Getting Started with Excel 2011

A University of Michigan Library Instructional Technology Workshop

Table of Contents
Elements of An Excel Document ................................................................................. 2 Resizing and Hiding Columns and Rows .................................................................................................. 3 Using Panes to Create Spreadsheet Headers ............................................................................................. 3 Using the AutoFill Command ....................................................................................... 4 Using AutoFill for Sequences ...................................................................................................................... 4 Using AutoFill for Formulas ....................................................................................................................... 4 Using Formulas and Functions ..................................................................................... 5 Using the AutoSum Command ................................................................................................................... 5 Inserting a Function ...................................................................................................................................... 6 Creating Weighted Averages Exercise....................................................................... 7 Using the Named Area in a Formula ......................................................................................................... 8 Substituting Letter Grades Exercise ............................................................................. 9 COUNTIF Exercise ........................................................................................................ 11 TRIM Exercise ............................................................................................................... 11 Formatting .................................................................................................................... 12 Cells, Columns and Rows ..........................................................................................................................12 Setting Up the Page.....................................................................................................................................12 Sorting Data ................................................................................................................. 13 Filtering Data................................................................................................................ 13 Adding A Chart ........................................................................................................... 14 Moving the Chart ........................................................................................................................................14 Modifying a Chart .......................................................................................................................................15 Working with Pivot Tables ........................................................................................... 16 Selecting the Data........................................................................................................................................16 Creating the Report .....................................................................................................................................16

Need help? Visit the Faculty Exploratory or Knowledge Navigation Center on the 2nd floor of the Graduate Library. [email protected] | http://www.lib.umich.edu/guides | [email protected]
rev: 8/3/11 1 of 16

Getting Started with Excel 2011

A University of Michigan Library Instructional Technology Workshop

ELEMENTS OF AN EXCEL DOCUMENT

When you open Excel, a blank workbook is automatically opened. A workbook is a file with one or more sheets; each worksheet (sometimes called spreadsheet) is a page in the workbook where you enter and work with your data. Each workbook starts with one sheet, but you can add more by clicking on the Insert Worksheet icon to the right of your last sheets tab (circled below). To change the name, double-click on the sheets tab and then type the new name. An Excel worksheet is made up of a series of columns (named with letters e.g. A, B, C) and rows (named with numbers e.g. 1, 2, 3) that define the cells for example, A7, as below. To enter data (text or numbers), click in the appropriate cell and start typing. When you type, the data goes into the currently selected cell, called the active cell. All the data you enter in the active cell appears in the Formula bar. If you need to change the data, you can double-click in the cell to activate the cursor in the cell, or click in the Formula bar and make the change there.

Active Cell

To navigate more quickly in your worksheet, use the arrow keys on the keyboard to move left, right, up and down. In addition, you can use the following keystrokes: Return accepts your entry and moves the active cell down one; hold down the Shift key as well and you will move back up. Tab accepts your entry and moves the active cell to the right. Again, hold down the Shift key as well as the Tab key and you will move to the left. The Esc key or red X in the Formula bar will abort your change.

Need help? Visit the Faculty Exploratory or Knowledge Navigation Center on the 2nd floor of the Graduate Library. [email protected] | http://www.lib.umich.edu/guides | [email protected]
rev: 8/3/11 2 of 16

Getting Started with Excel 2011

A University of Michigan Library Instructional Technology Workshop

RESIZING AND HIDING COLUMNS AND ROWS

You can change a columns width by putting your cursor between the letter for that column and the next (between A and B at right). When you get the two-headed arrow, drag to the right or left as desired. Double-clicking on that same spot will autofit the column, making the column as wide as the largest piece of text/data in that column. The same technique works for rows; put your cursor between the two numbers until you see the two-headed arrow, and then drag or double-click. To hide a column or row, put your cursor on any cell in the column or row, go to the Format menu, then Column (or Row) and choose Hide. To unhide a column or row, select the columns or rows before and after the missing column or row, go to the Format menu, then Column (or Row) and choose Unhide. For exact height or width control, go to the Format menu, then Column (or Row) and choose Width (or Height).

