4 0 0 S e r i es

400 Seri es

PRESSURE, VACUUM, DIFFERENTIAL PRESSURE AND TEMpERATURE SWITCHES

FEATUREs
1, 2 & 3 switch outputs Epoxy-coated enclosure designed to meet enclosure type 4X Wide variety of pressure sensors and materials Setting via reference dial or hex screw adjustment FM approved Adjustable Ranges:
"WC ranges: 300 "wc vacuum to 250 wc pressure (-746,7 to 622,3 mbar) Pressure: 30 Hg Vac to 6000 psi (-1,0 to 413,7 bar) Differential pressure: 1"wcd to 200 psid (2.5 mbar to 13,8 bar) Temperature: -180 to 650 F (-117.8 to 343.3 C)

4 0 0 - B - 0 7

400 S e r i e s

400 Seri es

overview
The 400 Series is a versatile family of vacuum, pressure, differential pressure and temperature switches for applications that require single or multiple switching capabilities. Dual and triple switch versions provide multi-output for alarm and shutdown, pre-alarm and alarm, high/low limit or level staging functions. A wide variety of microswitch and process connection options, along with a weather-tight enclosure, make the 400 Series an ideal choice for most ordinary location applications. Its worldwide use is assured with approvals and certifications to agency standards. Widely used throughout the process industries, the 400 Series provides threshold protection and control for many critical functions. Typical installations are found in industrial gas production, energy generation including pumps, turbines and compressors, pulp and paper, and water and wastewater treatment.

features
UL listed and cUL certified.
FM approved.

CE compliant to low voltage

directive and pressure equipment directive.

Optional ATEX or GOST intrinsic

safety compliance.

One, two or three switch outputs

may be separated up to 100% of range.

Wide variety of available options

and pressure sensor modules.

Most models available for

immediate delivery.

Reference scale, for types B, E & H with option M321

Enlarged View

Differential Pressure Model with M210 Option - Dial Indication

Temperature Model with Remote Bulb & Capillary and M321 option Gasketed Lexan Window

Dual Switch, Low Water Column Differential Pressure Model

Lexan is a registered trademark of Sabic Innovative Plastics 2

W W W

U E O N L I N E

C O M

4 0 0 - B - 0 7

400 Series

specifications
STORAGE TEMPERATURE AMBIENT TEMPERATURE LIMITs SET POINT REPEATABILITY -65 to 160F (-54 to 71C) -40 to 160F (-40 to 71C); set point typically shifts less than 1% of range for a 50F (28C) ambient temperature change Temperature models: 2% of full scale range Pressure: models 126-376, 520-535, 540-547, 570-572, S126B-S164B: 2% of full scale range; models 440-457, 550-559: 1% of full scale range; models 610-614: 3% of full scale range Set point repeats after 15 G, 10 millisecond duration Set point repeats after 2.5 G, 5-500 Hz Die cast aluminum, epoxy powder coated, gasketed, captive cover screws Designed to meet enclosure type 4X requirements One, two or three SPDT switches, may be separated up to 100% of range except models 521-524, 531-534: 50%; models 520, 525, 530, 535, 570-572: 30%; switches may be wired normally open or normally closed 15 A 125/250/480 VAC resistive. Electrical switches have limited DC capabilities. Consult factory for additional information. Approx. 3 to 7.5 lbs.; varies with model One 3/4 NPT and two 7/8 diameter knockouts All models 1/4 NPT (female) except models S126B-S164B, 520-535: 1/2 NPT (female); models 540-547: 1/8" NPT (female) E types use the same assemblies as F types, however, range spans are limited due to use of reference dials Bulb and capillary: 6 feet 304 stainless steel Immersion stem: models 120 &121: nickel-plated brass; optional 316L stainless steel available Temperature Models: Model 1BS: solvent lled; models 2-8: non-toxic oil lled Type F typically 1% and type E, B & C typically 2% of range under laboratory conditions (70F ambient circulating bath at rate of 1/2F per minute change) Differential pressure indication available J400K, J402K models 147-S157B; accuracy approximately 1-12% mid 50% of range, 3% at ends; window is plexiglass and gasketed; indicator may be eld adjusted for approximately 1% accuracy at any set point within range

SHOCK VIBRATION ENCLOsURE ENCLOsURE CLAssIFICATION SWITCH OUTPUT

ELECTRICAL RATING WEIGHT ELECTRICAL CONNECTION PREssURE CONNECTION TEMPERATURE AssEMBLY

FILL TEMPERATURE DEADBAND DIFFERENTIAL PREssURE INDICATOR (OPTION M210)

4 0 0 - B - 0 7

W W W

U E O N L I N E

C O M

400 S e r i e s

400 Seri es

approvals
UNITED STATES AND CANADA Type 400 & 402 UL Listed, cUL Certied Pressure: UL 508; CSA C22.2 No. 14, le # E42272 Temperature: UL 873; CSA C22.2 No. 24, le # E10667 Type 403 UL Recognized, cUL Recognized Pressure: UL 508; CSA C22.2 No. 14, le # E42272 Temperature: UL 873; CSA C22.2 No. 24, le # E10667 All Types FM Approved Pressure: Class 3510 Temperature: Class 3545 EUROPE ATEX Directive (94/9/EC) II 1 G EEx ia IIC T6 (OPTIONAL code M405) Tamb = -50C to +60C UL International DEMKO A/S (N.B.# 0539) Certicate # DEMKO 03 ATEX 0335063 EN 50014, 50020 & 50284 Low Voltage Directive (LVD) (73/23/EC & 93/68/EEC) Compliant to LVD Products rated lower than 50 VAC and 75 VDC are outside of the scope of the LVD Pressure Equipment Directive (PED) (97/23/EC) Compliant to PED Products rated below 7.5 PSI are outside the scope of PED RUSSIA Gosgortechnadzor Permit (OPTIONAL code M406) 0ExiaIICT6 Tamb = -50C to +60C NANIO CCVE Certication Center Certicate # ROSS US.GB05.Bo2933 GOST R 51330.0, 51330.1, 51330.10 & 51330.14

W W W

U E O N L I N E

C O M

4 0 0 - B - 0 7

400 Series

pressure model chart

Type J400, single switch output with internal hex screw adjustment Type J402, dual switch output with internal hex screw adjustment Type J403, triple switch output with internal hex screw adjustment Model Adjustable Set Point Range
Low end of range on fall; High end of range on rise
wc mbar

