

104

2.28

1600

1.56

6.4

0.7

55

11

9.4

72

63/15/45HC*

125

2.73

2000

1.87

6.8

0.75

66

13

8.6

120

72/3.3/45HC*

37.4

0.82

500

0.528

6.5

0.5

16

3.6

17

1.4

72/5/45HC*

56.6

1.24

740

0.799

6.8

0.58

24

5.4

15

72/7.5/45HC*

84.9

1.86

1100

1.2

7.2

0.66

36

8.2

13

17

72/10/45HC*

113

2.48

1500

1.6

7.7

0.73

48

11

11

40

72/12.5/45HC*

142

3.1

1800

8.1

0.78

60

14

10

78

72/15/45HC*

170

3.73

2100

2.4

8.5

0.83

72

16

9.4

130

80/5/45HC*

68

1.49

580

0.994

8.3

0.61

23

5.8

15

4.8

80/7.5/45HC*

102

2.24

860

1.49

8.8

0.7

34

8.8

13

16

80/10/45HC*

136

2.98

1100

1.99

9.2

0.77

46

12

12

38

80/12.5/45HC*

170

3.73

1400

2.48

9.7

0.83

57

15

11

75

80/15/45HC*

204

4.48

1700

2.98

10

0.88

69

18

9.8

130

80/17.5/45HC*

238

5.22

2000

3.48

11

0.93

80

20

9.1

210

All technical data are without warranty. Dimensions and design modifications reserved.
Coupling types marked with * are suitable for combination with Flexlink K8.

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

25 / 97

Geislinger Coupling

Axial
misalignment

PKW

K r

Cr

K a

Fa

K w

Cw

kW

mm

kN/mm

mm

kN

mrad

kNm/rad
5.5

Bending
stiffness

Radial
stiffness

Td , p
kNm/bar

Angular
misalignment

Radial
misalignment

0
rad/s

Axial reaction
force

Perm. thermal
load

CTstat
MNm/rad

Characteristic
frequency of
coupling

TKN
kNm

Static
torsional
stiffness

Size

Perm.
damping
torque

Couplings Series 45HC

Nominal
torque

90/5/45HC*

93.5

2.05

720

1.23

10

0.68

26

7.3

16

90/7.5/45HC*

140

3.08

1100

1.85

11

0.78

40

11

14

19

90/10/45HC*

187

4.1

1400

2.47

11

0.86

53

15

13

44

90/12.5/45HC*

234

5.13

1800

3.09

12

0.92

66

18

12

86

90/15/45HC*

281

6.16

2100

3.7

12

0.98

79

22

11

150

90/17.5/45HC*

327

7.18

2300

4.32

13

92

26

9.5

240

90/20/45HC*

374

8.21

3000

4.94

14

1.1

110

29

9.4

350

100/5/45HC*

94.9

2.08

450

1.49

13

0.68

21

6.6

15

4.3
15

100/7.5/45HC*

142

3.12

650

2.23

13

0.78

31

9.8

14

100/10/45HC*

190

4.17

850

2.97

14

0.86

41

13

12

34

100/12.5/45HC*

237

5.21

1100

3.72

14

0.93

52

16

11

67

100/15/45HC*

285

6.25

1300

4.46

15

0.99

62

20

11

120

100/17.5/45HC*

332

7.29

1300

5.2

16

72

23

9.4

180

100/20/45HC*

380

8.33

1700

5.95

16

1.1

83

26

9.2

280

100/22.5/45HC*

427

9.37

1700

6.69

17

1.1

93

30

8.4

390

110/7.5/45HC*

163

3.58

500

2.71

16

0.82

29

10

14

13

110/10/45HC*

218

4.78

650

3.62

17

0.9

38

13

13

32

110/12.5/45HC*

272

5.97

800

4.52

17

0.97

48

17

12

62

110/15/45HC*

326

7.17

870

5.42

18

57

20

10

110

110/17.5/45HC*

381

8.36

1200

6.33

18

1.1

67

24

10

170

110/20/45HC*

435

9.55

1200

7.23

19

1.1

76

27

9.1

250

110/22.5/45HC*

489

10.7

1500

8.14

20

1.2

86

30

360

110/25/45HC*

544

11.9

1500

9.04

20

1.2

95

34

8.2

500

125/10/45HC*

271

5.95

500

4.7

21

0.97

36

15

13

30

125/12.5/45HC*

338

7.44

550

5.88

22

45

18

12

58

125/15/45HC*

406

8.92

720

7.05

22

1.1

54

22

11

100

125/17.5/45HC*

474

10.4

930

8.23

23

1.2

63

25

11

160

125/20/45HC*

541

11.9

930

9.4

24

1.2

72

29

9.8

240

125/22.5/45HC*

609

13.4

1200

10.6

25

1.3

81

33

9.6

340

125/25/45HC*

677

14.9

1200

11.8

25

1.3

90

36

8.8

470

125/30/45HC*

812

17.8

1500

14.1

27

1.4

110

44

8.1

810

140/12.5/45HC*

404

8.89

480

7.36

27

1.1

42

10

19

12

55

140/15/45HC*

485

10.7

620

8.84

27

1.2

51

10

23

12

95

140/17.5/45HC*

566

12.5

620

10.3

28

1.2

59

10

27

11

150

140/20/45HC*

647

14.2

780

11.8

29

1.3

67

10

31

10

220

140/22.5/45HC*

728

16

780

13.3

30

1.3

76

10

35

9.4

320

140/25/45HC*

808

17.8

970

14.7

31

1.4

84

10

39

9.2

440

140/30/45HC*

970

21.3

1200

17.7

32

1.5

100

10

46

8.5

760

140/35/45HC

1130

24.9

1400

20.6

34

1.6

120

10

54

7.9

1200

All technical data are without warranty. Dimensions and design modifications reserved.
Coupling types marked with * are suitable for combination with Flexlink K8.

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

26 / 97

Geislinger Coupling

Axial
misalignment

PKW

K r

Cr

K a

Fa

K w

Cw

kW

mm

kN/mm

mm

kN

mrad

kNm/rad

160/12.5/45HC*

585

12.9

680

9.56

34

1.3

49

10

25

15

64

160/15/45HC*

702

15.4

680

11.5

35

1.3

59

10

30

13

110

160/17.5/45HC*

820

18

850

13.4

36

1.4

69

10

35

12

180
260

Bending
stiffness

Radial
stiffness

Td , p
kNm/bar

Angular
misalignment

Radial
misalignment

0
rad/s

Axial reaction
force

Perm. thermal
load

CTstat
MNm/rad

Characteristic
frequency of
coupling

TKN
kNm

Size

Static
torsional
stiffness

Perm.
damping
torque

Couplings Series 45HC

Nominal
torque

160/20/45HC*

937

20.6

1000

15.3

37

1.5

79

10

40

12

160/22.5/45HC*

1050

23.2

1000

17.2

38

1.5

89

10

45

11

380

160/25/45HC*

1170

25.7

1300

19.1

39

1.6

99

10

50

11

520

160/30/45HC*

1400

30.9

1500

22.9

41

1.7

120

10

60

9.6

890

160/35/45HC*

1640

36

1800

26.8

43

1.8

140

10

70

8.9

1400

160/40/45HC

1870

41.2

1800

30.6

44

1.8

160

10

81

7.9

2100

180/15/45HC*

899

19.8

640

14.4

44

1.4

61

12

35

14

110

180/17.5/45HC*

1050

23

780

16.8

45

1.5

71

12

40

13

180

180/20/45HC*

1200

26.3

950

19.2

46

1.6

81

12

46

12

270

180/22.5/45HC*

1350

29.6

1100

21.6

47

1.7

91

12

52

12

390

180/25/45HC*

1500

32.9

1100

24

48

1.7

100

12

58

11

530

180/30/45HC*

1800

39.5

1300

28.7

50

1.8

120

12

69

10

910

180/35/45HC*

2100

46.1

1600

33.5

52

1.9

140

12

81

9.3

1500

180/40/45HC*

2400

52.7

1800

38.3

54

160

12

92

8.8

2200

180/45/45HC*

2700

59.3

2100

43.1

56

2.1

180

12

100

8.3

3100

Larger couplings are available on request.

All technical data are without warranty. Dimensions and design modifications reserved.
Coupling types marked with * are suitable for combination with Flexlink K8.

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

27 / 97

Geislinger Coupling

Axial
misalignment

PKW

K r

Cr

K a

Fa

K w

Cw

kW

mm

kN/mm

mm

kN

mrad

kNm/rad
0.33

Bending
stiffness

Radial
stiffness

Td , p
kNm/bar

Angular
misalignment

Radial
misalignment

0
rad/s

Axial reaction
force

Perm. thermal
load

CTstat
MNm/rad

Characteristic
frequency of
coupling

TKN
kNm

Static
torsional
stiffness

Size

Perm.
damping
torque

Couplings Series 45UC

Nominal
torque

36/2.2/45UC*

5.44

0.119

560

0.091

1.7

0.26

8.2

15

36/3.3/45UC*

8.15

0.179

710

0.136

1.8

0.3

12

1.5

13

1.1

36/5/45UC*

12.4

0.271

1000

0.207

1.9

0.35

19

2.2

11

3.9

36/7.5/45UC*

18.5

0.406

1400

0.31

2.1

0.4

28

3.4

13

41/2.2/45UC*

6.6

0.145

380

0.122

2.1

0.28

7.2

15

0.29

41/3.3/45UC*

9.9

0.217

470

0.183

2.3

0.32

11

1.5

13

0.97

41/5/45UC*

15

0.329

640

0.277

2.4

0.37

16

2.3

11

3.4

41/7.5/45UC*

22.5

0.494

900

0.416

2.7

0.42

24

3.5

9.3

11

41/10/45UC*

30

0.658

1200

0.554

2.9

0.47

33

4.6

8.2

27

48/2.2/45UC*

9.53

0.209

380

0.162

2.9

0.32

8.1

1.3

16

0.33

48/3.3/45UC*

14.3

0.314

470

0.243

0.36

12

1.9

14

1.1

48/5/45UC*

21.6

0.476

690

0.368

3.2

0.42

18

12

3.8

48/7.5/45UC*

32.5

0.714

990

0.553

3.5

0.48

28

4.4

10

13

48/10/45UC*

43.3

0.952

1300

0.737

3.8

0.53

37

5.9

8.9

31

56/2.2/45UC*

14.3

0.315

400

0.217

3.9

0.36

9.5

1.7

16

0.39

56/3.3/45UC*

21.5

0.472

560

0.326

0.42

14

2.6

15

1.3

56/5/45UC*

32.6

0.715

790

0.494

4.3

0.48

22

3.9

13

4.5

56/7.5/45UC*

48.8

1.07

1200

0.741

4.6

0.55

33

5.9

11

15

56/10/45UC*

65.1

1.43

1500

0.988

4.9

0.6

44

7.9

9.8

36

56/12.5/45UC*

81.4

1.79

1900

1.23

5.2

0.65

54

9.8

8.8

71

63/2.2/45UC*

18.3

0.401

390

0.274

4.9

0.4

9.7

17

0.39

63/3.3/45UC*

27.4

0.602

500

0.411

5.1

0.45

15

16

1.3
4.6

63/5/45UC*

41.5

0.911

740

0.622

5.3

0.52

22

4.5

14

63/7.5/45UC*

62.3

1.37

1100

0.933

5.7

0.59

33

6.7

12

16

63/10/45UC*

83

1.82

1400

1.24

0.65

44

10

37

63/12.5/45UC*

104

2.28

1700

1.56

6.4

0.7

55

11

9.4

72

63/15/45UC*

125

2.73

2100

1.87

6.8

0.75

66

13

8.6

120
1.4

72/3.3/45UC*

37.4

0.82

530

0.528

6.5

0.5

16

3.6

17

72/5/45UC*

56.6

1.24

800

0.799

6.8

0.58

24

5.4

15

72/7.5/45UC*

84.9

1.86

1200

1.2

7.2

0.66

36

8.2

13

17

72/10/45UC*

113

2.48

1600

1.6

7.7

0.73

48

11

11

40

72/12.5/45UC*

142

3.1

1900

8.1

0.78

60

14

10

78

72/15/45UC*

170

3.73

2300

2.4

8.5

0.83

72

16

9.4

130

80/5/45UC*

68

1.49

620

0.994

8.3

0.61

23

5.8

15

4.8

80/7.5/45UC*

102

2.24

920

1.49

8.8

0.7

34

8.8

13

16

80/10/45UC*

136

2.98

1200

1.99

9.2

0.77

46

12

12

38

80/12.5/45UC*

170

3.73

1500

2.48

9.7

0.83

57

15

11

75

80/15/45UC*

204

4.48

1800

2.98

10

0.88

69

18

9.8

130

80/17.5/45UC*

238

5.22

2100

3.48

11

0.93

80

20

9.1

210

All technical data are without warranty. Dimensions and design modifications reserved.
Coupling types marked with * are suitable for combination with Flexlink K8.