USING PANES TO CREATE SPREADSHEET HEADERS

If your data set is large and it is difficult to see which values correspond to what heading, you can make the top rows and leftmost columns into headers that will stay put at the top and left as you scroll around the page. If you are only freezing the top row and leftmost column you can do so in the Window group of the Layout Ribbon. If you want to freeze multiple rows/columns: 1. At the top of the vertical scroll bar, there is a box with two parallel lines ( ). Move your cursor over this box and it changes to two parallel lines with an arrow. 2. Click and drag to divide the window vertically into panes. Adjust the split so that the first row (or two) is the only row in the top pane. 3. To set a horizontal pane, use the similar thick bar at the lower right corner of the scroll bar and drag it to the left. 4. To freeze the panes in place, go to the Window menu and choose Freeze Panes. Note, you dont have to set them both; you can use just the vertical or just the horizontal. Once you freeze the panes, however, you need to unfreeze them to either adjust them or add another pane. To remove the pane(s), go to the Window menu and choose Unfreeze Pane. Once you have the column and row headings in place, you can scroll left to right and top to bottom and they will remain in place. This can be very useful to manipulate your data see the Sorting Data section on page 13 for more information.

Need help? Visit the Faculty Exploratory or Knowledge Navigation Center on the 2nd floor of the Graduate Library. [email protected] | http://www.lib.umich.edu/guides | [email protected]
rev: 8/3/11 3 of 16

Getting Started with Excel 2011

A University of Michigan Library Instructional Technology Workshop

USING THE AUTOFILL COMMAND

Excel has the feature that helps you automatically enter data. If you are entering a predictable series (e.g. 1, 2, 3; days of the week; hours of the day) you can use the AutoFill command to automatically extend the sequence. You can also use this for formulas set up the formula once, then use the AutoFill to propagate it to the other cells.

USING AUTOFILL FOR SEQUENCES

For Excel to know how to fill in the series, you usually need to provide two or three examples. In the case of months, weekdays, and hours, you only need to provide one example. 1. Type in either the first element (e.g. January or any month) or the first two elements (e.g. 1, 2) of a series. 2. Select the cell(s) you just typed in. 3. Move the cursor over the little block in the lower right corner of the active cell, and the cursor changes to a hairline plus sign (+), as opposed to the usual block plus sign. 4. Click and hold on the fill handle and drag to the right (or down) to fill in the series. Note that Excel can only extend series by adding to the sequence (that is, the next month, adding the same number, etc.), not other kinds of math such as square, multiplication, etc.

USING AUTOFILL FOR FORMULAS

To use AutoFill with formulas, insert the formula and make sure it works (more about working with formulas later in this document!). 1. Select the cell(s) with the formula and move the cursor over the little block in the lower right corner of the active cell, and the cursor changes to a hairline plus sign (+), as opposed to the usual block plus sign. 2. Click and hold on the fill handle and drag to the right (or down) to fill in the other cells. Excel automatically adjusts the formula for the row it is now on (so, in the example at right, Januarys total formula would read =SUM(B2:F2) and so on. A Note about using AutoFill with functions: If you want a constant reference (for example, each column should be divided by a certain cells data), add a dollar sign ($) in front that cells reference in the Formula bar. For example, if =D8*$P$8 is in the Formula bar and you AutoFill from this cell, the next cell would read =D9*$P$8, changing the first cell, but keeping the second cell reference constant otherwise, it would read =D9*P9. Another way to accomplish this would be to define the constant and then reference the constant, as seen in the Creating Weighted Averages section on page 7.

