Product Data Sheet

00813-0100-4792, Rev FA March 2005

Rosemount 1495, 1496, and 1497

Rosemount 1495 Orifice Plate, 1496 Flange Union, 1497 Meter Section
Comprehensive offering Easy to use, prove, and troubleshoot The Rosemount 1495 Orifice Plate is approved for custody transfer by AGA and API. Meets ISO and DIN specifications Suitable for most gas, liquid, and steam applications

Rosemount 3095MV with Hookup into a Rosemount 1497 Meter Section with a Rosemount 1495 Orifice Plate

Content
The Rosemount 1495, 1496, and 1497. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2 Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3 Sizing and How to Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 6 Rosemount 1495 Orifice Plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 8 Orifice Plate Dimensional Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 8 Ordering InformationRosemount 1495 Orifice Plate . . . . . . . . . . . . . . . . . . . . . . page 10 Rosemount 1496 Flange Union. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 12 Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 12 Ordering InformationRosemount 1496 Flange Union . . . . . . . . . . . . . . . . . . . . . page 13 Rosemount 1497 Meter Section . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 15 Meter Section Dimensional Drawings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 16 Ordering InformationRosemount 1497 Meter Section . . . . . . . . . . . . . . . . . . . . page 17 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 20 Calculation Data Sheet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 21 Configuration Data Sheet (CDS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 22

www.rosemount.com

Product Data Sheet

Rosemount 1495, 1496, and 1497

00813-0100-4792, Rev FA March 2005

The Rosemount 1495, 1496, and 1497

Rosemount 1495 Orifice Plate The most common primary element in the world with established standards for manufacture and installation Reliable technology measurement due to known historical flow data Easy to use, prove, and troubleshoot Approved for custody transfer by AGA and API Good for most gas, liquid, and steam as well as high temperature and pressure applications Meets AGA, ASME, ISO, and API standards, ensuring precision flow measurement. Available for DIN 19206 Part 1 Rosemount 1496 Flange Union Cost effective flow measurement No on-site flange tap drilling required All hardware for complete assembly is provided, including studs, nuts, jack screws, gaskets, and pipe plugs Meets high pressure and temperatures requirement up to ANSI Class 2500# Meets ANSI B16.36 Flange unions available per DIN 19214 Part 1 Rosemount 1497 Flange Union Meter Section Upstream and downstream piping provided Ease of installation with various piping connections Optional temperature tap is available
FIGURE 1. Orifice Plate

FIGURE 2. Flange Union

FIGURE 3. Meter Section

Shown with 1495 and 1496. Orifice Plate ordered separately

Rosemount DP Flow Solutions

Annubar Flowmeter Series: Rosemount 3051SFA, 3095MFA, 485, and 285
The state-of-the-art, fifth generation Rosemount 485 Annubar combined with the 3051S or 3095MV MultiVariable transmitter creates an accurate, repeatable and dependable insertion-type flowmeter. The Rosemount 285 provides a commercial product offering for your general purpose applications.

Integral Orifice Flowmeter Series: Rosemount 3051SFP, 3095MFP, and 1195

These integral orifice flowmeters eliminate the inaccuracies that become more pronounced in small orifice line installations. The completely assembled, ready to install flowmeters reduce cost and simplify installation.

Compact Orifice Flowmeter Series: Rosemount 3051SFC, 3095MFC, and 405

Compact Orifice Flowmeters can be installed between existing flanges, up to a Class 600 (PN100) rating. In tight fit applications, a conditioning orifice plate version is available, requiring only two diameters of straight run upstream.

Orifice Plate Primary Element Systems: Rosemount 1495 and 1595 Orifice Plates, 1496 Flange Unions and 1497 Meter Sections
A comprehensive offering of orifice plates, flange unions and meter sections that is easy to specify and order. The 1595 Conditioning Orifice provides superior performance in tight fit applications.

Product Data Sheet

00813-0100-4792, Rev FA March 2005

Rosemount 1495, 1496, and 1497 Specification

PERFORMANCE
Rosemount 1497 Meter Section Quality Assurance
Optional Code Welding to ASME Section IX Post Weld Heat treatment Non-Destructive Examination: Hydrostatic, Radiography, and Dye Penetrant

Standard Pipe Schedules TABLE 1. Default Pipe Schedules for 1496 Orifice Flange Unions
Pipe Size(1) 1 (35.4) 1 (38.1) 2 (50.8) 2 (63.5) 3 (76.2) 4 (101.6) 6 (152.4) 8 (203.2) 10 (254) 12 (304.8) 14 (355.6) 16 (406.4) 18(457.2) 20 (508) 24-(609.6) ANSI 150# (WN) Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard ANSI 300# (WN, TH, SO) Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard XS XS XS 40(3) ANSI 600# (WN, RJ) Standard Standard Standard Standard Standard Standard 80(2) 80(2) 80(2) 80(2) 80(2) 80(2) 80(2) 80(2) 80(2) ANSI 900# (WN, RJ) Standard Standard Standard 80(2) 80(2) 80(2) 80(2) 120 120 120 120 120 120 120 120 ANSI 1500# (WN, RJ) 80(2) 160 160 160 160 160 XXS Wall thickness is beyond the available standard pipe schedules ANSI 2500# (WN, RJ) 160 XXS XXS XXS Wall thickness is beyond the available standard pipe schedules

(1) Measurement is in inches (millimeters). (2) Flange Unions are supplied with Schedule 80S if 316/316L SST or 304/304L SST materials are selected. (3) Flange Unions are supplied with Schedule 40S if 316/316L SST or 304/304L SST materials are selected.

TABLE 2. Default Pipe Schedules for 1497 Orifice Meter Runs

Pipe Size(1) 1 (35.4) 1 (38.1) 2 (50.8) 2 (63.5) 3 (76.2) 4 (101.6) 6 (152.4) 8 (203.2) 10 (254) 12 (304.8) 14 (355.6) 16 (406.4) 18(457.2) 20 (508) 24-(609.6) ANSI 150# (WN) Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard ANSI 300# (WN, TH, SO) Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard Standard XS XS XS 40(3) ANSI 600# (WN, RJ) Standard Standard Standard Standard Standard Standard 80(2) 80(2) 80(2) 80(2) 80(2) 80(2) 80(2) 80(2) 80(2) ANSI 900# (WN, RJ) Standard Standard Standard 80(2) 80(2) 80(2) 80(2) 120 120 120 120 120 120 120 120 ANSI 1500# (WN, RJ) 80(2) 160 160 160 160 160 XXS Not Available ANSI 2500# (WN, RJ) 160 XXS XXS XXS Not Available

(1) Measurement is in inches (millimeters). (2) Meter Runs are supplied with Schedule 80S if 316/316L SST or 304/304L SST materials are selected. (3) Meter Runs are supplied with Schedule 40S if 316/316L SST or 304/304L SST materials are selected.

