FLOW ~TECH

AI R

SCD
RCD
PCD
CED

DIS T RIBUTION

SPECIALIST

Supply Ceiling Diffuser

Return Ceiling Diffuser
Perforated Ceiling Diffuser
Combined Ceiling Diffuser
w ith Egg Crate Core

FAISAL JASSIM INDUSTRIES (L.L.C.)

P 0. Box: I 871 Dubai, U.A.E.
Tel: +971 4 Z582 64 0
Fax: + 971 4 25.826~ 1
E-mail: [email protected]
Website: www.faisaljassim.ae
www.flowtechind.com

CEILING DIFFUSERS
A I R

D I S T R I B U T I O N

S P E C I A L I S T

APPLICATIONS
FLOWTECH provides a wide range of Ceiling Diffusers
to suite the various requirements of ceiling air
distribution.
Supply air ceiling diffusers (SCD) and return air ceiling
diffusers (RCD) can be Square or Rectangular Ceiling
Diffusers with One, Two, Three or Four Way Patterns.
The different diffuser patterns are used to control
supply air direction. Typical examples of such
application are supply diffusers near glass areas, supply
diffusers in corridors, and supply diffusers in space
corners.
FLOWTECH SCD is supplied with Opposed Blades
Damper (OBD) to facilitate for precise air volume
control. (Note: OBD is used for fine tuning of air
volume flow rate, and should not be used to replace
branch Volume Control Damper). RCD is supplied
without OBD and usually used for return air
applications. In certain applications, SCD must be used
as return air diffuser; that is, where return air volume
requires precise control, such as room pressurization
applications. This is frequently required for Clean Room
Engineering
applications
such
as
Hospitals,
Pharmaceutical Plants, Biotech Laboratories, Computer
Rooms and Silicon Industry.

Supply Air 4 Way ceiling diffuser (SCD-4S)

Supply Air 3 Way ceiling diffuser (SCD-3S)

SCD and RCD are commonly used for Heating,

Cooling and Isothermal Ventilation applications.
However, such applications are limited to 4 meters
ceiling high. For Ceiling Heights above 4.0 Meters, refer
to specialty terminal devices, such as Jet Nozzle
Diffusers and Drop Ceiling Diffusers.
SCD and RCD are tested by ETL Semko USA to
ASHRAE 70 - 1991 standard method of testing for
rating performance of air outlets and inlets.

Return Air Rectangular 4 way ceiling diffuser (RCD- 4R)

Perforated ceiling diffuser (PCD) is of same

construction as SCD but with a removable perforated
face of G1 sheet powder coated, or aluminium sheet as
optional.

4 Way supply ceiling diffuser with perforated face (PCD)

Rev. 0:2005/1

F-1

FLOW ~ECH
AIR

DISTR I BUTION

SPECIALIST

Opposed Blades Damper (OBD):

MATERIAL:

Frame and Core are made of extruded

aluminum alloy 6063 to T6 Heat Treatment.
The Opposed Blades Damper is extruded
aluminum alloy 6063/T6.
Mitred Comer
Spring loaded core

FLOWTECH OBD is fixed to the rear frame of SCD

model by means of "S" clamp for ease of removal and
rigid construction.
To adjust the OBD opening, remove the core and tum
the adjustment screw available at the front face of the
damper (Clockwise to open I Counter Clockwise to
Close).

(A)-12 mm

- g~~F-~~
(A)+66mm
(A)+ I45mm

I
_ __

Multi pattern ceiling diffuser section without damper (RCD)

(A)-12 mm

J\J\1\J\J\

;:::=.~=;;~::=~~~~~ - ~

...j

~------~--~--~~--~~--~~--~----~--~--

-!--~----+l3ml

Multi pattern ceiling d1ffuser section with damper (SCD)

Square ceiling diffusers

Neck Size

F-2

Rectangular ceiling diffusers

Face Size

ISO x ISO

295

22S

370 X 370

22S

295

300 X 300

445

37S

520 X 520

37S

445

4S0 X 450

595

595

S2S

S2S

670

670

600 X 600

745

745

Ax B Size (mm)

225 X ISO
300 X ISO
37S X ISO
4SO x ISO
S2S X ISO
300 X 22S
375 X 225
4S0 X 22S
S25 X 225

375 X
450 X
525 X
600 X
670 X
450 X
525 X
600 X
670 X

300
300
300
300
300
375
375
375
375
Rev. 0:2005/ I

FLOW~ ~ECH
AIR

D IST R IBUTION

SPECIALIST

Available in Powder coated RAL 9010 or

.as standerd color 9016

__.- By self tapping screw through the ned<

o f d1ffuser into sheet metal duct

Other powder coated color fi nishes are available

on request.
Fixing options are Concealed Screw Fixing (CSF).