Deadband
Deadband doubles for 2 and 3 switch types
wc mbar

Over Range Pressure*

Proof Pressure**

psi

bar

psi

bar

Buna-N diaphragm and O-Ring with epoxy coated aluminum 1/2 NPT (female) pressure connection, large 0.72 orice for clean-out purposes. Other wetted materials available, see pg. 12 520 521 522 523 524 525 530 531 532 533 534 535 300 Vac to 0 10 Vac to 10 50 Vac to 50 0.5 to 5.0 2.5 to 50 10 to 250 300 Vac to 0 10 Vac to 10 50 Vac to 50 0.5 to 5.0 2.5 to 50 10 to 250 psi
(unless noted)

-746,7 to 0 -24,9 to 24,9 -124,5 to 124,5 1,2 to 12,4 6,2 to 124,5 24,9 to 622,3 -746,7 to 0 -24,9 to 24,9 -124,5 to 124,5 1,2 to 12,4 6,2 to 124,5 24,9 to 622,3 bar
(unless noted)

0.2 to 12 0.1 to 1 0.1 to 5 0.1 to 0.3 0.1 to 2 0.1 to 10 0.2 to 15 0.1 to 1 0.1 to 6 0.1 to 0.3 0.1 to 2.5 0.1 to 10 psi
(unless noted)

0,5 to 29,9 0,2 to 2,5 0,2 to 12,4 0,2 to 0,7 0,2 to 5,0 0,2 to 24,9 0,5 to 37,3 0,2 to 2,5 0,2 to 14,9 0,2 to 0,7 0,2 to 6,2 0,2 to 24,9 bar
(unless noted)

200 200 200 200 200 200 50 50 50 50 50 50 psi

(unless noted)

13,8 13,8 13,8 13,8 13,8 13,8 3,4 3,4 3,4 3,4 3,4 3,4 bar
(unless noted)

400 400 400 400 400 400 100 100 100 100 100 100 psi

27,6 27,6 27,6 27,6 27,6 27,6 6,9 6,9 6,9 6,9 6,9 6,9 bar

Welded 316L stainless steel diaphragm and 1/2 NPT (female) pressure connection, large 0.72 orice for clean-out purposes

316L stainless steel diaphragm and Viton O-Ring with 316L stainless steel 1/4" NPT (female) pressure connection 5701 5711 5721 S126B S134B S137B S144B S146B S156B S164B 358 361 376 0 to 20 0 to 50 0 to 100 30 Hg Vac to 0 30 Hg Vac to 20 psi 0 to 80 wc 0 to 20 0 to 30 0 to 100 0 to 200 0 to 200 0 to 300 0 to 500 0 to 1,4 0 to 3,4 0 to 6,9 -1 to 0 -1 to 1,4 0 to 199,1 mbar 0 to 1,4 0 to 2,1 0 to 6,9 0 to 13,8 0 to 13,8 0 to 20,7 0 to 34,5 0.2 to 4 0.7 to 6 1 to 7 0.2 to 0.9 Hg 0.2 to 1.2 Hg 2 to 6 wc 0.1 to 0.5 0.1 to 0.6 0.2 to 0.8 0.3 to 2 1.5 to 8 2 to 9 3 to 12 13,8 to 275,8 mbar 48,3 to 413,7 mbar 0,1 to 0,5 6,8 to 30,5 mbar 6,8 to 40,6 mbar 5 to 14,9 mbar 6,9 to 34,5 mbar 6,9 to 41,4 mbar 13,8 to 55,2 mbar 20,7 to 137,9 mbar 0,1 to 0,6 0,1 to 0,6 0,2 to 0,8 20 50 100 3 20 80 wc 20 30 100 200 200 300 500 0,2 1,4 199,1 mbar 1,4 2,1 6,9 13,8 13,8 20,7 34,5 5 25 5 25 40 125 200 250 350 575 0,3 1,7 0,3 1,7 2,8 8,6 13,8 17,2 24,1 39,6 1,4 3,4 6,9 225 225 225 15,5 15,5 15,5

Welded 316L stainless steel bellows and 1/2 NPT (female) pressure connection

Welded 316L stainless steel bellows and 1/4 NPT (female) pressure connection

*Over Range Pressure: The maximum pressure that may be applied continuously without causing damage and maintaining set point repeatability **Proof pressure: The maximum pressure to which a pressure sensor may be subjected, which causes no permanent damage. The unit may require calibration (e.g. start-up, testing). Model not available on types J400 and J403; actual deadband shown, do not double switch separation a maximum of 30 - 50% of range. 1 Switch separation of 30% maximum for dual and triple switch units.

4 0 0 - B - 0 7

W W W

U E O N L I N E

C O M

400 S e r i e s

400 Seri es

pressure model chart

Type J400, single switch output with internal hex screw adjustment Type J402, dual switch output with internal hex screw adjustment Type J403, triple switch output with internal hex screw adjustment

Model Adjustable Set Point Range Low end of range on fall;

High end of range on rise
psi
(unless noted)

Deadband
Deadband doubles for 2 and 3 switch types
psi bar

Over Range Pressure*

Proof Pressure**

bar
(unless noted)

psi
(unless noted)

bar

psi

bar

303 stainless steel piston with Buna-N O-Ring and 303 stainless steel 1/4 NPT (female) pressure connection (not recommended for gas service since drying of the O-Ring seal can allow bleeding of medium into the atmosphere) 610 612 614 100 to 1,000 200 to 3,000 500 to 6,000 6,9 to 68,9 13,8 to 206,8 34,5 to 413,7 30 to 150 40 to 250 50 to 400 2,1 to 10,3 2,8 to 17,2 3,4 to 27,6 6,000 6,000 6,000 413,7 413,7 413,7 10,000 10,000 10,000 689,5 689,5 689,5