Need help? Visit the Faculty Exploratory or Knowledge Navigation Center on the 2nd floor of the Graduate Library. [email protected] | http://www.lib.umich.edu/guides | [email protected]
rev: 8/3/11 4 of 16

Getting Started with Excel 2011

A University of Michigan Library Instructional Technology Workshop

USING FORMULAS AND FUNCTIONS

Formulas in Excel are useful to perform various mathematical, statistical, and logical operations. You can type in a formula (though you have to be sure its exactly right) or you can use Excels preset formulas called functions. Excel can perform simple tasks like a calculator; for example, if you typed in =5*6 then pushed Enter/Return on the keyboard, what would appear in the cell would be 30. If you selected the cell again, though, you would see the formula =5*6. If you type in the formula, you must start with an equal sign, so Excel knows that the data in the cell is a formula. After the =, what comes next depends on what youre trying to do. If you were multiplying numbers (like in the above example), you would just type in the appropriate numbers and mathematical symbol (* for multiply). The power of Excel, however, is to do more complicated calculations, including calculations for the cell itself, no matter what the content (meaning, if the content of the cell changes from a 5 to a 8, for example), and more complex formulas (such as averages, sums, etc., beyond basic math). Just like a basic formula, you need to start with the equal sign. After that, you would put the function name, then the range of cells inside parentheses, separated with a colon. For example: =SUM(B2:B5). Luckily, Excel has many preset functions, so you dont have to remember exactly what to type in just remember the name of the function.

USING THE AUTOSUM COMMAND

Since adding is used so frequently in Excel, there is an icon in the Home Ribbon that will attempt to do it automatically. When you use the AutoSum command, Excel guesses what data you want to sum together (usually a block of cells next to the cell where the formula is). To use the AutoSum, go to the cell where you want the summation result to appear, click on the AutoSum icon in the Standard toolbar ( ) or the Formulas Ribbon ( ), and verify that Excels guess is correct. If it is not correct, select the cells you wish to add to the formula by clicking on the first cell and dragging to the last one. Then press Return on the keyboard. The sum of the data of the selected range of cells will appear in the cell with the formula. If any of the values in this range of cells are changed, the cell with the summation formula will automatically update to reflect the new sum. An example of a sum is displayed in the picture above this section.

Need help? Visit the Faculty Exploratory or Knowledge Navigation Center on the 2nd floor of the Graduate Library. [email protected] | http://www.lib.umich.edu/guides | [email protected]
rev: 8/3/11 5 of 16

Getting Started with Excel 2011

A University of Michigan Library Instructional Technology Workshop

INSERTING A FUNCTION
Before you do anything, you need to make sure your cursor is in the cell in which you want the result. You can insert functions by either going to the Insert menu and choosing Function, by clicking on the arrow next to the AutoSum or Insert icons in the Formulas Ribbon, or by clicking on the Toolbox icon ( ) in the Standard Toolbar. The Formula Builder will appear if you have gone through the Insert menu or the Toolbox, and a list of operations that Excel can perform are displayed. When you choose a function from the list (scroll to it or find it in the Search box and then double click), the bottom portion of the Formula Builder changes so you can select the cells you would like to involve in the formula. To select, use the mouse to click on the first cell and drag through the cells you would like to add. Note that for each function, this bottom portion will look different. If youre not sure how to use a particular function, you can click the More help on this function below the function description and that will bring up Excels Help. Once the function is in the cell, you can copy and then paste it into another cell to do the same function for that different range of cells. You can also use the AutoFill command (click cell with the function, then drag to the right or down). The formula adjusts automatically for the new values. As mentioned before, if you want a constant reference (for example, each column should be divided by a certain cells data), add a dollar sign ($) in front that cells reference in the Formula bar. For example, if =D8*$P$8 is in the Formula bar and you AutoFill from this cell, the next cell would read =D9*$P$8, changing the first cell, but keeping the second cell reference constant otherwise, it would read =D9*P9. Another way to accomplish this would be to define the constant and then reference the constant, as seen below in the Creating Weighted Averages section. There are so many different functions in Excel that it would be difficult to cover them all, but we will include a few below in addition to the AutoSum that was explained above on page 5.