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

28 / 97

Geislinger Coupling

Axial
misalignment

PKW

K r

Cr

K a

Fa

K w

Cw

kW

mm

kN/mm

mm

kN

mrad

kNm/rad
5.5

Bending
stiffness

Radial
stiffness

Td , p
kNm/bar

Angular
misalignment

Radial
misalignment

0
rad/s

Axial reaction
force

Perm. thermal
load

CTstat
MNm/rad

Characteristic
frequency of
coupling

TKN
kNm

Static
torsional
stiffness

Size

Perm.
damping
torque

Couplings Series 45UC

Nominal
torque

90/5/45UC*

93.5

2.05

780

1.23

10

0.68

26

7.3

16

90/7.5/45UC*

140

3.08

1200

1.85

11

0.78

40

11

14

19

90/10/45UC*

187

4.1

1600

2.47

11

0.86

53

15

13

44

90/12.5/45UC*

234

5.13

1900

3.09

12

0.92

66

18

12

86

90/15/45UC*

281

6.16

2300

3.7

12

0.98

79

22

11

150

90/17.5/45UC*

327

7.18

2400

4.32

13

92

26

9.5

240

90/20/45UC*

374

8.21

3300

4.94

14

1.1

110

29

9.4

350

100/5/45UC*

94.9

2.08

490

1.49

13

0.68

21

6.6

15

4.3
15

100/7.5/45UC*

142

3.12

700

2.23

13

0.78

31

9.8

14

100/10/45UC*

190

4.17

920

2.97

14

0.86

41

13

12

34

100/12.5/45UC*

237

5.21

1200

3.72

14

0.93

52

16

11

67

100/15/45UC*

285

6.25

1400

4.46

15

0.99

62

20

11

120

100/17.5/45UC*

332

7.29

1400

5.2

16

72

23

9.4

180

100/20/45UC*

380

8.33

1900

5.95

16

1.1

83

26

9.2

280

100/22.5/45UC*

427

9.37

1900

6.69

17

1.1

93

30

8.4

390

110/7.5/45UC*

163

3.58

540

2.71

16

0.82

29

10

14

13

110/10/45UC*

218

4.78

690

3.62

17

0.9

38

13

13

32

110/12.5/45UC*

272

5.97

860

4.52

17

0.97

48

17

12

62

110/15/45UC*

326

7.17

940

5.42

18

57

20

10

110

110/17.5/45UC*

381

8.36

1200

6.33

18

1.1

67

24

10

170

110/20/45UC*

435

9.55

1200

7.23

19

1.1

76

27

9.1

250

110/22.5/45UC*

489

10.7

1600

8.14

20

1.2

86

30

360

110/25/45UC*

544

11.9

1600

9.04

20

1.2

95

34

8.2

500

125/10/45UC*

271

5.95

540

4.7

21

0.97

36

15

13

30

125/12.5/45UC*

338

7.44

580

5.88

22

45

18

12

58

125/15/45UC*

406

8.92

770

7.05

22

1.1

54

22

11

100

125/17.5/45UC*

474

10.4

1000

8.23

23

1.2

63

25

11

160

125/20/45UC*

541

11.9

1000

9.4

24

1.2

72

29

9.8

240

125/22.5/45UC*

609

13.4

1300

10.6

25

1.3

81

33

9.6

340

125/25/45UC*

677

14.9

1300

11.8

25

1.3

90

36

8.8

470

125/30/45UC*

812

17.8

1600

14.1

27

1.4

110

44

8.1

810

140/12.5/45UC*

404

8.89

510

7.36

27

1.1

42

10

19

12

55

140/15/45UC*

485

10.7

660

8.84

27

1.2

51

10

23

12

95

140/17.5/45UC*

566

12.5

660

10.3

28

1.2

59

10

27

11

150

140/20/45UC*

647

14.2

840

11.8

29

1.3

67

10

31

10

220

140/22.5/45UC*

728

16

840

13.3

30

1.3

76

10

35

9.4

320

140/25/45UC*

808

17.8

1000

14.7

31

1.4

84

10

39

9.2

440

140/30/45UC*

970

21.3

1300

17.7

32

1.5

100

10

46

8.5

760

140/35/45UC

1130

24.9

1600

20.6

34

1.6

120

10

54

7.9

1200

All technical data are without warranty. Dimensions and design modifications reserved.
Coupling types marked with * are suitable for combination with Flexlink K8.

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

29 / 97

Geislinger Coupling

Axial
misalignment

PKW

K r

Cr

K a

Fa

K w

Cw

kW

mm

kN/mm

mm

kN

mrad

kNm/rad

160/12.5/45UC*

585

12.9

740

9.56

34

1.3

49

10

25

15

64

160/15/45UC*

702

15.4

740

11.5

35

1.3

59

10

30

13

110

160/17.5/45UC*

820

18

920

13.4

36

1.4

69

10

35

12

180
260

Bending
stiffness

Radial
stiffness

Td , p
kNm/bar

Angular
misalignment

Radial
misalignment

0
rad/s

Axial reaction
force

Perm. thermal
load

CTstat
MNm/rad

Characteristic
frequency of
coupling

TKN
kNm

Size

Static
torsional
stiffness

Perm.
damping
torque

Couplings Series 45UC

Nominal
torque

160/20/45UC*

937

20.6

1100

15.3

37

1.5

79

10

40

12

160/22.5/45UC*

1050

23.2

1100

17.2

38

1.5

89

10

45

11

380

160/25/45UC*

1170

25.7

1400

19.1

39

1.6

99

10

50

11

520

160/30/45UC*

1400

30.9

1600

22.9

41

1.7

120

10

60

9.6

890

160/35/45UC*

1640

36

2000

26.8

43

1.8

140

10

70

8.9

1400

160/40/45UC

1870

41.2

2000

30.6

44

1.8

160

10

81

7.9

2100

180/15/45UC*

899

19.8

690

14.4

44

1.4

61

12

35

14

110

180/17.5/45UC*

1050

23

850

16.8

45

1.5

71

12

40

13

180

180/20/45UC*

1200

26.3

1000

19.2

46

1.6

81

12

46

12

270

180/22.5/45UC*

1350

29.6

1200

21.6

47

1.7

91

12

52

12

390

180/25/45UC*

1500

32.9

1200

24

48

1.7

100

12

58

11

530

180/30/45UC*

1800

39.5

1500

28.7

50

1.8

120

12

69

10

910

180/35/45UC*

2100

46.1

1700

33.5

52

1.9

140

12

81

9.3

1500

180/40/45UC*

2400

52.7

2000

38.3

54

160

12

92

8.8

2200

180/45/45UC*

2700

59.3

2300

43.1

56

2.1

180

12

100

8.3

3100

Larger couplings are available on request.

All technical data are without warranty. Dimensions and design modifications reserved.
Coupling types marked with * are suitable for combination with Flexlink K8.

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

30 / 97

Geislinger Coupling

Axial
misalignment

PKW

K r

Cr

K a

Fa

K w

Cw

kW

mm

kN/mm

mm

kN

mrad

kNm/rad

36/2.2/75NC*

4.91

0.065

400

0.0904

1.7

0.25

6.1

14

0.25

36/3.3/75NC*

7.36

0.097

530

0.136

1.8

0.29

9.1

1.6

12

0.83

36/5/75NC*

11.1

0.147

790

0.205

1.9

0.34

14

2.4

11

2.9

36/7.5/75NC*

16.7

0.22

1100

0.308

2.1

0.38

21

3.6

8.6

9.7

41/2.2/75NC*

6.51

0.086

350

0.121

2.1

0.28

1.2

15

0.24

Bending
stiffness

Radial
stiffness

Td , p
kNm/bar

Angular
misalignment

Radial
misalignment

0
rad/s

Axial reaction
force

Perm. thermal
load

CTstat
MNm/rad

Characteristic
frequency of
coupling

TKN
kNm

Size

Static
torsional
stiffness

Perm.
damping
torque

Couplings Series 75NC

Nominal
torque

41/3.3/75NC*

9.77

0.129

450

0.181

2.3

0.32

1.8

13

0.82

41/5/75NC*

14.8

0.195

640

0.275

2.4

0.37

14

2.7

11

2.8

41/7.5/75NC*

22.2

0.292

910

0.412

2.7

0.42

20

4.1

9.3

9.6

41/10/75NC*

29.6

0.39

1200

0.549

2.9

0.46

27

5.4

23

48/2.2/75NC*

8.35

0.11

250

0.163

2.9

0.3

5.5

1.3

15

0.22

48/3.3/75NC*

12.5

0.165

340

0.244

0.35

8.3

1.9

14

0.75

48/5/75NC*

19

0.25

470

0.37

3.2

0.4

13

12

2.6

48/7.5/75NC*

28.5

0.374

690

0.555

3.5

0.46

19

4.4

9.8

8.9

48/10/75NC*

37.9

0.499

870

0.74

3.8

0.5

25

5.9

8.4

21

56/2.2/75NC*

12.5

0.165

300

0.218

3.9

0.35

6.5

1.7

16

0.26

56/3.3/75NC*

18.8

0.247

400

0.327

0.4

9.8

2.6

15

0.89

56/5/75NC*

28.4

0.374

590

0.496

4.3

0.46

15

3.9

13

3.1

56/7.5/75NC*

42.7

0.561

830

0.744

4.6

0.52

22

5.9

11

10

56/10/75NC*

56.9

0.748

1100

0.992

4.9

0.58

30

7.9

9.5

25

56/12.5/75NC*

71.1

0.935

1400

1.24

5.2

0.62

37

9.8

8.4

49

63/2.2/75NC*

15.3

0.202

220

0.277

4.9

0.37

6.2

1.9

16

0.25

63/3.3/75NC*

23

0.303

320

0.416

5.1

0.43

9.3

2.8

15

0.85
2.9

63/5/75NC*

34.9

0.459

450

0.63

5.3

0.49

14

4.2

13

63/7.5/75NC*

52.3

0.688

660

0.946

5.7

0.56

21

6.4

11

10

63/10/75NC*

69.7

0.918

880

1.26

0.62

28

8.5

10

24

63/12.5/75NC*

87.1

1.15

1100

1.58

6.4

0.66

35

11

8.9

46

63/15/75NC*

105

1.38

1300

1.89

6.8

0.71

43

13

8.2

80
0.87

72/3.3/75NC*

29.8

0.393

280

0.535

6.5

0.46

9.6

3.2

15

72/5/75NC*

45.1

0.595

400

0.811

6.8

0.53

15

4.9

14

72/7.5/75NC*

67.7

0.892

600

1.22

7.2

0.61

22

7.3

12

10

72/10/75NC*

90.3

1.19

800

1.62

7.7

0.67

29

9.8

11

24

72/12.5/75NC*

113

1.49

980

2.03

8.1

0.72

36

12

9.5

47

72/15/75NC*

135

1.78

1200

2.43

8.5

0.77

44

15

8.7

82

80/5/75NC*

57

0.75

400

1.01

8.3

0.58

15

5.5

15

3.1

80/7.5/75NC*

85.5

1.13

580

1.51

8.8

0.66

22

8.3

13

10

80/10/75NC*

114

1.5

780

2.02

9.2

0.73

29

11

11

24

80/12.5/75NC*

143

1.88

950

2.52

9.7

0.78

37

14

10

48

80/15/75NC*

171

2.25

1100

3.03

10

0.83

44

17

9.2

83

80/17.5/75NC*

200

2.63

1400

3.53

11

0.88

51

19

8.6

130

All technical data are without warranty. Dimensions and design modifications reserved.
Coupling types marked with * are suitable for combination with Flexlink K8.

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

31 / 97

Geislinger Coupling

Axial
misalignment

PKW

K r

Cr

K a

Fa

K w

Cw

kW

mm

kN/mm

mm

kN

mrad

kNm/rad
3.1

Bending
stiffness

Radial
stiffness

Td , p
kNm/bar

Angular
misalignment

Radial
misalignment

0
rad/s

Axial reaction
force

Perm. thermal
load

CTstat
MNm/rad

Characteristic
frequency of
coupling

TKN
kNm

Static
torsional
stiffness

Size

Perm.
damping
torque

Couplings Series 75NC

Nominal
torque

90/5/75NC*

71.7

0.944

340

1.27

10

0.62

15

6.2

15

90/7.5/75NC*

108

1.42

510

1.91

11

0.71

22

9.3

13

10

90/10/75NC*

143

1.89

700

2.55

11

0.79

29

12

12

25

90/12.5/75NC*

179

2.36

870

3.18

12

0.85

37

16

11

48

90/15/75NC*

215

2.83

1000

3.82

12

0.9

44

19

9.7

83

90/17.5/75NC*

251

3.31

1200

4.45

13

0.95

52

22

130

90/20/75NC*

287

3.78

1400

5.09

14

0.99

59

25

8.4

200

100/5/75NC*

80.9

1.07

340

1.5

13

0.65

14

6.4

15

2.9
9.7

100/7.5/75NC*

121

1.6

480

2.25

13

0.74

21

9.6

13

100/10/75NC*

162

2.13

640

3.01

14

0.82

28

13

12

23

100/12.5/75NC*

202

2.67

790

3.76

14

0.88

34

16

11

45

100/15/75NC*

243

3.2

950

4.51

15

0.94

41

19

10

78

100/17.5/75NC*

283

3.73

1100

5.26

16

0.98

48

22

9.2

120

100/20/75NC*

324

4.26

1100

6.01

16

55

26

8.4

180

100/22.5/75NC*

364

4.8

1500

6.76

17

1.1

62

29

8.4

260

110/7.5/75NC*

132

1.74

280

2.77

16

0.76

17

9.1

13

8.1

110/10/75NC*

175

2.31

370

3.69

17

0.84

23

12

12

19

110/12.5/75NC*

219

2.89

450

4.62

17

0.9

29

15

11

38

110/15/75NC*

263

3.47

540

5.54

18

0.96

35

18

9.9

65

110/17.5/75NC*

307

4.05

610

6.47

18

40

21

9.2

100

110/20/75NC*

351

4.63

810

7.39

19

1.1

46

24

9.1

150

110/22.5/75NC*

395

5.21

810

8.31

20

1.1

52

27

8.2

220

110/25/75NC

439

5.78

810

9.24

20

1.1

58

30

7.5

300

125/10/75NC*

238

3.14

440

4.73

21

0.93

25

15

13

21

125/12.5/75NC*

298

3.93

540

5.91

22

32

19

12

41

125/15/75NC*

358

4.71

710

7.09

22

1.1

38

22

11

71

125/17.5/75NC*

417

5.5

710

8.27

23

1.1

44

26

10

110

125/20/75NC*

477

6.28

920

9.45

24

1.2

50

30

9.8

170

125/22.5/75NC*

536

7.07

920

10.6

25

1.2

57

33

8.9

240

125/25/75NC*

596

7.86

1200

11.8

25

1.3

63

37

8.8

330

125/30/75NC

715

9.43

1200

14.2

27

1.3

76

44

7.5

570

140/12.5/75NC*

350

4.61

440

7.46

27

1.1

28

10

19

12

37

140/15/75NC*

420

5.53

440

8.95

27

1.1

34

10

23

11

63

140/17.5/75NC*

490

6.45

560

10.4

28

1.2

39

10

27

11

100

140/20/75NC*

560

7.37

560

11.9

29

1.2

45

10

30

9.5

150

140/22.5/75NC*

630

8.3

720

13.4

30

1.3

51

10

34

9.4

210

140/25/75NC*

700

9.22

720

14.9

31

1.3

56

10

38

8.6

290

140/30/75NC
140/35/75NC

840
980

11.1
12.9

890
1100

17.9
20.9

32
34

1.4
1.5

67
79

10
10

45
53

7.9
7.4

510
800

All technical data are without warranty. Dimensions and design modifications reserved.
Coupling types marked with * are suitable for combination with Flexlink K8.