Brass bellows with nickel-plated brass 1/4 NPT (female) pressure connection; Models 126 and 134 have zinc-plated steel spring exposed to media 126 134 137 144 146 156 164 270 274 30 Hg Vac to 0 30 Hg Vac to 20 psi 0 to 80 wc 0 to 20 0 to 30 0 to 100 0 to 200 0 to 200 0 to 300 -1 to 0 -1 to 1,4 0 to 199,1 mbar 0 to 1,4 0 to 2,1 0 to 6,9 0 to 13,8 0 to 13,8 0 to 20,7 0.2 to 0.9 Hg 0.2 to 1.2 Hg 2 to 6 wc 0.1 to 0.5 0.1 to 0.6 0.2 to 0.8 0.3 to 2 1.5 to 8 2 to 10 6,8 to 30,5 mbar 6,8 to 40,6 mbar 5 to 14,9 mbar 6,9 to 34,5 mbar 6,9 to 41,4 mbar 13,8 to 55,2 mbar 20,7 to 137,9 mbar 0,1 to 0,6 0,1 to 0,7 3 20 3 20 30 100 200 200 300 0,2 1,4 0.2 1,4 2 6,9 13,8 13,8 20,7 5 25 5 25 40 125 200 250 350 0,3 1,7 0,3 1,7 2,8 8,6 13,8 17,2 24,1

Phosphor bronze bellows with nickel-plated brass 1/4 NPT (female) pressure connection

Buna-N diaphragm and O-Ring with aluminum 1/4 NPT (female) pressure connection and cap 440 441 442 443 448 449 450 451 452 453 454 550 551 552 553 554 555 0 to 2 wc 0 to 10 wc 0 to 20 wc 0 to 80 wc 80 wc Vac to 0 0 to 20 wc 30 Hg Vac to 0 0 to 80 wc 30 Hg Vac to 20 psi 0 to 20 0 to 30 30 Hg Vac to 0 0 to 80 wc 30 Hg Vac to 20 psi 0 to 20 0 to 30 0 to 100 0 to 5 mbar 0 to 24,9 mbar 0 to 49,8 mbar 0 to 199,1 mbar -199,1 to 0 mbar 0 to 49,8 mbar -1 to 0 0 to 199,1 mbar -1 to 1,4 0 to 1,4 0 to 2,1 -1 to 0 0 to 199,1 mbar -1 to 1,4 0 to 1,4 0 to 2,1 0 to 6,9 0.07 to 0.25 wc 0.15 to 0.3 wc 0.2 to 0.5 wc 0.5 to 1.8 wc 1 to 3 wc 1 to 2 wc 0.1 to 0.4 Hg 1 to 3 wc 0.2 to 1 Hg 0.05 to 0.2 0.05 to 0.3 0.1 to 0.6 Hg 1.5 to 3.5 wc 0.2 to 1 Hg 0.05 to 0.3 0.1 to 0.4 0.25 to 0.75 0,2 to 0,6 mbar 0,4 to 0,7 mbar 0,5 to 1,2 mbar 1,2 to 4,5 mbar 2,5 to 7,5 mbar 2,5 to 5,0 mbar 3,4 to 13,5 mbar 2,5 to 7,5 mbar 6,8 to 33,9 mbar 3,4 to 13,8 mbar 3,4 to 20,7 mbar 3,4 to 20,3 mbar 3,7 to 8,7 mbar 6,8 to 33,9 mbar 3,4 to 20,7 mbar 6,9 to 27,6 mbar 17,2 to 51,7 mbar 3 3 3 3 3 3 3 3 20 20 30 3 3 20 20 30 100 0,2 0,2 0,2 0,2 0,2 0,2 0,2 0,2 1,4 1,4 2,1 0,2 0,2 1,4 1,4 2,1 6,9 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 225 15,5 15,5 15,5 15,5 15,5 15,5 15,5 15,5 15,5 15,5 15,5 15,5 15,5 15,5 15,5 15,5 15,5

Teon diaphragm and Viton O-Ring with 316L stainless steel 1/4 NPT (female) pressure connection and cap

Teflon and Viton are registered trademarks of E.I. DuPont de Nemours and Company 6 W W W . U E O N L I N E . C O M

Model not available on types J402 and J403

Model not available on type J403 4 0 0 - B - 0 7

400 Series

pressure model chart

Type H400, single switch output with internal adjustment via reference dial Type H402, dual switch output with internal adjustment via reference dial Type H403, triple switch output with internal adjustment via reference dial Model Adjustable Set Point Range
High end of range on rise Low end of range on fall;
psi
(unless noted)

Deadband
Deadband doubles for 2 and 3 switch types
psi
(unless noted)

Proof Pressure** Scale Division

psi bar psi
(unless noted)

bar
(unless noted)

bar
(unless noted)

Welded 316L stainless steel bellows and 1/2 NPT (female) pressure connection S126B S134B S137B S144B S146B S156B S164B 30 Hg Vac to 0 30 Hg Vac to 20 psi 0 to 80 wc 0 to 20 0 to 30 0 to 100 0 to 200 -1 to 0 -1 to 1,4 0 to 199,1 mbar 0 to 1,4 0 to 2,1 0 to 6,9 0 to 13,8 0.2 to 0.9 Hg 0.2 to 1.2 Hg 2 to 6 wc 0.1 to 0.5 0.1 to 0.6 0.2 to 0.8 0.3 to 2 6,8 to 30,5 mbar 6,8 to 40,6 mbar 5 to 14,9 mbar 6,9 to 34,5 mbar 6,9 to 41,4 mbar 13,8 to 55,2 mbar 20,7 to 137,9 mbar 5 25 5 25 40 125 200 0,3 1,7 0,3 1,7 2,8 8,6 13,8 2 Hg 2 Hg & 2 psi 5 wc 1 1 5 10

Welded 316L stainless steel bellows and 1/4 NPT (female) pressure connection 358 361 376 0 to 200 0 to 300 0 to 500 0 to 13,8 0 to 20,7 0 to 34,5 1.5 to 8 2 to 9 3 to 12 0,1 to 0,6 0,1 to 0,6 0,2 to 0,8 250 350 575 17,2 24,1 39,6 10 10 20

