Scribd
Upload
129 views

Programmable Logic Devices (PLD)

The purpose of a PLD device is to permit elaborate digital logic designs to be implemented by the user in a single device. Can be erased electrically and reprogrammed with a new design, making them very well suited for academic and prototyping

Uploaded by

Rooni Asy'ari
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
129 views

Programmable Logic Devices (PLD)

The purpose of a PLD device is to permit elaborate digital logic designs to be implemented by the user in a single device. Can be erased electrically and reprogrammed with a new design, making them very well suited for academic and prototyping

Uploaded by

Rooni Asy'ari
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

PLD

PROGRAMMABLE LOGIC DEVICES (PLD)


The purpose of a PLD device is to permit elaborate digital logic designs to be implemented by the user in a single device. Can be erased electrically and reprogrammed with a new design, making them very well suited for academic and prototyping Types of Programmable Logic Devices
SPLDs (Simple Programmable Logic Devices)
ROM (Read-Only Memory) PLA (Programmable Logic Array) PAL (Programmable Array Logic) GAL (Generic Array Logic)

CPLD (Complex Programmable Logic Device) FPGA (Field-Programmable Gate Array)

PLD
The first three varieties are quite similar to each other:
They all have an input connection matrix, which connects the inputs of the device to an array of ANDgates. They all have an output connection matrix, which connect the outputs of the AND-gates to the inputs of OR-gates which drive the outputs of the device.

PLD
The differences between the first three categories are these:
1. In a ROM, the input connection matrix is hardwired. The user can modify the output connection matrix. In a PAL/GAL the output connection matrix is hardwired. The user can modify the input connection matrix. In a PLA the user can modify both the input connection matrix and the output connection matrix.

The gate array is significantly different and will be described later.

General structure of PLDs.

Buffer/inverter

(a) Symbol. (b) Logic equivalent.

Programming by blowing fuses.

OR - PLD Notation

(a) Before programming.

(b) After programming.

AND - PLD Notation

PLD notation (langkah-langkah pemograman)


( a) ( b) (c) ( d) (e) Unprogrammed and-gate. Unprogrammed or-gate. Programmed and-gate realizing the term ac. Programmed or-gate realizing the term a + b. Special notation for an and-gate having all its input fuses intact. (f) Special notation for an or-gate having all its input fuses intact. (g) And-gate with non-fusible inputs. (h) Or-gate with non-fusible inputs.

PROM Notation

A 2n m PROM

Using a PROM for logic design

(a) (b)

Logic diagram. Representation in PLD notation.

(a) Truth table.

(b) PROM realization.

A simple four-input, three-output PAL device.

An example of using a PAL device to realize two Boolean functions. (a) Karnaugh maps. (b) Realization.

Logic diagram of an n p m PLA

Example of combinational logic design using a PLA.

(a) Maps showing the multiple-output prime implicants. (b) Partial covering of the f1 and f2 maps. (c) Maps for the multiple-output minimal sum. (d) Realization using a 3 4 2 PLA.

Exclusive-or-gate with a programmable fuse

General structure of a PLA having true and complemented output capability

(a) Circuit diagram.

(b) Symbolic representation.

Karnaugh maps for the functions f1(x,y,z) = m(1,2,3,7) and f2(x,y,z) = m(0,1,2,6)

Two realizations of f1(x,y,z) = m(1,2,3,7) and f2(x,y,z) = m(0,1,2,6). (a) Realization based on f1 and f 2 (b) Realization based on f1 and f 2

FPGA AND CPLD


1. FPGA - Field-Programmable Gate Array. 2. CPLD - Complex Programmable Logic Device 3. FPGA and CPLD is an advance PLD. 4. Support thousands of gate where as PLD only support hundreds of gates.

Introduction to FPGA & CPLD

What is an FPGA?
Before the advent of programmable logic, custom logic circuits were built at the board level using standard components, or at the gate level in expensive application-specific (custom) integrated circuits. FPGA is an integrated circuit that contains many (64 to over 10,000) identical logic cells that can be viewed as standard components. Each logic cell can independently take on any one of a limited set of personalities. Individual cells are interconnected by a matrix of wires and programmable switches. A user's design is implemented by specifying the simple logic function for each cell and selectively closing the switches in the interconnect matrix. Array of logic cells and interconnect form a fabric of basic building blocks for logic circuits. Complex designs are created by combining these basic blocks to create the desired circuit

FPGA architecture

What does a logic cell do?


The logic cell architecture varies between different device families. Each logic cell combines a few binary inputs (typically between 3 and 10) to one or two outputs according to a Boolean logic function specified in the user program . In most families, the user also has the option of registering the combinatorial output of the cell, so that clocked logic can be easily implemented. Cell's combinatorial logic may be physically implemented as a small look-up table memory (LUT) or as a set of multiplexers and gates. LUT devices tend to be a bit more flexible and provide more inputs per cell than multiplexer cells at the expense of propagation delay.

what does

'Field Programmable' mean?

Field Programmable means that the FPGA's function is defined by a user's program rather than by the manufacturer of the device. A typical integrated circuit performs a particular function defined at the time of manufacture. In contrast, the FPGA's function is defined by a program written by someone other than the device manufacturer. Depending on the particular device, the program is either 'burned' in permanently or semi-permanently as part of a board assembly process, or is loaded from an external memory each time the device is powered up. This user programmability gives the user access to complex integrated designs without the high engineering costs associated with application specific integrated circuits.

How are FPGA programs created?


Individually defining the many switch connections and cell logic functions would be a daunting task. This task is handled by special software. The software translates a user's schematic diagrams or textual hardware description language code then places and routes the translated design. Most of the software packages have hooks to allow the user to influence implementation, placement and routing to obtain better performance and utilization of the device. Libraries of more complex function macros (eg. adders) further simplify the design process by providing common circuits that are already optimized for speed or area.

FPGA
FPGA applications:i. DSP ii. Software-defined radio iii. Aerospace iv. Defense system v. ASIC Prototyping vi. Medical Imaging vii. Computer vision viii. Speech Recognition ix. Cryptography x. Bioinformatic xi. And others.

CPLD
1. Complexity of CPLD is between FPGA and PLD. 2. CPLD featured in common PLD:i. Non-volatile configuration memory does not need an external configuration PROM. ii. Routing constraints. Not for large and deeply layered logic.

CPLD
3. CPLD featured in common FPGA:i. Large number of gates available. ii. Can include complicated feedback path.

4. CPLD application:i. Address coding ii. High performance control logic iii. Complex finite state machines

CPLD
5. CPLD architecture:-

LAB Logic Array Block / uses PALs PIA Programmable Interconnect Array

You might also like