Scribd
Upload
109 views1 page

Eki-2541s DS20130708172051

This document provides specifications for EKI-2541M/MI and EKI-2541S/SI media converters that convert Ethernet networks to fiber optic networks. The media converters support 10/100 Mbps Ethernet and fiber transmission up to 2 km for multi-mode and 30 km for single-mode. They have rugged features such as wide temperature operation from -40 to 75°C and surge protection.

Uploaded by

Omar Molina Becker
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
109 views1 page

Eki-2541s DS20130708172051

This document provides specifications for EKI-2541M/MI and EKI-2541S/SI media converters that convert Ethernet networks to fiber optic networks. The media converters support 10/100 Mbps Ethernet and fiber transmission up to 2 km for multi-mode and 30 km for single-mode. They have rugged features such as wide temperature operation from -40 to 75°C and surge protection.

Uploaded by

Omar Molina Becker
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

EKI-2541M/MI EKI-2541S/SI

10/100T (X) to Multi-Mode SC Type Fiber Optic Industrial Media Converter 10/100T (X) to Single-Mode SC Type Fiber Optic Industrial Media Converter Features
Provides 1 x 10/100 Mbps Ethernet port with RJ45 connector Provides 1 x 100 Mbps Multi-mode/Single-mode SC type ber port Provides internal jumper for Link Fault Pass-through (LFP) setting Supports full/half duplex ow control Supports store and forward transmission Supports Auto-Negotiation Supports MDI/MDI-X auto crossover Supports redundant 12-48 VDC power input Provides exible mounting: DIN-rail and Panel mount Supports wide operating temperatures from -40 to 75C (EKI-2541MI/SI)

EKI-2541M

EKI-2541S
RoHS
2002/95/EC

COMPLIANT

Introduction
EKI-2541M/2541S is designed to convert Ethernet networks to ber networks by transparently converting Ethernet signals to optic signals. The advantages of ber optics are wide bandwidth, EMI immunity and long-distance transmissions.Therefore, EKI-2541M/2541S is an ideal solution for ber to building applications at central ofces or local sites. EKI-2541M/2541S supports MDI/MDIX auto detection, so you dont need to use crossover wires. Furthermore, the EKI-2541M/2541S can work normally from -10 to 60C and accepts a wide voltage range from 12 ~ 48 VDC. Besides, it also provides 3,000 VDC surge (EFT) protection against over-voltage, so it is suitable for harsh operating environments. Link Fault Pass-Through (LFP) EKI-2541M/2541S is an enhanced Ethernet to ber-optic converter. Aside from its standard features, the versatile EKI-2541M/2541S also has the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the internal jumper to enable the LFP function, then EKI-2541M/2541S will force the link to shut down as soon as noticed that the other link has failed, giving the application software a chance to react to the situation.

Specications
Communications
Standard IEEE 802.3, 802.3u, 802.3x LAN 10/100Base-T (X), 100Base-FX Transmission Distance Ethernet: Up to 100 m
Transmission Speed Optical Fiber Multi-mode (EKI-2541M/MI) Single-mode (EKI-2541S/SI)

Protection
Power Reverse Overload current
Present Present

Fiber: Multi-mode: up to 2 km Fiber: Single-mode: up to 30 km Up to 100 Mbps Wavelength: 1310 nm Tx Power: -14/-20 dBm Rx Sensitivity: -31 dBm Parameters: 50/125 um,62.5/125 um Wavelength: 1310 nm Tx Power: -8/-15 dBm Rx Sensitivity: -34 dBm Parameters: 9/125 um

Environment

Operating Temperature Wide Temp. model Storage Temperature Operating Humidity Storage Humidity MTBF -10 ~ 60C (14 ~ 140F) -40 ~ 75C (-40 ~ 167F) -40 ~ 85C (-40 ~ 185F) 5 ~ 95% (non-condensing) 0 ~ 95% (non-condensing) 577,175 hours

Certications
Safety EMI EMS
UL 60950-1, CAN/CSA-C22.2 No.60950 FCC Part 15 Subpart B Class A, EN 55022 Class A EN 61000-4-2 EN 61000-4-3 EN 61000-4-4 EN 61000-4-5 EN 61000-4-6 EN 61000-4-8 IEC 60068-2-27 IEC 60068-2-32 IEC 60068-2-6

Interface
Connectors
LED Indicators 1 x RJ45 1 x SC type ber connector 6-pin removable screw terminal (power) P1, P2, P-Fail Ethernet: 10/100 m, LNK/ACT Fiber: HDX/FDX, LNK/ACT Port/Power Alarm, LFP Fiber: HDX/FDX, Converter/Switch

DIP Switch

Shock Freefall Vibration

Power
Power Consumption Power Input
Max. 2.7 W 12 ~ 48 VDC, redundant dual inputs

Ordering Information

EKI-2541M EKI-2541MI EKI-2541S EKI-2541SI Ethernet to Multi-mode Fiber Converter Ethernet to Multi-mode Fiber Converter w/ Wide Temp. Ethernet to Single-mode Fiber Converter Ethernet to Single-mode Fiber Converter w/ Wide Temp.

Mechanism
Dimensions (W x H x D) 37 x 140 x 95 mm (1.46" x 5.51" x 3.74") Mounting DIN-rail, Wall Enclosure IP30, Metal shell with solid mounting

Industrial Ethernet Solutions

You might also like