Scribd
Upload
83 views3 pages

Put WMC

This document appears to be an exam for a wireless and mobile communications course, containing multiple choice and short answer questions. The questions cover topics such as: - Microwave link design and path loss modeling - Multipath fading characteristics and small scale fading types - Diversity techniques in wireless communications - Adaptive equalization algorithms and factors affecting performance - Spread spectrum techniques like DS-SS and performance metrics - Factors affecting FDMA schemes and example calculations - Cellular system design considerations like coverage, capacity, and handoff - Channel assignment strategies and capacity improvement through cell splitting - Standards and technologies like GSM, IS-95, UMTS, NGN, Bluetooth, WLL The

Uploaded by

atmadeepchauhan
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
83 views3 pages

Put WMC

This document appears to be an exam for a wireless and mobile communications course, containing multiple choice and short answer questions. The questions cover topics such as: - Microwave link design and path loss modeling - Multipath fading characteristics and small scale fading types - Diversity techniques in wireless communications - Adaptive equalization algorithms and factors affecting performance - Spread spectrum techniques like DS-SS and performance metrics - Factors affecting FDMA schemes and example calculations - Cellular system design considerations like coverage, capacity, and handoff - Channel assignment strategies and capacity improvement through cell splitting - Standards and technologies like GSM, IS-95, UMTS, NGN, Bluetooth, WLL The

Uploaded by

atmadeepchauhan
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

SUBJECT CODE: EEC-801

(Following Paper ID and Roll No. to be filled in your Answer Book) PAPER ID: Roll No .

SESSION 2012-13

NCET, AGRA B.Tech.(EC) 4th YEAR 8th SEMESTER EXAMINATION (Pre University Test), 2012-13 WIRELESS & MOBILE COMMUNICATION Time: 3 Hour Note: (i) Attempt ALL Sections. (ii) All Sections carry equal marks.
1. Attempt

Total Marks: 100

any four parts of the following:

(5*4=

20) (a) Design rule for microwave link is 60% clearance of the first Fresnel zone. For a 1 km link at 2.5 GHz, what is the maximum first Fresnel zone radius? What clearance is required for this system? Do Practical link budget design using long distance path loss model. What do you understand by Time delay Spread? Define Coherence BW. Explain small scale fading type based on Doppler spread & coherence time. Explain 3 basic propagation mechanisms, consider ground reflection model. Calculate total electric field at any distance D from transmitting antenna. Derive the impulse response model of a multipath channel.

(b) (c) (d) (e)

2. Attempt

any four parts of the following:

(5*4=20)

(a)

Classify & explain diversity techniques used in wireless communication.

(b) (c)

Describe Adaptive equalization? What are the factors that determine the performance of the Algorithm used for adaptive equalization? Derive the average probability of Bit error for DS-SS system for K number of user.

(d)

Write short notes on1. Adaptive quantization 2. Companding 3. Vector quantization

(e) Elaborate the factors of FDMA schemes? Give its two applications. If in AMPS cellular operator is allocated 12.5 MHz for each simplex band and if Bt is 12.5 MHz, Bguard is 10 KHz, find the number of channel available in an FDMA system.

3. Attempt

any two parts of the following:

(10*2=20)

(a) What are the different methods of improving geographical coverage and capacity in cellular system? Explain. (b) What is prioritizing Hand-off & where it is used? If 20 MHz of total spectrum is allocated for a duplex wireless cellular system and each simplex channel has 25 KHz RF bandwidth. Find no of duplex channel and total no of channel per cell size, if N=4 cell reuse is used. (c) What are the various channel assignment strategies? How capacity improvement is achieved using cell splitting approach.

4. Attempt

any two parts of the following:

(10*2=20)

(a)

What does GSM stands for? Describe its entire working. What are the features added in 2.5 G wireless network from 2G network. Explain the working, operation, features of IS-95 in details. Explain the GSM logical channels in detail. Also explain the procedure for Mobile cell origination & Termination.

(b) (c)

5. Attempt

any two parts of the following:

(10*2=20)

(a)

(b) (c)

Write short notes on following 1. UMTS 2. NGN 3. Ad-hoc Network Describe Bluetooth & WLL. Explain the wireless standards for IMT 2000.

You might also like