Scribd
Upload
145 views2 pages

Genie Scc755ps

The Model 755(tm) is an adjustable length, membrane tip probe regulator. It can be inserted and extracted from a pressurized line through a full opening valve. The sample pressure is reduced immediately after the membrane, inside of the line, to prevent condensation during pressure reduction.

Uploaded by

Wellington Xavier Pazmiño Rodríguez
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
145 views2 pages

Genie Scc755ps

The Model 755(tm) is an adjustable length, membrane tip probe regulator. It can be inserted and extracted from a pressurized line through a full opening valve. The sample pressure is reduced immediately after the membrane, inside of the line, to prevent condensation during pressure reduction.

Uploaded by

Wellington Xavier Pazmiño Rodríguez
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

direct drive probe

Model 755

Quick Study
Liquid carry over from the pipeline into the sample system should be prevented when sampling natural gas as it can directly impact the accuracy of the analysis and damage the analyzer. Industry standards state that equipment used to remove liquid from the sample must be operated at flowing temperature and pressure conditions. Genie Probes provide a means to insert Genie Membrane Technology directly into a pipeline for the purpose of separating unwanted liquid and particulate from the gas sample at flowing temperature and pressure conditions, in compliance with industry standards.

The Model 755 is an adjustable length, membrane tip

probe regulator that can be inserted and extracted from a pressurized line through a full opening valve without the use of a special insertion device or the force and bulky equipment associated with pneumatic or hydraulic methods. The sample pressure is reduced immediately after the membrane, inside of the line, to prevent condensation during pressure reduction. The 755 can be mounted vertically or horizontally, and its installation process is simple and straightforward.

Applications
}} }} }} }}

Continuous gas sampling Extract a representative sample from a multi phase gas source Pressure regulation Protection against liquid and particulate }} Online and portable analyzers }} Sample system components

Technical Specifications
Maximum pressure rating Maximum temperature Port sizes Probe lengths
(for other lengths contact the factory)

3,750 psig 185 F (85 C) with membrane 225 F (107 C) without membrane Outlet: 1/4 female NPT Auxillary: 1/8 female NPT (plugged from factory) L: 8 12, 24 A: ~ 20 24, 36
(refer to L & A dimensions on back)

Benefits
}} }} }} }} }} }}

Easy, quick, safe insertion and extraction from pressurized system Does not require special insertion device or hydraulic fluid Horizontal or vertical mounting API 14.1, GPA 2166 and ISO 10715 probe compliance Helps to preserve sample integrity Pipeline gas helps to offset temperature changes at regulation point

Outlet pressure range (psig) Installation valve requirement Wetted materials

0-10, 0-25, 0-50, 0-100, 0-250


(other ranges available upon request)

3/4" , 1 or 1.5 NPT full opening valve


(others available upon request)

Machined parts: 316 stainless steel / NACE compliant and Kevlar threaded bushing All other metal parts: stainless steel / NACE compliant Sealing material: Teflon / Neoprene standard Regulator seat material: Teflon Membrane: inert

Features
}} }} }} }} }} }}

}}

Genie Membrane Technology Field serviceable regulator seat and packing material Vibration resistant Adjustable length Optional pressure ranges Analytically Correct Design }} Low internal volume }} No dead volume Stainless steel construction
Genie, Direct Drive Probe, and Genie Membrane TechnologyTM are trademarks or registered trademarks of A+ Corporation, LLC. All other referenced trademarks are the property of their respective owners.

An ISO 9001:2008 certied company

Model Numbering & Additional Part Numbers


Your model number is determined by your specic needs. Choose options below.

Sealing material ! Membrane type Process connection Outlet pressure range (psig) Regulator outlet port Probe insertion length (L) Sealing material replacement Membrane replacement Optional speed wrench Optional gauge How to build the model number:
755
! Sealing material

(other materials available upon request) 0 = Teflon / Neoprene 6 = Type 6/BTU 0= No membrane

3 = 3/4" NPT

4 = 1 NPT

6 = 1.5 NPT

00 = 0-25 01 = 0-50 02 = 0-100 03 = 0-250 09 = 0-10 1 = 1/4 MNPT to 1/8 tube connector 4 = 1/4 FNPT 8, 12, 24 inches Part # 75X-570 Part # 75X-CMA-506 Part # ACC-SW Part # ACC-Q14KC (sold separately) (contains 1 complete assembly) (sold separately) (sold separately) (0 - 4,000 psig) (sold separately)

SS

Membrane type Process connection Outlet pressure range Regulator outlet port Probe insertion length
We cannot recommend specific sealing materials due to the complex nature of sample stream compositions. Temperature and pressure also may be factors. Unless specified otherwise, the product will ship with our standard sealing materials and materials of construction stated in the technical specifications section of the corresponding Product Sheet. ! Please refer to www.dupontelastomers.com for sealing material recommendations and advice. It is the users responsibility to specify the sealing materials and other materials of construction for their application.
! !

Dimensions

Uninstalled

Installed
4.3

0.4

INSERTION DEPTH MARKING NUTS 7.6 PROCESS CONNECTION 1/8 NPT AUXILLARY PORT 1 - 3/8 WRENCH FLATS

6.4

5.6

1.5

Local Distributor:

41041 Black Bayou Road Gonzales, LA 70737


Phone: (225)-644-5255 Fax: (225)-644-3975
An ISO 9001:2008 certied company

Manufacturer A+ Corporation, LLC

Call for expert product application assistance:


Website: www.geniefilters.com E-mail: [email protected]
SCC-755-PS_0711

2010 A+ Corporation, LLC. All rights reserved.

You might also like