Need help? Visit the Faculty Exploratory or Knowledge Navigation Center on the 2nd floor of the Graduate Library. [email protected] | http://www.lib.umich.edu/guides | [email protected]
rev: 8/3/11 6 of 16

Getting Started with Excel 2011

A University of Michigan Library Instructional Technology Workshop

CREATING WEIGHTED AVERAGES EXERCISE

Suppose the final exam is 50% of the grade, and the homework and midterm are 25% each. To make a weighted average, each score is multiplied by the decimal equivalent of its weight, and the weighted scores are added up. The only restriction on a weighted average is that the weights must sum to 1 (or 100%). You could type this in by hand, for example: =0.25*q3+0.25*r3+0.5*s3 but the problem with that is you would have to get into each cell to make the change if you need to alter the weights for a different semester or class. Excel has a function called sumproduct, which adds the products within a range of cells, so by using that function, we can avoid having to type by hand, as in the example above. In addition, because functions can refer to cell contents and thereby change as the cell content changes we use the cell references for our weights, and so if they change, our formula results will automatically changes. For example, if the weights change (so the final exam is now worth 40%, and the midterm and homework are now 30% each), as long as the cells themselves are referenced (rather than the specific numeric value), the formula will automatically update. If we add the weights above each column heading, insert the sumproduct function, choose the students scores (Array1) and then the weights (Array2), the formula will be correct for the first student. If we try to use the AutoFill command, however, as we discussed in the Using AutoFill for Formulas on page 4, both cell references will be moved down so the second students formula would be incorrect (as shown at lower right). We can either use the $ (dollar sign) to lock in the cell references for the weights, or we can define a named area referencing the cells with the weight information, and then use that name in the formula to reference those cells. Before we define a name, create a new column for the weighted averages for all of the students. This way we can compare the weighted averages with the non-weighted averages.
Need help? Visit the Faculty Exploratory or Knowledge Navigation Center on the 2nd floor of the Graduate Library. [email protected] | http://www.lib.umich.edu/guides | [email protected]
rev: 8/3/11 7 of 16

Quick Reference: 1. Enter weights 2. Select cells and name weights 3. Insert the sumproduct function a. Array 1 = first students scores b. Array 2 = Weights 4. Click OK and AutoFill

Getting Started with Excel 2011

A University of Michigan Library Instructional Technology Workshop

DEFINING A NAMED AREA

1. Enter a set of weights for each score at the top or bottom of each grade column (e.g. .25, .25, .50). Make sure the weighting adds up to 1. 2. Select the cells containing the weights. 3. In the Insert menu, Name, and then Define. 4. In the Define Name dialog box, type a name in the Name: field note, Excel may guess at a name if an adjacent cell seems to be the label. 5. If youve already selected the cells (as we suggested in step 2), the Refers To: field will already have the correct cell information. 6. Click OK to accept the name for these cells in our example here, Weights.

USING THE NAMED AREA IN A FORMULA

In the Weighted Score column you created, click in the empty cell for the first students score. To insert the sumproduct function, 1. Go to the Formulas Builder and type in sumproduct in the Search box. 2. Select the cells with the first students scores for Array1. 3. Type in the name Weights (or whatever you called it) in Array2. This field is not case-sensitive youll know you have it correct with the contents of the cells displays next to the field, and the result will display in the lower right of the dialog box. 4. Press Return to exit the dialog box. 5. Use the fill handle to extend the formula to all students.