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

32 / 97

Geislinger Coupling

Axial
misalignment

PKW

K r

Cr

K a

Fa

K w

Cw

kW

mm

kN/mm

mm

kN

mrad

kNm/rad

160/12.5/75NC*

466

6.15

430

9.76

34

1.2

29

10

22

13

38

160/15/75NC*

559

7.38

430

11.7

35

1.2

35

10

27

12

66

160/17.5/75NC*

653

8.61

540

13.7

36

1.3

41

10

31

11

110

Bending
stiffness

Radial
stiffness

Td , p
kNm/bar

Angular
misalignment

Radial
misalignment

0
rad/s

Axial reaction
force

Perm. thermal
load

CTstat
MNm/rad

Characteristic
frequency of
coupling

TKN
kNm

Size

Static
torsional
stiffness

Perm.
damping
torque

Couplings Series 75NC

Nominal
torque

160/20/75NC*

746

9.83

680

15.6

37

1.4

47

10

36

11

160

160/22.5/75NC*

839

11.1

680

17.6

38

1.4

53

10

40

10

220

160/25/75NC*

932

12.3

830

19.5

39

1.5

59

10

45

9.9

310

160/30/75NC*

1120

14.8

1000

23.4

41

1.6

71

10

54

9.1

530

160/35/75NC

1310

17.2

1000

27.3

43

1.6

83

10

63

7.9

840

160/40/75NC

1490

19.7

1200

31.2

44

1.7

95

10

72

7.5

1300

180/15/75NC*

709

9.35

470

14.7

44

1.3

36

12

31

13

68

180/17.5/75NC*

827

10.9

580

17.2

45

1.4

42

12

36

12

110

180/20/75NC*

945

12.5

710

19.6

46

1.5

48

12

41

12

160

180/22.5/75NC*

1060

14

710

22.1

47

1.5

54

12

46

11

230

180/25/75NC*

1180

15.6

870

24.5

48

1.6

60

12

51

10

310

180/30/75NC*

1420

18.7

1000

29.4

50

1.7

73

12

61

9.5

540

180/35/75NC*

1650

21.8

1200

34.3

52

1.8

85

12

71

8.8

860

180/40/75NC*

1890

24.9

1400

39.2

54

1.9

97

12

82

8.3

1300

180/45/75NC

2130

28.1

1400

44.1

56

1.9

110

12

92

7.5

1800

Larger couplings are available on request.

All technical data are without warranty. Dimensions and design modifications reserved.
Coupling types marked with * are suitable for combination with Flexlink K8.

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

33 / 97

Geislinger Coupling

Axial
misalignment

PKW

K r

Cr

K a

Fa

K w

Cw

kW

mm

kN/mm

mm

kN

mrad

kNm/rad

Bending
stiffness

Radial
stiffness

Td , p
kNm/bar

Angular
misalignment

Radial
misalignment

0
rad/s

Axial reaction
force

Perm. thermal
load

CTstat
MNm/rad

Characteristic
frequency of
coupling

TKN
kNm

Static
torsional
stiffness

Size

Perm.
damping
torque

Couplings Series 75HC

Nominal
torque

36/2.2/75HC*

3.76

0.05

250

0.0928

1.7

0.23

4.7

0.8

13

0.19

36/3.3/75HC*

5.63

0.074

320

0.139

1.8

0.27

1.2

12

0.63

36/5/75HC*

8.53

0.113

440

0.211

1.9

0.31

11

1.8

9.8

2.2

36/7.5/75HC

12.8

0.169

600

0.316

2.1

0.35

16

2.7

7.9

7.5

41/2.2/75HC*

5.1

0.067

230

0.124

2.1

0.26

4.7

0.9

14

0.19

41/3.3/75HC*

7.65

0.101

290

0.187

2.3

0.3

1.4

13

0.64

41/5/75HC*

11.6

0.152

390

0.283

2.4

0.34

11

2.1

10

2.2

41/7.5/75HC*

17.4

0.229

560

0.424

2.7

0.39

16

3.2

8.7

7.5

41/10/75HC

23.2

0.305

730

0.565

2.9

0.43

21

4.3

7.5

18

48/2.2/75HC*

6.58

0.086

170

0.167

2.9

0.28

4.4

14

0.18

48/3.3/75HC*

9.86

0.13

210

0.251

0.32

6.5

1.5

12

0.59

48/5/75HC*

14.9

0.196

290

0.38

3.2

0.37

9.9

2.3

11

2.1

48/7.5/75HC*

22.4

0.295

400

0.57

3.5

0.42

15

3.5

48/10/75HC

29.9

0.393

550

0.759

3.8

0.47

20

4.7

7.9

17

56/2.2/75HC*

9.72

0.128

170

0.224

3.9

0.32

5.1

1.3

15

0.21

56/3.3/75HC*

14.6

0.192

240

0.336

0.37

7.6

13

0.69

56/5/75HC*

22.1

0.291

320

0.509

4.3

0.42

12

3.1

12

2.4
8.1

56/7.5/75HC*

33.1

0.436

470

0.763

4.6

0.48

17

4.6

9.9

56/10/75HC*

44.2

0.582

620

1.02

4.9

0.53

23

6.1

8.7

19

56/12.5/75HC

55.2

0.727

770

1.27

5.2

0.57

29

7.6

7.8

38

63/2.2/75HC*

11.8

0.155

130

0.285

4.9

0.34

4.8

1.4

15

0.19

63/3.3/75HC*

17.6

0.232

170

0.427

5.1

0.39

7.2

2.1

14

0.65

63/5/75HC*

26.7

0.352

250

0.648

5.3

0.45

11

3.3

12

2.3

63/7.5/75HC*

40.1

0.528

350

0.971

5.7

0.51

16

4.9

10

7.6

63/10/75HC*

53.4

0.704

460

1.3

0.56

22

6.5

18

63/12.5/75HC*

66.8

0.88

590

1.62

6.4

0.61

27

8.1

8.2

35

63/15/75HC

80.1

1.06

710

1.94

6.8

0.65

33

9.8

7.5

61

72/3.3/75HC*

23.1

0.304

170

0.548

6.5

0.43

7.4

2.5

14

0.67

72/5/75HC*

34.9

0.461

230

0.83

6.8

0.49

11

3.8

13

2.3

72/7.5/75HC*

52.4

0.691

340

1.25

7.2

0.56

17

5.7

11

7.9

72/10/75HC*

69.9

0.921

450

1.66

7.7

0.62

23

7.6

9.8

19

72/12.5/75HC*

87.3

1.15

570

2.08

8.1

0.67

28

9.5

8.8

37

72/15/75HC*

105

1.38

670

2.49

8.5

0.71

34

11

63

80/5/75HC*

44.8

0.589

230

1.04

8.3

0.53

12

4.3

13

2.4

80/7.5/75HC*

67.2

0.884

340

1.56

8.8

0.61

17

6.5

12

8.1

80/10/75HC*

89.6

1.18

450

2.07

9.2

0.67

23

8.7

10

19

80/12.5/75HC*

112

1.47

560

2.59

9.7

0.72

29

11

9.3

38

80/15/75HC*

134

1.77

680

3.11

10

0.77

35

13

8.6

65

80/17.5/75HC

157

2.06

790

3.63

11

0.81

40

15

7.9

100

All technical data are without warranty. Dimensions and design modifications reserved.
Coupling types marked with * are suitable for combination with Flexlink K8.

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

34 / 97

Geislinger Coupling

Axial
misalignment

PKW

K r

Cr

K a

Fa

K w

Cw

kW

mm

kN/mm

mm

kN

mrad

kNm/rad

Bending
stiffness

Radial
stiffness

Td , p
kNm/bar

Angular
misalignment

Radial
misalignment

0
rad/s

Axial reaction
force

Perm. thermal
load

CTstat
MNm/rad

Characteristic
frequency of
coupling

TKN
kNm

Static
torsional
stiffness

Size

Perm.
damping
torque

Couplings Series 75HC

Nominal
torque

90/5/75HC*

56.7

0.746

210

1.31

10

0.58

12

4.9

14

2.4

90/7.5/75HC*

85.1

1.12

310

1.97

11

0.66

17

7.4

12

8.2

90/10/75HC*

113

1.49

420

2.62

11

0.73

23

9.8

11

19

90/12.5/75HC*

142

1.87

510

3.28

12

0.78

29

12

9.8

38

90/15/75HC*

170

2.24

610

3.93

12

0.83

35

15

65

90/17.5/75HC*

198

2.61

700

4.59

13

0.87

41

17

8.3

100

90/20/75HC

227

2.98

800

5.24

14

0.91

47

20

7.7

160

100/5/75HC*

63.6

0.837

200

1.54

13

0.6

11

14

2.2

100/7.5/75HC*

95.4

1.26

280

2.32

13

0.69

16

7.5

12

7.6

100/10/75HC*

127

1.67

360

3.09

14

0.75

22

10

11

18

100/12.5/75HC*

159

2.09

450

3.86

14

0.81

27

13

9.9

35

100/15/75HC*

191

2.51

530

4.63

15

0.86

32

15

9.1

61

100/17.5/75HC*

222

2.93

630

5.41

16

0.91

38

18

8.5

97

100/20/75HC

254

3.35

710

6.18

16

0.95

43

20

140

100/22.5/75HC

286

3.77

800

6.95

17

0.99

49

23

7.5

210

110/7.5/75HC*

104

1.37

170

2.84

16

0.71

14

7.2

12

6.4

110/10/75HC*

139

1.83

220

3.79

17

0.78

18

9.6

11

15

110/12.5/75HC*

173

2.28

280

4.74

17

0.84

23

12

10

30

110/15/75HC*

208

2.74

330

5.68

18

0.89

27

14

9.2

51

110/17.5/75HC*

243

3.19

380

6.63

18

0.94

32

17

8.6

82

110/20/75HC*

277

3.65

430

7.58

19

0.98

37

19

8.1

120

110/22.5/75HC

312

4.11

460

8.53

20

41

22

7.5

170

110/25/75HC

347

4.56

610

9.47

20

1.1

46

24

7.5

240

125/10/75HC*

185

2.44

220

4.86

21

0.85

20

11

12

16

125/12.5/75HC*

231

3.04

280

6.08

22

0.92

24

14

11

32

125/15/75HC*

277

3.65

330

7.29

22

0.98

29

17

10

55

125/17.5/75HC*

323

4.26

350

8.51

23

34

20

87

125/20/75HC*

369

4.87

470

9.72

24

1.1

39

23

8.9

130

125/22.5/75HC*

416

5.48

470

10.9

25

1.1

44

26

8.1

190

125/25/75HC*

462

6.09

610

12.2

25

1.2

49

29

8.1

250

125/30/75HC

554

7.31

610

14.6

27

1.2

59

34

6.9

440

140/12.5/75HC*

269

3.54

200

7.68

27

0.97

22

10

15

11

28

140/15/75HC*

323

4.25

210

9.22

27

26

10

17

9.9

49

140/17.5/75HC*

376

4.96

280

10.8

28

1.1

30

10

20

9.6

77

140/20/75HC*

430

5.67

280

12.3

29

1.1

35

10

23

8.7

120

140/22.5/75HC*

484

6.38

370

13.8

30

1.2

39

10

26

8.6

160

140/25/75HC

538

7.09

370

15.4

31

1.2

43

10

29

7.9

220

140/30/75HC

645

8.5

460

18.4

32

1.3

52

10

35

7.4

390

140/35/75HC

753

9.92

580

21.5

34

1.4

60

10

41

6.9

620

All technical data are without warranty. Dimensions and design modifications reserved.
Coupling types marked with * are suitable for combination with Flexlink K8.

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

35 / 97

Geislinger Coupling

Axial
misalignment

PKW

K r

Cr

K a

Fa

K w

Cw

kW

mm

kN/mm

mm

kN

mrad

kNm/rad

160/12.5/75HC*

363

4.79

210

10

34

1.1

23

10

17

12

30

160/15/75HC*

436

5.75

210

12

35

1.1

28

10

21

11

52

160/17.5/75HC*

509

6.71

280

14

36

1.2

32

10

24

11

82

Bending
stiffness

Radial
stiffness

Td , p
kNm/bar

Angular
misalignment

Radial
misalignment

0
rad/s

Axial reaction
force

Perm. thermal
load

CTstat
MNm/rad

Characteristic
frequency of
coupling

TKN
kNm

Size

Static
torsional
stiffness

Perm.
damping
torque

Couplings Series 75HC

Nominal
torque

160/20/75HC*

581

7.67

350

16

37

1.3

37

10

28

10

120

160/22.5/75HC*

654

8.63

350

18

38

1.3

41

10

31

9.4

170

160/25/75HC*

727

9.59

350

20

39

1.3

46

10

35

8.6

240

160/30/75HC

872

11.5

440

24

41

1.4

55

10

42

7.9

410

160/35/75HC

1020

13.4

540

28

43

1.5

64

10

49

7.4

660

160/40/75HC

1160

15.3

650

32

44

1.6

74

10

56

7.1

980

180/15/75HC*

553

7.3

220

15.1

44

1.2

28

12

24

12

53

180/17.5/75HC*

645

8.52

270

17.6

45

1.3

33

12

28

11

84

180/20/75HC*

737

9.73

340

20.1

46

1.4

38

12

32

11

130

180/22.5/75HC*

829

11

340

22.6

47

1.4

42

12

36

9.9

180

180/25/75HC*

921

12.2

420

25.1

48

1.5

47

12

40

9.8

250

180/30/75HC*

1110

14.6

510

30.2

50

1.6

57

12

48

420

180/35/75HC

1290

17

510

35.2

52

1.6

66

12

56

7.9

670

180/40/75HC

1470

19.5

610

40.2

54

1.7

75

12

64

7.4

1000

180/45/75HC

1660

21.9

720

45.2

56

1.8

85

12

72

7.1

1400

Larger couplings are available on request.

All technical data are without warranty. Dimensions and design modifications reserved.
Coupling types marked with * are suitable for combination with Flexlink K8.