Brass bellows with nickel-plated brass 1/4 NPT (female) pressure connection; Models 126 and 134 have zinc-plated steel spring exposed to media 126 134 137 144 146 156 164 30 Hg Vac to 0 30 Hg Vac to 20 psi 0 to 80 wc 0 to 20 0 to 30 0 to 100 0 to 200 -1 to 0 -1 to 1,4 0 to 199,1 mbar 0 to 1,4 0 to 2,1 0 to 6,9 0 to 13,8 0.2 to 0.9 Hg 0.2 to 1.2 Hg 2 to 6 wc 0.1 to 0.5 0.1 to 0.6 0.2 to 0.8 0.3 to 2 6,8 to 30,5 mbar 6,8 to 40,6 mbar 5 to 14,9 mbar 6,9 to 34,5 mbar 6,9 to 41,4 mbar 13,8 to 55,2 mbar 20,7 to 137,9 mbar 5 25 5 25 40 125 200 0,3 1,7 0,3 1,7 2,8 8,6 13,8 2 Hg 2 Hg & 2 psi 5 wc 1 1 5 10

Phosphor bronze bellows with nickel plated brass 1/4 NPT (female) pressure connection 270 274 0 to 200 0 to 300 0 to 13,8 0 to 20,7 1.5 to 8 2 to 10 0,1 to 0,6 0,1 to 0,7 250 350 17,2 24,1 10 10

Buna-N diaphragm and O-Ring with aluminum 1/4 NPT (female) pressure connection and cap 440 441 442 443 448 450 452 453 454 0 to 2 wc 0 to 10 wc 0 to 20 wc 0 to 80 wc 80 wc Vac to 0 30 Hg Vac to 0 30 Hg Vac to 20 psi 0 to 20 0 to 30 0 to 5 mbar 0 to 24,9 mbar 0 to 49,8 mbar 0 to 199,1 mbar -199,1 to 0 mbar -1 to 0 -1 to 1,4 0 to 1,4 0 to 2,1 0.07 to 0.25 wc 0.15 to 0.3 wc 0.2 to 0.5 wc 0.5 to 1.8 wc 1 to 3 wc 0.1 to .04 Hg 0.1 to 1 Hg 0.05 to 0.2 0.05 to 0.3 0,2 to 0,6 mbar 0,4 to 0,7 mbar 0,5 to 1,2 mbar 1,2 to 4,5 mbar 2,5 to 7,5 mbar 3,4 to 13,5 mbar 3,4 to 33,9 mbar 3,4 to 13,8 mbar 3,4 to 20,7 mbar 225 225 225 225 225 225 225 225 225 15.5 15,5 15,5 15,5 15,5 15,5 15,5 15,5 15,5 0.1 wc 0.5 wc 1 wc 5 wc 5 wc 2 Hg 2 Hg & 2 psi 1 1

**Proof pressure: The maximum pressure to which a pressure sensor may be subjected, which causes no permanent damage. The unit may require calibration (e.g. start-up, testing). Model not available on types H402 and H403 Model not available on type H403

4 0 0 - B - 0 7

W W W

U E O N L I N E

C O M

400 S e r i e s

400 Seri es

pressure model chart

Type H400, single switch output with internal adjustment via reference dial Type H402, dual switch output with internal adjustment via reference dial Type H403, triple switch output with internal adjustment via reference dial

Model

Adjustable Set Point Range

Low end of range on fall; High end of range on rise
psi
(unless noted)

Deadband

Proof Pressure** Scale Division

psi bar

Deadband doubles for 2 and 3 switch types

psi
(unless noted)

bar
(unless noted)

bar
(unless noted)

psi
(unless noted)

Teon diaphragm and Viton O-Ring with 316L stainless steel 1/4 NPT (female) pressure connection and cap 550 552 553 554 555 30 Hg Vac to 0 30 Hg Vac to 20 psi 0 to 20 0 to 30 0 to 100 -1 to 0 -1 to 1,4 0 to 1,4 0 to 2,1 0 to 6,9 0.1 to 0.6 Hg 0.2 to 1 Hg 0.05 to 0.3 0.1 to 0.4 0.25 to 0.75 3,4 to 20,3 mbar 6,8 to 33,9 mbar 3,4 to 20,7 mbar 6,9 to 27,6 mbar 17,2 to 51,7 mbar 225 225 225 225 225 15,5 15,5 15,5 15,5 15,5 2 Hg 2 Hg & 2 psi 1 1 5

**Proof pressure: The maximum pressure to which a pressure sensor may be subjected, which causes no permanent damage. The unit may require calibration (e.g. start-up, testing). Model not available on types H402 and H403 Model not available on type H403

differential pressure model chart

Type J400K, single switch output with internal hex screw adjustment Type J402K, dual switch output with internal hex screw adjustment Model Adjustable Set Point Range
Low end of range on fall: High end of range on rise
psid
(unless noted)

Deadband

Working Pressure***

Proof Pressure**

Deadband doubles for 2 and 3 switch types

psi mbar psi bar
(unless noted)

bar
(unless noted)

psi

bar

Welded 316L stainless steel bellows and 1/2 NPT (female) pressure connections S147B S157B 3 to 30 10 to 100 0,2 to 2,1 0,7 to 6,9 0.5 to 2 0.5 to 3 34,5 to 137,9 34,5 to 206,8 30 Hg Vac to 100 30 Hg Vac to 180 -1 to 6,9 -1 to 12,4 300 300 20,7 20,7

Brass bellows with nickel-plated brass 1/4 NPT (female) pressure connections 147 157 3 to 30 10 to 100 0,2 to 2,1 0,7 to 6,9 0.5 to 2 0.5 to 3 34,5 to 137,9 34,5 to 206,8 30 Hg Vac to 100 -1 to 6,9 30 Hg Vac to 150 -1 to 10,3 180 180 12,4 12,4

Buna-N diaphragm and O-Ring with aluminum 1/4 NPT (female) pressure connections 455 456 457 5 to 80 wcd 2 to 20 3 to 30 12,4 to 199,1 mbar 0,1 to 1,4 0,2 to 2,1 1 to 4 wc 0.1 to 0.3 0.1 to 0.4 2,5 to 10 6,9 to 20,7 6,9 to 27,6 30 Hg Vac to 225 -1 to 15,5 30 Hg Vac to 225 -1 to 15,5 30 Hg Vac to 225 -1 to 15,5 225 225 225 15,5 15,5 15,5

***Working Pressure Range: The pressure range within which two opposing sensors can be safely operated and still maintain set point adjustability.