Product Data Sheet

Rosemount 1495, 1496, and 1497

TABLE 3. Dimensions of Pipe Inner Diameter(1)
Nominal Pipe Size 2 (51) 2- (64) 3 (76) 4 (102) 6 (152) 8 (203) 10 (254) 12 (305) 14 (356) 16 (406) 18 (457) 20 (508) 24 (610) Schedule 5S 2.245 (57.02) 2.709 (68.81) 2.224 (56.49) 4.334 (110.08) 6.407 (162.74) 8.407 (213.54) 10.482 (266.24) 12.438 (315.93) 10 2.157 (54.79) 2.635 (66.93) 3.26 (82.80) 4.26 (108.20) 6.357 (161.47) 8.329 (211.56) 10.42 (264.67) 12.39 (314.71) 13.5 (342.90) 15.5 (393.70) 17.5 (444.50) 19.5 (495.30) 23.5 (596.90) 10S 2.157 (54.79) 2.635 (66.93) 3.26 (82.80) 4.26 (108.20) 6.357 (161.47) 8.329 (211.56) 10.42 (264.67) 12.39 (314.71) 13.624 (346.05) 15.624 (396.85) 17.624 (447.65) 19.564 (496.93) 23.5 (596.90) 20 8.125 (206.38) 10.25 (260.35) 12.25 (311.15) 13.376 (339.75) 15.376 (390.55) 17.376 (441.35) 19.25 (488.95) 23.25 (590.55)

00813-0100-4792, Rev FA March 2005

30 8.071 (205) 10.136 (257.45) 12.09 (307.09) 13.25 (336.55) 15.25 (387.35) 17.126 (435.00) 19.0 (482.60) 22.876 (581.05)

40 2.067 (52.501) 2.469 (62.71) 3.068 (77.93) 4.026 (102.26) 6.065 (154.05) 7.981 (202.72) 10.20 (254.51) 11.938 (303.23) 13.124 (333.35) 15.0 (381.0) 16.976 (431.19) 18.814 (477.88) 22.626 (574.70)

Schedule 40S 2 (51) 2- (64) 3 (76) 4 (102) 6 (152) 8 (203) 10 (254) 12 (305) 14 (356) 16 (406) 18 (457) 20 (508) 24 (610) 2.067 (52.501) 2.469 (62.71) 3.068 (77.93) 4.026 (102.26) 6.065 (154.05) 7.981 (202.72) 10.02 (254.51) 12.0 (304.8) Standard 2.067 (52.50) 2.469 (62.71) 3.068 (77.93) 4.026 (102.26) 6.065 (154.05) 7.981 (202.72) 10.20 (259.08) 12.00 (304.80) 13.250 (336.55) 15.250 (387.35) 17.250 (438.15) 19.252 (488.95) 23.250 (590.55) 60 7.813 (198.45) 9.75 (247.65) 11.626 (41.30) 12.814 (325.48) 14.688 (373.08) 16.5 (419.10) 18.376 (466.75) 22.064 (560.43) Schedule 100 2 (51) 2- (64) 3 (76) 4 (102) 6 (152) 8 (203) 10 (254) 12 (305) 14 (356) 16 (406) 18 (457) 20 (508) 24 (610) 7.437 (188.90) 9.314 (236.58) 11.064 (281.03) 12.126 (308.00) 13.938 (354.03) 15.688 (398.27) 17.44 (443.98) 20.938 (531.83) 120 3.624 (92.005) 5.501 (139.73) 7.189 (157.15) 9.064 (230.23) 10.75 (273.05) 11.814 (300.08) 13.564 (344.53) 15.25 (387.35) 17.0 (431.80) 20.376 (517.55) 140 7.001 (177.83) 8.75 (222.25) 10.5 (266.70) 11.5 (37.50) 13.124 (333.35) 14.876 (377.85) 16.5 (410.10) 19.876 (504.85) 160 1.689 (42.9) 2.125 (53.98) 2.624 (66.65) 3.438 (87.33) 5.189 (131.80) 6.813 (173.05) 8.50 (215.90) 10.126 (257.20) 11.188 (284.18) 12.814 (325.48) 14.438 (366.73) 16.064 (408.03) 19.314 (490.58) XXS 1.503 (38.18) 1.771 (44.98) 2.30 (58.42) 3.152 (78.80) 4.897 (124.28) 6.875 (174.63) 80 1.939 (49.25) 2.323 (59.0) 2.90 (73.66) 3.826 (97.18) 5.761 (146.33) 7.625 (193.68) 9.564 (242.94) 11.376 (288.95) 12.50 (317.50) 14.314 (363.58) 16.126 (409.60) 17.938 (455.63) 21.564 (547.73) 80S 1.939 (49.25) 2.323 (59.0) 2.90 (73.66) 3.826 (97.18) 5.761 (146.33) 7.625 (193.68) 9.75 (247.65) 11.75 (298.45) XS 1.939 (49.25) 2.323 (59.0) 2.90 (73.66) 3.826 (97.18) 5.761 (146.33) 7.625 (193.68) 9.75 (247.65) 11.75 (298.45) 13.0 (330.20) 15.0 (381.0) 17.0 (425.0) 19.0 (482.60) 23.0 (584.20)

(1) Measurement is in inches (millimeters).

Product Data Sheet

00813-0100-4792, Rev FA March 2005

Rosemount 1495, 1496, and 1497

Flange Mounting Hardware
Studs: ASTM A193 Grade B7M Nuts: ASTM A194 Gr 2H Jackscrews: ASTM A307 Gaskets: Non-asbestos ring type, Durlon 8500 Green or equivalent Pipe Plugs: Match flange material NOTE: Stainless Steel bolting is available as an option.

FUNCTIONAL
Service and Flow Range
Liquid, gas or vapor turbulent flow, for pipe Reynolds Numbers greater than 2,000.

Pipe Sizes
2-in. to 24-in. (50 mm to 600 mm). Contact Emerson Process Management for pipe sizes less than 2-in. (50 mm) or greater than 24-in. (600 mm).

Rosemount 1497 Meter Section Pipe Length

(D is the inside diameter of the pipe) Upstream 10D Downstream 5D (standard) 8D (if temperature tap is selected) Custom Contact Rosemount for more information

Meter Sections
Pipe: Carbon Steel ASTM A106 Grade B; Stainless Steel ASTM A312; Hastelloy ASTM B619 / B622, or Monel ASTM B165 Flanges (ANSI B16.5): Carbon Steel ASTM A105 / A350; Stainless Steel ASTM A182; Hastelloy ASTM B564/575, or Monel 400 ASTM B564/127 See Standard Pipe Schedules and Table 3 on page 4.

Operating Limits
Temperature Range: 320 to 1200 F (196 to 649 C) 320 to 800 F (196 to 427 C) and differential pressure up to 800 inH20 800 to 1200 F (427 to 649 C) and differential pressure up to 400 inH20

Orifice Bore Sizes

Standard bore sizes are in 1/8-in. (3.2 mm) increments from -in. (12.7 mm) to 4-in. (101.6 mm) and in 1/4-in. (6.3 mm) increments from 41/4 to 6-in. (107.95 mm to 152.4 mm). If required, Rosemount Inc. can determine the orifice bore. Basic flow data is required at the time of order, see Calculation Data Sheet . Bore tolerances are within AGA and ASME specifications. Pressure tap connections are -in. (12.7 mm) NPT and 180 apart as standard. The tap hole diameter is -in. (6.35 mm) for 2-in. (51 mm) size, 3/8-in. (9.6 mm) for 2 -in. (63.5 mm) size and 3-in. (76.2 mm), and -in. (12.7 mm) for 4-in. (101.6 mm) and larger sizes. Available options allow the user to have the Rosemount 1495 sized for specific operating conditions. The Orifice Plate Dimensional Drawings on page 8 specifies the physical parameters of the orifice from a detailed sizing calculation.

Maximum Working Pressure

Flange rating per ANSI B16.5.

PHYSICAL
Materials of Construction
Orifice Plate
304/304L or 316/316L Stainless Steel ASTM A240; DIN 1.4571 (316Ti SST); Hastelloy C-276 ASTM B575; or Monel 400 ASTM B127.

