GARAGE STORAGE & ORGANIZATION

FULLY WELDED CONSTRUCTION

GARAGE STORAGE & ORGANIZATION

FULLY WELDED CONSTRUCTION

CADET-7203

CADET 7203 2-DOOR STORAGE CABINET

Extra large capacity storage cabinet has 72-inches of vertical storage making the most of its 36-inch width and 18-inch depth. More storage than many other floor cabinets. Full length steel doors open up to 180 degrees. Cabinet is fully lockable with key coded cylinder lock. All steel construction. Includes 2 adjustable steel shelves that can be adjusted in four-inch increments and a fixed steel shelf. Includes adjustable leveling feet. Overall 36" W x 18" D x 72" H 91cm x 46cm x 183cm (without levelers)

GARAGE STORAGE & ORGANIZATION

FULLY WELDED CONSTRUCTION

CADET-1250

CADET-1250 2-DOOR WALL CABINET

Cabinet is fully lockable with 2 point locking bar and key coded cylinder lock for added security. Includes 2 adjustable steel shelves that can be adjusted in two-inch increments. Steel pegboard side panels allow for hanging storage which is ideal for electrical cords, trouble lights, levels and more. Overall 26-1/2" W x 12-1/4" D x 29" H 67cm x 31cm x 74cm

CADET-6624

CADET-6624 WORKBENCH
All steel frame construction can stand up to daily use. 1-1/4-inch thick treated medium density fiber board work surface provides a large, convenient work area. Work surface includes a finished front edge. Full width steel support beam on the back of the workbench provides greater strength and rigidity. Also acts as back stop for project centers. Positive-Fit construction provides easy, quick assembly. All fastening hardware is included. Includes adjustable leveling feet. Overall 66" W x 24" D x 39" H (with levelers) 168cm x 61cm x 99cm

GARAGE STORAGE & ORGANIZATION

FULLY WELDED CONSTRUCTION

CADET-1600 2-DOOR PROJECT CENTER

Includes 2 adjustable steel shelves that can be adjusted in two-inch increments. Steel pegboard side panels allow for hanging storage which is ideal for electrical cords, trouble lights, levels and more. A finished, 1/2-inch thick medium density fiber board work top is included. 4" x 1.75" swivel casters (2 with toe locks) make it easy to maneuver this cabinet in all directions. Glide down a narrow passage way between parked cars or be guided under the CADET Workbench for storage. Cabinet is fully lockable with 2 point locking bar and key coded cylinder lock for added security. Overall 26-1/2" W x 16" D x 34-3/8" H (with casters) 67cm x 40,6cm x 87cm

CADET-1600

CADET-1605 5-DRAWER PROJECT CENTER

CADET-1605 Includes 5 full extension steel drawers that glide on steel compound drawer slides. Steel inner walls provide added strength and durability. A finished, 1/2-inch thick medium density fiber board work top is included. 4" x 1.75" swivel casters (2 with toe locks) make it easy to maneuver this cabinet in all directions. Glide down a narrow passage way between parked cars or be guided under the CADET Workbench for storage. Cabinet is fully lockable with steel bar lock and key coded cylinder lock for added security. Overall 26-1/2" W x 16" D x 34-3/8" H (with casters) 67cm x 40,6cm x 87cm 3 Drawers 21-3/8" W x 15" D x 4" H, 54cm x 38,1cm x 10cm 2 Drawers 21-3/8" W x 15" D x 6" H, 54cm x 38,1cm x 15cm

GARAGE STORAGE & ORGANIZATION

FULLY WELDED CONSTRUCTION

CADET-SET 6 PIECE GARAGE STORAGE SYSTEM

Includes the following items: 2 - CADET-1250 Wall Cabinets, 1 - CADET-1600 2 door project center, 1 - CADET-1605 5 drawer project center, 1 - CADET-6624 workbench and 1 - CADET-7203 locker. Set is shipped on an individual skid and can be drop shipped.

FEATURES
Versatile garage storage components allow you to pick and choose the items that meet your storage needs. As your needs change or grow it is easy to add components to increase organization needs. All steel construction can stand up to daily use. Gloss black and silver tread plate baked epoxy paint finish resists solvents and moisture. Units are fully lockable to keep tools, chemicals and other supplies in place and out of the reach of small children.

