Autodesk Inventor User Interface Introduction to the Autodesk Inventor User Interface

This lesson describes the application interface. You are introduced to the different file types (part, assembly, presentation, and drawing) you work with as you create and document your designs, and you examine the common user interface elements and view management tools in these environments. As with all computer applications, the User Interface (UI) is what you use to interact with the program. While the Autodesk Inventor UI shares many common themes and elements with other Microsoft Windows applications, it also has some unique elements and functionalities that may be new to you, even as an experienced CAD user. In the following illustration, the Autodesk Inventor User Interface is shown.

Objectives
After completing this lesson, you will be able to: Describe the multiple environments within Autodesk Inventor. Describe what project files are used for. Describe the types of files Autodesk Inventor creates and the kinds of information they store. Identify the major components of the Autodesk Inventor user interface. Identify the browser and panel bar in the assembly, part, presentation, and drawing environments. Identify and access various types of online help and tutorial resources. Explore the Autodesk Inventor user interface.

Introduction to Multiple Environments

In order to provide the greatest design flexibility and reuse, each part, assembly, and drawing is stored in a separate file. Each part file is a stand-alone entity that can be used in different assembly files and drawing files. When you make a change to the part, that change is evident in each assembly or drawing into which it is referenced. Assembly files can be referenced into other assembly files, into presentation files, and into drawing files. The basic file references that exist in a typical 3D design are represented in the following illustration.

Assemby files: Reference part files and are referenced by drawing files. Part files: Are referenced by assembly files and drawing files. Drawing files: Reference assembly files and part files.

Using Template Files

Template files serve as the basis for all new files you create. By using the template files you control default settings such as units, snap spacing, and default tolerances in your new file. The application offers template files for each type of file. Template files are categorized into two main groups: English for English units (inches and feet), and Metric for metric units (millimeters and meters). The New File dialog box has three tabs: Default, English, and Metric. The Default tab presents templates based on the default unit that you select during installation, while the English and Metric tabs present template files in their respective units.

Part Modeling Environment

In the part modeling environment: You create and edit 3D part models. The interface adjusts automatically to present tools for your current task, for example, tools for sketching or tools to create 3D features.

The following illustration shows the user interface in the part modeling environment.

Assembly Modeling Environment

In the assembly modeling environment: You build and edit 3D assembly models. The components displayed in the system are references to external parts and subassemblies. You use assembly specific tools to position and build relationships between components. A common set of viewing tools is available. The following illustration shows the user interface in the assembly modeling environment.

Presentation Environment
In the presentation environment: You create exploded assembly views. You can record an animation of an exploded view to help document your assembly. The presentation file references an existing assembly. A common set of viewing tools is available. The following illustration shows the user interface in the presentation environment.

Drawing Environment
In the drawing environment: You create 2D drawings of parts and assemblies. A drawing file references one or more parts, assemblies, or presentation files. Changes to the part or assembly model update the associated drawing views and annotations. The following illustration shows the user interface in the drawing environment.

Introduction to Project Files

As you create designs in Autodesk Inventor, file dependencies are created between files of different types. For example, when you create a 3D assembly, a file dependency between the assembly and its part models are created. As your designs grow in complexity, these dependencies can become more complicated. Autodesk Inventor utilizes project files to locate the required files as they are needed. As a result, when you open that 3D assembly, by using the information contained in the Project file, Autodesk Inventor can locate the 3D part files and display them properly. In the context of an introduction to the Autodesk Inventor User Interface, all that is important to realize is that you must have an active project before you create any files. This is why the Project File is listed in the New File dialog box. Autodesk Inventor installs several sample project files, but the Default project is initially active.

Introduction to Inventor File Types

To maximize performance, Autodesk Inventor uses different file types for each type of file. Assembly files are stored in a different type of file than the parts that are used to create them. 2D drawing information can be stored in either the IDW file type that is unique to Autodesk Inventor, or the DWG format that is native to AutoCAD and is an accepted industry standard. In the following illustration, the New File dialog box illustrates the different types of files you can create with Autodesk Inventor.

Part Files
Part files (*.ipt) represent the foundation of all designs using Autodesk Inventor. You use the part file to describe the individual parts that make up an assembly.

Assembly Files
Assembly (*.iam) files consist of multiple part files assembled in a single file to represent your assembly. You use assembly constraints to constrain all the parts to each other. The assembly file contains references to all of its component files.

Presentation Files
You use presentation files (*.ipn) to create exploded views of the assembly. It is also possible to animate the exploded views to simulate how the assembly should be put together or taken apart.

Drawing Files
You use drawing files (*.idw) to create the necessary 2D documentation of your design. Drawing files include dimensions, annotations, and views required for manufacturing. When you use a drawing file to create 2D views of an existing 3D model, the views are associative to the 3D model, and changes in model geometry are reflected in the drawing automatically. You can also use drawing files to create simple 2D drawings in much the same way that you use other 2D drawing programs.

Inventor drawing files can also be stored in the standard DWG format. If you use this format for your 2D drawings, they can be opened and saved in AutoCAD. This is a very useful option for users who must share their design data with others who use AutoCAD.