Flange Unions
Orifice Flanges (ANSI B16.36): Carbon Steel ASTM A105 / A350; Stainless Steel ASTM A182; Hastelloy ASTM B564/575; or Monel 400 ASTM B564/127; DIN 1.4571 (316Ti SST); DIN 1.0460 (carbon steel)

Product Data Sheet

Rosemount 1495, 1496, and 1497 Sizing and How to Order

00813-0100-4792, Rev FA March 2005

When making a selection, move from left to right, selecting an option in Column 1 and/or either Column 2 or Column 3. Column 1
Orifice Paddle Type 1495 PC Paddle, square edged, concentric

Column 2
Flange Union 1496 WN Raised Face (RF) Weld Neck (for use with paddle type orifice plates) Meter Section

Column 3

Paddle Type

1497 WN Raised Face (RF) Weld Neck (for use with paddle type orifice plates)

1495 PG Paddle, square edged, concentric, spiral finish

1496 SO / TH Raised Face (RF) Slip On / Threaded (for use with paddle type orifice plates)

Orifice Universal Type 1495 UC Universal, square edged, concentric

Flange Union 1496 RJ Ring Type Joint (RTJ) Weld Neck (for use with universal orifice plates with plate holder)

Meter Section 1497 RJ Ring Type Joint (RTJ) Weld Neck (for use with universal orifice plates with plate holder)

Universal Type

Continued on next page

Product Data Sheet

00813-0100-4792, Rev FA March 2005

Rosemount 1495, 1496, and 1497

Column 2
Flange Union

Column 1
Determine Bore Diameter: Choose Flange Rating: ANSI Class 300#, 600#, 900#, 1500#, or 2500# DIN flange ratings: PN10, PN16, PN25, PN40, PN63, PN100 Material: SST 316L or 304L DIN 1.4571 (316Ti SST) Monel Hastelloy

Column 3
Meter Section

ANSI Class 300#, 600#, 900#, 1500#, or 2500# DIN flange ratings: PN10, PN16, PN25, PN40, PN63, PN100

ANSI Class 300#, 600#, 900#, 1500#, or 2500#

A105 DIN 1.0460 (CS) SST 316L or 304L DIN 1.4571 (316Ti SST) Monel Hastelloy

A105 SST 316L or 304L Monel Hastelloy

Choose Line Size: 2 to 24-in. (50 to 600 mm) Contact Emerson Process Management for lines over 24-in. (600 mm) Choose Plate Thickness: Default is 0.125-in. (3.2 mm) for 2 to 6-in (50 to 150 mm) line size Default is 0.250-in. (6.35 mm) for 8 to 14-in (200 to 350 mm) line size Default is 0.375-in. (9.53) for 16 to 20-in. (400 to 500 mm) Default is 0.500-in. (12.7 mm) for 24-in (600 mm) line size Contact Emerson Process Management for lines over 24-in. (600 mm). Refer to Instrument Toolkit for orifice plate sizing. Or, Rosemount Inc. will calculate the bore diameter by specifying option code BC in the 1495 ordering table. Include all of the flowing conditions and pipe information for the application on the CDS. See the Calculation Data Sheet for a detailed sizing calculation.

2 to 24-in. (50 to 600 mm) Contact Emerson Process Management for lines over 24-in. (600 mm)

2 to 24-in. (50 to 600 mm) Contact Emerson Process Management for lines less than 2-in. (51 mm) or greater than 24-in. (600 mm) Choose Tap Location: Flange taps are standard. However, the radius of the pipe may also be selected. Flange Taps/Pipe Taps (21/2 Dx8D)/Radius taps (D & D/2) are available

Choose Piping Connection: Beveled Threaded Flanged

CONFIGURATION
Standard configuration is with a square-edged concentric bore in both paddle and universal type plates. Also available with a spiral finish. Final inspection reports illustrating plate thickness, concentricity, outside dimensions, inside dimensions, roundness, and flatness are available. Bore calculations are available if the Configuration Data Sheet (CDS) is completed and Option BC is selected. Line sizes larger than 24-in. (609.6 mm) are available. Contact Rosemount.

Product Data Sheet

Rosemount 1495, 1496, and 1497 Rosemount 1495 Orifice Plate

ORIFICE PLATE DIMENSIONAL DRAWINGS 1495PC Paddle Type Orifice Plate
(DIN, Paddle, Square edged, Concentric)

00813-0100-4792, Rev FA March 2005

Diameter

Paddle Length

Paddle Width

TABLE 4. Orifice Plate Dimensions(1)

DN DN 50 DN 65 DN 80 DN 100 DN 125 DN 150 DN 200 DN 250 DN 300 DN 350 DN 400 DN 450 DN 500 Diameter (max) by flange rating PN 10 4.21 (107) 5 (127) 5.6 (142) 6.38 (162) 7.56 (192) 8.58 (218) 10.74 (273) 12.91 (328) 14.88 (378) 17.24 (438) 19.25 (489) 21.22 (539) 23.39 (594) PN 16 4.21 (107) 5 (127) 5.6 (142) 6.38 (162) 7.56 (192) 8.58 (218) 10.74 (273) 12.95 (329) 15.11 (384) 17.48 (444) 19.49 (495) 21.85 (555) 24.29 (617) PN 25 4.21 (107) 5 (127) 5.6 (142) 6.61 (168) 7.64 (194) 8.82 (224) 11.18 (284) 13.39 (340) 15.75 (400) 17.99 (457) 20.24 (514) 22.24 (565) 24.57 (624) PN 40 4.21 (107) 5 (127) 5.6 (142) 6.61 (168) 7.63 (194) 8.82 (224) 11.42 (290) 13.86 (352) 16.42 (417) 18.66 (474) 21.49 (546) 22.48 (571) 24.72 (628) PN 63/64 4.45 (113) 5.43 (138) 5.82 (148) 6.85 (174) 8.27 (210) 9.72 (247) 12.17 (309) 14.33 (364) 16.69 (424) 19.13 (486) 21.38 (543) Not Applicable 25.87 (657) PN 100 4.69 (119) 5.67 (144) 6.06 (154) 7.09 (180) 8.54 (217) 10.12 (257) 12.76 (324) 15.39 (391) 18.03 (458) 20.16 (512) 22.52 (572) Not Applicable 27.72 (704) Handle Dimensions 4.72 (120) 4.72 (120) 4.72 (120) 5.51 (140) 5.51 (140) 5.51 (140) 5.51 (140) 5.51 (140) 5.51 (140) 5.51 (140) 5.51 (140) 5.51 (140) 6.30 (160)

(1) Measurement is in inches (millimeters)

Product Data Sheet

00813-0100-4792, Rev FA March 2005

Rosemount 1495, 1496, and 1497

1495PG Orifice Paddle Type
(Paddle, Square edged, Concentric, Spiral finish) Diameter Paddle Length

1495PC Orifice Paddle Type

(Paddle, Square edged, Concentric) Diameter Paddle Length

Paddle Width

Paddle Width

Line Size 2-in. 21/2-in. 3-in. 4-in. 6-in. 8-in. 10-in. 12-in. 14-in. 16-in. 18-in. 20-in. 24-in.