ALL CABINETS ARE FULLY LOCKABLE

LARGE CAPACITY FLOOR CABINET BAKED EPOXY POWDER PAINT FINISH

ADJUSTABLE FLOOR LEVELERS

ALL STEEL CONSTRUCTION

P.O. Box 489, 1360 N. Old Rand Road, Wauconda, IL 60084 USA Phone: 847-526-1611, Fax: 847-526-6599, 1-800-323-9601, www.stack-on.com NOTE: The tools and supplies shown are for illustration purposes only and are not included with our tool storage products. Dimensions: Height-top to bottom; Width-left to right; Depth-front to back. All specifications subject to change without notice. 042009-500

Registered trademark/ TM Trademark of Whirlpool U.S.A. 2009. All Rights Reserved. Manufactured under license by Stack-On Products Co. Wauconda, IL.

Storage & Organization

Steel Construction, Ready to Assemble (RTA)

Garage, Work Shop, and Laundry Room

The upscale design and the finish of this system will enhance the appearance of any garage or other area of the house or facility that needs durable storage solutions. Assembles in minutes. The unique design of these units reduces the number of fasteners required for assembly and all of the units assemble in minutes. All Steel Construction no fasteners are visible from the front or sides of the units. Leveling Feet are included on floor models, adjustable from inside the cabinet. 3 Drawer Project Center has extra deep drawers, includes ball bearing slides which glide even when drawers are loaded.

Storage & Organization

Steel Construction, Ready to Assemble

GORTA-1603 Project Center with 3 Extra Deep Ball Bearing Drawers

All steel construction. Includes 3 extra deep drawers with ball bearing slides which allow the drawers to operate effortlessly, even when the drawers are fully loaded. Overall 26.5" W x 16" D x 34" H 67cm x 41cm x 86.4cm Not including levelers.

GORTA-1603

GORTA-1600

GORTA-1600 Project Center With Full Length Doors

All steel construction Includes 2 adjustable steel shelves that can be adjusted every 2 inches. Door pulls are located at the top of the project center for better access. Overall 26.5" W x 16" D x 34" H 67cm x 41cm x 86.4cm Not including levelers.

Storage & Organization

Steel Construction, Ready to Assemble

GORTA-1250

GORTA-125o Wall Cabinet with Full Length Doors

All steel construction Includes 2 adjustable steel shelves that can be adjusted every 2 inches. An easy-hang bracket is included which makes hanging the wall cabinet quick and painless. Door pulls are located at the bottom of the wall cabinet for better access. Overall 26.5" W x 12.25" D x 29" H 67cm x 31cm x 74cm

GORTA-7203 Full Sized Storage Cabinet

All steel construction Includes 3 adjustable steel shelves that can be adjusted every 2 inches. Fasteners are not visible from the front or sides of the unit for a finished look. Overall 36" W x 18" D x 72" H 91cm x 46cm x 183cm Not including levelers.
GORTA-7203

Storage & Organization

Steel Construction, Ready to Assemble
GORTA-56 wooden work surface for project center
Large, finished wooden work surface completes a set of project centers. Top is custom cut to fit the top of two project centers. Overall 56" W x 16" D x 1" H 142cm x 41cm x 2,5cm
GORTA-56

Stack-On Products Company P.O. Box 489, 1360 N. Old Rand Road, Wauconda, IL 60084 USA Phone: 847-526-1611, Fax: 847-526-6599, 1-800-323-9601 www.stack-on.com

NOTE: The tools and supplies shown are for illustration purposes only and are not included with the storage products. Dimensions: Height-top to bottom; Width-left to right; Depth-front to back. All specifications subject to change without notice. 052010-1500

Storage & Organization

Steel Construction, Pre-Assembled

STACK-ON GARAGE ORGANIZATION

Pre-assembled storage cabinets for the garage, work shop, laundry room, and more. Enhance the appearance of any area with these durable storage solutions. All steel construction for greater strength and durability. Adjustable shelves allow you to customize the cabinet interiors to meet your storage needs. 4 drawer base cabinet includes ball bearing drawer glides for greater strength and performance. Most units are fully assembled just add the leveling feet. (Included)

Storage & Organization

Steel Construction, Pre-Assembled

SGO-372

SGO-372 2 DOOR STORAGE CABINET

Large capacity storage cabinet has 72" of vertical storage to maximize your storage space. Cabinet is assembled just need to add leveling feetwhich are included. All steel construction provides greater strength and durability . Doors open up to 180 degrees allowing for greater access. Includes 2 adjustable steel shelves and 1 fixed shelf. Overall 36" W x 18" D x 72" H 91.4cm x 45.7cm x 182.9cm

