Scribd
Upload
138 views

Procedure Examples MTC RRC

1) The document describes the process of RRC connection establishment between a UE and UTRAN network over a DCH channel which involves RRC signaling messages to setup radio resources and establish the RRC connection. 2) It also details the steps for RRC connection release where radio resources are released and the RRC connection is terminated through RRC and Iu signaling messages. 3) Additionally, it outlines the MTC paging process over PCH to trigger RRC connection establishment for mobile terminated calls and the subsequent signaling for authentication, security mode control, RAB establishment and call setup.

Uploaded by

Shefrin Mohamed
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
138 views

Procedure Examples MTC RRC

1) The document describes the process of RRC connection establishment between a UE and UTRAN network over a DCH channel which involves RRC signaling messages to setup radio resources and establish the RRC connection. 2) It also details the steps for RRC connection release where radio resources are released and the RRC connection is terminated through RRC and Iu signaling messages. 3) Additionally, it outlines the MTC paging process over PCH to trigger RRC connection establishment for mobile terminated calls and the subsequent signaling for authentication, security mode control, RAB establishment and call setup.

Uploaded by

Shefrin Mohamed
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

RRC Connection Establishment (DCH)

RRC RRCIDLE IDLE

1) RRC: RRC Connection Request (RACH)


[Initial UE Id: TMSI + LAI / P-TMSI + RAI / IMSI & Establishment Cause] Decision: DCH / CCH Allocation: RNTI, RR

2) NBAP: Radio Link Setup Request


RX Start [Cell Id, TFCS, frequency, Codes]

3) NBAP: Radio Link Setup Response


ALCAP Iub Data Transport Bearer Setup & Synchronisation

TX Start

4) RRC: RRC Connection Setup (FACH)


[Initial UE Id, RNTI, TFCS, frequency, Codes]

5) RRC: RRC Connection Complete (DCH)

UE

Uu
TFCS: Transport Format Combination Set RNTI: Radio Network Temporary Identity

Node B

RRC RRCConnected Connected (Cell_DCH) (Cell_DCH)

Iub

SRNC

RR: Radio Resources RX, TX: Reception / Transmission

RRC Connection Release (DCH)

RRC RRCConnected Connected (Cell_DCH) (Cell_DCH)

1) RANAP: Iu Release Command


[Cause]

2) Iu Release Complete 3) RRC: RRC Connection Release 4) RRC: RRC Connection Release Complete 5) NBAP: RL Deletion 6) NBAP: RL Deletion Response
ALCAP Iub Bearer Release ALCAP Iu Bearer Release

[Cause]

RRC RRCIDLE IDLE

UE

Uu

Node B

Iub

SRNC

Iu

MSC / VLR

Part 1: Establishment Paging 2) RRC: Paging (PCH)

MTC (CS)

UE UE RRCIdle Idle RRC


1) RANAP: Paging
[CN Domain Indicator, IMSI TMSI, Paging Cause]

[CN Domain Indicator,TMSI, Paging Cause]

3) RRC Connection Establishment:


RRC Idle RRC Connected (Cell_DCH)

NAS Signalling Connection Establishment

4) RRC: Initial DT (DCH)


[CM Service Request]

5) RANAP: Initial UE Message


[CM Service Request]

6) RRC: DL Direct Transfer DT


[Authentication Request]

7) RANAP: Direct Transfer


[Authentication Request]

8) RRC: UL Direct Transfer DT

Security Functions

[Authentication Response]

9) RANAP: DT
[Authentication Response]

11) RRC: Cipher Mode Command 12) RRC: Cipher Mode Complete

10) Security Mode Command


[start Ciphering & Integrity Check]

13) Security Mode Complete

UE

Uu

Node B

Iub

SRNC

Iu

MSC / VLR

Part 2: Establishment

MTC (CS)

15) RRC: DL DT
[Setup]

14) RANAP: DT
[Setup]

RAB Establishment

17) NBAP: Radio Link RL 16) RAB Assignment Request Reconfiguration Prepare 18) RL Reconfiguration Ready
ALCAP Iub Data Transport Bearer Setup

[TFCS]

[Establishment, RAB Parameter]

ALCAP Iu Data Transport Bearer Setup

19) RL Reconfiguration Commit 20) RRC: Radio Bearer Setup 21) RRC: Radio Bearer Setup Complete 23) RRC: UL DT
[Alert] [TFCS]

22) RAB Assignment Response 24) RANAP: DT

25) RRC: UL DT
[Connect]

[Alert]

26) RANAP: DT
[Connect]

Transaction

28) RRC: UL DT
[Connect Ack]

27) RANAP: DT
[Connect Ack]

UE

Uu

Node B

Iub

SRNC

Iu

MSC / VLR

Part 3: Release

MTC (CS)

29) User data transmission


30) RANAP: DT
[Disconnect]

31) RRC: DL DT
[Disconnect]

32) RRC: UL DT
[Release]

33) RANAP: DT
[Release]

Transaction RAB Release

35) RRC: DL DT
[Release Complete]

34) RANAP: DT
[Release Complete]

37) RRC: Radio Bearer Release

36) RAB Assignment Request


[Release]

38) RRC: Radio Bearer Release Complete

39) RAB Assignment Response


ALCAP Iu Bearer Release

RL Release UE:RRC RRCIdle Idle UE:

40) NBAP: RL Deletion


[Release RLs]

41) RL Deletion Response


ALCAP Iub Bearer Release

Uu

Node B

Iub

SRNC

Iu

MSC / VLR

Inter-RNC Soft Handover: RL Addition


User data transmission: UE - Node B (S-RNC) - S-RNC
1) RNSAP: RL Setup Request
[Cell Id, TFCS, frequency, UL SC] Soft HO Decision

2) NBAP: RL Setup Request [Cell Id, TFCS, frequency, UL SC] 3) RL Setup Response
RX Start

4) RNSAP: RL Setup Response

ALCAP Iub Data Transport Bearer Setup & Synchronisation

TX Start

5) RRC: Active Set Update (DCH)


[RL Addition: Cell Id, DL SC]

6) RRC: Active Set Update Complete


[RL Addition: Cell Id, DL SC]

User data transmission: UE - Node Bs (D- & S-RNC) - S-RNC

UE

Uu

Node B
(D-RNC)

Iub

DRNC

Iur

SRNC

You might also like