Diameter for Paddle Type 150# 4.125-in. (104.78 mm) 4.875-in. (123.82mm) 5.375-in. ( 136.53 mm) 6.875-in. (174.63 mm) 8.750-in. (222.25 mm) 11.000-in. (279.4 mm) 3.375-in. (85.73 mm) 16.125-in. (409.58 mm) 17.750-in. (450.85 mm) 20.250-in. (514.35 mm) 21.500-in. (546.1 mm) 23.750-in. (603.25 mm) 28.125-in. (714.375 mm) 300# 4.375-in. (111.13 mm) 5.125-in. (130.18 mm) 5.875-in. (149.23 mm) 7.125-in. (180.98 mm) 9.875-in. (250.83 mm) 12.125-in. (307.98 mm) 14.250-in. (361.95 mm) 16.625-in. (422.26 mm) 19.125-in. (485.78 mm) 21.250-in. (539.75 mm) 23.375-in. (593.725 mm) 25.625-in. (650.875 mm) 30.375-in. (771.525 mm) 600# 4.375-in. (111.13 mm) 5.125-in. (130.18 mm) 5.875-in. (149.23 mm) 7.625-in. (266.7 mm) 10.500-in. (266.7 mm) 12.625-in. (320.675 mm) 15.750-in. (400.05 mm) 18.000-in. (457.2 mm) 13.375-in. (339.725 mm) 22.250-in. (565.15 mm) 24.000-in. (609.6 mm) 26.750-in. (679.45 mm) 31.000-in. (787.4 mm) 900# 5.625-in. (142.875 mm) 6.500-in. (165.1 mm) 6.625-in. (168.275 mm) 8.125-in. (206.375 mm) 11.375-in. (288.925 mm) 14.125-in. (358.775 mm) 17.125-in. (434.975 mm) 19.625-in. (498.475 mm) 20.500-in. (520.7 mm) 22.625-in. (574.675 mm) 25.000-in. (635.00 mm) 27.375-in. (695.325 mm) 32.875-in. (835.025 mm) 1500# 5.625-in. (142.875 mm) 6.500-in. (165.1 mm) 6.875-in. (174.625 mm) 8.250-in. (209.55 mm) 11.125-in. (282.575 mm) 13.875-in. (352.425 mm) 17.125-in. (434.975 mm) 20.500-in. (520.7 mm) 22.750-in. (577.85 mm) 25.250-in. (641.35 mm) 27.625-in. (701.675 mm) 29.625-in. (752.475 mm) 35.500-in. (901.7 mm) 2500# 5.750-in. (146.05 mm) 6.625-in. (168.275 mm) 7.750-in. (196.85 mm) 9.250-in. (234.95 mm) 12.500-in. (317.5 mm) 15.250-in. (387.35 mm) 18.750-in. (476.25 mm) 21.625-in. (549.275 mm)

Paddle Length 4-in. (101.6 mm) 4-in. (101.6 mm) 4-in. (101.6 mm) 4-in. (101.6 mm) 5-in. (127 mm) 5-in. (127 mm) 6-in. (152.4 mm) 6-in. (152.4 mm) 6-in. (152.4 mm) 6-in. (152.4 mm) 6-in. (152.4 mm) 6-in. (152.4 mm) 6-in. (152.4 mm)

Paddle Width 1-in. (25.4 mm) 1-in. (25.4 mm 11/4-in. (31.75 mm) 11/4-in. (31.75 mm) 11/2-in. (38.1 mm) 11/2-in. (38.1 mm 11/2-in. (38.1 mm 11/2-in. (38.1 mm 11/2-in. (38.1 mm 11/2-in. (38.1 mm 11/2-in. (38.1 mm 11/2-in. (38.1 mm 11/2-in. (38.1 mm

1495UC Orifice Universal Type

(Universal, Square edged, Concentric Diameter
Line Size 2-in. 21/2-in. 3-in. 4-in. 6-in. 8-in. 10-in. 12-in. 14-in. 16-in. 18-in. 20-in. 24-in. Diameter for Universal Type 2.437-in. (61.8998 mm) 2.812-in. (71.4248 mm) 3.437-in. (87.2998 mm) 4.406-in. (111.912 mm) 6.437-in. (163.5 mm) 8.437-in. (214.3 mm) 10.687-in. (271.45 mm) 12.593-in. (319.862 mm) 14.000-in. (355.6 mm) 16.000-in. (406.4 mm) 18.000-in. (457.2 mm) 20.000-in. (508 mm) 24.000-in. (609.6 mm)

Product Data Sheet

Rosemount 1495, 1496, and 1497

ORDERING INFORMATIONROSEMOUNT 1495 ORIFICE PLATE
TABLE 5. Rosemount 1495 Orifice Plate Ordering Table
Model 1495 Code PC PG UC Code 020 025 030 040 060 080 100 120 140 160 180 200 240 Code A3 A6 A9 AF AT D1 D2 D3 D4 D5 D6 R3 R6 R9 RF RT Code S T L H M Product Description Orifice Plate Primary Orifice Plate Type Paddle, Concentric Paddle, Concentric, Spiral finish (only available up to 12-in (305 mm) line size) Universal, Concentric Line Size 2-in. (50 mm) 2-in. (64 mm) 3-in. (80 mm) 4-in. (100 mm) 6-in. (150 mm) 8-in. (200 mm) 10-in. (250 mm) 12-in. (300 mm) 14-in. (350 mm) 16-in. (400 mm) 18-in. (450 mm) 20-in. (500 mm) 24-in. (600 mm) Flange Rating Flange ANSI Class 300 Raised Face Flange ANSI Class 600 Raised Face Flange ANSI Class 900 Raised Face Flange ANSI Class 1500 Raised Face Flange ANSI Class 2500 Raised Face Flange DIN PN10 (only available with Orifice Plate Type code PC) Flange DIN PN16 (only available with Orifice Plate Type code PC) Flange DIN PN25 (only available with Orifice Plate Type code PC) Flange DIN PN40 (only available with Orifice Plate Type code PC) Flange DIN PN63(1) (only available with Orifice Plate Type code PC) Flange DIN PN100 (only available with Orifice Plate Type code PC)

00813-0100-4792, Rev FA March 2005

Flange ANSI Class 300 Ring Joint (only available with Orifice Plate Type code UC and requires Plate Holder code PH) Flange ANSI Class 600 Ring Joint (only available with Orifice Plate Type code UC and requires Plate Holder code PH) Flange ANSI Class 900 Ring Joint (only available with Orifice Plate Type code UC and requires Plate Holder code PH) Flange ANSI Class 1500 Ring Joint (only available with Orifice Plate Type code UC and requires Plate Holder code PH) Flange ANSI Class 2500 Ring Joint (only available with Orifice Plate Type code UC and requires Plate Holder code PH) Orifice Plate Material Type 316/316L Stainless Steel DIN 1.4571 (316Ti Stainless Steel) (only available with Flange Rating codes D1, D2, D3, D4, D5, D6) 304/304L Stainless Steel (not available with Flange Rating codes D1, D2, D3, D4, D5, D6) Hastelloy C-276 (Hastelloy C4 is supplied for Flange Rating codes D1, D2, D3, D4, D5, D6) Monel

10

Product Data Sheet

00813-0100-4792, Rev FA March 2005

Rosemount 1495, 1496, and 1497

TABLE 5. Rosemount 1495 Orifice Plate Ordering Table

Code A B C D E(2) Code XXXXX Code BC DV(3) Plate Holder PH(4) TC(3) TE(3) TS(3) TQ(3) P2 QC1 QC7 Q8 J5(5) J1 Plate Holder for RTJ Flanges Conical Entrance Bore Eccentric Bore Segmental Bore Quandrant Edged Bore Cleaning for special processes Visual and dimensional inspection with certificate Inspection and performance certificate Material certificate per ISO 10474 3.1.B and EN 10204 3.1.B NACE MR-0175 / ISO 15156 Canadian Registration 1495 PC 040 A3 S A 02125 Alternative Plate Holder Plate Thickness 0.125-in. (3.2 mm) default for line size 2 to 6-in. (50 to 150 mm) 0.250-in. (6.35 mm) default for line size 8 to 14-in. (200 to 350 mm) 0.375-in. (9.53 mm) default for line size 16 to 20-in. (200 to 350 mm) 0.500-in. (12.7 mm) default for 24-in. (600 mm) line size Plate Thickness per DIN 19206 Bore Bore (XXXXX = XX.XXX) Options Bore Calculation Drain / Vent Hole

Bore Calculations Drain / Vent Hole

Special Cleaning Special Inspection

Material Traceability Certification Code Conformance Country Certification Typical Model Number:
(1) Previously PN64. (2) Standard Plate Thickness: DN50 = 2.5 mm DN65 = 3 mm DN80 450 = 4 mm DN 500 = 6 mm (3) This option requires that the Pipe I.D. be specified in the order. (4) Integral Plate Holder (material matches plate material) for line sizes to 3-in., requires minimum 1/4-in plate thickness. Screw Type Plate Holder in 304SS for line sizes 4-in. and larger. (5) Materials of Construction comply with recommendations per NACE MR0175/ISO 15156 for sour oil field production environments. Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining environments.

