Scribd
Upload
127 views

1N4620

The document describes 1N4099 through 1N4135-1 and 1N4614 through 1N4627-1 series of 500 mW glass axial-lead low noise zener diodes. It provides details on electrical characteristics, maximum ratings, features, applications and benefits, mechanical specifications, and graphs of power derating and capacitance vs zener voltage.

Uploaded by

Deepa Devaraj
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
127 views

1N4620

The document describes 1N4099 through 1N4135-1 and 1N4614 through 1N4627-1 series of 500 mW glass axial-lead low noise zener diodes. It provides details on electrical characteristics, maximum ratings, features, applications and benefits, mechanical specifications, and graphs of power derating and capacitance vs zener voltage.

Uploaded by

Deepa Devaraj
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

1N4099 thru 1N4135-1 and

1N4614 thru 1N4627-1 DO-35


500 mW GLASS AXIAL-LEAD LOW NOISE
ZENER DIODES

SCOTTSDALE DIVISION

APPEARANCE

The popular 1N4099 thru 1N4135 and 1N4614 thru 1N4627 series of 0.5
watt Zener Voltage Regulators provides a selection from 1.8 to 100 volts in
standard 5% tolerances as well as tighter tolerances identified by different
suffix letters on the part number. These glass axial-leaded DO-35 Zeners
are also available with an internal-metallurgical-bond option by adding a -1
suffix. This type of bonded Zener package construction is also available in
JAN, JANTX, and JANTXV military qualifications. Microsemi also offers
numerous other Zener products to meet higher and lower power applications.

DO-35
(DO-204AH)

IMPORTANT: For the most current data, consult MICROSEMIs website: http://www.microsemi.com

FEATURES

APPLICATIONS / BENEFITS

JEDEC registered 1N4099 thru 1N4135 and 1N4614


thru 1N4627 series
Internal metallurgical bond option available by
adding a -1 suffix
Also available in JAN, JANTX, and JANTXV
qualifications per MIL-PRF-19500/435 by adding the
JAN, JANTX, or JANTXV prefixes to part numbers
for desired level of screening as well as 1 suffix;
(e.g. JANTX1N4099-1, JANTXV1N4109C-1, etc.)
Military Surface Mount available in DO-213AA
package outline by adding a UR-1 suffix in addition
to the JAN, JANTX, and JANTXV prefix; e.g.
JANTX1N4099UR-1 (see separate data sheet)
Commercial Surface Mount also available in
separate data sheet as 1N4099UR to 1N4135UR,
and 1N4614UR to 1N4627UR in DO-213AA
package (consult factory for others)
DO-7 glass body axial-leaded Zener equivalents are
also available

MAXIMUM RATINGS

Regulates voltage over a broad operating


current and temperature range
Extensive selection from 1.8 to 100 V
Standard voltage tolerances are plus/minus 5%
with no suffix
Tight tolerances available in plus or minus 2%
or 1% with C or D suffix respectively
Flexible axial-lead mounting terminals
Nonsensitive to ESD per MIL-STD-750 Method
1020
Minimal capacitance (see Figure 3)
Inherently radiation hard as described in
Microsemi MicroNote 050

MECHANICAL AND PACKAGING

CASE: Hermetically sealed axial-lead glass


DO-35 (DO-204AH) package
TERMINALS: Leads, tin-lead plated solderable
per MIL-STD-750, method 2026
POLARITY: Cathode indicated by band where
diode is to be operated with the banded end
positive with respect to the opposite end for Zener
regulation
MARKING: Part number
TAPE & REEL option: Standard per EIA-296
(add TR suffix to part number)
WEIGHT: 0.2 grams
See package dimensions on last page

Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503

Page 1

1N4099 1N4135-1
4135-1 &
1N4614 1N4627-1 (DO-35)

Operating and Storage temperature: -65 C to


+175C
Thermal Resistance: 250 C/W junction to lead at
3/8 (10 mm) lead length from body, or 310C/W
junction to ambient when mounted on FR4 PC board
(1 oz Cu) with 4 mm2 copper pads and track width 1
mm, length 25 mm
Steady-State Power: 0.5 watts at TL < 50oC 3/8 inch
(10 mm) from body or 0.48 W at TA < 25C when
mounted on FR4 PC board as described for thermal
resistance above (see Figure 2 for derating)
Forward voltage @200 mA: 1.1 volts
Solder Temperatures: 260 C for 10 s (max)

Copyright 2003
11-05-2003 REV C

WWW . Microsemi .C OM

DESCRIPTION

1N4099 thru 1N4135-1 and


1N4614 thru 1N4627-1 DO-35
500 mW GLASS AXIAL-LEAD LOW NOISE
ZENER DIODES

SCOTTSDALE DIVISION

NOMINAL
ZENER
VOLTAGE
VZ @ IZT
(Note 1)

JEDEC
TYPE NO.