Menus and Toolbars

All environments share a common layout for menus and a single toolbar across the top of the application window. Each environment displays menu items and tools specific to that environment. As you change tasks within a single environment, menus and the toolbar adjust to present the appropriate tools. The following illustration shows the major components of the Autodesk Inventor user interface. Menus and toolbars are displayed at the top of the application window.

1. Menu 2. Toolbar 3. ViewCube 4. Panel bar 5. Browser 6. 3D Indicator 7. Graphics window

Menu Structure
Autodesk Inventor uses the standard menu structure common in all Microsoft Windows applications. The menu structure is context-sensitive based on the environment and mode you are using. As you are learning the application more thoroughly, you should take the time to familiarize yourself with the different options displayed on the menu while working in different environments. The following illustration shows the Insert menu in the assembly modeling environment.

The following illustration shows the Insert menu in the part modeling environment.

The following illustration shows the Insert menu in the drawing environment.

Toolbars
By default, a single Inventor Standard toolbar is displayed in all environments. When you change between environments the toolbar updates to present valid tools for the environment. The toolbar contains tools for file handling, settings, view manipulation, and model or document appearance.

Standard Toolbar
A section of the Inventor Standard toolbar is displayed in the following illustration. It is organized into groups based on functionality. This area of the toolbar displays tools for standard file and modeling operations.

1. Standard file management tools 2. Undo and redo 3. Selection filters 4. Environment navigation 5. Update document

Introduction to Context-Sensitive Tools

As you switch between environments or between tasks in a single environment, Autodesk Inventor displays the appropriate tools and information for the current task. The panel bar automatically presents tools for the current task, and the browser displays information on the active environment.

1.

2.

The panel bar is your primary interface for accessing the tools available while you design. The context-sensitive design presents the relevant tools based on the current context of your design session. For example, when you switch from assembly modeling to part modeling, the panel bar switches automatically to display the correct tools for the context where you work. The browser is one of the main interface components. It is context-sensitive with the environment you use. For example, when you work on an assembly you use the browser to present information specific to the assembly environment. While you use the part modeling environment, the browser displays information that is relevant to part modeling.

Part Modeling Panel Bar

When you are in the part modeling environment, the Part Features panel bar is displayed while you create and edit part models. You use these tools to create parametric features on the part.

2D Sketch Panel Bar

You use the 2D Sketch Panel in the modeling environment to create 2D parametric sketches, dimensions, and constraints. You use the same set of tools on the Assembly Panel when creating a sketch in the assembly environment.

Part Modeling Browser

The browser displays all features you use to create the part. The features are listed in the order in which they are created. The browser also displays the Origin folder at the top of the list which contains the default X, Y, and Z planes, axes, and center point.

Assembly Modeling Environment

When you are in the assembly modeling environment, the browser displays all the parts you use in the assembly. It also lists the Origin folder containing the default X, Y, and Z planes, axes, and center point of the assembly. If applied, nested under each part, you see the assembly constraints. If you select an assembly constraint, an edit box is displayed at the bottom of the browser, enabling you to edit the offset or angle value for the constraint.

Tip

In the assembly environment, you can use the Modeling View option in the Assembly View drop-down list to display the part features nested under the parts instead of the assembly constraints. This is useful when performing part modeling functions in the context of the assembly.

In the following illustration, the Assembly Panel is shown in the default Learning mode. The tool icons, names, and keyboard shortcuts are displayed in Learning mode.

You can also access the Icon Only mode by right-clicking anywhere on the panel bar and clearing the Display Text with Icons check box.
Tip

Design Accelerator
Selecting Design Accelerator from the Assembly Panel drop-down list switches the panel bar to display the Design Accelerator tools. You use the drop-down list below Design Accelerator to set the standard that is used by the tool.

Presentation Panel
When you are in the presentation environment, you use the Presentation Panel to create presentation views and tweaks, and to animate geometry in the presentation environment.

Presentation Browser
The browser displays the presentation views you create followed by the tweaks you use for the explosion. When you expand each tweak, you see the parts included in that tweak. You can also switch the browser mode from Tweak View to Sequence View or Assembly View.

Drawing Environment
In the drawing environment, the browser displays the Drawing Resources folder containing sheet formats, borders, title blocks, and sketched symbols. It also displays each sheet in the drawing along with the views you create for each.

You use the Drawing Views Panel in the drawing environment to create drawing views on the sheet.

You use the Drawing Annotation Panel in the drawing environment to add reference dimensions and other annotation objects.

Keyboard Shortcuts
On the panel bar and menus, you can use keyboard shortcuts to access tools. For example, you can enter P for Place Component, or N for Create Component. Entering the keyboard shortcut is the same as clicking the tool on the panel bar or menu.

Access Shortcut Keys List

You can access a complete list of the default shortcut keys from the Help menu.
Note

Click Help menu > Shortcut/Alias Quick Reference

Condensed Panel Bar

As you become more familiar with the tools in each environment, you can condense the panel bar by clearing the check mark on the Display Text with Icons option. To switch, select the panel drop-down menu next to the panel name and click Display Text with Icons. In this mode, tools are displayed with icons only to allow more area for the browser and graphics windows.