W W W

U E O N L I N E

C O M

4 0 0 - B - 0 7

400 Series

differential pressure model chart

Type J400K, single switch output with internal hex screw adjustment Type J402K, dual switch output with internal hex screw adjustment

Model Adjustable Set Point Range

Low end of range on fall; High end of range on rise
psid
(unless noted)

Deadband
Deadband doubles for 2 and 3 switch types
psi
(unless noted)

Working Pressure***

psi bar

Proof Pressure**

bar
(unless noted)

bar
(unless noted)

psi

bar

Buna-N diaphragms and o-ring with epoxy coated aluminum 1/8 NPT (female) pressure connections (J402K only) 540 541 542 543 544 545 546 547 1 to 7 wcd 2 to 20 wcd 5 to 50 wcd 15 to 100 wcd 2 to 20 5 to 50 10 to 100 20 to 200 2.5 to 17,4 mbar 5 to 49,8 mbar 12,4 to 124,5 mbar 37,3 to 248,9 mbar 0,1 to 1,4 0,3 to 3,4 0,7 to 6,9 1,4 to 13,8 0.1 to 0.5wc 0.5 to 2 wc 0.5 to 5 wc 0.5 to 7 wc 1 to 2.5 1 to 3 1 to 5 1 to 7 0,2 to 1,2 mbar 1,2 to 5 mbar 1,2 to 12,4 mbar 1,2 to 17,4 mbar 0,1 to 0,2 0,1 to 0,2 0,1 to 0,3 0,1 to 0,5 30 Hg Vac to 200 30 Hg Vac to 200 30 Hg Vac to 200 30 Hg Vac to 200 30 Hg Vac to 1200 30 Hg Vac to 1200 30 Hg Vac to 1200 30 Hg Vac to 1200 -1 to 13,8 -1 to 13,8 -1 to 13,8 -1 to 13,8 -1 to 82,7 -1 to 82,7 -1 to 82,7 -1 to 82,7 400 400 400 400 2500 2500 2500 2500 27,6 27,6 27,6 27,6 172,4 172,4 172,4 172,4

Teon and Buna-N diaphragms, Buna-N O-Ring with aluminum 1/4 NPT (female) pressure connections 559 10 to 100 0,7 to 6,9 0.2 to 1 13,8 to 68,9 mbar 30 Hg Vac to 225 -1 to 15,5 225 15,5

Type H400K, single switch output with internal adjustment via reference dial Type H402K, dual switch output with internal adjustment via reference dial
Buna-N diaphragm and O-Ring with 1/4 NPT (female) aluminum pressure connections 455 456 457 559 5 to 80 wcd 2 to 20 3 to 30 10 to 100 12,4 to 199,1 mbar 0,1 to 1,4 0,2 to 2,1 0,7 to 6,9 1 to 4 wc 0.1 to 0.3 0.1 to 0.4 0.2 to 1 2,5 to 10 mbar 6,9 to 20,7 mbar 6,9 to 27,6 mbar 13,8 to 68,9 mbar 30 Hg Vac to 225 30 Hg Vac to 225 30 Hg Vac to 225 30 Hg Vac to 225 -1 to 15,5 -1 to 15,5 -1 to 15,5 -1 to 15,5 225 225 225 225 15,5 15,5 15,5 15,5

Teon and Buna-N diaphragms, Buna-N O-Ring with 1/4 NPT (female) aluminum pressure connections

***Working Pressure Range: The pressure range within which two opposing sensors can be safely operated and still maintain set point adjustability. Model not available on type J400K; actual deadband shown, do not double

4 0 0 - B - 0 7

W W W

U E O N L I N E

C O M

400 S e r i e s

400 Seri es

temperature model chart

Type B400, single switch output, immersion stem, internal adjustment via reference dial Type B402, dual switch output, immersion stem, internal adjustment via reference dial Type B403, triple switch output, immersion stem, internal adjustment via reference dial Type C400, single switch output, immersion stem, internal hex screw adjustment Type C402, dual switch output, immersion stem, internal hex screw adjustment Type C403, triple switch output, immersion stem, internal hex screw adjustment Type E400, single switch output, bulb & capillary***, internal adjustment via reference dial Type E402, dual switch output, bulb & capillary***, internal adjustment via reference dial Type E403, triple switch output, bulb & capillary***, internal adjustment via reference dial Type F400, single switch output, bulb & capillary***, internal hex screw adjustment Type F402, dual switch output, bulb & capillary***, internal hex screw adjustment Type F403, triple switch output, bulb & capillary***, internal hex screw adjustment Adjustable Set Point Range Max. Temp. Scale Division
F C F C F C

Model

Stem or Bulb Size*/Finish**

OD x Length

Type B400, B402, B403, single, dual, or triple switch output, immersion stem, internal adjustment via reference dial. Type C400, C402, C403, single, dual, or triple switch output, immersion stem, internal hex screw adjustment 120 121 0 to 225 200 to 425 -17.8 to 107.2 93.3 to 218.3 275 475 135 246.1 5 5 5 5 9/16" x 1-7 8" nickel-plated brass 9/16" x 1-7 8" nickel-plated brass

Type E400, E402, E403, single, dual, or triple switch output, bulb & capillary***, internal adjustment via reference dial 2BSA 2BSB 3BS 4BS 5BS 8BS -120 to 100 30 to 250 100 to 400 25 to 100 -20 to 80 350 to 640 -84.4 to 37.8 -1.1 to 121.1 37.8 to 204.4 -3.9 to 37.8 -28.9 to 26.7 176.7 to 337.8 150 300 450 150 130 690 65.6 148.9 232.2 65.6 54.4 365.6 10 10 10 5 5 10 5 5 10 2 2 10 3/8 x 2-5/8 3/8 x 2-5/8 3/8 x 2-1 8 3/8 x 6-3 4 3/8 x 5 3/8 x 3-1 4 3/8 x 3-34 3/8 x 2-5/8 3/8 x 2-18 3/8 x 6-34 3/8 x 5 3/8 x 4-12 3/8 x 3 3/8 x 3-14