- ~~Standard fixing (CSF)

Opposed blade damper for supply (optional) - OBD

The specially designed blades have an overlapping lip
w hich assure a t ight closure.
Control is done by adjustment screw t hrough t he face
of diffuser.
Material: Extruded aluminum construction.
Opposed blade damper for s upply (OBD)

/ -~
i 1 i 1 ~~~--

Equalizing grid (optional)- EG

Individually adjustable blades, to provide precise
directional control of air through the diffuser.
Nylon tension bushes.
Extruded aluminum construction.

I
-

Circular duct connection

adaptors (optional)

00

Suit able for supply and exhaust ceilling

diffusers.
Round inlet.
Galvanized steel construction.
Special construction available on
request.
Nom.
sizes
ISO

225
300
375
450
525
600

00

0W

123
198
248
313
398
398
498

123
198
248
313
398
398
498

Type RS

HI
245
320
368
435
520
520
620

H2
263
338
388
453
538
538
638

2H

...___,_

.____w~--.1
RSI

Type RT

RT

H3
245
320
368
435
520
520
620

Square to round adapto r Top inlet

H4
263
338
388
453
538
538
638

Squane to round adaptor

witho ut perforat ed plate. Side inlet

... so 1-

~======~
.....

...

~r

Fixing
4 holes 8 mm diameter
for straps or droop rods.

Equalizing grid - optional (EG)

RS

RSI

Square to round adapto r with perforated

plate side inlet

Insulated squane to round adapt o r

wit h perforated plate. Side inlet

Circular Duct Connection Adaptors

Rev. 0:2005/ I

F-3

CEILING DIFFUSERS
A I R

D I S T R I B U T I O N

S P E C I A L I S T

MULTI PATTERN CEILING DIFFUSERS

4 WAY DISCHARGE

Square (SCD-4S)

3 WAY DISCHARGE

Rectangular (SCD-4R)

Square (SCD-3S)

Rectangular (SCD-3R)

Rectangular
Vertical (SCD-2RV)

Rectangular
Horizontal (SCD-2RH)

2 WAY DISCHARGE

Square (SCD-2S)

Corner (SCD-2SC)

1 WAY DISCHARGE

Square (SCD-1S)

F-4

Rectangular
Vertical (SCD-1RV)

Rectangular
Horizontal (SCD-1RH)

Rev. 0:2005/1

FLOW '-TECH
AIR

DISTRIBUTION

SPECIALIST

Perforated Cei ling Diffuser (PCD)

Product Features:

This product is designed to provide laminar flow with

The perforated ceiling diffuser is especially effective in

low velocities, evenly distributed downward moving

areas with heavy, localized intemal loads, as in

conditioned air.

computer rooms. The column of air delivered by the

perforated ceiling diffuser cools t he load source
directly without generating high velocities in the
occupied space.

Accessories:
Opposed blade damper for supply (optional)- OBD
The specially designed blades have an overlapping lip
w hich assure a tight closure.
Control is done by adjustment screw through the face of
diffuser.
Material: Extruded aluminum construction.

Rev. 0:2005/ I

Equalizing grid (optional) - EG

Individually adjustable blades, to provide precise
directional control of air t hrough t he diffuser.
Nylon tension bushes.
Extruded aluminum construction.

F-5

AIR

DISTRI B UTION

SPECIALIST

- -

Gasket (optional)

Combined Ceiling Diffusers (CED)