Need help? Visit the Faculty Exploratory or Knowledge Navigation Center on the 2nd floor of the Graduate Library. [email protected] | http://www.lib.umich.edu/guides | [email protected]
rev: 8/3/11 8 of 16

Getting Started with Excel 2011

A University of Michigan Library Instructional Technology Workshop

SUBSTITUTING LETTER GRADES EXERCISE

Rather than entering letter grades by hand, Excel can Quick Reference: do it for you. This also allows you to try different 1. Create columns for scale and grades grading curves with a minimum of effort. We will create 2. Select the scale and letters and name a table that has the numeric value of the student scores them and the corresponding letter grade, and then use the 3. Insert the vlookup function a. Look_up value = first students vlookup function (vertical lookup) to compare each score students score to the table and return the proper letter b. Table_array = Scale grade. c. Col_index_num = 2 1. Create a column for the students called Grade 4. Click OK and AutoFill formula (or whatever you want). 2. Off to the side, add two other column headings for Scale and Letter Grade. This area is what we will compare to the students score. a. Under Scale, enter a straight scale by typing 0, 60, 70, 80, 90, down the column. For automatic grade assignment, you must start with the low score and increase as you go down. b. Under Letter Grade, enter E, D, C, B, A. Your scale can be as detailed as youd like (meaning, you can use A, A-, B+, B, etc.), but you need to set that up before you name the area (steps 3-6 below). If you change your mind later, you will need to redefine the area. To use the same scale for all of the students, we will name that area, and then use the name in the formula (as we did with the weighted averages). Otherwise, if we copy the formula down (or use AutoFill), the references to the cells that contain the scores and grades would change, and the result would be incorrect. 3. Select the cells containing the scale and the letter grades, but not the headings themselves (as shown in the picture above). 4. In the Insert menu, Name, and then Define. 5. In the Define Name dialog box, type a name in the Name: field for example, scale. 6. If youve already selected the cells, the Refers To: field will already have the correct cell information. Click OK to accept the name.

Need help? Visit the Faculty Exploratory or Knowledge Navigation Center on the 2nd floor of the Graduate Library. [email protected] | http://www.lib.umich.edu/guides | [email protected]
rev: 8/3/11 9 of 16

Getting Started with Excel 2011

A University of Michigan Library Instructional Technology Workshop

Now were ready to use that newly named area to assign grades. The vlookup function looks up a value in the first column of a table (where the values in the first column are increasing) and returns the value in any other column of the table. In our case, then, we will compare the students weighted score to the first column of the table (our scale) and return the value in the second column (the letter grade). Because we have defined this area with a name, if we change the scale to grade on a curve (so, to get a B you only need 75 instead of 80, for example), the letter grades will automatically adjust. 7. Put your cursor in the Grade column for the first student then go to the Formula Builder and type vlookup in the Search box. Double-click on it when you see it. 8. In the bottom portion of the Formula Builder, a. Click in the Lookup_value field, and then click on the first students weighted score. b. In the Table_array field, type in what you called the scale and letter grades area remember, youll know youre correct if the scale and letter grades appear to the right of the field. c. In the Col_index_num field, put in the column number that has the result you would like to appear in our case, its column 2 that has the letter grades we want to appear next to each students weighted score. The correct letter grade should appear to the right and below the fields in the dialog box. d. Note the range_lookup argument is not highlighted. That means its optional. e. Press Return, and the grade that corresponds with the students score should appear. 9. Use the fill handle to fill the formula in to the rest of the students. Note that we dont have to worry about the reference to our scale because we used a name. You can change the curve to something else (e.g. 55, 65, 75, 85) and see how that influences the grades.

Need help? Visit the Faculty Exploratory or Knowledge Navigation Center on the 2nd floor of the Graduate Library. [email protected] | http://www.lib.umich.edu/guides | [email protected]
rev: 8/3/11 10 of 16

Getting Started with Excel 2011

A University of Michigan Library Instructional Technology Workshop

COUNTIF EXERCISE
COUNTIF is a useful function that will only count the data if the data meets certain criteria. As with any function, place your cursor in the cell where you would like the result to display. 1. Go to the Formula Builder and type in countif in the Search box. 2. Once you see COUNTIF as an option in the Formula Builder, double-click it to activate the lower portion of the Formula Builder. 3. Click in the Range field and then select the data you wish to count in our example, the Location sheet. Notice that items in the column will display to the right of the Range field. 4. Click in the Criteria field and then click on the cell that contains the data you wish to count in our example, cell A2. Again, the contents of that cell should display to the right of the Criteria field, and the result should display below. 5. Press Return on the keyboard to accept the formula. Since weve referenced cells in both fields of the dialog box, you can use the AutoFill feature as weve discussed before.