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

36 / 97

Geislinger Coupling

Axial
misalignment

PKW

K r

Cr

K a

Fa

K w

Cw

kW

mm

kN/mm

mm

kN

mrad

kNm/rad

Bending
stiffness

Radial
stiffness

Td , p
kNm/bar

Angular
misalignment

Radial
misalignment

0
rad/s

Axial reaction
force

Perm. thermal
load

CTstat
MNm/rad

Characteristic
frequency of
coupling

TKN
kNm

Static
torsional
stiffness

Size

Perm.
damping
torque

Couplings Series 75UC

Nominal
torque

36/2.2/75UC*

3.76

0.05

280

0.0928

1.7

0.23

4.7

0.8

13

0.19

36/3.3/75UC*

5.63

0.074

370

0.139

1.8

0.27

1.2

12

0.63

36/5/75UC*

8.53

0.113

510

0.211

1.9

0.31

11

1.8

9.8

2.2

36/7.5/75UC

12.8

0.169

700

0.316

2.1

0.35

16

2.7

7.9

7.5

41/2.2/75UC*

5.1

0.067

260

0.124

2.1

0.26

4.7

0.9

14

0.19

41/3.3/75UC*

7.65

0.101

330

0.187

2.3

0.3

1.4

13

0.64

41/5/75UC*

11.6

0.152

450

0.283

2.4

0.34

11

2.1

10

2.2

41/7.5/75UC*

17.4

0.229

650

0.424

2.7

0.39

16

3.2

8.7

7.5

41/10/75UC

23.2

0.305

860

0.565

2.9

0.43

21

4.3

7.5

18

48/2.2/75UC*

6.58

0.086

180

0.167

2.9

0.28

4.4

14

0.18

48/3.3/75UC*

9.86

0.13

230

0.251

0.32

6.5

1.5

12

0.59

48/5/75UC*

14.9

0.196

330

0.38

3.2

0.37

9.9

2.3

11

2.1

48/7.5/75UC*

22.4

0.295

460

0.57

3.5

0.42

15

3.5

48/10/75UC

29.9

0.393

640

0.759

3.8

0.47

20

4.7

7.9

17

56/2.2/75UC*

9.72

0.128

200

0.224

3.9

0.32

5.1

1.3

15

0.21

56/3.3/75UC*

14.6

0.192

270

0.336

0.37

7.6

13

0.69

56/5/75UC*

22.1

0.291

380

0.509

4.3

0.42

12

3.1

12

2.4
8.1

56/7.5/75UC*

33.1

0.436

550

0.763

4.6

0.48

17

4.6

9.9

56/10/75UC*

44.2

0.582

740

1.02

4.9

0.53

23

6.1

8.7

19

56/12.5/75UC

55.2

0.727

910

1.27

5.2

0.57

29

7.6

7.8

38

63/2.2/75UC*

11.8

0.155

150

0.285

4.9

0.34

4.8

1.4

15

0.19

63/3.3/75UC*

17.6

0.232

200

0.427

5.1

0.39

7.2

2.1

14

0.65

63/5/75UC*

26.7

0.352

290

0.648

5.3

0.45

11

3.3

12

2.3

63/7.5/75UC*

40.1

0.528

410

0.971

5.7

0.51

16

4.9

10

7.6

63/10/75UC*

53.4

0.704

540

1.3

0.56

22

6.5

18

63/12.5/75UC*

66.8

0.88

690

1.62

6.4

0.61

27

8.1

8.2

35

63/15/75UC

80.1

1.06

830

1.94

6.8

0.65

33

9.8

7.5

61

72/3.3/75UC*

23.1

0.304

190

0.548

6.5

0.43

7.4

2.5

14

0.67

72/5/75UC*

34.9

0.461

270

0.83

6.8

0.49

11

3.8

13

2.3

72/7.5/75UC*

52.4

0.691

400

1.25

7.2

0.56

17

5.7

11

7.9

72/10/75UC*

69.9

0.921

540

1.66

7.7

0.62

23

7.6

9.8

19

72/12.5/75UC*

87.3

1.15

680

2.08

8.1

0.67

28

9.5

8.8

37

72/15/75UC*

105

1.38

800

2.49

8.5

0.71

34

11

63

80/5/75UC*

44.8

0.589

270

1.04

8.3

0.53

12

4.3

13

2.4

80/7.5/75UC*

67.2

0.884

410

1.56

8.8

0.61

17

6.5

12

8.1

80/10/75UC*

89.6

1.18

540

2.07

9.2

0.67

23

8.7

10

19

80/12.5/75UC*

112

1.47

670

2.59

9.7

0.72

29

11

9.3

38

80/15/75UC*

134

1.77

810

3.11

10

0.77

35

13

8.6

65

80/17.5/75UC

157

2.06

950

3.63

11

0.81

40

15

7.9

100

All technical data are without warranty. Dimensions and design modifications reserved.
Coupling types marked with * are suitable for combination with Flexlink K8.

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

37 / 97

Geislinger Coupling

Axial
misalignment

PKW

K r

Cr

K a

Fa

K w

Cw

kW

mm

kN/mm

mm

kN

mrad

kNm/rad

Bending
stiffness

Radial
stiffness

Td , p
kNm/bar

Angular
misalignment

Radial
misalignment

0
rad/s

Axial reaction
force

Perm. thermal
load

CTstat
MNm/rad

Characteristic
frequency of
coupling

TKN
kNm

Static
torsional
stiffness

Size

Perm.
damping
torque

Couplings Series 75UC

Nominal
torque

90/5/75UC*

56.7

0.746

250

1.31

10

0.58

12

4.9

14

2.4

90/7.5/75UC*

85.1

1.12

370

1.97

11

0.66

17

7.4

12

8.2

90/10/75UC*

113

1.49

500

2.62

11

0.73

23

9.8

11

19

90/12.5/75UC*

142

1.87

610

3.28

12

0.78

29

12

9.8

38

90/15/75UC*

170

2.24

730

3.93

12

0.83

35

15

65

90/17.5/75UC*

198

2.61

840

4.59

13

0.87

41

17

8.3

100

90/20/75UC

227

2.98

960

5.24

14

0.91

47

20

7.7

160

100/5/75UC*

63.6

0.837

240

1.54

13

0.6

11

14

2.2

100/7.5/75UC*

95.4

1.26

340

2.32

13

0.69

16

7.5

12

7.6

100/10/75UC*

127

1.67

430

3.09

14

0.75

22

10

11

18

100/12.5/75UC*

159

2.09

540

3.86

14

0.81

27

13

9.9

35

100/15/75UC*

191

2.51

640

4.63

15

0.86

32

15

9.1

61

100/17.5/75UC*

222

2.93

760

5.41

16

0.91

38

18

8.5

97

100/20/75UC

254

3.35

860

6.18

16

0.95

43

20

140

100/22.5/75UC

286

3.77

970

6.95

17

0.99

49

23

7.5

210

110/7.5/75UC*

104

1.37

200

2.84

16

0.71

14

7.2

12

6.4

110/10/75UC*

139

1.83

260

3.79

17

0.78

18

9.6

11

15

110/12.5/75UC*

173

2.28

330

4.74

17

0.84

23

12

10

30

110/15/75UC*

208

2.74

390

5.68

18

0.89

27

14

9.2

51

110/17.5/75UC*

243

3.19

450

6.63

18

0.94

32

17

8.6

82

110/20/75UC*

277

3.65

510

7.58

19

0.98

37

19

8.1

120

110/22.5/75UC

312

4.11

540

8.53

20

41

22

7.5

170

110/25/75UC

347

4.56

720

9.47

20

1.1

46

24

7.5

240

125/10/75UC*

185

2.44

260

4.86

21

0.85

20

11

12

16

125/12.5/75UC*

231

3.04

330

6.08

22

0.92

24

14

11

32

125/15/75UC*

277

3.65

400

7.29

22

0.98

29

17

10

55

125/17.5/75UC*

323

4.26

420

8.51

23

34

20

87

125/20/75UC*

369

4.87

560

9.72

24

1.1

39

23

8.9

130

125/22.5/75UC*

416

5.48

560

10.9

25

1.1

44

26

8.1

190

125/25/75UC*

462

6.09

730

12.2

25

1.2

49

29

8.1

250

125/30/75UC

554

7.31

730

14.6

27

1.2

59

34

6.9

440

140/12.5/75UC*

269

3.54

230

7.68

27

0.97

22

10

15

11

28

140/15/75UC*

323

4.25

250

9.22

27

26

10

17

9.9

49

140/17.5/75UC*

376

4.96

330

10.8

28

1.1

30

10

20

9.6

77

140/20/75UC*

430

5.67

330

12.3

29

1.1

35

10

23

8.7

120

140/22.5/75UC*

484

6.38

430

13.8

30

1.2

39

10

26

8.6

160

140/25/75UC

538

7.09

430

15.4

31

1.2

43

10

29

7.9

220

140/30/75UC

645

8.5

550

18.4

32

1.3

52

10

35

7.4

390

140/35/75UC

753

9.92

680

21.5

34

1.4

60

10

41

6.9

620

All technical data are without warranty. Dimensions and design modifications reserved.
Coupling types marked with * are suitable for combination with Flexlink K8.

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

38 / 97

Geislinger Coupling

Axial
misalignment

PKW

K r

Cr

K a

Fa

K w

Cw

kW

mm

kN/mm

mm

kN

mrad

kNm/rad

160/12.5/75UC*

363

4.79

260

10

34

1.1

23

10

17

12

30

160/15/75UC*

436

5.75

260

12

35

1.1

28

10

21

11

52

160/17.5/75UC*

509

6.71

330

14

36

1.2

32

10

24

11

82

Bending
stiffness

Radial
stiffness

Td , p
kNm/bar

Angular
misalignment

Radial
misalignment

0
rad/s

Axial reaction
force

Perm. thermal
load

CTstat
MNm/rad

Characteristic
frequency of
coupling

TKN
kNm

Size

Static
torsional
stiffness

Perm.
damping
torque

Couplings Series 75UC

Nominal
torque

160/20/75UC*

581

7.67

420

16

37

1.3

37

10

28

10

120

160/22.5/75UC*

654

8.63

420

18

38

1.3

41

10

31

9.4

170

160/25/75UC*

727

9.59

420

20

39

1.3

46

10

35

8.6

240

160/30/75UC

872

11.5

530

24

41

1.4

55

10

42

7.9

410

160/35/75UC

1020

13.4

650

28

43

1.5

64

10

49

7.4

660

160/40/75UC

1160

15.3

790

32

44

1.6

74

10

56

7.1

980

180/15/75UC*

553

7.3

270

15.1

44

1.2

28

12

24

12

53

180/17.5/75UC*

645

8.52

340

17.6

45

1.3

33

12

28

11

84

180/20/75UC*

737

9.73

420

20.1

46

1.4

38

12

32

11

130

180/22.5/75UC*

829

11

420

22.6

47

1.4

42

12

36

9.9

180

180/25/75UC*

921

12.2

510

25.1

48

1.5

47

12

40

9.8

250

180/30/75UC*

1110

14.6

620

30.2

50

1.6

57

12

48

420

180/35/75UC

1290

17

620

35.2

52

1.6

66

12

56

7.9

670

180/40/75UC

1470

19.5

750

40.2

54

1.7

75

12

64

7.4

1000

180/45/75UC

1660

21.9

890

45.2

56

1.8

85

12

72

7.1

1400

Larger couplings are available on request.

All technical data are without warranty. Dimensions and design modifications reserved.
Coupling types marked with * are suitable for combination with Flexlink K8.

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

39 / 97

Geislinger Coupling

Axial
misalignment

PKW

K r

Cr

K a

Fa

K w

Cw

kW

mm

kN/mm

mm

kN

mrad

kNm/rad

36/2.2/120NC*

2.6

0.021

130

0.0945

1.7

0.21

2.3

0.6

12

0.09

36/3.3/120NC*

3.9

0.032

160

0.142

1.8

0.24

3.4

0.9

10

0.31

36/5/120NC*

5.9

0.049

200

0.215

1.9

0.27

5.2

1.3

8.5

1.1

36/7.5/120NC

8.85

0.073

280

0.322

2.1

0.31

7.8

3.6

41/2.2/120NC*

3.4

0.028

98

0.127

2.1

0.23

2.2

0.7

12

0.09

41/3.3/120NC*

5.1

0.042

110

0.191

2.3

0.26

3.3

11

0.3

41/5/120NC*

7.73

0.064

150

0.289

2.4

0.3

1.5

9.2

41/7.5/120NC

11.6

0.096

210

0.433

2.7

0.34

7.5

2.3

7.6

3.5
8.3

Bending
stiffness

Radial
stiffness

Td , p
kNm/bar

Angular
misalignment

Radial
misalignment

0
rad/s

Axial reaction
force

Perm. thermal
load

CTstat
MNm/rad

Characteristic
frequency of
coupling

TKN
kNm

Size

Static
torsional
stiffness

Perm.
damping
torque

Couplings Series 120NC

Nominal
torque

41/10/120NC

15.5

0.127

270

0.577

2.9

0.37

10

6.4

48/2.2/120NC*

4.82

0.04

91

0.167

2.9

0.25

2.5

0.8

12

0.1

48/3.3/120NC*

7.23

0.06

120

0.25

0.29

3.7

1.3

11

0.34

48/5/120NC*

11

0.091

160

0.379

3.2

0.33

5.6

1.9

9.6

1.2

48/7.5/120NC*

16.4

0.136

230

0.568

3.5

0.38

8.5

2.8

8.1

48/10/120NC

21.9

0.181

310

0.757

3.8

0.42

11

3.8

7.1

9.4

56/2.2/120NC*

6.86

0.057

94

0.225

3.9

0.29

2.7

13

0.11

56/3.3/120NC*

10.3

0.085

120

0.338

0.33

1.6

12

0.36

56/5/120NC*

15.6

0.129

160

0.512

4.3

0.37

6.1

2.4

10

1.3

56/7.5/120NC*

23.4

0.193

240

0.769

4.6

0.43

9.1

3.5

8.9

4.3

56/10/120NC

31.2

0.258

320

1.02

4.9

0.47

12

4.7

7.7

10

56/12.5/120NC

39

0.322

400

1.28

5.2

0.51

15

5.9

6.9

20

63/2.2/120NC*

9.12

0.075

92

0.282

4.9

0.31

2.9

1.2

13

0.12

63/3.3/120NC*

13.7

0.113

130

0.424

5.1

0.36

4.3

1.9

13

0.39

63/5/120NC*

20.7

0.171

180

0.642

5.3

0.41

6.6

2.8

11

1.4

63/7.5/120NC*

31.1

0.256

260

0.963

5.7

0.47

9.8

4.2

9.5

4.6

63/10/120NC*

41.4

0.342

350

1.28

0.52

13

5.6

8.4

11

63/12.5/120NC

51.8

0.427

440

1.6

6.4

0.56

16

7.5

21

63/15/120NC

62.2

0.512

510

1.93

6.8

0.59

20

8.5

6.8

37

72/3.3/120NC*

17.2

0.143

110

0.545

6.5

0.39

4.3

2.1

13

0.39

72/5/120NC*

26.1

0.216

140

0.826

6.8

0.44

6.5

3.1

11

1.4

72/7.5/120NC*

39.1

0.324

220

1.24

7.2

0.51

9.8

4.7

10

4.6

72/10/120NC*

52.1

0.432

290

1.65

7.7

0.56

13

6.3

8.8

11

72/12.5/120NC

65.2

0.54

350

2.07

8.1

0.6

16

7.8

7.9

21

72/15/120NC

78.2

0.648

430

2.48

8.5

0.64

20

9.4

7.2

37

80/5/120NC*

33.8

0.28

160

1.02

8.3

0.49

6.9

3.7

12

1.4

80/7.5/120NC*

50.7

0.419

240

1.53

8.8

0.56

10

5.5

11

4.8

80/10/120NC*

67.7

0.559

310

2.04

9.2

0.61

14

7.4

9.4

11

80/12.5/120NC*

84.6

0.699

390

2.56

9.7

0.66

17

9.2

8.5

22

80/15/120NC

101

0.839

460

3.07

10

0.7

21

11

7.8

39

80/17.5/120NC

118

0.979

550

3.58

11

0.74

24

13

7.2

62

All technical data are without warranty. Dimensions and design modifications reserved.
Coupling types marked with * are suitable for combination with Flexlink K8.