ZENER
TEST
CURRENT
IZT

VOLTS

OHMS

VOLTS

V / HZ

mA

%/ C

1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
8.7
9.1
10
11
12
13
14
15
16
17
18
19
20
22
24
25
27
28
30
33
36
39
43
47
51
56
60
62
68
75
82
87
91
100

250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250
250

1200
1250
1300
1400
1500
1600
1650
1700
1650
1600
1550
1500
1400
1200
200
200
200
200
200
200
200
200
200
200
100
100
100
100
150
150
150
150
150
150
200
200
200
200
200
250
250
300
300
400
500
700
700
800
1000
1200
1500

7.5
5.0
4.0
2.0
1.0
0.8
7.5
7.5
5.0
4.0
10.0
10.0
10.0
10.0
10.0
10.0
1.0
1.0
1.0
1.0
.05
.05
.05
.05
.05
.05
.05
.05
.05
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01
.01

1
1
1
1
1
1
1.5
2
2
2
3
3
4
5
5.17
5.70
6.24
6.61
6.92
7.60
8.44
8.12
9.857
10.65
11.40
12.15
12.92
13.67
14.44
15.20
16.72
18.25
19.00
20.45
21.28
22.80
25.08
27.38
29.65
32.65
35.75
38.76
42.60
45.60
47.10
51.68
57.00
62.32
66.12
69.16
76.00

1
1
1
1
1
1
1
1
1
1
1
2
4
5
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40
40

120
110
100
95
90
87
85
83
80
77
75
70
65
61
56
51
46
44
42
38
35
32
29
27
25
24
22
21
20
19
17
16
15
14
14
13
12
11
9.8
8.9
8.1
7.5
6.7
6.4
6.1
5.6
5.1
4.6
4.4
4.2
3.8

-0.075
-0.075
-0.075
-0.075
-0.075
-0.075
-0.075
-0.065
-0.060
-0.050
-0.050+0.020
-0.045 +0.030
-0.020 +0.040
-0.010 +0.050
0.060
0.065
0.070
0.075
0.080
0.080
0.080
0.080
0.080
0.085
0.085
0.085
0.090
0.090
0.090
0.090
0.090
0.090
0.090
0.090
0.095
0.095
0.095
0.095
0.095
0.095
0.095
0.100
0.100
0.100
0.100
0.100
0.100
0.100
0.100
0.100
0.100

MAXIMUM REVERSE
CURRENT
IR @ V R

MAXIMUM
NOISE
DENSITY
ND @ IZT
(Figure 1)

MAXIMUM
ZENER
CURRENT
IZM
(Note 3)

*JEDEC Registered Data.


NOTES: 1.
2.
3.

The JEDEC type numbers shown with no suffix have a standard tolerance of +/-5% on the nominal Zener voltage: suffix C is used
o
to identify +/-2%; and suffix D is to identify +/-1% tolerance. VZ is measured with the diode in thermal equilibrium in 25 C still air.
Zener impedance is derived by superimposing on IZT a 60 Hz rms ac current equal to 10% of IZT (25A). See MicroNote 202 for
zener impedance variation with different operating currents.
o
Based upon 400 mW maximum power dissipation at 25 C lead temperature, allowance has been made for the higher voltage
associated with operation at higher currents.

Copyright 2003
11-05-2003 REV C

Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503

Page 2

1N4099 1N4135-1 &


1N4614 1N4627-1 (DO-35)

1N4614
1N4615
1N4616
1N4617
1N4618
1N4619
1N4620
1N4621
1N4622
1N4623
1N4624
1N4625
1N4626
1N4627
1N4099
1N4100
1N4101
1N4102
1N4103
1N4104
1N4105
1N4106
1N4107
1N4108
1N4109
1N4110
1N4111
1N4112
1N4113
1N4114
1N4115
1N4116
1N4117
1N4118
1N4119
1N4120
1N4121
1N4122
1N4123
1N4124
1N4125
1N4126
1N4127
1N4128
1N4129
1N4130
1N4131
1N4132
1N4133
1N4134
1N4135

MAXIMUM
TEMP.
COEFF. OF
ZENER
VOLTAGE
VZ

MAXIMUM
ZENER
IMPEDANCE
ZZT
(Note 2)

WWW . Microsemi .C OM

*ELECTRICAL CHARACTERISTICS @ 25oC

1N4099 thru 1N4135-1 and


1N4614 thru 1N4627-1 DO-35
500 mW GLASS AXIAL-LEAD LOW NOISE
ZENER DIODES

SCOTTSDALE DIVISION

WWW . Microsemi .C OM

CIRCUIT AND GRAPHS

Rated Power Dissipation (mW)

Noise density, (ND) is specified in microvolt-rms per squreroot-hertz. Actual measurement is performed using a 1 KHz
to 3 KHz frequency bandpass filter at a constant Zener test
o
current (IZT) AT 25 C ambient temperature. ND is calculated
from the formula.

FIGURE 1
NOISE DENSITY MEASUREMENT CIRCUIT

TL Lead Temperature ( C) 3/8 from body


or TA on FR4 PC Board

FIGURE 2 POWER DERATING CURVE


PACKAGE DIMENSIONS

Copyright 2003
11-05-2003 REV C

1N4099 1N4135-1
4135-1 &
1N4614 1N4627-1 (DO-35)

FIGURE 3
CAPACITANCE vs. ZENER VOLTAGE
(TYPICAL)

All dimensions in: INCH


mm

Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503

Page 3

This datasheet has been download from:


www.datasheetcatalog.com
Datasheets for electronics components.

You might also like