Scribd
Upload
137 views

Landslide Classification: Cruden and Varnes, 1996

The document classifies and describes different types of landslides in rock and soil. It identifies the key types as rock slides, falls and topples, soil slides, and flows. Rock slides are further divided into translational, rotational, and compound types based on the rupture surface and deformation. Soil slides include rotational and compound types. Flows involve rapid movement of debris, sand, or mud.

Uploaded by

Ikah Ning
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
137 views

Landslide Classification: Cruden and Varnes, 1996

The document classifies and describes different types of landslides in rock and soil. It identifies the key types as rock slides, falls and topples, soil slides, and flows. Rock slides are further divided into translational, rotational, and compound types based on the rupture surface and deformation. Soil slides include rotational and compound types. Flows involve rapid movement of debris, sand, or mud.

Uploaded by

Ikah Ning
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 12

Landslide Classification

Cruden and Varnes, 1996

Varnes Classification
Landslide classification (Varnes, 1978) BEDROCK FALLS TOPPLES SLIDES SPREADS FLOWS ROCK FALL BLOCK TOPPLE FLEXURAL TOPPLE ROCK SLUMP ROCK SLIDE ROCK SPREAD ROCK CREEP SLOPE SAGGING Code: RAPID, SLOW (IN MOST CASES) DEBRIS EARTH (<80% sand and finer) (>80% sand and finer) DEBRIS FALL EARTH FALL DEBRIS SLIDE DEBRIS FLOW DEBRIS AVALANCHE SOIL CREEP SOLIFLUCTION BLOCK TOPPLE EARTH SLUMP EARTH SLIDE EARTH SPREAD WET SAND AND SILT FLOW RAPID EARTH FLOW LOESS FLOW DRY SAND FLOW EARTH FLOW

COMPLEX

ROCK AVALANCHE EARTH SLUMP-EARTHFLOW

Ref.: Varnes, D.J., 1978. Slope movement types and processes. In Landslides, Analysis and Control. Special Report 176, Transportation Research Board, Washington, pp. 11-33.

Velocity scale
Landslide velocity scale (Cruden and Varnes, 1996). Velocity Description Velocity class (mm/sec) 7 Extremely Rapid -----------------------5x103 6 Very Rapid -----------------------5x101 5 Rapid -----------------------5x10-1 4 Moderate -----------------------5x10-3 3 Slow -----------------------5x10-5 2 Very Slow -----------------------5x10-7 1 Extremely Slow Typical velocity 5 m/sec Nil 3 m/min Evacuation 1.8 m/hr Evacuation 13 m/month Maintenance 1.6 m/year Maintenance 16 mm/year Nil Human response Nil

Ref.: Cruden, D.M. and Varnes, D.J., 1996. Landslide types and processes. In Landslides, Investigation and Mitigation. Special Report 247, Transportation Research Board, Washington, pp. 36-75.

Landslide terminology
Landslide = any mass of earth material (soil or rock) displaced by gravity

rupture surface
Cruden and Varnes, 1996

Sliding mechanisms

1) Translation
back-tilt

2) Rotation

3) Compound sliding
Internal deformation required

Graben

Recommended Landslide Classification


ROCK SLIDES

Translational (or Wedge) Rock Slide Rotational Rock Slide(Slump) Compound Rock Slide Rock Collapse Rock (Debris) Fall Rock Block Topple Rock Flexural Topple Clay Slump (Rotational) Clay Slide (Compound) Sand (Gravel, Talus, Debris) Slide Dry Sand (Silt, Gravel, Talus, Debris) Flow Sand (Silt, Debris, Peat) Flow Slide Sensitive Clay Flow Slide Debris Avalanche Debris (Mud) Flow Debris Flood Earth Flow Rock Avalanche Rock Slide-Debris Avalanche

FALLS AND TOPPLES

SOIL SLIDES

FLOWS

(modified from Varnes, 1978, Hutchinson, 1988, Hungr et al., 2001)

Slides in rock

Translational rock slide, Wedge slide


Sliding of a mass of rock on a planar rupture surface, or a wedge of two planes with downslope-oriented intersection. Rupture surface may be stepped. No internal deformation. The slide head may be separating from stable rock along a deep, vertical tension crack. Usually extremely rapid.

