Scribd
Upload
139 views

Gpon Olt TC

This document defines several textual conventions for SNMP management of GPON OLT interfaces, including administrative state, operational state, slot number, port number, logical port number, physical port number, virtual port number, profile name, MAC address, VLAN ID, alarm severity, and alarm condition. Data types like integers and octet strings are specified for each textual convention.

Uploaded by

tnarnold
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
139 views

Gpon Olt TC

This document defines several textual conventions for SNMP management of GPON OLT interfaces, including administrative state, operational state, slot number, port number, logical port number, physical port number, virtual port number, profile name, MAC address, VLAN ID, alarm severity, and alarm condition. Data types like integers and octet strings are specified for each textual convention.

Uploaded by

tnarnold
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 3

GPON-OLT-TC DEFINITIONS ::= BEGIN IMPORTS TEXTUAL-CONVENTION,DisplayString FROM SNMPv2-TC enterprises FROM SNMPv2-SMI;

ocsOlt

OBJECT IDENTIFIER ::= { enterprises 6771 10 }

AdminState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates the Adminstrative State of a resource" SYNTAX INTEGER { unlock(1), lock(2) } OperState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates the Operational State of a resource" SYNTAX INTEGER { enabled(1), disabled(2), unknown(3) } SlotNo ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates the Slot ID of the GPON Interface on the OLT System." SYNTAX Unsigned32 (1..12) PortNo ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates the Port ID of the GPON Interface on the OLT System." SYNTAX Unsigned32 (1..4) LogicalPortNo ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates the LogicalPort ID of the GPON Interface on the OLT System." SYNTAX Unsigned32 (1..128) PhysicalPortNo ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates the PhysicalPort ID of the GPON Interface on the OLT System. " SYNTAX Unsigned32 (1..128) VirtualPortNo ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates the VirtualPort ID of the GPON Interface on the OLT System." SYNTAX INTEGER (1..40) ProfileName ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates the Profile Name of the GPON Interface on the OLT System."

SYNTAX DisplayString(SIZE(0..48)) MacAddress ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates the Mac Address of the GPON Interface on the OLT System." SYNTAX OCTET STRING(SIZE(6)) VlanID ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates the Vlan ID of the GPON Interface on the OLT System." SYNTAX Unsigned32 AlarmSeverity ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The textual convention for alarm severity level: alarmLevelClear t alarmLevelCritical e most severe service affecting condition has o ccurred, and the whole system may not be function ing properly. Urgent and immediate corrective action i s required. alarmLevelMajor ce affecting condition has occurred. Immedi ate alarmLevelMinor ce not affecting condition has occurred. Co rrective action should be taken to avoid more ser ious service affecting fault. alarmLevelTca - . alarmLevelInfo - ." SYNTAX INTEGER { alarmLevelClear (0), alarmLevelTca (1), alarmLevelInfo (2), alarmLevelMinor (3), alarmLevelMajor (4), alarmLevelCritical (5), alarmLevelIndeterminate (6) } AlarmCondition ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The textual convention for alarm condition level: alarmConditionClear - . corrective action is required. - The Minor severity level indicates servi - The Major severity level indicates servi the fault has been cleared. - The Critical severity level indicates th - The Cleared severity level indicates tha

alarmConditionAlarm - ." SYNTAX INTEGER { alarmConditionClear (0), alarmConditionAlarm (1), alarmConditionIndeterminate (2) } END

You might also like