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

40 / 97

Geislinger Coupling

Axial
misalignment

PKW

K r

Cr

K a

Fa

K w

Cw

kW

mm

kN/mm

mm

kN

mrad

kNm/rad

Bending
stiffness

Radial
stiffness

Td , p
kNm/bar

Angular
misalignment

Radial
misalignment

0
rad/s

Axial reaction
force

Perm. thermal
load

CTstat
MNm/rad

Characteristic
frequency of
coupling

TKN
kNm

Static
torsional
stiffness

Size

Perm.
damping
torque

Couplings Series 120NC

Nominal
torque

90/5/120NC*

45

0.371

190

1.28

10

0.53

7.5

4.4

12

1.6

90/7.5/120NC*

67.5

0.557

290

1.92

11

0.61

11

6.7

11

5.3

90/10/120NC*

90

0.743

380

2.55

11

0.67

15

8.9

9.9

13

90/12.5/120NC*

113

0.929

470

3.19

12

0.72

19

11

25

90/15/120NC*

135

1.11

570

3.83

12

0.77

23

13

8.3

42

90/17.5/120NC

158

1.3

660

4.47

13

0.81

26

16

7.7

67

90/20/120NC

180

1.49

770

5.11

14

0.85

30

18

7.2

100

100/5/120NC*

48.2

0.398

140

1.53

13

0.55

6.3

4.2

13

1.3
4.4

100/7.5/120NC*

72.3

0.596

190

2.3

13

0.62

9.4

6.3

11

100/10/120NC*

96.4

0.795

260

3.07

14

0.69

13

8.4

10

10

100/12.5/120NC*

121

0.994

320

3.84

14

0.74

16

10

9.1

20

100/15/120NC*

145

1.19

390

4.6

15

0.79

19

13

8.4

35

100/17.5/120NC

169

1.39

450

5.37

16

0.83

22

15

7.8

56

100/20/120NC

193

1.59

520

6.14

16

0.87

25

17

7.3

84

100/22.5/120NC

217

1.79

570

6.9

17

0.9

28

19

6.8

120

110/7.5/120NC*

82.4

0.68

130

2.81

16

0.65

8.5

6.4

11

110/10/120NC*

110

0.906

170

3.74

17

0.72

11

8.5

10

9.5

110/12.5/120NC*

137

1.13

210

4.68

17

0.77

14

11

9.2

19

110/15/120NC*

165

1.36

250

5.62

18

0.82

17

13

8.5

32

110/17.5/120NC

192

1.59

300

6.55

18

0.87

20

15

51

110/20/120NC

220

1.81

330

7.49

19

0.9

23

17

7.4

76

110/22.5/120NC

247

2.04

380

8.42

20

0.94

26

19

110

110/25/120NC

275

2.27

420

9.36

20

0.97

28

21

6.6

150

125/10/120NC*

144

1.18

180

4.84

21

0.79

11

9.8

11

9.5

125/12.5/120NC*

179

1.48

220

6.06

22

0.85

14

12

9.9

19

125/15/120NC*

215

1.77

260

7.27

22

0.9

17

15

9.2

32

125/17.5/120NC*

251

2.07

300

8.48

23

0.95

20

17

8.6

51

125/20/120NC*

287

2.37

340

9.69

24

0.99

23

20

76

125/22.5/120NC

323

2.66

350

10.9

25

26

22

7.4

110

125/25/120NC

359

2.96

470

12.1

25

1.1

29

24

7.4

150

125/30/120NC

431

3.55

470

14.5

27

1.1

34

29

6.4

260

140/12.5/120NC*

214

1.76

160

7.61

27

0.9

13

10

13

10

17

140/15/120NC*

257

2.12

190

9.13

27

0.95

16

10

15

9.4

30

140/17.5/120NC*

299

2.47

220

10.7

28

19

10

18

8.8

48

140/20/120NC

342

2.82

220

12.2

29

21

10

21

7.9

71

140/22.5/120NC

385

3.17

290

13.7

30

1.1

24

10

23

7.9

100

140/25/120NC

428

3.53

290

15.2

31

1.1

27

10

26

7.3

140

140/30/120NC

513

4.23

380

18.3

32

1.2

32

10

31

6.8

240

140/35/120NC

599

4.94

480

21.3

34

1.3

37

10

36

6.5

380

All technical data are without warranty. Dimensions and design modifications reserved.
Coupling types marked with * are suitable for combination with Flexlink K8.

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

41 / 97

Geislinger Coupling

Axial
misalignment

PKW

K r

Cr

K a

Fa

K w

Cw

kW

mm

kN/mm

mm

kN

mrad

kNm/rad
19

Bending
stiffness

Radial
stiffness

Td , p
kNm/bar

Angular
misalignment

Radial
misalignment

0
rad/s

Axial reaction
force

Perm. thermal
load

CTstat
MNm/rad

Characteristic
frequency of
coupling

TKN
kNm

Static
torsional
stiffness

Size

Perm.
damping
torque

Couplings Series 120NC

Nominal
torque

160/12.5/120NC*

286

2.37

160

9.86

34

0.99

14

10

15

11

160/15/120NC*

344

2.85

210

11.8

35

1.1

17

10

19

11

32

160/17.5/120NC*

401

3.32

210

13.8

36

1.1

20

10

22

9.6

52

160/20/120NC*

458

3.8

280

15.8

37

1.2

23

10

25

9.5

77

160/22.5/120NC*

515

4.27

280

17.7

38

1.2

26

10

28

8.6

110

160/25/120NC

573

4.75

280

19.7

39

1.2

29

10

31

7.9

150

160/30/120NC

687

5.7

350

23.7

41

1.3

35

10

37

7.4

260

160/35/120NC

802

6.65

440

27.6

43

1.4

40

10

43

6.9

410

160/40/120NC

916

7.6

540

31.5

44

1.5

46

10

50

6.6

620

180/15/120NC*

437

3.61

200

14.9

44

1.1

18

12

21

11

33

180/17.5/120NC*

509

4.22

260

17.4

45

1.2

20

12

25

10

52

180/20/120NC*

582

4.82

330

19.9

46

1.3

23

12

28

10

78

180/22.5/120NC*

655

5.42

330

22.4

47

1.3

26

12

32

9.2

110

180/25/120NC*

728

6.02

330

24.8

48

1.3

29

12

35

8.5

150

180/30/120NC

873

7.23

410

29.8

50

1.4

35

12

42

7.8

260

180/35/120NC

1020

8.43

510

34.8

52

1.5

41

12

49

7.4

420

180/40/120NC

1160

9.63

620

39.8

54

1.6

47

12

56

620

180/45/120NC

1310

10.8

620

44.7

56

1.6

53

12

63

6.3

890

Larger couplings are available on request.

All technical data are without warranty. Dimensions and design modifications reserved.
Coupling types marked with * are suitable for combination with Flexlink K8.

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

42 / 97

Geislinger Coupling

Axial
misalignment

PKW

K r

Cr

K a

Fa

K w

Cw

kW

mm

kN/mm

mm

kN

mrad

kNm/rad
0.07

Bending
stiffness

Radial
stiffness

Td , p
kNm/bar

Angular
misalignment

Radial
misalignment

0
rad/s

Axial reaction
force

Perm. thermal
load

CTstat
MNm/rad

Characteristic
frequency of
coupling

TKN
kNm

Static
torsional
stiffness

Size

Perm.
damping
torque

Couplings Series 120HC

Nominal
torque

36/2.2/120HC*

1.99

0.016

92

0.0962

1.7

0.19

1.7

0.4

11

36/3.3/120HC*

2.99

0.025

110

0.144

1.8

0.22

2.6

0.7

9.5

0.24

36/5/120HC

4.52

0.037

140

0.219

1.9

0.25

7.9

0.83

36/7.5/120HC

6.79

0.056

180

0.328

2.1

0.28

1.5

6.3

2.8

41/2.2/120HC*

2.62

0.022

70

0.129

2.1

0.21

1.7

0.5

11

0.07
0.23

41/3.3/120HC*

3.92

0.032

81

0.194

2.3

0.24

2.5

0.8

10

41/5/120HC*

5.94

0.049

99

0.293

2.4

0.27

3.8

1.2

8.3

0.8

41/7.5/120HC

8.92

0.074

140

0.44

2.7

0.31

5.8

1.7

6.9

2.7

41/10/120HC

11.9

0.098

180

0.587

2.9

0.34

7.7

2.3

5.9

6.4

48/2.2/120HC*

3.74

0.031

65

0.17

2.9

0.23

1.9

0.6

11

0.08

48/3.3/120HC*

5.61

0.046

84

0.255

0.27

2.9

10

0.26

48/5/120HC*

8.49

0.07

110

0.386

3.2

0.31

4.4

1.5

9.1

0.91

48/7.5/120HC

12.7

0.105

150

0.579

3.5

0.35

6.5

2.2

7.5

3.1

48/10/120HC

17

0.14

210

0.771

3.8

0.39

8.7

2.9

6.6

7.3

56/2.2/120HC*

5.21

0.043

59

0.23

3.9

0.26

0.8

12

0.08

56/3.3/120HC*

7.82

0.065

76

0.345

0.3

3.1

1.2

11

0.28

56/5/120HC*

11.8

0.098

100

0.522

4.3

0.34

4.6

1.8

9.4

0.96

56/7.5/120HC*

17.8

0.147

150

0.783

4.6

0.39

6.9

2.7

3.3

56/10/120HC

23.7

0.196

190

1.04

4.9

0.43

9.3

3.6

7.7

56/12.5/120HC

29.6

0.245

230

1.31

5.2

0.46

12

4.5

6.3

15

63/2.2/120HC*

7.01

0.058

61

0.288

4.9

0.29

2.2

13

0.09

63/3.3/120HC*

10.5

0.087

79

0.432

5.1

0.33

3.3

1.4

12

0.3
1.1

63/5/120HC*

15.9

0.131

110

0.655

5.3

0.38

2.2

10

63/7.5/120HC*

23.9

0.197

160

0.982

5.7

0.43

7.6

3.2

8.7

3.5

63/10/120HC

31.9

0.263

220

1.31

0.48

10

4.3

7.7

8.4

63/12.5/120HC

39.8

0.328

260

1.64

6.4

0.51

13

5.4

6.8

16

63/15/120HC

47.8

0.394

300

1.96

6.8

0.54

15

6.5

6.2

28

72/3.3/120HC*

13.2

0.109

63

0.556

6.5

0.35

3.3

1.6

12

0.3

72/5/120HC*

20

0.166

94

0.843

6.8

0.41

2.4

11

72/7.5/120HC*

30

0.249

140

1.26

7.2

0.47

7.5

3.6

9.2

3.5

72/10/120HC*

40

0.332

170

1.69

7.7

0.51

10

4.8

8.3

72/12.5/120HC

50

0.414

220

2.11

8.1

0.55

12

7.2

16

72/15/120HC

60

0.497

270

2.53

8.5

0.59

15

7.2

6.7

28

80/5/120HC*

25.8

0.213

91

1.05

8.3

0.44

5.2

2.8

11

1.1

80/7.5/120HC*

38.7

0.32

140

1.57

8.8

0.51

7.9

4.2

9.7

3.7

80/10/120HC*

51.6

0.426

180

2.09

9.2

0.56

10

5.6

8.6

8.7

80/12.5/120HC

64.4

0.533

220

2.62

9.7

0.6

13

7.7

17

80/15/120HC

77.3

0.64

270

3.14

10

0.64

16

8.4

7.1

30

80/17.5/120HC

90.2

0.746

310

3.66

11

0.67

18

9.8

6.5

47

All technical data are without warranty. Dimensions and design modifications reserved.
Coupling types marked with * are suitable for combination with Flexlink K8.