Rock slump (rotational slide)


Sliding of a mass of weak rock on a cylindrical or ellipsoidal rupture surface which is not structurally-controlled. Little internal deformation. A large main scarp and characteristic back-tilted bench at the head. Usually slow.

Scatter River, North-east British Columbia (Hungr et al., 1984

Compound rock slide Sliding of a mass of rock on a rupture surface consisting of several planes, or a surface of uneven curvature, so that motion is kinematically possible only if accompanied by significant internal distortion of the moving mass. Horst-and-graben features at the head and many secondary shear surfaces. Parts of the rupture surface may develop by shearing through the rock structure. Slow or extremely rapid.

Vaiont (1963)

Isometry of rupture surface (after Hendron and Patton, 1985)

non-circular

view

section random joints Rock collapse Sliding of a rock mass on an irregular rupture surface consisting of a number of randomly-oriented joints, separated by segments of intact rock (rock bridges). Occurs in strong rocks with nonsystematic structure. Failure mechanism is very complex and often difficult to describe. Some toppling may also occur. Very sudden and extremely rapid.

Mt. Cayley, British Columbia, dacite breccias

Mt. Cayley, British Columbia, dacite breccias

Slides in soil

Salmon Arm, B.C., 1996

Rotational Soil* Slide (Soil* Slump): Sliding of a mass of (usually cohesive) soil on a cylindrical or ellipsoidal rupture surface. Little internal deformation. Normally slow, but may be extremely rapid in sensitive or collapsive soils.
* The word Soil may be replaced in the definition by a specific term such as Clay, Silt, Sand, Debris or Earth

GRABEN

Compound Soil* Slide Sliding of a mass of soil on a rupture surface consisting of several planes, or a surface of uneven curvature, so that motion is kinematically possible only if accompanied by significant internal distortion of the moving mass. Horst-and-graben features at the head and many secondary shear surfaces. The basal segment of the rupture surface often follows a weak horizon in the soil stratigraphy.

Compound slide in Cretaceous clays from Bromhead, 2006 (southern England)

Compound sliding surface, cross-section

Translational slide (Debris slide)


Sliding of a thin surficial layer over strong substrate

B.C.

Venezuela, 1999

Definitions of sliding type mass movements in rock


Rotational Rock Slide (Rock Slump): Sliding of a mass of weak rock on a cylindrical or ellipsoidal rupture surface which is not structurally-controlled. Little internal deformation. A large main scarp and characteristic back-tilted bench at the head. Usually slow. Translational Rock Slide (Block Slide, Wedge Slide): Sliding of a mass of rock on a planar rupture surface, or a wedge of two planes with downslope-oriented intersection. No internal deformation. The slide head may be separating from stable rock along a deep, vertical tension crack. Usually extremely rapid. Compound Rock Slide: Sliding of a mass of rock on a rupture surface consisting of several planes, or a surface of uneven curvature, so that motion is kinematically possible only if accompanied by significant internal distortion of the moving mass. Horst-and-graben features at the head and many secondary shear surfaces. Parts of the rupture surface may develop by shearing through the rock structure. Slow or extremely rapid. Rock Collapse: Sliding of a rock mass on an irregular rupture surface consisting of a number of randomly-oriented joints, separated by segments of intact rock (rock bridges). Occurs in strong rocks with non-systematic structure. Failure mechanism is very complex and often difficult to describe. Very sudden and extremely rapid.

Debris slide Sliding of a mass of granular material on a shalow, planar surface parallel with the ground. Usually, the sliding mass is a veneer of colluvium or weathered soil resting on a stronger substrate. Many debris slides become flow-like after moving a short distance and transform into debris avalanches.

You might also like