Type F400, F402, F403, single, dual, or triple switch output, bulb & capillary***, internal hex screw adjustment 1BS 2BS 3BS 4BS 5BS 6BS 7BS 8BS -180 to 120 -125 to 350 -125 to 500 -40 to 120 -40 to 180 0 to 250 0 to 400 50 to 650 -117.8 to 48.9 -87.2 to 176.7 -87.2 to 260 -40 to 48.9 -40 to 82.2 -17.8 to 121.1 -17.8 to 204.4 10 to 343.3 170 400 550 170 230 300 450 700 76.7 204.4 287.8 76.7 110 148.9 232.2 371.1 N/A N/A N/A N/A N/A N/A N/A N/A

Model not available on type F403 Only applies to types B400, B402, B403, E400, E402 and E403 * Optional immersion stem lengths and capillary lengths are available ** Optional stainless steel immersion stem and capillary covering available *** Standard capillary lengths are 6ft

10

W W W

U E O N L I N E

C O M

4 0 0 - B - 0 7

400 Series

how to order
BUILdING A pART NUMbER
Select a Type Refer to the Type section below. Determine type number based on switch output, enclosure, adjustment and reference. Fill in the type portion of your part number with the corresponding number. Select a Model Refer to the Model Charts. Determine model based on adjustable range, deadband and proof pressure. Fill in the model portion of your part number with the corresponding number. Select an Option Refer to the Options section. Determine option number based on switch output, optional materials or other product enhancements. Fill in the option portion of your part number with the corresponding number. Leave option portion blank if no options are needed. FOR MUlTiple OpTiONs: Call United Electric Controls.

TYPE PRESSURE

DESCRIPTION Type J400 - One SPDT output; internal hex screw adjustment Type J402 - Two SPDT outputs; internal hex screw adjustment Type J403 - Three SPDT outputs; internal hex screw adjustment Type H400 - One SPDT output; internal adjustment with reference dial Type H402 - Two SPDT outputs; internal adjustment with reference dial Type H403 - Three SPDT outputs; internal adjustment with reference dial

DIFFERENTIAL PRESSURE Type J400K - One SPDT output; internal hex screw adjustment Type J402K - Two SPDT outputs; internal hex screw adjustment Type H400K - One SPDT output; internal adjustment with reference dial Type H402K - Two SPDT outputs; internal adjustment with reference dial TEMpERATURE Type B400 - Immersion stem; one SPDT output; internal adjustment with reference dial Type B402 - Immersion stem; two SPDT outputs; internal adjustment with reference dial Type B403 - Immersion stem; three SPDT outputs; internal adjustment with reference dial Type C400 - Immersion stem; one SPDT output; internal hex screw adjustment Type C402 - Immersion stem; two SPDT outputs; internal hex screw adjustment Type C403 - Immersion stem; three SPDT outputs; internal hex screw adjustment Type E400 - Bulb and capillary; one SPDT output; internal adjustment with reference dial Type E402 - Bulb and capillary; two SPDT outputs; internal adjustment with reference dial Type E403 - Bulb and capillary; three SPDT outputs; internal adjustment with reference dial Type F400 - Bulb and capillary; one SPDT output; internal hex screw adjustment Type F402 - Bulb and capillary; two SPDT outputs; internal hex screw adjustment Type F403 - Bulb and capillary; three SPDT outputs; internal hex screw adjustment
4 0 0 - B - 0 7
W W W

U E O N L I N E

C O M

11

400 S e r i e s
how to order options
sWITCH OPTIONs* 0140 0500 1010 1070 1520 DESCRIPTION Gold contacts, 1 A 125 VAC resistive. Not available models 440-443 Close deadband, 5 A 125/250 VAC resistive. Not available models 440-443, 520-535 & 540-547 DPDT switch, 10 A 125/250 VAC resistive; deadband and minimum set point will increase. Not available temperature versions, TYpe J403, TYpe H403 and models 440-449, 520-535, 540-547, 570-572 10 A 125 VDC resistive; deadband and minimum set point will increase. Not available tYpes B, E and models 440-449, 520-535, 540-547, 570-572 Adjustable deadband, 15 A 125/250/480 VAC resistive. Adjustment wheel changes rise setting only if adjustment on fall setting is required, use primary adjustment (see product Installation & Maintenance instructions for additional information or consult UE). NOTE: NOT AVAILABLE ON MIDDLE SWITCH For TYpe J403, C403 and F403. Not available tYpes B, E, H, or models 440-443, 520-535, 540-547, 570-572, 610-614 External manual reset, 15 A 125/250/480 VAC resistive, latches on rise only. Not available triple switch versions, or models 440-443, 520-535, 570-572 High ambient, 15 A 125/250/480 VAC resistive; temperatures up to 250F/145C. Not available models 440-443, 520-535 Vapor-sealed 15 A 125/250 VAC resistive. Not available models 440-443, 520-535 Fungus resistant case, 15 A 125/250 VAC resistive. Not available models 440-443, 520-535 20 A 125/250/480 VAC resistive. Not available models 440-443, 520-535, 540-547, 570-572 Single red status light, 115 VAC only. Specify whether light goes on or off with increasing or decreasing pressure or temperature. Not available J400K, H400K, J402K, H402K or models 440-443, 449 Factory set one switch; specify set point on increasing or decreasing pressure, differential pressure or temperature. Not available dual or triple switch versions Factory set two switches; specify set points on increasing or decreasing pressure, differential pressure or temperature. Not available single or triple switch versions Factory set three switches; note: the third or middle switch must always be set to highest pressure or temperature when switches are set apart; specify set points on increasing or decreasing pressure, differential pressure or temperature. Not available single or dual switch versions Differential pressure indication. available J400K and J402K, models 147, S147B, 157 & S157B Range indicated on nameplate in kPa or MPa, factory selected. Not available temperature versions Range indicated on nameplate in Kg/cm2. Not available temperature versions Gasketed Lexan window. Not available on j, c, f TYpes Intrinsic safety compliance for European Union per ATEX standards Intrinsic safety compliance for Russia per Gosgortechnadzor standards Paper ID tag Stainless steel ID tag & wire attachment Surface mounting hardware kit that is required for models 520-535 when surface mounting. Use option code only at time of ordering product, otherwise use surface and pipe mounting kit part number 6361-704 as a separate order or for other models. 316L Stainless steel immersion temperature stem. Available temperature models 120, 121 onlY Viton construction (deadband and low end range may increase slightly); wetted parts include Viton with standard connection material. AVAILABLE MODELS 448-454 and 540-547. TYPES J400K & J402K MODELS 455-457 include Viton sealing diaphragms and O-rings with Teon main diaphragm. TYPES H400K & H402K MODELS 456-457 include Viton sealing diaphragms and O-rings with Teon main diaphragm. MODELS 610-614 (Viton O-ring only). Oxygen service cleaning; alcohol cleaning to remove residue from the process connection. Not available ON models 440-443 or H400K-455 and H402K-455. Watertight conduit tting; converts 7/8 hole to 1/2 NPT tting. Required for product to meet NEMA 4X if using knockout holes for wiring 1/4 NPT (female) stainless steel pressure connection. Available models S126B-S146B, S156B, S164B onlY 1/2 NPT (female) stainless steel pressure connection. Available models 358-376 1/4 NPT (female) brass pressure connection. Available models 610-614, TYpe J402 onlY Surface and pipe mount hardware kit for all models. Required for surface mounting needs 520-535, if not previously ordered with option M449. Watertight conduit tting; connects 7/8 hole to 1/2 NPT (female) tting, if not previously ordered with option M900
*All switches have limited DC capabilities. Consult factory for details. 12
W W W

