Scribd
Upload
5K views10 pages

EDC16 Tuning Guide

This document summarizes the key fuel and boost maps in the EDC16 engine management system, which is used in cars like the Seat Leon and Golf 5. It describes 5 main maps: 1) the drivers wish map, which determines torque based on throttle position and RPM 2) the torque limiter map, which limits torque based on RPM and atmospheric pressure 3) the NM to IQ conversion map, which converts requested torque to injected quantity 4) the boost map, which sets required boost based on torque and RPM 5) the boost limiter map, which limits boost based on atmospheric pressure and RPM. Information like map names, locations, dimensions and scaling factors are provided.

Uploaded by

Aleksandar Milic
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
5K views10 pages

EDC16 Tuning Guide

This document summarizes the key fuel and boost maps in the EDC16 engine management system, which is used in cars like the Seat Leon and Golf 5. It describes 5 main maps: 1) the drivers wish map, which determines torque based on throttle position and RPM 2) the torque limiter map, which limits torque based on RPM and atmospheric pressure 3) the NM to IQ conversion map, which converts requested torque to injected quantity 4) the boost map, which sets required boost based on torque and RPM 5) the boost limiter map, which limits boost based on atmospheric pressure and RPM. Information like map names, locations, dimensions and scaling factors are provided.

Uploaded by

Aleksandar Milic
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

EDC-16

Written by: Midas Date: August 2010 Thanks to: Nuno & Matt &.......... For more info: www.ecuconnections.com Revision: 1.0

Index:

Introduction: The EDC16 system is used in cars like the Seat Leon, golf 5 and other cars that are produced in the same period. The system looks a lot like the EDC15 system, but the EDC16 system is based on Torque (Nm) instead of Injected Quantity. There are a few more differences that are explained in this document. For all examples in this document I used the Seat Leon 105hp file

Fuel related maps 1. Drivers wish Maps: General: This map shows the required torque based on the RPM and the Throttle position. The output of this map is Torque in Nm. There may be more drivers wish maps, in the file I used for this guide there were 8 drivers wish maps.

Picture 1.1: 3D view of the drivers wish map.

Factors & offsets: Map properties Description: Unit: Name: Start address: Column x rows: Values: Factor: Offset: X-Axis Description: Unit: Start address: Values: Factor: Offset: Y-Axis Description: Unit: Start address: Values: Factor: Offset:

Torque Nm Drivers wish 1C2F96 8x16 16Bit(HiLo) 0.1 0

Throttle position % 1C2F86 16Bit(HiLo) 0.01 0

Rpm 1/min 1C2F66 16Bit(HiLo) 1 0

2. Torque limiter: General: This map limits the torque of the engine based on RPM and atmospheric pressure. The output of this map is also Torque in Nm.

Picture 2.1: 3D view of the Torque limiter

Factors & offsets: Map properties Description: Unit: Name: Start address: Column x rows: Values: Factor: Offset: X-Axis Description: Unit: Start address: Values: Factor: Offset: Y-Axis Description: Unit: Start address: Values: Factor: Offset:

Torque Nm Torque limiter 1D43C2 21x3 16Bit(HiLo) 0.1 0

Rpm 1/min 1D4398 16Bit(HiLo) 1 0

Atmospheric pressure Hpa 1D4392 16Bit(HiLo) 1 0

3. Nm to IQ conversion map: General: This map converts the requested Torque in Nm into IQ (injected quantity).

Picture 3.1: 3D view of the NM to IQ conversion map.

Factors & offsets: Map properties Description: Unit: Name: Start address: Column x rows: Values: Factor: Offset: X-Axis Description: Unit: Start address: Values: Factor: Offset: Y-Axis Description: Unit: Start address: Values: Factor: Offset:

IQ mg/stroke Nm to IQ converion map 1D6F9A 16x15 16Bit(HiLo) 0.1 0

Rpm 1/min 1D6F7A 16Bit(HiLo) 1 0

Torque Nm 1D6F5C 16Bit(HiLo) 0.1 0

4. Turbo map: General: This map set the required boost depending on the requested torque and current rpm. There might be more than one boost map. In this file there are 2 boost maps.

Picture 4.1: 3D view of the Boost map.

Factors & offsets: Map properties Description: Unit: Name: Start address: Column x rows: Values: Factor: Offset: X-Axis Description: Unit: Start address: Values: Factor: Offset: Y-Axis Description: Unit: Start address: Values: Factor: Offset:

Boost mBar Boost map 1EAD92 10x16(the other map in this file is 10x15) 16Bit(HiLo) 1 0

Torque Nm 1EAD7E 16Bit(HiLo) 0.1 0

Rpm 1/min 1EAD5E 16Bit(HiLo) 1 0

5. Turbo limiter map: General: This map limits the required boost depending on the atmospheric pressure and the current rpm.

Picture 5.1: 3D view of the Boost limiter map.

Factors & offsets: Map properties Description: Unit: Name: Start address: Column x rows: Values: Factor: Offset: X-Axis Description: Unit: Start address: Values: Factor: Offset: Y-Axis Description: Unit: Start address: Values: Factor: Offset:

Boost mBar Boost limiter map 1EAF00 10x11 16Bit(HiLo) 1 0

Atmospheric pressure Hpa 1EAEEC 16Bit(HiLo) 1 0

Rpm 1/min 1EAED6 16Bit(HiLo) 1 0

1EAD44 - 2050mBar need mode..?????? 1EB04A - Single Boost limiter????????? next map not need mod????

Conclusion:

You might also like