Scribd
Upload
706 views

Netapp

The document provides step-by-step instructions for configuring a NetApp storage environment including creating aggregates, Vservers, volumes, LIFs, shares, export policies, SnapMirror relationships, and enabling AutoSupport. Key steps include creating an aggregate with 5 disks, setting up a Vserver domain and user credentials, enabling NFS and CIFS protocols, creating volumes, configuring LIFs and shares, setting export policies, initializing SnapMirror relationships between volumes, and configuring AutoSupport.

Uploaded by

Rodrigo Tocantins
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
706 views

Netapp

The document provides step-by-step instructions for configuring a NetApp storage environment including creating aggregates, Vservers, volumes, LIFs, shares, export policies, SnapMirror relationships, and enabling AutoSupport. Key steps include creating an aggregate with 5 disks, setting up a Vserver domain and user credentials, enabling NFS and CIFS protocols, creating volumes, configuring LIFs and shares, setting export policies, initializing SnapMirror relationships between volumes, and configuring AutoSupport.

Uploaded by

Rodrigo Tocantins
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 135

e0f

\temp\sysmgr-setup-3-0-win.exe
3.0
storage aggregate create -aggregate n01_aggr1 -node netappu-01 -diskcount 5
three disks
five
five
, Select disk
click Create
English.UTF8
Check DNS Configuration, clique em Submit & Continue
Uncheck - - Retain the Cifs data lifs configuration for NFS clients
Fill, the fields as below. CFS - netappu-01 / NFS - netappu-02
Cifs Configurations, Domain = labnetapp.local, User = Administrator, Password = Netapp123
Join the vserver on Domain
click submit & continue
14
On vserver Administration (optional) clique Skip, click Submit & Continue..
15. New Vserver created, click OK
check informations below
new Vserver Created and protocols enabled
16.
to enable Cifs and Unix users access.
Select Vservers,vs2 > configuration, local Users and Groups > Unix
Select Users, Add User > administrator > D = 10, group = root > Add
400 MB
vs2
net use * \\vs2\rootdir
net use * \\vs2\vol1
cifs share show
Warning: The specified path "/vs2vol1" does not exist in the namespace belonging to Vserver "vs2".
Do you want to continue? {y|n}: y
vs2
vs2
vs2
cd .. <enter> pwd <enter>
Verify the Export policy and create new policy
vserver export-policy rule show
export-policy rule create -vserver vs2 -policyname default -clientmatch 0.0.0.0/0 -rorule any -rwrule any -allow-suid true
-allow-dev true -protocol nfs,nfs3 -superuser any
Verify informations like below
Click > Submit & Continue
fill out the fields as below
Click Submit & Continue
Mark * Review or modify Lifs as below
Submit & Continue
Administrator Details user default, password = @Netapp123, Uncheck, create a new lif for Vserver * -
Click Submit & Continue , check summary page e click OK
Create a new Volume to contain the iscsi lun as below, click next
Click nitiators, set initiators address from host click ok and save and close
vs2
snapmirror update -source-path netappu://vs2/vs2_root -destination-path netappu://vs2/vs2_root_dp1
snapmirror update -source-path netappu://vs2/vs2_root -destination-path netappu://vs2/vs2_root_dp2
192.168.10.55
255.255.255.0
LABNETAPP.LOCAL
192.168.10.20
192.168.10.54
255.255.255.0
1
other-01
Netapp123
Netapp123
192.168.10.177 / 255.255.255.0
192.168.10.175 / 255.255.255.0
192.168.10.176 / 255.255.255.0
Click Create
>> Mirror
vs9 is the Destination, check other steps below
Click Browse to select source Volume vs2_vol01
click Select
Select Destination Volume, choice (new Volume) = vs9_vol01 and (aggr2)
vs9_vol01
nitialize Relationship
Click Create, check summary
click OK
vs2
vs2
vs2
vs2
Basic Commands to check Storage Environments
Check Broken Disks
netappu::> system node run -node * vol status -f
2 entries were acted on.
Node: netappu-01
Broken disks (empty)
Node: netappu-02
Broken disks (empty)
Check all disks status, spares, data, parity
netappu::> system node run -node * sysconfig -r
Configure AutoSupport, select nodes, configuration, AutoSupport

You might also like