Scribd
Upload
247 views

Cisco Router Configuration Commands

This document provides Cisco router configuration, show, copy, and debug commands including how to set passwords, enable interfaces, configure routing protocols, copy configurations, and enable debugging. Example commands are given to set console and telnet passwords, configure IP addresses and routing, copy configurations between DRAM, NVRAM and TFTP, and debug routing protocols.

Uploaded by

Aathi Hari
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
247 views

Cisco Router Configuration Commands

This document provides Cisco router configuration, show, copy, and debug commands including how to set passwords, enable interfaces, configure routing protocols, copy configurations, and enable debugging. Example commands are given to set console and telnet passwords, configure IP addresses and routing, copy configurations between DRAM, NVRAM and TFTP, and debug routing protocols.

Uploaded by

Aathi Hari
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Cisco Router Configuration Commands

Requirement Cisco Command


Set a console password to cisco Router(config)#line con 0
Router(config-line)#login
Router(config-line)#password cisco
Set a telnet password Router(config)#line vty 0 4
Router(config-line)#login
Router(config-line)#password cisco
Stop console timing out Router(config)#line con 0
Router(config-line)#exec-timeout 0 0
Set the enable password to cisco Router(config)#enable password cisco
Set the enable secret password to
peter.
This password overrides the
enable password and is
encypted within the config file
Router(config)#enable secret peter
Enable an interface Router(config-if)#no shutdown
To disable an interface Router(config-if)#shutdown
Set the clock rate for a router
with a DCE cable to 64K
Router(config-if)clock rate 64000
Set a logical bandwidth
assignment of 64K to the serial
interface
Router(config-if)bandwidth 64
Note that the zeroes are not missing
To add an IP address to a
interface
Router(config-if)#ip addr 10.1.1.1 255.255.255.0
To enable RIP on all 172.16.x.y
interfaces
Router(config)#router rip
Router(config-router)#network 172.16.0.0
Disable RIP Router(config)#no router rip
To enable IRGP with a AS of
200, to all interfaces
Router(config)#router igrp 200
Router(config-router)#network 172.16.0.0
Disable IGRP Router(config)#no router igrp 200
Static route the remote network
is 172.16.1.0, with a mask of
255.255.255.0, the next hop is
172.16.2.1, at a cost of 5 hops
Router(config)#ip route 172.16.1.0 255.255.255.0
172.16.2.1 5
Disable CDP for the whole
router
Router(config)#no cdp run
Enable CDP for he whole router Router(config)#cdp run
Disable CDP on an interface Router(config-if)#no cdp enable


Cisco Router Show Commands
Requirement Cisco Command
View version information show version
View current configuration
(DRAM)
show running-config
View startup configuration
(NVRAM)
show startup-config
Show IOS file and flash space show flash
Shows all logs that the router has
in its memory
show log
View the interface status of
interface e0
show interface e0
Overview all interfaces on the
router
show ip interfaces brief
View type of serial cable on s0 show controllers 0 (note the space between the 's' and the
'0')
Display a summary of connected
cdp devices
show cdp neighbor
Display detailed information on
all devices
show cdp entry *
Display current routing protocols show ip protocols
Display IP routing table show ip route
Display access lists, this includes
the number of displayed matches
show access-lists
Check the router can see the
ISDN switch
show isdn status
Check a Frame Relay PVC
connections
show frame-relay pvc
show lmi traffic stats show frame-relay lmi
Display the frame inverse ARP
table
show frame-relay map
















Cisco Router Basic Operations
Requirement Cisco Command
Enable Enter privileged mode
Return to user mode from
privileged
disable
Exit Router Logout or exit or quit
Recall last command up arrow or <Ctrl-P>
Recall next command down arrow or <Ctrl-N>
Suspend or abort <Shift> and <Ctrl> and 6 then x
Refresh screen output <Ctrl-R>
Compleat Command TAB


Cisco Router Copy Commands
Requirement Cisco Command
Save the current configuration
from DRAM to NVRAM
copy running-config startup-config
Merge NVRAM configuration to
DRAM
copy startup-config running-config
Copy DRAM configuration to a
TFTP server
copy runing-config tftp
Merge TFTP configuration with
current router configuration held
in DRAM
copy tftp runing-config
Backup the IOS onto a TFTP
server
copy flash tftp
Upgrade the router IOS from a
TFTP server
copy tftp flash

Cisco Router Debug Commands
Requirement Cisco Command
Enable debug for RIP debug ip rip
Enable summary IGRP debug
information
debug ip igrp events
Enable detailed IGRP debug
information
debug ip igrp transactions
Debug IPX RIP debug ipx routing activity
Debug IPX SAP debug IPX SAP
Enable debug for CHAP or PAP debug ppp authentication
Switch all debugging off no debug all
undebug all

You might also like