(A)- 12 mm

I 3B mm

. 73921

~~-------;;:;;
~
~~~

I II

133mm

(A)+ 145mm

Side Section of Combined Ceiling Diffusers (CED)

Product Feature s:

Standard Sizes:

(Use any combi nation of length & widt h)

This model is designed to handle bot h supply and

return air requirements in a si ngle unit.

Length A (mm)

Width B (mm)

Conditioned air is supplied at t he outer perimeter,

and the retum is through t he center core.

300

300

375

375

The center core which is t he ret urn part is made of

alumi nium egg crate grid (CEO), the size can be
determined according t o the supply and return air
flow requirements.

450

450

525

525

600

600

The minimum size of the center core is 75mm, the

maximum size is equal to t he nominal size of the
combined ceiling diffuser minus 75mm, however
the size ofthe core must be in steps of 75mm.

To convert into Imperial units use (I inch=25mm)

Non standard sizes are available upon request
Core size to be mentioned separately

Available types of finishing:

Powder coated (painted to RAL codes)

F-6

Rev. 0:2005/ I

AIR

DISTRIBUTION

SPECIALIST

DOD-DOI

B-

DODD

RAL Code
Color

Width in mm o
inch

Length in mm
or inch

SCD
SCD
SCD
SCD
SCD
SCD
SCD
SCD
SCD
SCD
PCD
CED

or
or
or
or
or
or
or
or
or
or

RCD RCD RCD RCDRCD RCDRCD RCD RCD RCD -

4S : 4 Way Square D iffuser

4R : 4 Way Rectangular Diffuser
3S : 3 Way Square D iffuser
3R : 3 Way Rectangular Diffuser
2S : 2 Way Square D iffuser
2RV: 2 Way Rectangular Vertical
2RH : 2 Way Rectangular Horizontal
I S : I Way Square D iffuser
I RV: I Way Rectangular Vertical
I RH : I Way Rectangular Horizontal
: Perforated Ceiling Diffuser
: Combined Ceiling D iffuser
with Egg Crate Core Pattem.

SCD-4S-300mm X 300mm-9010
Stands for Supply Ceiling Diffuser, 4W ay, 300x300
coating color RAL 90 I 0.

Rev. 0:2005/1

E-7

CEILING DIFFUSERS
A I R

D I S T R I B U T I O N

S P E C I A L I S T

GENERAL NOTES
Pages onwards give performance data for all models
and variants, and unless otherwise stated the following
general notes apply:
1

For standard room height of 2.75 metres, throws

should be taken as the distance to the nearest wall
(minimum plan dimension, MPD), or to half the
distance between diffuser centres.

When mounted without a surrounding closed

ceiling the throw will be reduced by approx. 40%,
ie throw = table throw x 0.6
However in order to avoid the airflow 'dumping'
into the space when on cooling mode, giving
excessive velocities, it may be necessary for coanda
plates to be fitted to the diffuser. Please check with
factory for details.

F-8

NC, and Pressure values shown, are based on a

diffuser complete unit with an opposed blade
damper in the fully open position for the supply
diffuser and without for the return diffuser. The
damper should only be used for fine balancing, as
for every doubling of pressure there is a resulting
