How To Use SRTM Data Version 2
Uploaded by
Irwan JoeHow To Use SRTM Data Version 2
Uploaded by
Irwan JoeHow to use SRTM Data V2
for Preliminary Design New Railway Plan
A short brief for Mr. Hiroki Sakaue and Mr. Takashi Odan at JTC
by Irwan Joe
SRTM DATA
The Shuttle Radar Topography Mission (SRTM) is an international research effort that
obtained digital elevation models on a near-global scale from 56°S to 60°N, to generate
the most complete high-resolution digital topographic database of Earth to date. SRTM
consisted of a specially modified radar system that flew onboard the Space Shuttle
Endeavour during the 11-day STS-99 mission in February of 2000. To acquire
topographic (elevation) data, the SRTM payload was outfitted with two radar antennas.
One antenna was located in the Shuttle's payload bay, the other on the end of a 60-
meter (200-foot) mast that extended from the payload bay once the Shuttle was in space.
The technique employed is known as Interferometric Synthetic Aperture Radar.
The elevation models are arranged into tiles, each covering one degree of latitude and
one degree of longitude, named according to their south western corners. It follows that
"n45e006" stretches from 45°00′N, 6°00′E to 46°00′N, 7°00′E and "s45w006" from
45°00′S, 6°00′W to 44°00′S, 5°00′W. The resolution of the cells of the source data is one
arc second, but 1" data have only been released over United States territory; for the rest
of the world, only three arc second data are available. Each one arc second tile has
3,601 rows, each consisting of 3,601 16 bit bigendian cells. The dimensions of the three
arc second tiles are 1201 x 1201.
The elevation models derived from the SRTM data are used in Geographic Information
Systems. They can be downloaded freely over the internet, and their file format (.hgt) is
supported by several software developments.
The Shuttle Radar Topography Mission is an international project spearheaded by the
U.S. National Geospatial-Intelligence Agency (NGA) and the U.S. National Aeronautics
and Space Administration (NASA).
NASA has released version 2 of the Shuttle Radar Topography Mission digital
topographic data (also known as the "finished" version). Version 2 is the result of a
substantial editing effort by the National Geospatial Intelligence Agency and exhibits
well-defined water bodies and coastlines and the absence of spikes and wells (single
pixel errors), although some areas of missing data ('voids') are still present. The Version
2 directory also contains the vector coastline mask derived by NGA during the editing,
called the SRTM Water Body Data (SWBD), in ESRI Shapefile format.
The data may be obtained by anonymous ftp to: ftp://e0srp01u.ecs.nasa.gov and moving
to the directory srtm where both version 1 and version 2 directories may be found.
1
Figure 1. The map of Java Island based on SRTM V2 Data
MAKING A RAILWAY DESIGN
For this brief, a new railway design for Notog - Kebasen, Purwokerto - Kroya Line in
Central Java is used for an example.
The minimum requirement software is:
1) Global Mapper ( http://www.globalmapper.com )
2) Autodesk Land Development and Civil Design Module, minimum version 2000
The minimum requirement data are:
1) SRTM Data for project location
2) Topographic Map from US ARMY 1:250000 or Bakosurtanal 1:25000 or 1:50000
paper copy.
Download the SRTM Data
The SRTM Data V2 can be downloaded at ftp://e0srp01u.ecs.nasa.gov or through the
USGS seamless server at http://seamless.usgs.gov/
Figure 2 The Java SRTM's File
Making a Contour Map
Before rectifying the image map, Global Mapper Software must be installed in the
computer.
1) The paper map must be scanned first and convert it to image file (JPG or TIFF)
2
2) Run Global Mapper
3) The Java's Longitude coordinate is from 105º to 115º. It is across UTM's border at
108º. So we have to take only one zone for UTM coordinate. For this sample, we
choose UTM Zone 48.
4) Open the SRTM V2 data for Java Island
5) Open the rectified image map
6) Generate the contour line at specific area (for example every 5 meter)
3
7) Export the contour line to DXF format
8) Open the DXF file in Autodesk Civil
9) Change the color to " By layer" settings and make a surface terrain
10) Make a alignment
11) Generate long section of existing ground and make a design profile
12) Generate cross section of existing ground and attach the cross section template
4
13) Calculate the earth work volume