400 Seri es

1530 1535 1537 1539 2000 OTHER OPTIONs M020 M201 M202 M203 M210 M277 M278 M321 M405 M406 M444 M446 M449 M504 M540

M550 M900 M913 M914 M921 6361-704 SD6286-51

U E O N L I N E

C O M

4 0 0 - B - 0 7

400 Series

how to order options

(continued)

OPTIONAL MATERIAL FOR WC SENSORS: (AvAILABLE MODELs 520-525) XC001 Aluminum pressure connection, Viton diaphragm, Viton O-Ring XC002 Aluminum pressure connection, Kapton diaphragm, Buna-N O-Ring XC003 Aluminum pressure connection, Kapton diaphragm, Viton O-Ring XC004 316L stainless steel pressure connection, 316L stainless steel diaphragm, Viton O-Ring (Over range pressure is limited to 100 psi) XC005 316L stainless steel pressure connection, Viton diaphragm, Viton O-Ring XC007 316L stainless steel pressure connection, Teon diaphragm, Viton O-Ring

options for temperature models

UNION CONNECTORS** For all bulb & capillary switches, types E and F Option Replacement Number Description Brass W027 SD6213-27 12 NPT w/ 34 bushing W045 SD6213-45 34 NPT W051 SD6213-51 12 NPT 304 Stainless Steel W028 SD6213-28 12 NPT w/ 34 bushing W046 SD6213-46 34 NPT W050 SD6213-50 12 NPT THERMOWELLS** For all bulb & capillary switches, types E and F Brass W075 SD6225-75 12 NPT with 34 NPT adapter bushing, 4 BT W191 SD6225-191 12 NPT, 4 BT W118 SD6225-118 12 NPT with 34 NPT adapter bushing, 7 BT W192 SD6225-192 12 NPT, 7 BT 316 Stainless Steel W076 SD6225-76 34 NPT, 4.5 BT W193 SD6225-193 12 NPT, 4.5 BT W119 SD6225-119 34 NPT, 7.5 BT W177 SD6225-177 12 NPT, 7.5 BT For all immersion stem switches; types B and C W139 SD6225-139 34 NPT X 1-23/32 BT, BRASS W140 SD6225-140 34 NPT X 1-23/32 BT, 316 ST/ST

W000 IMMERSION STEM AND THERMOWELLS Note: Option W000 is a special Immersion Stem construction that has no external thread. This option ts inside a special thermowell and is secured with a set-screw. Available on types B and C only. Option Description W000 Immersion stem only, brass W097 Immersion stem and thermowell. Includes W000 stem and 12 NPT x 1-23/32 BT brass thermowell W099 Immersion stem and thermowell. Includes W000 stem and 12 NPT x 1-23/32 BT 316 st/st thermowell. OPTIONAL LENGTHS: Optional immersion stem lengths to 15 may be available in Brass, with or without 316 ST/ST thermowell. Consult UE for additional information and availability. Optional capillary length to *50 may be available in Copper or 304 ST/ST. Armor or Teon capillary protection may be available to lengths less than or equal to capillary length. Consult UE for additional information and availability.
* Consult UE regarding repeatability and ambient effects on capillary lengths over 30. ** Dimensional drawings for union connectors and thermowells may be found at www.ueonline.com

4 0 0 - B - 0 7

W W W

U E O N L I N E

C O M

13

400 S e r i e s

400 Seri es

dimensional drawings
Internal Hex Screw Set Point Adjustment

Dimensional drawings for all models may be found at www.ueonline.com

Dimension A Models Pressure 126-164 S126B-S164B 270-376 440-443, 449 451, 453, 454 448, 450, 452 520-525 530-535
5.09 [129.7mm] 5.5 [139.4mm]

Types J400, J402, J403, J400K, J402K, C400, C402, C403, F400, F402, F403

Inches 5.91 6.31 5.50 4.28 5.03 8.25 8.13 4.56 5.03 4.56 6.31 6.13 6.13 7.00 7.97 8.03 7.38 6.72

mm 150.0 160.3 139.7 108.7 127.8 209.6 206.5 115.8 127.8 115.8 160.3 155.7 155.7 177.8 202.4 204.0 187.3 170.7

NPT 1/4 1/2 1/4 1/4 1/4 1/2 1/2 1/4 1/4 1/4 1/4 1/4 1/2 1/4 1/8 1/8 Immersion Stem Bulb & Capillary

Set Point Adjustment via Reference Dial

Types H400, H402, H403, H400K, H402K, B400, B402, B403, E400, E402, E403

551, 553-555 550, 552 570-572 610-614 Differential Pressure 147-157 S147B-S157B 455-559
1.59 [40.2mm]

540-543 544-547 Temperature 120, 121 1BS-8BS

Pressure Sensors All dimensions stated in inches (millimeters)

Models 126-164 Models S126B-S164B Models 270-376 Models 440-454, 550-555, 570-572