increase in the noise level of +9dB for supply, or
+5dB for exhaust.

Models with reduced necks.

There is a 'dilution effect' on performance for these
models, as the air tends to spread behind the core,
reducing throws by up to 20%, depending on the
relationship between the neck size and the base
diffuser size. For more information please check
with the factory.

For rectangular diffusers, throw values tested are on

the longer side of the diffusers. For the shorter side
throws, values are to be multiplied by 0.72.

Throws shown are to three terminal velocity of

0.25m/s, 0.5m/s, 0.75m/s, (50fpm, 100fpm,
150fpm) with coanda effect across a flat ceiling,
and with supply air at conditions with max
DT=10K cooling.

Another fault that can give rise to 'dumping' on

cooling cycles is low jet velocities at the diffuser
core. In order to avoid this it is advisable to ensure
that neck velocities do not drop below 0.75m/s,
(150fpm).
The accoustical data were tested in accordance to
ASHRAE 70-1991 standard. The octave band
sound power levels obtained were plotted to
determine the point of tangency with the highest
rank Noise Criteria curve (NC) to establish the
NC. Noise Criteria ratings were determined by
subtracting room absorption of 10dB from the
sound power level data.

10 Corrections for 1, 2 and 3 way diffusers

3 way pattern throw :

Multiply by 1.15

2 way pattern throw :

Multiply by 1.25

1 way pattern throw :

Multiply by 1.45

11 The following tables include the results of tests

conducted on samples of air terminals. The test
results include Noise Criteria (NC), static pressure
verses air flow, throw and effective area.
Extrapolation was used to obtain the performance
for other sizes and other parameters within the
range of products mentioned above.
Test method included in ETL report.

Rev. 0:2005/1

CEILING DIFFUSERS
A I R

D I S T R I B U T I O N

S P E C I A L I S T

PERFORMANCE DATA - SI UNITS

SYMBOLS
L/Sec :Air volume in litres per second.
Af
:Effective free area in square meters.
Vf
:Face velocity in meters per second.
Ak
:Neck area in square meters.
Vk
:Neck velocity in meters per second.
Pt
:Total pressure in pascal
Th.
:Throw in meters.
NC
:Noise Criteria.
NOTES
The large throw values are based on the minimum
terminal velocity of 0.25 m/Sec.
The middle throw values are based on the medium
terminal velocity of 0.50 m/Sec.
The small throw values are based on the maximum
terminal velocity of 0.75 m/Sec.

CONDITIONS
Supply or Return as indicated.
Noise Criteria values are based on (10 dB) room
attenuation.
Damper is fully open.
Maximum room height = 4.0m
Cooling @ T = 10k
CORRECTION FOR 1, 2 AND 3 WAY
Noise criteria : No correction required.
Pressure
: No correction required.
Throw
: 3 way - increase for 15%
: 2 way - increase for 25%
: 1 way - increase for 45%
Drop
: No correction required.