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

43 / 97

Geislinger Coupling

Axial
misalignment

PKW

K r

Cr

K a

Fa

K w

Cw

kW

mm

kN/mm

mm

kN

mrad

kNm/rad

Bending
stiffness

Radial
stiffness

Td , p
kNm/bar

Angular
misalignment

Radial
misalignment

0
rad/s

Axial reaction
force

Perm. thermal
load

CTstat
MNm/rad

Characteristic
frequency of
coupling

TKN
kNm

Static
torsional
stiffness

Size

Perm.
damping
torque

Couplings Series 120HC

Nominal
torque

90/5/120HC*

34.6

0.286

110

1.31

10

0.49

5.8

3.4

12

1.2

90/7.5/120HC*

51.9

0.429

170

1.96

11

0.56

8.7

5.1

10

4.1

90/10/120HC*

69.2

0.572

230

2.61

11

0.62

12

6.8

9.2

9.7

90/12.5/120HC*

86.5

0.715

270

3.27

12

0.66

14

8.5

8.2

19

90/15/120HC

104

0.858

340

3.92

12

0.71

17

10

7.7

33

90/17.5/120HC

121

380

4.57

13

0.74

20

12

52

90/20/120HC

138

1.14

450

5.23

14

0.78

23

14

6.6

77

100/5/120HC*

36.8

0.303

80

1.57

13

0.5

4.8

3.2

11

1
3.4

100/7.5/120HC*

55.1

0.455

110

2.35

13

0.57

7.2

4.8

10

100/10/120HC*

73.5

0.606

140

3.14

14

0.63

9.6

6.4

9.1

100/12.5/120HC*

91.9

0.758

180

3.92

14

0.68

12

8.3

16
27

100/15/120HC

110

0.909

210

4.7

15

0.72

14

9.6

7.7

100/17.5/120HC

129

1.06

250

5.49

16

0.76

17

11

7.1

43

100/20/120HC

147

1.21

280

6.27

16

0.79

19

13

6.6

64
91

100/22.5/120HC

165

1.36

310

7.06

17

0.82

22

14

6.2

110/7.5/120HC*

62.5

0.516

77

2.86

16

0.6

6.5

4.8

10

110/10/120HC*

83.3

0.688

99

3.82

17

0.66

8.6

6.5

9.2

7.2

110/12.5/120HC*

104

0.86

120

4.77

17

0.71

11

8.1

8.5

14
24

110/15/120HC

125

1.03

140

5.73

18

0.75

13

9.7

7.8

110/17.5/120HC

146

1.2

170

6.68

18

0.79

15

11

7.2

39

110/20/120HC

167

1.38

190

7.64

19

0.83

17

13

6.8

58

110/22.5/120HC

187

1.55

210

8.59

20

0.86

19

15

6.4

82

110/25/120HC

208

1.72

230

9.55

20

0.89

22

16

6.1

110

125/10/120HC*

108

0.894

93

4.93

21

0.72

8.6

7.4

9.9

7.2

125/12.5/120HC*

136

1.12

110

6.16

22

0.77

11

9.2

14

125/15/120HC*

163

1.34

130

7.4

22

0.82

13

11

8.4

24

125/17.5/120HC

190

1.56

150

8.63

23

0.86

15

13

7.8

39

125/20/120HC

217

1.79

180

9.86

24

0.9

17

15

7.3

58

125/22.5/120HC

244

2.01

200

11.1

25

0.94

19

17

6.9

82

125/25/120HC

271

2.23

220

12.3

25

0.97

22

18

6.6

110

125/30/120HC

325

2.68

240

14.8

27

26

22

5.8

190

140/12.5/120HC*

163

1.34

87

7.78

27

0.82

10

10

9.8

9.2

13

140/15/120HC*

195

1.61

100

9.34

27

0.87

12

10

12

8.6

23

140/17.5/120HC*

228

1.88

120

10.9

28

0.92

14

10

14

8.1

36

140/20/120HC

261

2.15

140

12.4

29

0.96

16

10

16

7.6

54

140/22.5/120HC

293

2.42

160

14

30

18

10

18

7.2

77

140/25/120HC

326

2.69

160

15.6

31

20

10

20

6.6

110

140/30/120HC

391

3.22

210

18.7

32

1.1

24

10

24

6.2

180

140/35/120HC

456

3.76

270

21.8

34

1.2

28

10

28

290

All technical data are without warranty. Dimensions and design modifications reserved.
Coupling types marked with * are suitable for combination with Flexlink K8.

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

44 / 97

Geislinger Coupling

Axial
misalignment

PKW

K r

Cr

K a

Fa

K w

Cw

kW

mm

kN/mm

mm

kN

mrad

kNm/rad

160/12.5/120HC*

222

1.83

100

10

34

0.91

11

10

12

10

14

160/15/120HC*

266

2.2

120

12

35

0.96

13

10

14

9.5

25

160/17.5/120HC*

310

2.56

130

14

36

16

10

17

8.8

40

Bending
stiffness

Radial
stiffness

Td , p
kNm/bar

Angular
misalignment

Radial
misalignment

0
rad/s

Axial reaction
force

Perm. thermal
load

CTstat
MNm/rad

Characteristic
frequency of
coupling

TKN
kNm

Size

Static
torsional
stiffness

Perm.
damping
torque

Couplings Series 120HC

Nominal
torque

160/20/120HC*

355

2.93

180

16.1

37

1.1

18

10

19

8.7

59

160/22.5/120HC

399

3.3

180

18.1

38

1.1

20

10

22

7.9

85

160/25/120HC

443

3.66

180

20.1

39

1.1

22

10

24

7.3

120

160/30/120HC

532

4.4

230

24.1

41

1.2

27

10

29

6.8

200

160/35/120HC

620

5.13

290

28.1

43

1.3

31

10

34

6.5

320

160/40/120HC

709

5.86

290

32.1

44

1.3

36

10

38

5.7

480

180/15/120HC*

328

2.72

98

15.2

44

13

12

16

9.7

25

180/17.5/120HC*

383

3.17

130

17.7

45

1.1

15

12

18

9.5

39

180/20/120HC*

438

3.62

130

20.3

46

1.1

18

12

21

8.6

58

180/22.5/120HC*

492

4.08

170

22.8

47

1.2

20

12

24

8.5

83

180/25/120HC

547

4.53

170

25.4

48

1.2

22

12

26

7.8

110

180/30/120HC

657

5.44

210

30.4

50

1.3

26

12

32

7.3

200

180/35/120HC

766

6.34

270

35.5

52

1.4

31

12

37

6.9

310

180/40/120HC

875

7.25

270

40.6

54

1.4

35

12

42

6.1

470

180/45/120HC

985

8.16

330

45.6

56

1.5

39

12

47

5.9

670

Larger couplings are available on request.

All technical data are without warranty. Dimensions and design modifications reserved.
Coupling types marked with * are suitable for combination with Flexlink K8.

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

45 / 97

Geislinger Coupling

Axial
misalignment

PKW

K r

Cr

K a

Fa

K w

Cw

kW

mm

kN/mm

mm

kN

mrad

kNm/rad

Bending
stiffness

Radial
stiffness

Td , p
kNm/bar

Angular
misalignment

Radial
misalignment

0
rad/s

Axial reaction
force

Perm. thermal
load

CTstat
MNm/rad

Characteristic
frequency of
coupling

TKN
kNm

Static
torsional
stiffness

Size

Perm.
damping
torque

Couplings Series 120UC

Nominal
torque

36/2.2/120UC*

1.31

0.011

46

0.103

1.7

0.16

0.8

0.3

0.03

36/3.3/120UC*

1.97

0.016

47

0.154

1.8

0.19

1.3

0.4

8.2

0.12

36/5/120UC

2.99

0.025

54

0.233

1.9

0.22

1.9

0.6

6.9

0.4

36/7.5/120UC

4.48

0.037

69

0.35

2.1

0.25

2.9

0.9

5.6

1.4

41/2.2/120UC*

1.81

0.015

40

0.136

2.1

0.18

0.9

0.3

9.7

0.04

41/3.3/120UC*

2.71

0.022

43

0.203

2.3

0.21

1.4

0.5

8.8

0.13

41/5/120UC

4.1

0.034

50

0.308

2.4

0.24

2.1

0.7

7.4

0.44

41/7.5/120UC

6.16

0.051

64

0.462

2.7

0.27

3.1

1.1

1.5

41/10/120UC

8.21

0.068

83

0.617

2.9

0.3

4.2

1.4

5.2

3.5

48/2.2/120UC*

2.52

0.021

33

0.18

2.9

0.2

0.4

9.9

0.04

48/3.3/120UC*

3.78

0.031

35

0.27

0.23

1.5

0.6

8.9

0.13

48/5/120UC

5.73

0.047

45

0.409

3.2

0.27

2.2

0.9

7.9

0.47

48/7.5/120UC

8.59

0.071

61

0.614

3.5

0.31

3.4

1.3

6.6

1.6

48/10/120UC

11.5

0.095

77

0.818

3.8

0.34

4.5

1.7

5.7

3.7

56/2.2/120UC*

3.81

0.032

33

0.243

3.9

0.23

1.2

0.5

10

0.05

56/3.3/120UC*

5.71

0.047

40

0.364

0.27

1.8

0.8

9.8

0.16

56/5/120UC*

8.66

0.072

53

0.551

4.3

0.31

2.7

1.2

8.6

0.56

56/7.5/120UC

13

0.107

71

0.827

4.6

0.35

4.1

1.7

7.2

1.9

56/10/120UC

17.3

0.143

96

1.1

4.9

0.39

5.4

2.3

6.4

4.5

56/12.5/120UC

21.6

0.179

120

1.38

5.2

0.42

6.8

2.9

5.7

8.8

63/2.2/120UC*

4.93

0.041

31

0.306

4.9

0.26

1.2

0.6

11

0.05

63/3.3/120UC*

7.39

0.061

35

0.459

5.1

0.29

1.8

0.9

10

0.17
0.58

63/5/120UC*

11.2

0.093

49

0.695

5.3

0.34

2.8

1.3

9.2

63/7.5/120UC

16.8

0.139

65

1.04

5.7

0.38

4.2

7.7

63/10/120UC

22.4

0.185

85

1.39

0.42

5.6

2.7

6.8

4.6

63/12.5/120UC

28

0.232

110

1.74

6.4

0.46

3.4

6.2

9.1

63/15/120UC

33.6

0.278

130

2.08

6.8

0.48

8.4

5.5

16

72/3.3/120UC*

10.1

0.084

36

0.588

6.5

0.32

1.1

11

0.18

72/5/120UC*

15.3

0.127

49

0.89

6.8

0.37

3.1

1.7

9.6

0.64

72/7.5/120UC*

22.9

0.19

74

1.34

7.2

0.43

4.6

2.5

8.4

2.2

72/10/120UC

30.6

0.253

95

1.78

7.7

0.47

6.2

3.3

7.4

5.2

72/12.5/120UC

38.2

0.317

120

2.23

8.1

0.51

7.7

4.1

6.7

10

72/15/120UC

45.9

0.38

140

2.67

8.5

0.54

9.3

6.1

17

80/5/120UC*

20

0.165

50

1.1

8.3

0.41

3.3

10

0.69

80/7.5/120UC*

30

0.248

73

1.65

8.8

0.47

2.9

2.3

80/10/120UC

40

0.331

92

2.2

9.2

0.51

6.7

3.9

7.8

5.5

80/12.5/120UC

50

0.413

110

2.75

9.7

0.55

8.3

4.9

7.1

11

80/15/120UC

60

0.496

140

3.31

10

0.59

10

5.9

6.6

19

80/17.5/120UC

70

0.579

160

3.86

11

0.62

12

6.9

30

All technical data are without warranty. Dimensions and design modifications reserved.
Coupling types marked with * are suitable for combination with Flexlink K8.

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

46 / 97

Geislinger Coupling

Axial
misalignment

PKW

K r

Cr

K a

Fa

K w

Cw

kW

mm

kN/mm

mm

kN

mrad

kNm/rad

Bending
stiffness

Radial
stiffness

Td , p
kNm/bar

Angular
misalignment

Radial
misalignment

0
rad/s

Axial reaction
force

Perm. thermal
load

CTstat
MNm/rad

Characteristic
frequency of
coupling

TKN
kNm

Static
torsional
stiffness

Size

Perm.
damping
torque

Couplings Series 120UC

Nominal
torque

90/5/120UC*

24.9

0.205

41

1.4

10

0.44

3.2

2.2

10

0.67

90/7.5/120UC*

37.3

0.308

58

2.09

11

0.5

4.8

3.2

9.1

2.3

90/10/120UC*

49.8

0.411

76

2.79

11

0.55

6.4

4.3

8.1

5.4

90/12.5/120UC

62.2

0.514

93

3.49

12

0.59

8.1

5.4

7.4

10

90/15/120UC

74.7

0.616

110

4.19

12

0.63

9.7

6.5

6.8

18

90/17.5/120UC

87.1

0.719

130

4.89

13

0.66

11

7.6

6.3

29

90/20/120UC

99.5

0.822

150

5.58

14

0.7

13

8.6

43

100/5/120UC*

27.3

0.225

36

1.65

13

0.45

2.8

2.1

10

0.59

100/7.5/120UC*

41

0.338

48

2.48

13

0.52

4.2

3.2

9.2

100/10/120UC*

54.7

0.451

60

3.31

14

0.57

5.7

4.2

8.3

4.7

100/12.5/120UC

68.4

0.563

71

4.13

14

0.61

7.1

5.3

7.5

9.2

100/15/120UC

82

0.676

85

4.96

15

0.65

8.5

6.4

6.9

16

100/17.5/120UC

95.7

0.789

100

5.79

16

0.69

9.9

7.4

6.5

25

100/20/120UC

109

0.901

110

6.61

16

0.72

11

8.5

6.1

38

100/22.5/120UC

123

1.01

130

7.44

17

0.75

13

9.6

5.7

54

110/7.5/120UC*

43.5

0.359

29

3.04

16

0.53

3.4

2.9

1.6

110/10/120UC*

58

0.478

35

4.05

17

0.58

4.6

3.9

8.1

3.8

110/12.5/120UC

72.5

0.598

43

5.06

17

0.63

5.7

4.9

7.5

7.5
13

110/15/120UC

87

0.717

49

6.08

18

0.66

6.9

5.9

6.8

110/17.5/120UC

101

0.837

58

7.09

18

0.7

6.9

6.4

20

110/20/120UC

116

0.956

65

8.1

19

0.73

9.2

7.9

31

110/22.5/120UC

130

1.08

73

9.11

20

0.76

10

8.9

5.7

44

110/25/120UC

145

1.2

82

10.1

20

0.79

11

9.8

5.4

60

125/10/120UC*

71.9

0.596

29

5.24

21

0.62

4.4

4.3

8.5

3.7

125/12.5/120UC

89.9

0.745

36

6.55

22

0.67

5.6

5.4

7.8

7.2
13

125/15/120UC

108

0.894

42

7.86

22

0.71

6.7

6.5

7.2

125/17.5/120UC

126

1.04

49

9.17

23

0.75

7.8

7.5

6.8

20

125/20/120UC

144

1.19

56

10.5

24

0.79

8.9

8.6

6.4

30

125/22.5/120UC

162

1.34

63

11.8

25

0.82

10

9.7

6.1

42

125/25/120UC

180

1.49

70

13.1

25

0.85

11

11

5.7

58

125/30/120UC

216

1.79

82

15.7

27

0.9

13

13

5.2

100

140/12.5/120UC*

121

0.998

39

8.14

27

0.74

6.1

10

6.5

8.3

7.9

140/15/120UC

145

1.2

46

9.76

27

0.79

7.3

10

7.9

7.8

14

140/17.5/120UC

170

1.4

53

11.4

28

0.83

8.5

10

9.2

7.3

22

140/20/120UC

194

1.6

61

13

29

0.87

9.7

10

10

6.9

32

140/22.5/120UC

218

1.8

67

14.6

30

0.9

11

10

12

6.5

46

140/25/120UC

242

74

16.3

31

0.93

12

10

13

6.1

63

140/30/120UC

291

2.4

89

19.5

32

0.99

15

10

16

5.6

110

140/35/120UC

339

2.79

92

22.8

34

17

10

18

170

All technical data are without warranty. Dimensions and design modifications reserved.
Coupling types marked with * are suitable for combination with Flexlink K8.