Alternative Panel Bar and Browser Positions

In addition to the default positions, you can alter the location of the panel bar or browser by clicking and dragging the horizontal bars near the top of the element, or the title area when the element is floating. Both the panel bar and browser can be placed in a docked position on the left or right side of the screen, or in a floating position anywhere in the graphics window.

Introduction to Online Help and Tutorials

Autodesk Inventor offers several types of online help, tutorial references, and other resources to assist in building your skill level. Standard Help files, context-sensitive how-to presentations, Show Me animations, and tutorials are available.

Setting Your User Type

The initial Help screen enables you to specify the user type that most closely matches your situation. Topics that are most relevant to the user type selected are presented first on the initial help screen. By default, the option to Show Help on startup is enabled. This causes the Inventor Help system to launch each time you start Inventor and create a new file or open an existing file. To access the Inventor Help System, press F1 or click Help menu > Help Topics.

Help for Returning and New Users

Returning and new users can find links to Help information that is most relevant for them.

Help for AutoCAD Users

AutoCAD users can use the Help topics designed specifically for them as they make the transition to Autodesk Inventor.

Shortcut/Alias Quick Reference

The Shortcut/Alias Quick Reference shows all of the default Shortcut/Alias keys along with the command names they execute. Click Help menu > Shortcut/Alias Quick Reference to access the reference.

Show Me Animations
The Show Me animations present topic-specific information in animated presentations. To access the Show Me animations, click Help menu > Help Topics and select the Show Me link. In the Show Me dialog box, navigate to the topic of choice and the animation begins automatically.

Tutorials
There are several tutorials available covering a range of topics from Introduction to Advanced. From the main list of tutorials, select the topic of interest. The tutorials present step-by-step information on performing tasks in Autodesk Inventor. You access these tutorials by clicking Help menu > Learning Tools > Tutorials, or clicking Try It Tutorials on the main Help screen.

In the following illustration, the Working with Tables page of the Parameters tutorial is displayed.

Exercise: Explore the Autodesk Inventor User Interface

In this exercise, you explore the Autodesk Inventor user interface for assemby, part modeling, and drawing environments.

The completed exercise

1. Open Mating Press View.iam. 2. Because this is an assembly file, notice the specific assembly modeling tools on the Assembly Panel. In the browser, notice the appearance of both assemby files (1) and part files (2). When assembly files are referenced in other assemblies, they are commonly referred to as subassemblies.

3. In the browser, expand the Base_Plate:1 subassembly to view its referenced parts (1) and assembly constraints (2).

4. To activate a part in the context of the assembly: In the browser, collapse the Base_Plate:1 subassembly node. Double-click the Top_Component:1 part instance. Notice the change in appearance in the browser, graphics window, and panel bar. In the browser, the area listing non-active components and subassemblies has a grey background. The panel bar changes to display tools specific to part modeling, and in the graphics window, all non-active components become transparent, leaving only the part activated for editing as opaque in color.

5. To return to the assembly, on the Standard toolbar, click Return. Note: You could also double-click the assembly in the browser. 6. To open a part in its own window: In the browser, right-click the

Top_Component:1 part. Click Open. The part opens in a separate window and any changes made to the part are reflected in the assembly. Notice how the part color is different than it appears in the assembly. This occurs because a part can be assigned a different color style in the context of the assembly.

7. To activate the sketch environment: In the browser, expand the Extrusion1 part feature. Double-click Sketch1. The browser background color changes to indicate the active sketch, the part features are rolled-back, and the graphics window displays the sketch geometry.

8. To exit the sketch, click Return on the Standard toolbar. 9. Close the part file and return to the assembly. If you prompted to save changes, click No. 10. To open an Inventor drawing file:

Click File menu > Open. In the Open dialog box select m_MatingPress-Drawing.idw and click Open. The panel bar updates to show drawing related tasks and tools.

11. In the browser, expand the Drawing Resources node and View1: Mating Press View.iam node to reveal the nested resources, views, and assembly references.

12. To explore the Help System resources: Press F1. If you are an experienced AutoCAD user, click the option for Users Transitioning from AutoCAD and explore the Help resources that are tailored for these users. If you are new to Inventor and don't have AutoCAD experience, click the option for Returning / New Inventor Users and explore the Help resources that are tailored for these users. 13. Close the Help windows. 14. Close all files in Inventor and do not save changes.

Summary
In this lesson, you learned about the various components that make up the Autodesk Inventor interface, online Help, and tutorials. Having completed this lesson, you can: Describe the multiple environments within Autodesk Inventor. Describe what project files are used for. Describe the types of files Autodesk Inventor creates and the kinds of information they store. Identify the major components of the Autodesk Inventor user interface. Identify the browser and panel bar in the assembly, part, presentation, and drawing environments. Identify and access various types of online help and tutorial resources. Explore the Autodesk Inventor user interface.