Scribd
Upload
8K views4 pages

Change in Trim Due To Change in Density

When a ship moves between bodies of water with different densities, its draft and trim will change due to the shift in its center of buoyancy. As shown in the example calculation, a ship initially floating with a mean draft of 11.969 meters in water with a density of 1.000 ton/m3 will rise to a mean draft of 12.024 meters upon entering water with a slightly lower density of 0.9954 ton/m3. This causes the center of buoyancy to shift forward by 0.03 meters, resulting in a change in trim of 0.022 meters forward as calculated using three different methods.

Uploaded by

gipanaul
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
8K views4 pages

Change in Trim Due To Change in Density

When a ship moves between bodies of water with different densities, its draft and trim will change due to the shift in its center of buoyancy. As shown in the example calculation, a ship initially floating with a mean draft of 11.969 meters in water with a density of 1.000 ton/m3 will rise to a mean draft of 12.024 meters upon entering water with a slightly lower density of 0.9954 ton/m3. This causes the center of buoyancy to shift forward by 0.03 meters, resulting in a change in trim of 0.022 meters forward as calculated using three different methods.

Uploaded by

gipanaul
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Change In Trim Due To Change In Density Prepared by Capt. B.

Ceylan When a ship passes from water of one density to water of another the hydrostatic draft changes. Furthermore, the change in the position of the center of the buoyancy may cause the trim to change.

Figure 1 Let the ship in Figure 1 float in salt water at the waterline WL. B represents the position of the center of buoyancy and the G the center of the gravity. For equilibrium, B and G must be in the same vertical line. If the ship now passes into the fresh water, the mean draft will increase. Let W1L1 represent the new waterline and bthe center of gravity of the extra volume of water displaced. The center of buoyancy of the ship will move from B to B1in the direction directly towards b. The force of buoyancy now acts vertically upwards through B1 and the ships weight acts vertically downward through G. The ship will then change trim to bring the centers of gravity and buoyancy back in to the same vertical line. : displacement G: center of gravity B: center of buoyancy B1: shifted center of buoyancy F: center of floatation q: density q1: reduced density d: difference between LCB and LCF V: underwater volume of the vessel v: increment of volume Change of Trim = {W x BB1} / MCTC * The horizontal shift of the center of buoyancy BB1 can be found from BB1 = v x d / V + v * Moment changing trim = x BB1 * The increment of volume can be found from

v = Sinkage x area of waterplane v = s x[(TPC x 100)/q] Sinkage can be found from (D + s) / D = q / q1 equals s = D x [(q/q1) - 1]

Example: A vessel is floating at drafts: Fwd: 11.914 m, Mid: 11.900 m and Aft: 12.024 m in 1.000 ton/m3 water density. She is to enter water density 0.9954 ton/m3. Find her drafts Fwd, Mid and Aft in dock water. ( Figures are taken from the hydrostatic table of M/V North Princess) MCTC = 974.57 ton m/cm. TPC = 64.4 ton/cm LCF = 0.62 (A) LCB = (-) 5.90 (F) Length = 216.9 m Displacement = 70650.50 tons Initial mean draft: dml = da ( l/L ) x t = 12.024 (107.865 / 216.9) x 0.11 = 11.969 m (Initial Mean Draft also can be found from (11.914 + 12.024) / 2 = 23.938 / 2 = 11.969 m) Final mean draft: dmF = dml x q1/qF = 11.969 x 1.000/0.9954 = 12.024 m Sinkage: s = dmF dml = 12.024 11.969 = 0.055 m V=/q = 70650.50 / 1.000 m3 = 70650.50 m3 v = V ( q1 / qF 1 ) = 70650.50 x ((1.000 / 0.9954) 1) = 326.49 m3 BB1 = v x d / V + v

= (326.49 x (5.90+0.62)) / (70650.50 + 326.49) = 2128.71/ 70976.99 m = 0.03 m Trim = moment changing trim / MCTC = x BB1 / MCTC = 70650.50 x 0.03 / 974.57 = 2.2 cm = 0.022 m by Fwd Change of trim aft = l/L x change of trim = 107.865 / 216.9 x 2.2 = 1.1 cm = (-) 0.011 m (aft) Change of trim forward = 2.2 1.1 = 1.1 cm = (+) 0.011 m (fwd) Fwd (m) Initial Draft Sinkage Trim Final Draft 11.914 0.055 11.969 (+) 0.011 11.98 11.955 Mid (m) 11.900 0.055 11.955 Aft (m) 12.024 0.055 12.079 (-) 0.011 12.068

2nd Method: Change of Trim= [ x {D2 D1} x {LCF LCB}] / D1 x MTC2 D1= 11.969 m D2= 12.024 m LCF= 0.62 LCB = (-) 5.90 MTC2 = 976.22 Trim = [70650.50 x {12.024 11.969} x {0.62+5.90}] / 11.969 x 976.22 = 0.022 m by Fwd 3rd Method: Change of Trim = [{LCB1 - LCB2} x W] / MTC x 100 LCB1 @ 11.969 = (-) 5.90 LCB2 @ 12.024 = (-) 5.87 Trim = [{5.90 5.87} x 70650.50] / 974.57 x 100 = 0.022 m

End...

You might also like