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

47 / 97

Geislinger Coupling

Axial
misalignment

PKW

K r

Cr

K a

Fa

K w

Cw

kW

mm

kN/mm

mm

kN

mrad

kNm/rad
8.2

Bending
stiffness

Radial
stiffness

Td , p
kNm/bar

Angular
misalignment

Radial
misalignment

0
rad/s

Axial reaction
force

Perm. thermal
load

CTstat
MNm/rad

Characteristic
frequency of
coupling

TKN
kNm

Static
torsional
stiffness

Size

Perm.
damping
torque

Couplings Series 120UC

Nominal
torque

160/12.5/120UC*

159

1.32

36

10.6

34

0.81

6.3

10

7.6

9.1

160/15/120UC*

190

1.58

42

12.7

35

0.86

7.6

10

9.1

8.5

14

160/17.5/120UC

222

1.84

50

14.9

36

0.91

8.9

10

11

23
34

160/20/120UC

254

2.11

56

17

37

0.95

10

10

12

7.5

160/22.5/120UC

285

2.37

64

19.1

38

0.99

11

10

14

7.1

48

160/25/120UC

317

2.63

66

21.2

39

13

10

15

6.6

66

160/30/120UC

381

3.16

87

25.5

41

1.1

15

10

18

6.2

110

160/35/120UC

444

3.68

87

29.7

43

1.1

18

10

21

5.5

180

160/40/120UC

507

4.21

110

34

44

1.2

20

10

24

5.3

270
14

180/15/120UC*

238

1.98

40

16

44

0.93

7.6

12

10

180/17.5/120UC*

277

2.31

46

18.7

45

0.98

8.9

12

12

8.4

23

180/20/120UC

317

2.63

49

21.4

46

10

12

14

7.8

34

180/22.5/120UC

357

2.96

65

24.1

47

1.1

11

12

15

7.8

48

180/25/120UC

396

3.29

65

26.7

48

1.1

13

12

17

7.2

66

180/30/120UC

475

3.95

84

32.1

50

1.2

15

12

20

6.7

110

180/35/120UC

555

4.61

84

37.4

52

1.2

18

12

24

5.9

180

180/40/120UC

634

5.27

110

42.8

54

1.3

20

12

27

5.7

270

180/45/120UC

713

5.93

110

48.1

56

1.3

23

12

31

5.1

390

Larger couplings are available on request.

All technical data are without warranty. Dimensions and design modifications reserved.
Coupling types marked with * are suitable for combination with Flexlink K8.

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

48 / 97

Geislinger Coupling

Dimensions

Standard Coupling Type B

K
L

All technical data are without warranty. Modifications of dimensions and design reserved.

G
A

B
C

Dimensions
Type

Inertia

mm

36
41

48

56

63

2.2
3.3
5
7.5
2.2
3.3
5
7.5
10
2.2
3.3
5
7.5
10
2.2
3.3
5
7.5
10
12.5
2.2
3.3
5
7.5
10
12.5
15

87
98
115
140
93
104
121
146
171
102
113
130
155
180
117
128
145
170
195
220
125
136
153
178
203
228
253

246
257
275
300
277
288
305
330
355
317
328
345
370
395
352
363
380
405
430
455
372
383
400
425
450
475
500

80

360

210

295

22

27

100

155

240

285

90

410

240

295

25

30

110

175

275

325

105

480

280

340

30

35

130

195

305

360

115

560

315

390

32

37

150

220

345

405

120

630

355

430

35

40

170

250

385

460

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

49 / 97

inner outer
kgm2
0.12
0.13
0.13
0.14
0.20
0.20
0.21
0.22
0.23
0.43
0.44
0.45
0.47
0.48
0.84
0.85
0.87
0.90
0.93
0.97
1.39
1.40
1.45
1.50
1.55
1.60
1.65

1.3
1.4
1.6
1.9
2.2
2.5
2.8
3.3
3.8
4.7
5.1
5.7
6.6
7.5
9.4
10.1
11.3
13.0
14.7
16.4
16.4
17.6
19.4
22.1
24.8
27.5
30.2

Weight
inner

outer
kg

total

21
22
24
27
31
32
34
37
40
49
50
53
57
61
71
74
78
84
90
96
98
101
106
113
120
127
134

75
82
92
107
108
116
130
150
170
151
165
185
215
245
230
248
275
315
355
395
340
359
390
435
480
525
570

96
104
116
134
139
148
164
187
210
200
215
238
272
306
301
322
353
399
445
491
438
460
496
548
600
652
704

Geislinger Coupling

Standard Coupling Type B

K
L

All technical data are without warranty. Modifications of dimensions and design reserved.

G
A

B
C

Dimensions
Type

72

80

90

100

3.3
5
7.5
10
12.5
15
5
7.5
10
12.5
15
17.5
5
7.5
10
12.5
15
17.5
20
5
7.5
10
12.5
15
17.5
20
22.5

143
160
185
210
235
260
169
194
219
244
269
294
177
202
227
252
277
302
327
185
210
235
260
285
310
335
360

408
425
450
475
500
525
460
485
510
535
560
585
495
520
545
570
595
620
645
530
555
580
605
630
655
680
705

F
G
mm

Inertia
H

135

720

400

475

40

45

190

280

440

525

150

800

445

530

45

50

210

315

490

580

155

900

500

590

50

55

240

350

580

670

165

1000

560

660

55

60

270

395

645

735

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

50 / 97

inner outer
kgm2
2.47
2.50
2.55
2.60
2.65
2.75
4.0
4.2
4.4
4.6
4.7
4.9
7.2
7.4
7.6
7.8
8.0
8.3
8.5
11.9
12.3
12.7
13.1
13.5
13.9
14.2
14.6

30
33
38
43
48
53
60
66
72
79
85
92
99
110
121
132
143
154
165
156
173
190
207
224
241
258
275

Weight
inner

outer
kg

total

133
140
150
160
170
180
200
210
220
230
240
250
260
275
290
305
320
335
350
345
365
385
405
425
445
465
485

494
535
595
655
715
775
675
755
835
915
995
1075
925
1025
1125
1225
1325
1425
1525
1225
1345
1465
1585
1705
1825
1945
2065

627
675
745
815
885
955
875
965
1055
1145
1235
1325
1185
1300
1415
1530
1645
1760
1875
1570
1710
1850
1990
2130
2270
2410
2550

Geislinger Coupling

Standard Coupling Type B

K
L

All technical data are without warranty. Modifications of dimensions and design reserved.

G
A

B
C
Dimensions
Type

Inertia
H

mm

110

125

140

160

7.5
10
12.5
15
17.5
20
22.5
25
10
12.5
15
17.5
20
22.5
25
30
12.5
15
17.5
20
22.5
25
30
35
12.5
15
17.5
20
22.5
25
30
35
40

224
249
274
299
324
349
374
399
242
267
292
317
342
367
392
442
284
309
334
359
384
409
459
509
299
324
349
374
399
424
474
524
574

615
640
665
690
715
740
765
790
610
635
660
685
710
735
760
810
785
810
835
860
885
910
960
1010
865
890
915
940
965
990
1040
1090
1140

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

190

1100

610

730

65

70

290

430

715

840

205

1250

700

830

75

80

330

485

830

935

230

1400

775

920

80

85

370

515

900

1050

260

1600

885

1050

95

100

430

605

1020

1160

Coupling Catalog Version 17.6

51 / 97

Weight

inner outer
kgm2

inner

outer
kg

total

21.2
21.7
22.2
22.7
23.2
23.7
24.2
24.7
40
41
42
43
44
45
46
47
69
70
71
72
73
74
77
80
134
136
138
140
142
144
149
153
158

520
540
560
580
600
620
640
660
740
770
800
830
860
890
920
980
1020
1060
1100
1140
1180
1220
1290
1360
1510
1560
1610
1660
1710
1760
1850
1940
2030

1785
1930
2075
2220
2365
2510
2655
2800
2450
2650
2850
3050
3250
3450
3650
4000
3650
3880
4110
4340
4570
4800
5250
5700
5100
5400
5700
6000
6300
6600
7200
7800
8400

2305
2470
2635
2800
2965
3130
3295
3460
3190
3420
3650
3880
4110
4340
4570
4980
4670
4940
5210
5480
5750
6020
6540
7060
6610
6960
7310
7660
8010
8360
9050
9740
10430

280
305
330
355
380
405
430
455
510
550
590
630
670
710
750
835
890
960
1030
1100
1170
1240
1370
1500
1580
1700
1820
1940
2060
2180
2410
2640
2870

Geislinger Coupling

Standard Coupling Type B

K
L

All technical data are without warranty. Modifications of dimensions and design reserved.

G
A

B
C

Dimensions
Type

Inertia
H

mm

180

15
17.5
20
22.5
25
30
35
40
45

344
369
394
419
444
494
544
594
644

960
985
1010
1035
1060
1110
1160
1210
1260

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

280

1800

990

1180

105

Coupling Catalog Version 17.6

110

480

52 / 97

650

1160

1350

inner outer
kgm2
237
241
244
248
251
258
265
273
280

3020
3200
3380
3560
3740
4100
4460
4820
5180

Weight
inner

outer
kg

total

2160
2220
2280
2340
2400
2520
2630
2750
2860

7150
7550
7950
8350
8750
9550
10350
11150
11950

9310
9770
10230
10690
11150
12070
12980
13900
14810

Geislinger Coupling

Standard Coupling Type BC

K
L

All technical data are without warranty. Modifications of dimensions and design reserved.

G
H
B
C
Dimensions
Type

36
41

48

56

63

2.2
3.3
5
7.5
2.2
3.3
5
7.5
10
2.2
3.3
5
7.5
10
2.2
3.3
5
7.5
10
12.5
2.2
3.3
5
7.5
10
12.5
15

87
98
115
140
93
104
121
146
171
102
113
130
155
180
117
128
145
170
195
220
125
136
153
178
203
228
253

167
178
195
220
187
198
215
240
265
212
223
240
265
290
237
248
265
290
315
340
252
263
280
305
330
355
380

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

G
mm

Inertia
H

360

210

260

22

40

100

190

410

450

410

240

295

25

45

110

200

465

510

480

280

340

30

50

130

230

545

595

560

315

390

32

55

150

270

630

685

630

355

430

35

60

170

300

715

780

Coupling Catalog Version 17.6

53 / 97

inner outer
kgm2
0.12
0.13
0.13
0.14
0.20
0.20
0.21
0.22
0.23
0.43
0.44
0.45
0.47
0.48
0.84
0.85
0.87
0.90
0.93
0.97
1.39
1.42
1.45
1.50
1.55
1.60
1.65

1.8
2.0
2.2
2.5
3.3
3.6
3.9
4.4
4.9
7.0
7.4
8.0
8.9
9.8
13.7
14.9
15.6
17.3
19.0
20.7
24.6
25.8
27.6
30.3
33.0
35.7
38.4

Weight
inner

outer
kg

total

21
22
24
27
31
32
34
37
40
49
50
53
57
61
71
74
78
84
90
96
98
101
106
113
120
127
134

77
83
94
108
108
117
130
150
170
156
170
190
220
250
235
253
280
320
360
400
355
374
405
450
495
540
585

98
105
118
135
130
149
164
187
210
205
220
243
277
311
306
327
358
404
450
496
453
475
511
563
615
667
719

Geislinger Coupling

Standard Coupling Type BC

K
L

All technical data are without warranty. Modifications of dimensions and design reserved.