SGO-1250 2 DOOR WALL CABINET

Wall cabinets provide out of the way storage when floor space is at a premium. Unit is fully assembled and easy to hang. All steel construction provides greater strength and durability. Doors open up to 180 degrees allowing for greater access. Includes 2 adjustable steel shelves. Overall 26-1/2" W x 12-1/4" D x 29" H 67.3cm x 31.1cm x 73.7cm

SGO-1250

Storage & Organization

Steel Construction, Pre-Assembled
SGO-1600

SGO-1600 2 DOOR PROJECT CENTER

Cabinet is assembled just need to add leveling base. Includes leveling feet. All steel construction provides greater strength and durability. Doors open up to 180 degrees allowing for greater access. Includes 2 adjustable steel shelves. Includes adjustable leveling feet and pedestal installation required. Overall 26-1/2" W x 16" D x 34-1/2" H 67.3cm x 40.6cm x 87.6cm

SGO-1604 4 DRAWER PROJECT CENTER

Cabinet is assembled just need to add leveling base. Includes leveling feet.  All steel construction provides greater strength and durability. Drawers glide on ball bearing slides, even when loaded. Includes adjustable leveling feet and pedestal installation required. Overall 26-1/2" W x 16" D x 34-1/2" H 67.3cm x 40.6cm x 87.6cm

SGO-1604

Storage & Organization

Steel Construction, Pre-Assembled
SGO-6624 66" WORKBENCH
All steel construction provides greater strength and durability. Large 1" thick, treated MDF work surface provides a large work area. Engineered design makes assembly quick and easy. Adjustable leveling feet are included. Assembly required. Overall 66" W x 24" D x 39" H 167.6cm x 61cm x 99.1cm

SGO-6624

Stack-On Products Company P.O. Box 489, 1360 N. Old Rand Road, Wauconda, IL 60084 USA Phone: 847-526-1611, Fax: 847-526-6599, 1-800-323-9601 www.stack-on.com

NOTE: The tools and supplies shown are for illustration purposes only and are not included with the storage products. Dimensions: Height-top to bottom; Width-left to right; Depth-front to back. All specifications subject to change without notice. 052010-1500

HEAVY DUTY steel WORKBENCHes

SO-402 STEEL WORKBENCH WITH BACK WALL
Create your own work center. Built to stand up to everyday use. Features include: 1" thick, wooden work surface. Inset steel end panels which provide added strength. 2 full length steel shelves provide ample storage shelf size is 18" deep x 37-3/8" wide. Steel drawer, with ball bearing slides can hold heavy loads. Drawer can be mounted on the right or left hand side of the bench. Pegboard back wall for frequently used tools. Steel top shelf provides added storage. Assembles in minutes. Assembled Dimensions: 40" W x 20" D x 58" H 102cm x 51cm x 147cm Work surface height is 36" (91.4cm)
SO-402

SO-382B Steel Workbench

Sturdy work area for use in your garage, shop or home: Includes 3/4" MDF top that fastens directly to the steel end panels and top rails for greater stability. Rugged steel I-beam constructed end panels for added strength.
SO-382B

2 large steel shelves help organize your work area. Shelf size 17" deep x 38" wide. Steel pegboard end panels provide hanging storage for additional tools and supplies. Assembles in minutes. 42"W x 20"D x 36"H 107cm x 51cm x 91cm

HEAVY DUTY steel WORKBENCHes

WBG-54BB Pro STEEL WORKBENCH
Features include: 2 Steel drawers with ball bearing drawer glides hold heavy loads. Drawers can be stacked or positioned side by side. 2 full length galvanized steel shelves provide ample storage. Inset steel end panels provide greater strength. End panels are perforated for additional hanging storage. Pegboard back wall is great for frequently used tools. Steel top shelf provides added storage. Includes a large galvanized steel work surface (54"W x 23"D x 1" H). Assembled Dimensions: 54" W x 23" D x 61" H 137cm x 58cm x 155cm Work surface height is 36" (91.4cm)

WBG-54BB

Stack-On Products Company P.O. Box 489, 1360 N. Old Rand Road,Wauconda, IL 60084 USA Phone: 847-526-1611, Fax: 847-526-6599, 1-800-323-9601 www.stack-on.com

NOTE: The tools and supplies shown are for illustration purposes only and are not included with our tool storage products. Dimensions: Height-top to bottom; Width-left to right; Depth-front to back. All specifications subject to change without notice. 052010-1500