ETL TEST REPORTS

Rev. 0:2005/1

F-9

CEILLING DIFFUSERS
A I R

D I S T R I B U T I O N

S P E C I A L I S T

SUPPLY AIR CEILING DIFFUSER, 4 WAY NECK

AREA
(m2)

FREE
AREA
(m2)

150x150

0.019

0.009

225x225

0.046

0.021

300x300

0.083

0.036

375x375

0.132

0.055

450x450

0.192

0.077

525x525

0.263

0.102

600x600

0.346

0.128

SIZE
(mmxmm)

See notes on page F-9

Rev. 0:2005/1

NECK
VELOCITY (m/s)
Q (L/s)
Vf (m/s)
Pt (Pa)
Throw (m)
NC
Q (L/s)
Vf (m/s)
Pt (Pa)
Throw (m)
NC
Q (L/s)
Vf (m/s)
Pt (Pa)
Throw (m)
NC
Q (L/s)
Vf (m/s)
Pt (Pa)
Throw (m)
NC
Q (L/s)
Vf (m/s)
Pt (Pa)
Throw (m)
NC
Q (L/s)
Vf (m/s)
Pt (Pa)
Throw (m)
NC
Q (L/s)
Vf (m/s)
Pt (Pa)
Throw (m)
NC

0.9

1.2

1.8

2.4

2.7

3.3

3.6

(SCD - 4S)

SI - UNITS

1.00

1.50

2.00

2.25

2.50

2.75

19
2.13
3
1.2 2.4
<15
46
2.21
2
2.1 3.8
<15
83
2.29
2
2.7 5.4
<15
132
2.38
2
3.6 6.9
<15
192
2.48
2
4.2 8.1
<15
263
2.59
2
4.6 9.3
<15
346
2.70
2
5.7 11.0
<15

29
3.19
7
1.8 3.4
<15
69
3.31
3
3.3 5.4
<15
124
3.44
4
3.9 7.2
<15
198
3.57
4
5.1 9.0
<15
288
3.72
4
6.0 11.0
<15
395
3.88
4
7.2 12.0
16
519
4.05
4
8.1 14.0
19

38
4.26
13
2.7
<15
92
4.41
9
3.7
<15
166
4.58
8
5.4
<15
264
4.76
8
6.9
18
384
4.96
8
8.1
22
526
5.17
9
9.6
25
691
5.41
9
11.0
29

43
4.79
17
3.0
<15
104
4.96
11
3.9
18
187
5.15
11
5.9
17
296
5.36
11
7.5
23
432
5.58
11
8.9
28
592
5.82
12
10.4
31
778
6.08
12
12.0
35

48
5.32
21
3.3
<15
115
5.51
14
4.0
21
207
5.73
14
6.3
19
329
5.95
14
8.1
28
480
6.20
14
9.6
34
658
6.47
16
11.0
37
864
6.76
16
13.0
40

52
5.85
29
3.5
17
127
6.07
18
4.7
23
228
6.30
18
6.8
22
362
6.55
18
8.6
32
528
6.82
18
10.1
37
724
7.11
20
11.7
40
951
7.43
20
13.5
43

1.2

2.1

2.7

3.6

4.2

4.8

5.4

1.8

2.3

3.6

4.8

5.7

6.6

7.5

4.2

2.0

5.7

2.7

8.1

4.1

10.0 5.3

12.0 6.2

14.0 7.2

16.0 8.3

4.5

2.1

5.9

3.0

8.6

4.5

10.8

5.7

12.8

6.6

15.0

7.8

17.1

9.0

4.8

2.4

6.1

3.6

9.0

5.0

11.0

6.3

14.0

7.4

16.0

8.7

18.0 10.1

3.00

4.9

7.0

9.5

12.2

14.4

16.8

19.1

57
6.38
38
2.7 3.6
19
138
6.62
20
4.2 5.4
25
249
6.87
22
5.4 7.2
25
395
7.14
22
6.9 9.0
35
576
7.44
22
8.1 11.0
39
790
7.76
25
9.6 12.0
42
1037
8.11
25
11.0 14.0
45

3.50

4.9

3.0

7.8

4.8

9.9

6.3

13.0 7.8

15.0 9.3

18.0 11.0

20.0 12.0

67
7.45
41
3.9
22
161
7.72
31
6.0
28
290
8.02
32
7.8
32
461
8.33
32
9.6
41
671
8.68
32
11.0
44
921
9.05
36
13.0
47
1210
9.46
36
15.0
50

4.00

5.4

8.4

11.0

14.0

16.0

19.0

22.0

76
8.51
52
3.3 4.2
24
184
8.82
42
5.1 6.3
33
332
9.16
43
6.9 8.1
36
527
9.52
43
8.4 10.0
45
767
9.92
43
12.0 16.0
48
1053
10.34
49
12.0 14.0
51
1383
10.81
49
14.0 16.0
53

5.4

9.3

11.0

15.0

18.0

21.0

24.0

Contd...
F-10

CEILLING DIFFUSERS
A I R

D I S T R I B U T I O N

S P E C I A L I S T

SUPPLY AIR CEILING DIFFUSER, 4 WAY NECK

AREA
(m2)

FREE
AREA
(m2)

225x150

0.029

0.014

300x150

0.040

0.018

375x150

0.050

0.022

450x150

0.060