11

Product Data Sheet

Rosemount 1495, 1496, and 1497 Rosemount 1496 Flange Union

CONFIGURATION
Standard flange styles are raised face (RF) weld neck or RF slip on (ANSI Class 300 only) for paddle type orifice plates, and ring type joint (RTJ) weld neck for universal type plates with plate holders. All flange unions are supplied with studs, nuts, jackscrews, gaskets, and pipe plugs. Table 1 and 2 lists standard pipe schedules. Meets ANSI B16.36 Meets DIN part 19214 part 1 Tap connection provided at 180-degrees apart Socket weld tap connections can be specified in lieu of standard NPT High temperature flange gaskets for temperatures greater than 500 F (260 F) Stainless Steel flange bolting per ASTM A193 Grade B8M/A194 Grade 8M ANSI threaded flanges for connection to threaded process piping (21/2-in. (63.5 mm) piping size maximum

00813-0100-4792, Rev FA March 2005

Flange Union

The following options are available.

Shown with 1495. Orifice Plate ordered separately

12

Product Data Sheet

00813-0100-4792, Rev FA March 2005

Rosemount 1495, 1496, and 1497

ORDERING INFORMATIONROSEMOUNT 1496 FLANGE UNION

TABLE 6. Rosemount 1496 Orifice Flange Union Ordering Table
Model 1496 Code WN RJ TH SO DN Code 020 025 030 040 060 080 100 120 140 160 180 200 240 Code A3 A6 A9 AF AT D1 D2 D3 D4 D5 D6 R3 R6 R9 RF RT Code C S T L H M Product Description Orifice Flange Union Flange Union Type Raised Face, Weld Neck Ring Joint, Weld Neck Raised Face, Threaded (only available with Flange Rating code A3 and line sizes to 3-in.) Raised Face, Slip-On (only available with Flange Rating code A3) Raised Face, Weld Neck, DIN 19214 Part 1 (only available with Flange Rating codes D1, D2, D3, D4, D5, D6) Line Size 2-in. (50 mm) 2-in. (64 mm) 3-in. (80 mm) 4-in. (100 mm) 6-in. (150 mm) 8-in. (200 mm) 10-in. (250 mm) 12-in. (300 mm) 14-in. (350 mm) 16-in. (400 mm) 18-in. (450 mm) 20-in. (500 mm) 24-in. (600 mm) Flange Rating Flange ANSI Class 300 Flange ANSI Class 600 Flange ANSI Class 900 Flange ANSI Class 1500 Flange ANSI Class 2500 Flange DIN PN10 (only available with Flange Union Type code DN and line sizes 2-in (DN50) through 20-in. (DN500) Flange DIN PN16 (only available with Flange Union Type code DN and line sizes 2-in (DN50) through 20-in. (DN500) Flange DIN PN25 (only available with Flange Union Type code DN and line sizes 2-in (DN50) through 20-in. (DN500) Flange DIN PN40 (only available with Flange Union Type code DN and line sizes 2-in (DN50) through 20-in. (DN500) Flange DIN PN63(1)(only available with Flange Union Type code DN and line sizes 2-in (DN50) through 20-in. (DN500) Flange DIN PN100 (only available with Flange Union Type code DN and line sizes 2-in (DN50) through 20-in. (DN500) Ring-Type Joint (RTJ) Class 300 Ring-Type Joint (RTJ) Class 600 Ring-Type Joint (RTJ) Class 900 Ring-Type Joint (RTJ) Class 1500 Ring-Type Joint (RTJ) Class 2500 Flange Union Material Type Carbon Steel (A105 DIN 1.4060) 316/316L Stainless Steel DIN 1.4571 (316Ti Stainless Steel) (only available with Flange Union Type code DN) 304/304L Stainless Steel (not available with Flange Union Type code DN) Hastelloy C-276 (Hastelloy C4 is supplied for Flange Union Type code DN) Monel

13

Product Data Sheet

Rosemount 1495, 1496, and 1497

TABLE 6. Rosemount 1496 Orifice Flange Union Ordering Table
Code FA(3) FB(3) FC(3) FD(3) FE(3) FF(3) FG(3) FH(3) FI(3) FJ(3) FK(3) FL(3) FM(3) FN(3) FP(3) FQ(3) FR(3) G1 SS ST P2 QC1 Q8 J5(4) J1 J6 Options Schedule 5S Schedule 10 Schedule 10S Schedule 20 Schedule 30 Schedule 40 Schedule 40S Schedule Standard (STD) Schedule 60 Schedule 80 Schedule 80S Schedule Extra Strong (XS) Schedule 100 Schedule 120 Schedule 140 Schedule 160 Schedule Double Extra Strong (XXS) Alternate Pipe Schedule / Wall Thickness(2)

00813-0100-4792, Rev FA March 2005

High Temperature Gaskets High Temperature Gaskets (spiral wound gaskets) (not available with Flange Union Type code DN) 316SS Studs/Nuts Socketweld Pressure Taps (not available with Flange Union Type code DN) Cleaning for special processes Visual and dimensional inspection with certificate Material certificate per ISO 10474 3.1.B and EN 10204 3.1.B NACE MR-0175 / ISO 15156 Canadian Registration Number (not available with Flange Union Type code DN) Conformance to European Pressure Equipment Directive (PED) 97/23/EC 1496 WN 040 A3 S Alternate Bolting Material Alternate Pressure Tap Type Special Cleaning Special Inspection Material Traceability Certification Code Conformance Country Certification

Typical Model Number:

(1) Previously PN64.

(2) Default pipe schedules are listed in Table 1 on page 3 for the 1496 Orifice Flange Unions. (3) These options are not available with flange type DN. These options should only be selected if the required pipe schedule is different from the default pipe schedule, as shown in Table 1 on page 3. Standard wall thickness for DIN weldneck flanges is per ISO EN 1092-1 (2002). Consult the factory if a different wall thickness is required. (4) Materials of Construction comply with recommendations per NACE MR0175/ISO 15156 for sour oil field production environments. Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining environments.