G
H
B
C
Dimensions
Type

72

80

90

100

3.3
5
7.5
10
12.5
15
5
7.5
10
12.5
15
17.5
5
7.5
10
12.5
15
17.5
20
5
7.5
10
12.5
15
17.5
20
22.5

143
160
185
210
235
260
169
194
219
244
269
294
177
202
227
252
277
302
327
185
210
235
260
285
310
335
360

273
290
315
340
365
390
310
335
360
385
410
435
340
365
390
415
440
465
490
365
390
415
440
465
490
515
540

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

G
mm

Inertia
H

720

400

475

40

64

190

335

810

885

800

445

530

45

69

210

370

900

975

900

500

590

50

74

240

460

1000

1085

1000

560

660

55

79

270

510

1115

1210

Coupling Catalog Version 17.6

54 / 97

inner
outer
kgm2
2.47
2.50
2.55
2.60
2.65
2.75
4.0
4.2
4.4
4.6
4.7
4.9
7.2
7.4
7.6
7.8
8.0
8.3
8.5
11.9
12.3
12.7
13.1
13.5
13.9
14.2
14.6

44
47
52
57
62
67
79
86
93
100
106
113
130
141
152
163
174
185
196
209
226
243
260
277
294
311
328

Weight
inner

outer
kg

total

133
140
150
160
170
180
200
210
220
230
240
250
260
275
290
305
320
335
350
345
365
385
405
425
445
465
485

509
550
610
670
730
790
680
760
840
920
1000
1080
900
1000
1100
1200
1300
1400
1500
1200
1320
1440
1560
1680
1800
1920
2040

642
690
760
830
900
970
880
970
1060
1150
1240
1330
1160
1275
1390
1505
1620
1735
1850
1545
1685
1825
1965
2105
2245
2385
2525

Geislinger Coupling

Standard Coupling Type BC

K
L

All technical data are without warranty. Modifications of dimensions and design reserved

G
H
B
C
Dimensions
Type

110

125

140

160

7.5
10
12.5
15
17.5
20
22.5
25
10
12.5
15
17.5
20
22.5
25
30
12.5
15
17.5
20
22.5
25
30
35
12.5
15
17.5
20
22.5
25
30
35
40

224
249
274
299
324
349
374
399
242
267
292
317
342
367
392
442
284
309
334
359
384
409
459
509
299
324
349
374
399
424
474
524
574

425
450
475
500
525
550
575
600
485
510
535
560
585
610
635
685
555
580
605
630
655
680
730
780
605
630
655
680
705
730
780
830
880

G
mm

Inertia
I

1100

610

730

65

89

290

555

1225

1330

1250

700

830

75

92

330

635

1400

1530

1400

775

920

80

94

370

695

1540

1660

1600

885

1050

95

104

430

780

1770

1900

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

55 / 97

Weight

inner outer
kgm2

inner

outer
kg

total

21.2
21.7
22.2
22.7
23.2
23.7
24.2
24.7
40
41
42
43
44
45
46
47
69
70
71
72
73
74
77
80
134
136
138
140
142
144
149
153
158

520
540
560
580
600
620
640
660
740
770
800
830
860
890
920
980
1020
1060
1100
1140
1180
1220
1290
1360
1510
1560
1610
1660
1710
1760
1850
1940
2030

1725
1870
2015
2160
2305
2450
2595
2740
2300
2500
2700
2900
3100
3300
3500
3850
3400
3630
3860
4090
4320
4550
5000
5450
4750
5050
5350
5650
5950
6250
6850
7450
8050

2245
2410
2575
2740
2905
3070
3235
3400
3040
3270
3500
3730
3960
4190
4420
4830
4420
4690
4960
5230
5500
5770
6290
6810
6260
6610
6960
7310
7660
8010
8700
9390
10080

360
385
410
435
460
485
510
535
640
680
720
760
800
840
880
965
1110
1170
1230
1290
1350
1410
1540
1670
1970
2080
2190
2300
2410
2520
2750
2980
3210

Geislinger Coupling

Standard Coupling Type BC

K
L

All technical data are without warranty. Modifications of dimensions and design reserved.

G
H
B
C
Dimensions
Type

18
0

15
17.5
20
22.5
25
30
35
40
45

344
369
394
419
444
494
544
594
644

680
705
730
755
780
830
880
930
980

1800

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

990

1180

G
mm

105

Inertia
H

119

Coupling Catalog Version 17.6

480

900

56 / 97

1970

2110

inner outer
kgm2
237
241
244
248
251
258
265
273
280

3540
3720
3900
4080
4260
4620
4980
5340
5700

Weight
inner

outer
kg

total

2160
2220
2280
2340
2400
2520
2630
2750
2860

6550
6950
7350
7750
8150
8950
9750
10550
11350

8710
9170
9630
10090
10550
11470
12380
13300
14210

Geislinger Coupling

Standard Coupling Type BE

All technical data are without warranty. Modifications of dimensions and design reserved.

G
B
C

Dimensions
Type

36
41

48

56

63

2.2
3.3
5
7.5
2.2
3.3
5
7.5
10
2.2
3.3
5
7.5
10
2.2
3.3
5
7.5
10
12.5
2.2
3.3
5
7.5
10
12.5
15

92
103
120
145
98
109
126
151
176
112
123
140
165
190
125
136
153
178
203
228
135
146
163
188
213
238
263

172
183
200
225
192
203
220
245
270
222
233
250
275
300
247
258
275
300
325
350
262
273
290
315
340
365
390

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

G
mm

Inertia
H

360

210

260

22

100

190

245

290

410

240

295

25

110

200

275

330

480

280

340

30

130

230

305

365

560

315

390

32

150

270

345

425

630

355

430

35

170

300

385

465

Coupling Catalog Version 17.6

57 / 97

inner outer
kgm2
0.12
0.13
0.13
0.14
0.20
0.20
0.21
0.22
0.23
0.43
0.44
0.45
0.47
0.48
0.84
0.85
0.87
0.90
0.93
0.97
1.40
1.42
1.45
1.50
1.55
1.60
1.65

1.1
1.3
1.5
1.8
2.0
2.3
2.6
3.1
3.6
4.6
5.0
5.6
6.5
7.4
9.1
9.8
11.0
12.7
14.4
16.1
15.8
17.0
18.8
21.5
24.2
26.9
29.6

Weight
inner

outer
kg

total

21
22
24
27
31
32
34
37
40
49
50
53
57
61
71
74
78
84
90
96
98
101
106
113
120
127
134

61
68
79
94
88
96
110
130
150
131
145
165
195
225
195
213
240
280
320
360
293
314
345
390
435
480
525

82
90
103
121
119
128
144
167
190
180
195
218
252
286
266
287
318
364
410
456
391
415
451
503
555
607
659

Geislinger Coupling

Standard Coupling Type BE

All technical data are without warranty. Modifications of dimensions and design reserved.

G
B
C

Dimensions
Type

72

80

90

100

3.3
5
7.5
10
12.5
15
5
7.5
10
12.5
15
17.5
5
7.5
10
12.5
15
17.5
20
5
7.5
10
12.5
15
17.5
20
22.5

150
175
200
225
250
275
184
209
234
259
284
309
192
217
242
267
292
317
342
200
225
250
275
300
325
350
375

280
305
330
355
380
405
325
350
375
400
425
450
355
380
405
430
455
480
505
380
405
430
455
480
505
530
555

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

G
mm

Inertia
H

720

400

475

40

190

335

440

535

800

445

530

45

210

370

490

585

900

500

590

50

240

460

580

675

1000

560

660

55

270

510

645

755

Coupling Catalog Version 17.6

58 / 97

inner
outer
kgm2
2.47
2.50
2.55
2.60
2.65
2.75
4.0
4.2
4.4
4.6
4.7
4.9
7.2
7.4
7.6
7.8
8.0
8.3
8.5
11.9
12.3
12.7
13.1
13.5
13.9
14.2
14.6

30
33
38
43
48
53
57
64
71
78
84
91
95
106
117
128
139
150
161
149
166
183
200
217
234
251
268

Weight
inner

outer
kg

total

133
140
150
160
170
180
200
210
220
230
240
250
260
275
290
305
320
335
350
345
365
385
405
425
445
465
485

439
480
540
600
660
720
590
670
750
830
910
990
790
890
990
1090
1190
1290
1390
1040
1160
1280
1400
1520
1640
1760
1880

572
620
690
760
830
900
790
880
970
1060
1150
1240
1050
1165
1280
1395
1510
1625
1740
1385
1525
1665
1805
1945
2085
2225
2365

Geislinger Coupling

Standard Coupling Type BE

All technical data are without warranty. Modifications of dimensions and design reserved

G
B
C
Dimensions
Type

110

125

140

160

7.5
10
12.5
15
17.5
20
22.5
25
10
12.5
15
17.5
20
22.5
25
30
12.5
15
17.5
20
22.5
25
30
35
12.5
15
17.5
20
22.5
25
30
35
40

234
259
284
309
334
359
384
409
266
291
316
341
366
391
416
466
304
329
354
379
404
429
479
529
319
344
369
394
419
444
494
544
594

435
460
485
510
535
560
585
610
510
535
560
585
610
635
660
710
575
600
625
650
675
700
750
800
625
650
675
700
725
750
800
850
900

G
mm

Inertia

1100

610

730

65

290

555

715

830

1250

700

830

75

330

635

830

940

1400

775

920

80

370

695

900

1030

1600

885

1050

95

430

780

1020

1160

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

59 / 97

Weight

inner outer
kgm2

inner

outer
kg

total

21.2
21.7
22.2
22.7
23.2
23.7
24.2
24.7
40
41
42
43
44
45
46
47
69
70
71
72
73
74
77
80
134
136
138
140
142
144
149
153
158

520
540
560
580
600
620
640
660
740
770
800
830
860
890
920
980
1020
1060
1100
1140
1180
1220
1290
1360
1510
1560
1610
1660
1710
1760
1850
1940
2030

1465
1610
1755
1900
2045
2190
2335
2480
2100
2300
2500
2700
2900
3100
3300
3650
3100
3330
3560
3790
4020
4250
4700
5150
4300
4600
4900
5200
5500
5800
6400
7000
7600

1985
2150
2315
2480
2645
2810
2975
3140
2840
3070
3300
3530
3760
3990
4220
4630
4120
4390
4660
4930
5200
5470
5990
6510
5810
6160
6510
6860
7210
7560
8250
8940
9630

255
280
305
330
355
380
405
430
490
530
570
610
650
690
730
815
840
910
980
1050
1120
1190
1320
1450
1490
1610
1730
1850
1970
2090
2320
2550
2780

Geislinger Coupling

Standard Coupling Type BE

All technical data are without warranty. Modifications of dimensions and design reserved.

G
B
C

Dimensions
Type

180

15
17.5
20
22.5
25
30
35
40
45

359
384
409
434
459
509
559
609
659

700
725
750
775
800
850
900
950
1000

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

1800

990

1180

G
mm

105

Inertia
H

Coupling Catalog Version 17.6

480

900

60 / 97

1160

1320

inner outer
kgm2
238
241
244
248
251
258
265
273
280

2780
2960
3140
3320
3500
3860
4220
4580
4940

Weight
inner

outer
kg

total

2160
2220
2280
2340
2400
2520
2630
2750
2860

5850
6250
6650
7050
7450
8250
9050
9850
10650

8010
8470
8930
9390
9850
10770
11680
12600
13510

Geislinger Coupling

Examples

Geislinger standard B Coupling between engine and gear box

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

61 / 97

Geislinger Coupling

Geislinger BC Coupling

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

62 / 97

Geislinger Coupling

Geislinger BC Coupling without axial thrust

Oil supply

Oil return

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

63 / 97

Geislinger Coupling

Geislinger BC Coupling + clutch

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

64 / 97

Geislinger Coupling

Geislinger BE Coupling + clutch

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

65 / 97

Geislinger Coupling

Geislinger BE Coupling with two flange hubs; without

pressurized oil supply (oil filled)

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

66 / 97

Geislinger Coupling

Geislinger BE Dual Coupling with one flange hub

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

67 / 97

Geislinger Coupling

Geislinger BE Coupling for CRP application

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

68 / 97

Geislinger Coupling

Geislinger BE Coupling combined with Geislinger Damper

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

69 / 97

Geislinger Coupling

Geislinger BE Coupling - oil filled with integrated flywheel

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

70 / 97

Geislinger Coupling
Geislinger BE Coupling - oil supplied for single bearing generator set

Oil return

Oil supply

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

71 / 97

Geislinger Coupling

Geislinger C Coupling - inside the gearbox

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

72 / 97

Geislinger Coupling

Geislinger C Coupling - gear integrated

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

73 / 97

Geislinger Coupling

Geislinger C Coupling with non-rotating oil supply

Oil supply
to coupling

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

74 / 97

Geislinger Coupling
Geislinger E Coupling; without pressurized oil supply (oil filled)

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

75 / 97

Geislinger Coupling

Geislinger C Coupling between engine and gearbox; without

pressurized oil supply (oil filled)

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

76 / 97

Geislinger Coupling

Geislinger BE Coupling for torque converter

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

77 / 97

Geislinger Coupling

Geislinger C Coupling for gear drive

combined with Geislinger Damper

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

78 / 97

Geislinger Coupling

Geislinger C Coupling for gear drive

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

79 / 97

Geislinger Coupling

Geislinger C Coupling for generator set

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

80 / 97

Geislinger Coupling

Geislinger F Coupling with flywheel

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

81 / 97

Geislinger Coupling

Geislinger F Coupling with integrated flywheel

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

82 / 97

Geislinger Coupling

Geislinger F Coupling with integrated flywheel

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

83 / 97

Geislinger Coupling

Geislinger BE Coupling with integrated flywheel

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

84 / 97

Geislinger Coupling

Geislinger BC Coupling with oil adapter

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

85 / 97

Geislinger Coupling

Geislinger BE Coupling with integrated flywheel

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

86 / 97

Geislinger Coupling

Geislinger F Coupling with bearing housing

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

87 / 97

Geislinger Coupling

Lightweight Gesilco BI Coupling + integrated Geislinger C

Coupling - connected to splined gear input shaft

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

88 / 97

Geislinger Coupling

Lightweight Gesilco BF Coupling +

integrated Geislinger BE Coupling

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

89 / 97

Geislinger Coupling

Geislinger BE Coupling + Geislinger Gesilco CI Coupling

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

90 / 97

Geislinger Coupling

Geislinger F Coupling + Geislinger Gesilco BF Coupling

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

91 / 97

Geislinger Coupling

Geislinger F Coupling + Geislinger Gesilco CS Coupling

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

92 / 97

Geislinger Coupling

Geislinger BE Coupling with integrated flywheel + CS Coupling

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

93 / 97

Geislinger Coupling

Geislinger BC Coupling + Geislinger Flexlink F8

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

94 / 97

Geislinger Coupling

Geislinger BC Coupling + Geislinger Flexlink K8

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

95 / 97

Geislinger Coupling

Geislinger BE Coupling + Geislinger Flexlink T6

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

96 / 97

Geislinger Coupling

Geislinger BE Coupling + Geislinger Flexlink K8

Geislinger GmbH, 5300 Hallwang, Austria

June 2013

Coupling Catalog Version 17.6

97 / 97

Geislinger Coupling

Geislinger Carbotorq

Geislinger Damper

Geislinger Coupling
Geislinger Monitoring

Geislinger Vdamp

Geislinger Flexlink

Geislinger Gesilco

Geislinger GmbH, Hallwanger Landesstrasse 3, 5300 Hallwang/Salzburg, Austria, Tel. +43 662 669 99-0, Fax +43 662 669 99-40, [email protected]
geislinger.com