TRIM EXERCISE
Sometimes your data has extra spaces at the beginning of the cell, so it wont sort or filter properly. You can use the TRIM function to get rid of them. 1. Create a new column heading (for example, Fixed), and leave your cursor in the first blank cell. 2. Go to the Formula Builder, and type trim in the Search box. Double-click on TRIM to activate the lower portion of the Formula Builder. 3. In the Text field, click on the cell that you would like to change, then press Return on the keyboard to accept. 4. Use the AutoFill feature to fill in this formula for the rest of the column. 5. Select and copy the cells in the Fixed column, then in the first cell in the original column, right-click and choose Paste Special from the shortcut menu. 6. Make sure the Values radio button is selected, and press OK. Delete the fixed column.
Need help? Visit the Faculty Exploratory or Knowledge Navigation Center on the 2nd floor of the Graduate Library. [email protected] | http://www.lib.umich.edu/guides | [email protected]
rev: 8/3/11 11 of 16

Getting Started with Excel 2011

A University of Michigan Library Instructional Technology Workshop

FORMATTING
CELLS, COLUMNS AND ROWS
You can format the font, number, alignment, border, pattern, and protection of your cells, rows, and columns by going to the Format menu and selecting Cells or by using the Home Ribbon.

Font Group: change the font, size and color text and cells. Alignment Group: set the alignment and orientation of the text. You can also choose to wrap text in a cell or merge cells. Number Group: specify the format of the cell (such as currency, time, etc.)

SETTING UP THE PAGE

Go to the File menu and choose Page Setup or the Layout Ribbon to change the margins, page orientation, show/print gridlines, and to adjust the print size.

Need help? Visit the Faculty Exploratory or Knowledge Navigation Center on the 2nd floor of the Graduate Library. [email protected] | http://www.lib.umich.edu/guides | [email protected]
rev: 8/3/11 12 of 16

Getting Started with Excel 2011

A University of Michigan Library Instructional Technology Workshop

SORTING DATA
For a quick sort, click the Sort icon in the Data Ribbon or the Standard Toolbar (see below). For a more complex sort, choose Custom Sort or go to the Data menu and choose Sort.

Within the Sort dialog box you can check the box labeled My list has headers (in the top right), if your columns have a header row (meaning, the label for whats in the column is in the top row). You can sort by as many factors as you want, use the plus and minus symbols ( of options shown. ) in the bottom left to control the number

Click OK when you are done.

FILTERING DATA
In addition to sorting, you may find that adding a filter allows you to better analyze your data. When data is filtered, only rows that meet the filter criteria will display, and other rows will be hidden. With data filtered, you can then copy, format, print, etc., your data, without having to sort or move it first. To use a filter, go to the Data menu, and then Filter. You can also choose the Filter icon in the Data Ribbon( ).

The column headings now all have a down arrow next to the heading name. Click on the arrow next to the heading you want to filter, and you will see a list of all the unique values in that column choose the one you want. You can also choose to Sort your items using this dialog box, as well. Now a small Filter icon will appear next to the down arrow of the filtered column, click on the arrow next to another heading to further filter the data. Youll also notice that the rows that dont meet the criteria are hidden, as indicated by the blue numbers for the rows. To clear the filter, choose (Select All) from the Filter dialog box, or go to the Data menu, then Clear Filters.
Need help? Visit the Faculty Exploratory or Knowledge Navigation Center on the 2nd floor of the Graduate Library. [email protected] | http://www.lib.umich.edu/guides | [email protected]
rev: 8/3/11 13 of 16

Getting Started with Excel 2011

A University of Michigan Library Instructional Technology Workshop

ADVANCED FILTER
To employ an advanced filter, go to the Data menu, Filter, and then Advanced; the Advanced Filter dialog box will display. This dialog box allows you to set particular criteria, copy results to another location (the other location must be in the same sheet), and capture unique values. In the example at right, unique values for the Sponsor column should now be filtered in-place, rather than copied to a new location.