0.026

525x150

0.071

0.030

600x150

0.081

0.034

300x225

0.061

0.027

SIZE
(mmxmm)

See notes on page F-9

Rev. 0:2005/1

(SCD - 4R)

SI - UNITS

NECK
VELOCITY (m/s)

1.00

1.50

2.00

2.25

2.50

2.75

3.00

3.50

4.00

Q (L/s)
Vf (m/s)
Pt (Pa)
Throw (m)
NC
Q (L/s)
Vf (m/s)
Pt (Pa)
Throw (m)
NC
Q (L/s)
Vf (m/s)
Pt (Pa)
Throw (m)
NC
Q (L/s)
Vf (m/s)
Pt (Pa)
Throw (m)
NC
Q (L/s)
Vf (m/s)
Pt (Pa)
Throw (m)
NC
Q (L/s)
Vf (m/s)
Pt (Pa)
Throw (m)
NC
Q (L/s)
Vf (m/s)
Pt (Pa)
Throw (m)
NC

29
2.17
2
1.8
<15
40
2.20
2
2.1
<15
50
2.24
3
2.4
<15
60
2.28
3
2.7
<15
71
2.32
3
2.7
<15
81
2.36
3
2.8
<15
61
2.25
3
2.7
<15

44
3.25
3
2.4
<15
60
3.31
3
3.0
<15
75
3.37
4
3.3
<15
91
3.43
4
3.6
<15
106
3.49
4
3.9
<15
122
3.55
4
4.2
<15
92
3.37
4
3.6
<15

59
4.33
7
3.3
<15
79
4.41
8
3.6
<15
100
4.49
9
4.5
<15
121
4.57
9
4.8
<15
142
4.65
9
4.8
<15
162
4.73
9
5.7
<15
123
4.49
9
4.8
<15

66
4.87
12
3.6
<15
89
4.96
11
3.9
15
113
5.05
13
4.8
15
136
5.14
13
5.1
15
159
5.23
13
5.1
15
183
5.32
13
6.2
16
138
5.06
13
5.1
15

73
5.41
17
3.9
<15
99
5.51
14
4.2
16
125
5.61
17
5.1
16
151
5.71
17
5.4
16
177
5.81
17
5.4
16
203
5.91
17
6.6
17
153
5.62
17
5.4
16

81
5.96
23
4.2
17
109
6.06
22
4.5
19
138
6.17
21
5.4
19
166
6.28
21
5.7
20
195
6.39
21
5.7
20
223
6.50
21
7.1
21
169
6.18
21
5.7
20

88
6.50
29
4.5
20
119
6.61
30
4.8
21
150
6.73
26
5.7
22
181
6.85
26
6.0
23
212
6.97
26
6.0
23
243
7.09
26
7.5
24
184
6.74
26
6.0
23

103
7.58
38
5.1
26
139
7.72
38
5.4
27
175
7.85
36
6.3
28
212
7.99
36
6.9
29
248
8.13
36
6.9
29
284
8.27
36
8.1
30
215
7.86
33
6.9
29

118
8.66
51
5.4
30
159
8.82
51
6.0
31
200
8.97
50
7.2
32
242
9.13
50
7.8
33
283
9.29
50
7.8
33
325
9.46
50
8.4
34
245
8.99
42
7.8
33

1.2

1.5

1.5

1.8

1.8

1.7

1.8

3.3

1.8

4.2

2.1

4.2

2.1

4.5

2.4

4.8

3.0

5.5

3.0

4.5

2.4

4.2

2.4

4.8

2.7

5.7

3.3

6.0

3.6

6.9

3.6

7.5

3.9

6.0

3.6

5.1

2.7

5.7

3.0

6.9

3.6

7.5

3.9

8.1

3.9

8.4

4.4

7.5

3.9

5.6

3.0

6.2

3.3

7.2

3.9

7.8

4.2

8.4

4.2

8.9

4.8

7.8

4.2

6.0

3.3

6.6

3.6

7.5

4.2

8.1

4.5

8.7

4.7

9.3

5.3

8.1

4.5

6.3

3.6

6.9

3.9

7.8

4.5

8.6

4.8

9.0

5.1

9.8

5.7

8.6

4.8

6.6

4.2

7.2

4.5

8.1

5.1

9.0

5.4

9.3

5.7

10.0 6.6

9.0

5.4

7.2

4.5

7.8

5.1

8.7

6.0

9.9

6.3

10.0

6.3

11.0

7.2

9.9

6.3

7.5

8.4

9.9

11.0

11.0

12.0

11.0

Contd...
F-11

CEILLING DIFFUSERS
A I R

D I S T R I B U T I O N

S P E C I A L I S T

SUPPLY AIR CEILING DIFFUSER, 4 WAY SIZE

(mmxmm)

NECK
AREA
(m2)

FREE
AREA
(m2)

0.077

0.034

375x225

0.093

0.040

525x225

0.109

0.046

600x225

0.125

0.052

375x300

0.105

0.045

450x300

0.126

0.053

525x300

0.148

0.061

See notes on page F-9

Rev. 0:2005/1

SI - UNITS

NECK
VELOCITY (m/s)

1.00

1.50

Q (L/s)
Vf (m/s)
Pt (Pa)
Throw (m)

77
2.29
3
2.7

116
3.43
4
2.7
3.9

1.8

NC

450x225

(SCD - 4R)

Q (L/s)
Vf (m/s)
Pt (Pa)
Throw (m)