Models 610-614

Models 520-525

Models 530-535

14

W W W

U E O N L I N E

C O M

4 0 0 - B - 0 7

400 Series

dimensional drawings

Dimensional drawings for all models may be found at www.ueonline.com

Differential Pressure Sensors Temperature Sensors

Models 147-157 Models 540-543 Models 120-121

Local mount temperature version

Models S147B-S157B

Models 544-547
(Low & High)

Models 1BS-8BS

Remote mount temperature version

Models 455-457, 559

4 0 0 - B - 0 7

W W W

U E O N L I N E

C O M

15

RECOMMENDED PRACTICES AND WARNINGS United Electric Controls Company recommends careful consideration of the following factors when specifying and installing UE pressure and temperature units. Before installing a unit, the Installation and Maintenance instructions provided with unit must be read and understood. To avoid damaging unit, proof pressure and maximum temperature limits stated in literature and on nameplates must never be exceeded, even by surges in the system. Operation of the unit up to maximum pressure or temperature is acceptable on a limited basis (e.g., start-up, testing) but continuous operation must be restricted to the designated adjustable range. Excessive cycling at maximum pressure or temperature limits could reduce sensor life. A back-up unit is necessary for applications where damage to a primary unit could endanger life, limb or property. A high or low limit switch is necessary for applications where a dangerous runaway condition could result. The adjustable range must be selected so that incorrect, inadvertent or malicious setting at any range point cannot result in an unsafe system condition. Install unit where shock, vibration and ambient temperature fluctuations will not damage unit or affect operation. When applicable, orient unit so that moisture does not enter the enclosure via the electrical connection. When appropriate, this entry point should be sealed to prevent moisture entry. Unit must not be altered or modied after shipment. Consult UE if modication is necessary. Monitor operation to observe warning signs of possible damage to unit, such as drift in set point or faulty display. Check unit immediately. Preventative maintenance and periodic testing is necessary for critical applications where damage could endanger property or personnel. Electrical ratings stated in literature and on nameplate must not be exceeded. Overload on a switch can cause damage, even on the rst cycle. Wire unit according to local and national electrical codes, using wire size recommended in installation sheet. Do not mount unit in ambient temp. exceeding published limits. LIMITED WARRANTY Seller warrants that the product hereby purchased is, upon delivery, free from defects in material and workmanship and that any such product which is found to be defective in such workmanship or material will be repaired or replaced by Seller (Ex-works, Factory, Watertown, Massachusetts. INCOTERMS); provided, however, that this warranty applies only to equipment found to be so defective within a period of 24 months from the date of manufacture by the Seller. Seller shall not be obligated under this warranty for alleged defects which examination discloses are due to tampering, misuse, neglect, improper storage, and in any case where products are disassembled by anyone other than authorized Sellers representatives. EXCEPT FOR THE LIMITED WARRANT Y OF REPAIR AND REPLACEMENT STATED ABOVE, SELLER DISCLAIMS ALL WARRANTIES WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE. LIMITATION OF SELLERs LIABILITY Sellers liabilitY to BuYer for anY loss or claim, including liabilitY incurred in connection with (i) breach of anY warrantY whatsoever, expressed or implied, (ii) a breach of contract, (iii) a negligent act or acts (or negligent failure to act) committed bY Seller, or (iv) an act for which strict liabilitY will be inputted to seller, is limited to the limited warrantY of repair and/or replacement as so stated in our warrantY of product. In no event shall the Seller be liable for anY special, indirect, conseQuential or other damages of a like general nature, including, without limitation, loss of profits or production, or loss or expenses of anY nature incurred bY the buYer or anY third partY. UE specications subject to change without notice.

U.S. SALEs OFFICEs United Electric Controls 31 Old Stage Road Hampton Falls, NH 03844 Phone: 617-899-1132 United Electric Controls 28 N. Wise Ave. Freeport, IL 61032 Phone: 815-341-2588 United Electric Controls 1022 Vineyard Drive Conyers, GA 30013 Phone: 770-335-9802 United Electric Controls 5829 Grazing Court Mason, OH 45040 Phone: 513-535-5486 United Electric Controls 102 Salazar Court Clayton, CA 94517 Phone: 925-408-5997 United Electric Controls 27 Summit Terrace Sparta, NJ 07871 Phone: 973-271-2550

INTERNATIONAL OFFICEs CHINA United Electric Controls, Shanghai Ofce Room 1011, 10th Flr, Huai Hai Zhonghua Building No. 885, Renmin Road, Luwan District Shanghai 200010, P.R. China Phone: +8621-6255 8059 email: [email protected] United Electric Controls, Beijing Ofce Room 1006, Jainhao International Bldg. Block D, No. 116 Zizhuyuanlu, Haidian District Beijing, China 100089 Phone & Fax: +86-10-5893-0551

email: [email protected]

email: [email protected]

email: [email protected]

email: [email protected]

EUROPE United Electric Controls 05-806 Komorow Kujawska 5, Poland Phone: +48 22 499 4804

email: [email protected]

email: [email protected]

email: [email protected]

INDIA United Electric Controls 402, Aries Avenue - I, 58-United Colony Sama, Baroda - 390008 India Phone: (+91) 265 3191711
email: [email protected]

ASIA-PACIFIC United Electric Controls, Far East No. 1-2-2, 2nd Floor United Electric Controls Jalan 4/101C 33018 Weatherby Court Cheras Business Centre Fulshear, TX 77441 Batu 5, Jalan Cheras Phone: 832-457-6138 56100 Kuala Lumpur, Malaysia email: [email protected] Phone: 603-9133-4122
email: [email protected] email: [email protected]

CANADA EASTERN 68 Mosley Crescent Brampton, Ontario Canada L6Y 5C8 Phone: 905-455-5131 FAX: 905-455-5131

MEXICO-LATIN AMERICA United Electric Controls Zacatecas #206 Suite 20 Col Guadalupe CP 89120 Tampico, Tamaulipas Mexico Phone: 52 (833) 2175201

email: [email protected]

RUSSIA & SCANDINAVIA United Electric Controls, Moscow Elninskaya str., 15-140 Moscow, 121552, Russia Phone: +7 (495) 792-88-06
email: [email protected]

UNITED ELECTRIC CONTROLS

180 Dexter Avenue, P.O. Box 9143 Watertown, MA 02471-9143 USA Telephone: 617 926-1000 Fax: 617 926-2568 http://www.ueonline.com

CP11111000