14

Product Data Sheet

00813-0100-4792, Rev FA March 2005

Rosemount 1495, 1496, and 1497 Rosemount 1497 Meter Section

CONFIGURATION
Meter sections are available in the same material selection as the Rosemount 1495 Orifice Plates and 1496 Flange Unions, with either Raised Face (RF) or Ring Type Joint (RTJ) weld neck flange connections. The standard meter section length is 10 pipe diameters upstream, 5 pipe diameters downstream, as shown in Table 8, with a choice of beveled, threaded, or flanged piping connection. Custom lengths available. Contact Rosemount for more information. Piping conditions may require additional straight run, as shown in Table 7. Numerous construction material options are available including 304/316 stainless steel, Hastelloy and Monel. Special materials, such as Inconel 800H, Titanium or Alloy 20, can also be supplied if required. Additional 1/2-in. (12.7 mm) or 1-in. (25.4 mm) NPT threaded (or socket-weld) fittings for auxiliary temperature are also available. Meter section with special assemblies can be supplied. Contact Rosemount for more information. Honed Meter Sections- Contact Rosemount Engineered Assemblies for more information.
Meter Section

Shown with 1495 and 1496. Orifice Plate ordered separately

TABLE 7. Recommended Straight Lengths for Nozzles and Orifice Plates for 0.5% Additional Uncertainty (From ASME MFC-3M1989)
Upstream (Inlet) of the Primary Device Two or more 90 Single 90 bend Two or more 90 bends or tee (flow from bends in the in different one branch only) same plane(1) planes(1) Reducer (2D to D over a length of 1.5D to 3D) Expander (0.5D to D over a length of 1D to 2D) Full bore ball or gate valve fully open Downstream All fittings included in this table

Globe value fully open(2)

0.20 0.25 0.30 0.35 0.40 0.45 0.50 0.55 0.60 .065 0.70 0.75

6 6 6 6 7 7 7 8 9 11 14 18

7 7 8 8 9 9 10 11 13 16 18 21

C 3.5 3.5 3.5 3.5 3.5 4 4 4 4.5 5 5.5 6

C 5 5 5 5 5 5 5 5 5.5 6 6.5 7

17 17 17 18 18 19 20 22 24 27 31 35

C 4.5 4.5 4.5 4.5 4.5 5 5 5.5 6 6.5 7 8

C 5 5 5 5 5 5 5 5.5 6 6.5 7 8

5(3) 5(3) 5(3) 5(3) 5(3) 5(3) 5 5 5 6 7 11

8 8 8 8 8 9 9 10 11 13 15 19

6 6 6 6 10 12 15 18 22 25 25 25

6 6 6 6 6 6 6 7 7 8 10 12

2 2 2.5 2.5 3 3 3 3 3.5 3.5 3.5 4

(1) The insertion of 5D to 10D straight lengths between the two bends is sufficient to make the combined effect the same as the single bends in the left column. (2) These lengths require no additional uncertainty. (3) These lengths require no additional uncertainty, but the uncertainties for shorter lengths are not well enough known to be given in this standard.

15

Product Data Sheet

Rosemount 1495, 1496, and 1497

METER SECTION DIMENSIONAL DRAWINGS

00813-0100-4792, Rev FA March 2005

Threaded Meter Section Welded Meter Section

Downstream Length Upstream Length Optional Temperature Tap Upstream Length Downstream Length Optional Temperature Tap

Flange Union Pressure Taps Pressure Taps

Flange Union

Flanged Meter Section

Downstream Length Upstream Length Optional Temperature Tap

Flange Union Pressure Taps

TABLE 8. Meter Section Lengths(1)

Nominal Size 2-in. (51 mm) 2-in. (64 mm) 3-in. (76 mm) 4-in. (102 mm) 6-in. (152 mm) 8-in. (203 mm) 10-in. (254 mm) 12-in. (305 mm) 14-in. (356 mm) 16-in. (406 mm) 18-in. (457 mm) 20-in. (508 mm) 24-in. (610 mm) Upstream Length 21-in. (533 mm) 26-in. (660 mm) 32-in. (813 mm) 41-in. (1041 mm) 62-in. (1575 mm) 81-in. (2057 mm) 101-in. (2565 mm) 120.0-in. (3048 mm) 134-in. (3404 mm) 153-in. (3886 mm) 173-in. (4394 mm) 194-in. (4928 mm) 230-in. (5842 mm) Downstream Length 11-in. (279 mm) 12.0-in. (305 mm) 16-in. (406 mm) 21-in. (533 mm) 30.0-in. (762 mm) 40-in. (1016 mm) 51-in. (1295 mm) 60.0-in. (1524 mm) 66.0-in. (1676 mm) 77-in. (1959 mm) 87-in. (2209 mm) 96.0-in. (2438 mm) 115-in. (2921 mm) Downstream Lengths (DSL) with Temperature Tap 17-in. (432 mm) 21-in. (533 mm) 24-in. (607 mm) 33-in. (838 mm) 48-in. (1219 mm) 64-in. (1625 mm) 82-in. (2082 mm) 96.0-in. (2438 mm) 106-in. (2692 mm) 123-in. (3124 mm) 138.0-in. (3505 mm) 154-in. (3912 mm) 171-in. (4343 mm)

(1) Standard length. See Table 7 for recommended straight run length.

TABLE 9. Meter Tube Pressure Tap Holes

Meter Tube Nominal Inside Diameter Recommended Nominal Tap Hole Diameter Maximum Nominal Tap Hole Diameter Minimum Nominal Tap Hole Diameter

3 3 1 21/2 to 3 /8-in. (10 mm) /8-in. (10 mm) /4-in. (6 mm) 1 1 1 4 and larger /2-in. (13 mm) /2-in. (13 mm) /4-in. (6 mm) Note: The finished tap hole will be 1/64-in. (0.4 mm) from the selected nominal tap hole diameter along the drilled length of the hole.

16

Product Data Sheet

00813-0100-4792, Rev FA March 2005

Rosemount 1495, 1496, and 1497

ORDERING INFORMATIONROSEMOUNT 1497 METER SECTION

TABLE 10. Rosemount 1497 Orifice Meter Section Ordering Table
Model 1497 Code WN RJ SO Code 020 025 030 040 060 080 100 120 140 160 180 200 240 Code A3 A6 A9 AF AT R3 R6 R9 RF RT Code C S L H M Code F G Code B F G T Product Description Orifice Meter Section Meter Section Type Raised Face, Weld Neck Ring Joint, Weld Neck Raised Face, Slip-On (only available with Flange Rating code A3) Line Size 2-in. (50 mm) 2-in. (64 mm) 3-in. (80 mm) 4-in. (100 mm) 6-in. (150 mm) 8-in. (200 mm) 10-in. (250 mm) 12-in. (300 mm) 14-in. (350 mm) 16-in. (400 mm) 18-in. (450 mm) 20-in. (500 mm) 24-in. (600 mm) Flange Rating Flange ANSI Class 300 Flange ANSI Class 600 Flange ANSI Class 900 Flange ANSI Class 1500 Flange ANSI Class 2500 Ring-Type Joint (RTJ) Class 300 Ring-Type Joint (RTJ) Class 600 Ring-Type Joint (RTJ) Class 900 Ring-Type Joint (RTJ) Class 1500 Ring-Type Joint (RTJ) Class 2500 Meter Section Material Type Carbon Steel 316/316L Stainless Steel 304/304L Stainless Steel Hastelloy C-276 Monel Pressure Tap Location / Type Flanged / 1/2-in. FNPT Flanged / 1/2-in. Sock Tap Meter Section End Connections Beveled (prepared for welding) Flanged (flange rating matches orifice flange rating) Flanged, ANSI Class 150 NPT Male Thread