ADDING A CHART
To add a chart, select the data you wish to appear in the chart. If the data is noncontiguous, select one set, then hold down the Command/Apple key on the keyboard to select the second set. Click on the Charts Ribbon and select the type of chart you want. By default, the chart will just appear on the spreadsheet, and then you can move or modify it, as described below. Note that two new purple tabs appear in the Ribbon, to the right of the Charts tab when a chart is selected: Chart Layout and Format.

MOVING THE CHART

You can move the chart around on the spreadsheet by clicking on it and then dragging it with a mouse. To move it to its own worksheet (so you can see it more clearly, print it easily, etc.), use the menu that appears only when the chart is selected the Chart menu and select Move Chart.

Need help? Visit the Faculty Exploratory or Knowledge Navigation Center on the 2nd floor of the Graduate Library. [email protected] | http://www.lib.umich.edu/guides | [email protected]
rev: 8/3/11 14 of 16

Getting Started with Excel 2011

A University of Michigan Library Instructional Technology Workshop

MODIFYING A CHART
Whether the chart is an object on the worksheet with the data or on its own sheet, there are many ways to modify the way it looks and its location. A few ways are described below, but explore to find more! In all cases, you have to select the chart first.

Add a title, move the legend and so on in the Labels group of the Chart Layout Ribbon. Edit the data by just changing it directly in the datasheet.

Change the style of the chart in the Chart Element Styles group of the Format Ribbon. Change the color, etc. of the data series, by selecting it and changing it in the Chart Element Styles group of the Format Ribbon or by double-clicking on it to open the Format Data Series dialog box (shown below).

Need help? Visit the Faculty Exploratory or Knowledge Navigation Center on the 2nd floor of the Graduate Library. [email protected] | http://www.lib.umich.edu/guides | [email protected]
rev: 8/3/11 15 of 16

Getting Started with Excel 2011

A University of Michigan Library Instructional Technology Workshop

WORKING WITH PIVOT TABLES

A pivot table is a way to summarize and view large amounts of raw data in an easy to read format. The pivot table doesnt change your raw data, but rather creates a new view of it. While there are many more things you can do with pivot tables than the below, lets look at an example.

SELECTING THE DATA

1. Put your cursor anywhere in your data set (you dont have to select it all), then go to the Data menu and choose Pivot Tableor click the PivotTable icon ( ) in the Data Ribbon. If you click the arrow next to the PivotTable icon you can choose to have Excel Automatically create a PivotTable or to Manually create one. If you choose Automatically, a new worksheet with your PivotTable will open. 2. If you choose Manually or go through the Data menu a dialog box will appear. Within this dialog box, if you choose Use a table or a range in this workbook, Excel will guess at which data should be included; if its wrong, select the correct data in the Location: field of the dialog box. 3. Next, choose where you want the pivot table to appear - its most common to put the pivot table in a new worksheet, but you could change the radio button to Existing worksheet if you want. Click Ok.

CREATING THE REPORT

When you click Ok, you will be brought to a new sheet, and the PivotTable Ribbon and the PivotTable Builder dialog box will appear. 1. To create the pivot table, select one of the items in the Field name area of the PivotTable Builder dialog box. 2. Depending on what you are trying to do, select other fields by checking the box next to the item name. 3. Right-click in the Pivot Table and choose Field Settings to change the value (for example, from count to sum) . If you change your data on the source spreadsheet, be sure to right-click on the Pivot Table and choose Refresh Data.

Need help? Visit the Faculty Exploratory or Knowledge Navigation Center on the 2nd floor of the Graduate Library. [email protected] | http://www.lib.umich.edu/guides | [email protected]
rev: 8/3/11 16 of 16