Scribd
Upload
394 views

Golay Code

This document describes the encoding and decoding procedures for the (24, 12) extended binary Golay code. It shows how Maple can be used to implement these procedures. The code has generator and parity check matrices defined based on an 11x11 cyclic matrix B. Encoding simply multiplies the information vector by the generator matrix. Decoding works by computing syndromes and using the properties of B to determine the error pattern and correct the received vector. Examples are provided to demonstrate encoding, decoding of 1-2 errors, and error detection of >3 errors.

Uploaded by

Hardeep Solanki
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
394 views

Golay Code

This document describes the encoding and decoding procedures for the (24, 12) extended binary Golay code. It shows how Maple can be used to implement these procedures. The code has generator and parity check matrices defined based on an 11x11 cyclic matrix B. Encoding simply multiplies the information vector by the generator matrix. Decoding works by computing syndromes and using the properties of B to determine the error pattern and correct the received vector. Examples are provided to demonstrate encoding, decoding of 1-2 errors, and error detection of >3 errors.

Uploaded by

Hardeep Solanki
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 9

Extended (24, 12) Binary Golay Code: Encoding and Decoding Procedures

Abstract
It has been shown in the worksheet how to implement encoding and decoding of triple error correcting (24, 12) binary Golay code. The worksheet proves that Maple is an excellent (but underestimated) tool for teaching error-correcting codes.

1. Introduction
The extended (24, 12) binary Golay code [1] considered in this submission can correct three or fewer errors. Due to the 11 x 11 matrix Bc, having a cyclic structure and being a component of both the generator and the parity check matrices of this code, its decoding procedure is very simple. Therefore, the discussed (24, 12) code was used about 25 years ago in the spacecraft Voyager. As it is known, this spacecraft delivered to the Earth many perfect photographs of Jupiter and Saturn.

2. Generator and Parity Check Matrices of (24, 12) Golay Code


Let

be the 11 x 11 matrix over GF(2), where

The (24, 12) Golay code has the following generator and parity check matrices, correspondingly:

, where I - identity matrix 12 x 12,

and

. Therefore

It can be seen that

3. Encoding and Decoding of (24, 12) Golay Code


As in the case of any linear code, to generate a code vector it suffices to multiply the vector i, containing 12 information symbols

i=[ by the G matrix:

wherefrom

The decoding algorithm of the extended Golay code, shown below, consists in determining the error pattern u= v + w, where w denotes the vector received and v the nearest to w code vector. In the content of the algorithm wt(x) denotes the weight of the vector x, (i.e. the number of "ones" contained in x), i-th

row of the matrix B, the word of length 12 with 1 in the i-th position and 0 elsewhere. After determining u we assume that the corrected received vector will be v = w + u. Here are the steps of the algorithm [1]:

Step 1. Compute the syndrome Step 2. If Step 3. If Step 4. Compute the second syndrome Step 5. If then u = [000000000000, ]. ]. u = [s, 000000000000]. then u = [ ].

Step 6. If then u = [ Step 7. If u is not yet determined then request retransmission.

4. Maple Approach to the Extended Golay Code


The Maple implementation of encoding and decoding procedures of the discussed code, i.e. C24E andC24D together with matrices B, G, H and are contained in the file golay.m. The next section presents how to make use of this file.

5. Example
The worksheet allow the user to experiment with (24, 12) Golay code. To do it one ought to read the filegolay.m: > read "golay.m";

We can now see the matrices B, G, H and C24E and C24D:

and the Maple code of procedures

> B := evalm(B); G := evalm(G); H := evalm(H); Ht := evalm(Ht); > showstat(C24E); > showstat(C24D);

Let the information symbols be:

> i := [1,0,1,0,1,0,0,1,1,0,0,0]:

then the code vector containing these information bits is the following:

> v := C24E(i);

Assuming the error vector

> u := [0,0,1,0,0,0,0,0,0,0,0,1,0,1,0,0,0,0,0,0,0,0,0,0];

we can compute the received vector in the considered case.

> w := [seq(0, i = 1 .. 24)]: for i to 24 do w[i] := (v[i] + u[i]) mod 2 end do: w;

Here is the result of decoding of the received vector:

> vc := C24D(w);

The result is quite correct. If error pattern contains five (or any odd number) errors

> u := [1,0,1,0,0,0,0,0,0,0,0,1,0,1,0,0,0,0,0,0,1,0,0,0]: w := [seq(0, i = 1 .. 24)]: for i to 24 do w[i] := (v[i] + u[i]) mod 2 end do: w;

then the received vector is transformed into the code vector and errors are not detected:

> vc := C24D(w);

In the case if error vector contains six (or any even number) errors

> u := [1,0,1,0,0,0,0,0,0,0,0,1,0,1,0,0,0,0,0,0,1,0,0,1]: w := [seq(0, i = 1 .. 24)]: for i to 24 do w[i] := (v[i] + u[i]) mod 2 end do: w;

then decoding procedure can be able to detect errors:

> vc := C24D(w);

You might also like