17

Product Data Sheet

Rosemount 1495, 1496, and 1497

TABLE 10. Rosemount 1497 Orifice Meter Section Ordering Table
Code FA(2) FB(2) FC(2) FD(2) FE(2) FF(2) FG(2) FH(2) FI(2) FJ(2) FK(2) FL(2) FM(2) FN(2) FP(2) FQ(2) FR(2) TO TP TQ TR TS TT TV TW TX PO PP PQ PR PS PT G1 SS P1 V1 V2 QC1 Options Schedule 5S Schedule 10 Schedule 10S Schedule 20 Schedule 30 Schedule 40 Schedule 40S Schedule Standard (STD) Schedule 60 Schedule 80 Schedule 80S Schedule Extra Strong (XS) Schedule 100 Schedule 120 Schedule 140 Schedule 160 Schedule Double Extra Strong (XXS) Temperature Tap, fitting only, 1/2-in. NPT Temperature Tap, fitting only, 1/2-in. SW Temperature Tap, fitting only, 3/4-in. NPT Temperature Tap, fitting only, 3/4-in. SW Temperature Tap, fitting only, 1-in. SW Temperature Tap, fitting only, 1-in. NPT Temperature Tap, fitting only, 1-in. flanged (rating matches orifice flange rating) Temperature Tap, fitting only, 11/2-in. flanged (rating matches orifice flange rating) Temperature Tap, fitting only, 2-in. flanged (rating matches orifice flange rating) Pressure Tap, fitting only, 1/2-in. NPT Pressure Tap, fitting only, 1/2-in. SW Pressure Tap, fitting only, 3/4-in. NPT Pressure Tap, fitting only, 3/4-in. SW Pressure Tap, fitting only, 1-in. SW Pressure Tap, fitting only, 1-in. NPT High Temperature Gaskets (spiral wound gaskets) 316 Stainless Steel Studs/Nuts Hydrostatic Test (1.5 x design pressure for 10 minutes) Dye Penetrant Examination Radiographic Examination Visual and dimensional inspection with certificate Alternate Pipe Schedule / Wall Thickness(1)

00813-0100-4792, Rev FA March 2005

Temperature Taps

Additional Pressure Taps

High Temperature Gaskets Alternate Bolting Material Hydrostatic Test Dye Penetrant Examination Radiographic Examination Special Inspection

18

Product Data Sheet

00813-0100-4792, Rev FA March 2005

Rosemount 1495, 1496, and 1497

TABLE 10. Rosemount 1497 Orifice Meter Section Ordering Table

Material Traceability Certification Q8 J2 J3 J4 J5(3) J1 J6 Material certificate per ISO 10474 3.1.B and EN 10204 3.1.B ANSI B31.1 ANSI B31.3 ANSI B31.8 NACE MR-0175 / ISO 15156 Canadian Registration Number Conformance to European Pressure Equipment Directive (PED) 97/23/EC 1497 WN 040 A3 C FF Code Conformance

Country Certification

Typical Model Number:

(1) Default pipe schedules are listed on Table 2 on page 3 for the 1497 Orifice Meter Runs. (2) These options should only be selected if the required pipe schedule is different from the default pipe schedule, as shown in Table 2 on page 3. Standard wall thickness for DIN weldneck flanges is per ISO EN 1092-1 (2002). Consult the factory if a different wall thickness is required. (3) Materials of Construction comply with recommendations per NACE MR0175/ISO 15156 for sour oil field production environments. Environmental limits apply to certain materials. Consult latest standard for details. Selected materials also conform to NACE MR0103 for sour refining environments.

19

Product Data Sheet

Rosemount 1495, 1496, and 1497 Accessories

STABILIZED CONNECTORS

00813-0100-4792, Rev FA March 2005

Stabilized Connectors allow the direct connection between the manifold of the transmitter to the orifice flange union as shown in Figure 4.
FIGURE 4. Stabilized Connectors

Specifications
Process Connections
Short connectors -in. NPT threaded Long connectors -in. NPT threaded

Stabilizer Connectors

Body Material
316 SS

Flow

Pressure and Temperature limits

10,000 psi at 200F 8,000 psi at 450F

Long Connectors 4.76 (121)

Short Connectors

Adapter Plate for 3/8-in. and 1/2-in. Thick Plates

2.87 (73)

23/8- 21/2- in. spacing adapter option. Required when using orifice plates over 1/4 -in. thick. Dimensions are in inches (millimeters)

TABLE 11. Stabilized Connectors

Part Numbers 116680830001 116680820001 116680830002 116680820002 116680820003 116680820004 116680830004 116680830005 Description Short Connectors Long Connectors Short Connectors with SST Bolts Long Connectors with SST Bolts Long Connectors with spacing adaptor for Orifice Plates thicker than 1/4-in. Long Connectors with SST Bolts with spacing adaptor for Orifice Plates thicker than 1/4-in. Short Connectors with spacing adaptor for Orifice Plates thicker than 1/4-in. Short Connectors with SST Bolts spacing adaptor for Orifice Plates thicker than 1/4-in. Plate Thickness
1/8-in. 1

and 1/4-in. /8-in. and 1/4-in. 1 /8-in. and 1/4-in. 1/8-in. and 1/4-in. 3 /8-in. and 1/2-in. 3 /8-in. and 1/2-in.
3

/8-in. 3/8-in.

and 1/2-in. and 1/2-in.

NOTE The length of the Stabilized Connectors (4.76-inches vs. 2.87-inches) determines the distance between the Orifice Flange Union and the manifold.
20

Product Data Sheet

00813-0100-4792, Rev FA March 2005

Rosemount 1495, 1496, and 1497 Calculation Data Sheet

This Calculation Data Sheet can be provided. The detailed sizing calculation may be done through the Configuration Data Sheet (CDS) on page 22. ROSEMOUNT INC. 1495 ORIFICE PLATE CALCULATION DATA SHEET
GENERAL DATA
Customer: Project: S. O. No: P. O. No: Calc. Date: Model No: Tag No: Customer Name 2002 Official Calculations Sales Order Number Customer P.O Number 11/21/2001 1495PC080A3SA04625BC Tag Number

PRODUCT DESCRIPTION
Plate Type: Plate Material: Drain/Vent Diameter: Process Connection Square-edge 316 SST None Tap Type: Tap Location: Line Size: Pipe Schedule: Pipe Material: Flange tapping Upstream 8-inch 40 Carbon Steel

INPUT DATA
Fluid Type: Fluid Description: Pipe I.D. Pressure Temperature at Flow: Absolute Viscosity: Isentropic Exponent Compressibility at Flow Density at Flow: Flow Rates Minimum: Normal: Maximum: Full Scale: 6000 8000 10000 10000 lb/hr lb/hr lb/hr lb/hr Steam 7.981 60 307.33 0.014093 1.317455 0.171328 inch psig F cP

Base Pressure Base Temperature

14.6960001 59

psia F

lb/ft3

Base Compressibility Base Density

lb/ft3

CALCULATED DATA (Calculation performed at normal conditions. DP in H2O at 68 F)

Orifice Bore Size: DP at Min. Flow: DP at Normal Flow: DP at Max. Flow: URV (DP at Full Scale): Drain/Vent Corr. Factor: Beta: Discharge Coefficient 4.000 16.379 29.117 45.496 45.496 1 0.50119 0.60366 inch in H2O at 68 F in H2O at 68 F in H2O at 68 F in H2O at 68 F Bore Reynolds Number (Normal): Pipe Reynolds Number (Normal): Gas Expansion Factor: Permanent Pressure Loss: at Normal Flow: at Max Flow: Velocity at Max. Flow: Minimum Accurate Flow: 894278.832 448514.484 0.99538888 21.2294996 33.1710931 46.6687791 2111.34891 in H2O at 68 F in H2O at 68 F ft/sec lb/hr

Notes

Calculation by VLB
This report is provided according to the terms and conditions of the instrument Toolkit End-Use Customer License agreement. Version: 3.0 (Build 91) Printed on: 11/27/01 11:07

21

Product Data Sheet

Rosemount 1495, 1496, and 1497

00813-0100-4792, Rev FA March 2005

Configuration Data Sheet (CDS)

DP FLOW CDS
Complete this form to define a custom flow configuration for DP Flowmeters. Unless specified, the flowmeter will be shipped with the default values identified by the H symbol. For technical assistance in filling out this CDS, call a Rosemount representative. NOTE Any missing information will be processed with the indicated default values.

* = Required Item = Default

Customer Information Customer: Customer Phone: Customer Approval Sign-Off: Calculation Approval Check this box if you require a calculation for approval prior to manufacturing Application and Configuration Data Sheet (Required with Order) Tag: Model No (1) * Select fluid type * Fluid name Flowmeter Information (optional) * Failure Mode Alarm Direction (select one) Software Tag: Descriptor: Message: Contact Name: Customer Fax: Customer PO:

Liquid

Gas

Steam

Alarm High

Alarm Low

___ ___ ___ ___ ___ ___ ___ ___ (8 characters) ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ (16 characters) ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ ___ (32 characters)

Date:

Day __ __ (numeric)

Month __ __ (numeric)

Year __ __ (numeric)

(1) A complete model number is required before Rosemount Inc. can process the order.

For Rosemount Use Only S.O.: CHAMP: LI DATE: ADMIN:

22

Product Data Sheet

00813-0100-4792, Rev FA March 2005

Rosemount 1495, 1496, and 1497

* = Required Item = Default

Primary Element Information

* Select Differential Producer (Select One) 485 Annubar/ 3095MFA Mass ProBar, 3051SFA ProBar Annubar Diamond II + / Mass Probar Long Radius Wall Taps, ASME Long Radius Wall Taps, ISO ISA 1932, ISO
Annubar Orifice 3051SFP, 3095MFP, 1195 405C, 405P, 3051SFC, 3095MFC 1595 Conditioning Orifice 21/2D & 8D Taps, ASME Corner Taps, ASME Corner Taps, ISO D & D/2 Taps, ASME D & D/2 Taps, ISO D & D/2 Taps, ISO 99 Amendment 1 Flange Taps, AGA Flange Taps, ASME Flange Taps, ISO Flange Taps, ISO 99 Amendment 1 Small Bore, Flange Taps, ASME

Venturi Nozzle, ISO Rough Cast/Fabricated Inlet, ASME Round Cast Inlet, ISO Machined Inlet, ASME Machined Inlet, ISO Welded Inlet, ISO Other (All options require a discharge coefficient value) Calibrated Orifice: Flange, Corner, or D & D/2 Taps. Discharge coefficient: __________________ Calibrated Orifice: 21/2 D & 8D Taps Discharge coefficient: __________________ Calibrating Nozzle Discharge coefficient: __________________ Calibrating Venturi Discharge coefficient: __________________ Area Averaging Meter Discharge coefficient: __________________ V-Cone Discharge coefficient: __________________ Diameter (d) ________________

Special Annubar dimension (required if customer supplies mounting hardware). Pipe Information * Orientation / Flow Direction:

inch millimeters

at __________

ODF _____

F C 68 F ODT _____ Horizontal

Vertical Up

Vertical Down

* Line Size / Schedule: ___________________________________ Materials of Construction * Pipe Material * Primary Element Material Operating Conditions 4 mA value Flow Rate Pressure (P) Temperature (T) RTD Mode 0 Minimum *(1) Normal * * *

Body I.D. (D): ___________________________________

Carbon Steel 316 SST

304 SST Hastelloy

316 SST

Hastelloy

Other ________________

Other ___________________ (Please verify material availability)

Maximum * Full Scale:20 mA flow rate (design to P and T) *(2) * Design

*(1) *(1)

*(1) *(1)

Normal Mode (Requires a RTD to be connected. If the RTD is disconnected or fails, the 3095MV output goes to alarm value) Fixed Temperature Mode:
Specify the fixed temperature value _____________________

Backup Mode (Uses the connected RTD for temperature measurement. If the RTD is disconnected or fails, the transmitter uses a fixed temperature value as a backup. This will not cause the mA output to go to alarm value and can potentially cause inaccurate flow measurement.) Fixed temperature value to be used as backup_________________ F C

23

Product Data Sheet

00813-0100-4792, Rev FA March 2005

Rosemount 1495, 1496, and 1497

* = Required Item = Default

Base Conditions

Standard Base Normal Base User Defined:

(P=14.696 psia / 101.325 kPa abs, T= 60 F (15.56 C)) (P=14.696 psia / 101.325 kPa abs, T= 32 F (0 C)) (P=14.73 psia, T= 60F (15.56 C)) Units: ________ T= ________ OR Units = ________ Density at Base: ________________________

Standard Base for Natural Gas (AGA)

P= ________

Compressibility at Base: ________________________

(1) Operating ranges for pressure and temperature are needed for transmitter configuration. (2) Required to verify that the product selection meets design criteria. (1)

TABLE 12. Rosemount Fluids Database

Acetic Acid Acetone Acetonitrile Acetylene Acrylonitrile Air Allyl Alcohol Ammonia Argon Benzene Benzaldehyde Benzyl Alcohol Biphenyl Carbon Dioxide Carbon Monoxide Carbon Tetrachloride Chlorine Chlorotrifluoroethylene Chloroprene Cycloheptane Cyclohexane Cyclopentane Cyclopentene Cyclopropane

Divinyl Ether Ethane Ethanol Ethylamine Ethylbenzene Ethylene Ethylene GlycolEthylene Oxide Fluorene Furan Helium-4 Hydrazine Hydrogen Hydrogen Chloride Hydrogen Cyanide Hydrogen Peroxide Hydrogen Sulfide Isobutane Isobutene Isobutyl benzene Isopentane Isoprene Isopropanol

Methane Methanol Methyl Acrylate Methyl Ethyl Ketone Methyl Vinyl Ether m-Chloronitrobenzene Neon Neopentane Nitric Acid Nitric Oxide Nitrobenzene m-Dichlorobenzene Nitroethane Nitrogen Nitromethane Nitrous Oxide n-Butane n-Butanol n-Butyraldehyde n-Butyronitrile n-Decane n-Dodecane n-Heptadecane n-Heptane

n-Hexane n-Octane n-Pentane Oxygen Pentafluorothane Phenol Propadiene Pyrene Propylene Styrene Sulfer Dioxide Propane Toluene Trichloroethylene Vinyl Acetate Vinyl Chloride Vinyl Cyclohexane Water 1-Butene 1-Decene 1-Decanal 1-Decanol 1-Dodecene 1-Dodecanol

1-Heptanol 1-Heptene 1-Hexene 1-Hexadecanol 1-0ctanol 1-Octene 1-Nonanol 1-Pentadecanol 1-Pentanol 1-Pentene 1-Undecanol 1-Nonanal 1,2,4- Trichlorobenzene 1,1,2- Trichloroethane 1,1,2,2- Tetrafluoroethane 1,2-Butadiene 1,3-Butadiene 1,3,5- Trichlorobenzene 1,4-Dioxane 1,4-Hexadiene 2-Methyl-1-Pentene 2,2-Dimethylbutane

(1) This list is subject to change without notice. Steam per ASME Steam tables. All other fluids per AlChE.

Drawing/Notes

Rosemount, the Rosemount logotype, ProPlate, Mass ProPlate, and Annubar are registered trademarks of Rosemount Inc. MultiVariable (MV) is a trademark of Rosemount Inc. Hastelloy is a registered trademark of Haynes International. Monel and Inconel are registered trademarks of International Nickel Co. All other marks are the property of their respective owners. Emerson Process Management Emerson Process Management Asia Emerson Process Rosemount Inc. Pacific Private Limited Management GmbH & Co. 8200 Market Boulevard Chanhassen, MN USA 55317 1 Pandan Crescent Argelsrieder Feld 3 T (US) (800) 999-9307 Singapore 128461 82234 Wessling T (Intnl) (952) 906-8888 T (65) 6777 8211 Germany F (952) 949-7001 F (65) 6777 0947 T 49 (8153) 9390 [email protected] F 49 (8153) 939172 www.rosemount.com

00813-0100-4792U
2005 Rosemount Inc. All rights reserved.