NC
Q (L/s)
Vf (m/s)
Pt (Pa)
Throw (m)
NC
Q (L/s)
Vf (m/s)
Pt (Pa)
Throw (m)
NC
Q (L/s)
Vf (m/s)
Pt (Pa)
Throw (m)
NC
Q (L/s)
Vf (m/s)
Pt (Pa)
Throw (m)
NC
Q (L/s)
Vf (m/s)
Pt (Pa)
Throw (m)
NC

4.5

<15

2.4

2.4

2.4

2.4

2.4

2.4

93
2.33
3
3.3
<15
109
2.37
3
3.0
<15
125
2.42
3
3.0
<15
105
2.33
3
3.3
<15
126
2.38
3
3.0
<15
148
2.42
3
3.6
<15

6.9

2.00

2.25

155
4.58
9
3.6 5.1 7.8

174
5.15
13
5.4 5.4 8.3

17

21

<15

6.0

3.0

6.0

3.0

6.0

3.3

6.6

3.0

6.0

3.3

7.5

3.6

140
3.50
4
4.2
<15
164
3.56
4
4.8
<15
188
3.63
4
5.1
<15
157
3.50
4
4.5
<15
189
3.57
4
4.8
<15
222
3.64
4
5.4
<15

7.5

4.2

7.5

4.2

7.5

4.5

7.5

4.5

7.2

4.2

9.3

5.1

187
4.66
9
6.0
<15
219
4.75
9
6.0
<15
250
4.83
9
6.0
<15
209
4.67
9
6.3
<15
252
4.76
9
5.7
<15
295
4.85
9
7.5
<15

9.0

4.7

8.7

4.7

8.7

5.0

9.0

5.0

8.4

4.7

11.0 5.7

210
5.24
13
6.5
16
246
5.34
13
6.3
16
282
5.44
13
6.5
17
235
5.25
13
6.6
17
284
5.35
13
6.2
17
332
5.46
13
8.0
17

2.50
193
5.72
17
7.2 5.7

8.7

2.75

3.00

3.50

213
6.29
21
6.2 6.0 9.2

232
6.87
26
5.1 6.3 9.6

271
8.01
33
5.7 6.9 11.0

24

9.3

5.1

9.0

5.1

9.0

5.4

9.5

5.4

8.7

5.1

11.4

6.3

233
5.83
17
6.9 9.6
18
273
5.93
17
6.6 9.3
18
313
6.04
17
6.9 9.3
19
261
5.84
17
6.9 9.9
19
315
5.95
17
6.6 9.0
20
369
6.06
17
8.4 12.0
20

27

5.6

5.6

5.9

5.9

5.6

6.9

257
6.41
21
7.2
22
300
6.53
21
7.1
22
344
6.65
21
7.2
23
287
6.42
21
7.4
23
347
6.54
21
6.9
24
406
6.67
21
8.9
24

30

10.1

6.0

9.6

6.0

9.8

6.3

10.2

6.3

9.5

6.0

12.8

7.5

280
6.99
26
7.5
25
328
7.12
26
7.5
25
376
7.25
26
7.5
26
314
7.00
26
7.8
26
378
7.14
26
7.2
27
443
7.27
26
9.3
27

4.00
309
9.15
42
6.6 7.8 11.0

34

11.0 6.6

9.9

6.9

10.0 6.9

11.0 6.9

9.9

6.9

13.0 8.1

327
8.16
36
8.1
31
382
8.31
36
8.4
31
438
8.46
36
8.7
32
366
8.17
36
8.4
32
442
8.33
36
8.4
33
517
8.49
36
9.9
33

38

11.0

7.2

11.0

7.2

11.0

7.5

11.0

7.5

11.0

7.2

14.0

9.0

373
9.32
50
8.7
35
437
9.49
50
9.0
35
501
9.67
50
9.0
36
418
9.34
50
9.3
36
505
9.52
50
8.7
37
591
9.70
50
11.0
37

12.0

13.0

13.0

13.0

12.0

16.0

Contd...
F-12

CEILLING DIFFUSERS
A I R

D I S T R I B U T I O N

S P E C I A L I S T

SUPPLY AIR CEILING DIFFUSER, 4 WAY SIZE

(mmxmm)

NECK
AREA
(m2)

600x300

0.169

450x375

0.159

525x375

0.186

600x375

0.213

525x450

0.225

600x450

0.258

600x525

0.302

FREE
NECK
AREA
VELOCITY (m/s)
(m2)
Q (L/s)
Vf (m/s)
Pt (Pa)
0.069
Throw (m)
NC
Q (L/s)
Vf (m/s)
Pt (Pa)
0.066
Throw (m)
NC
Q (L/s)
Vf (m/s)
Pt (Pa)
0.075
Throw (m)
NC
Q (L/s)
Vf (m/s)
Pt (Pa)
0.084
Throw (m)
NC
Q (L/s)
Vf (m/s)
Pt (Pa)
0.089
Throw (m)
NC
Q (L/s)
Vf (m/s)
Pt (Pa)
0.100
Throw (m)
NC
Q (L/s)
Vf (m/s)
Pt (Pa)
0.114
Throw (m)
NC

2.4

2.4

2.7

2.7

2.4

3.3

3.3

(SCD - 4R)

SI - UNITS

1.00

1.50

2.00

2.25

2.50

2.75

3.00

3.50

169
2.47
3
3.3
<15
159
2.43
3
3.3
<15
186
2.48
3
3.9
<15
213
2.53
3
4.5
<15
225
2.53
3
4.2
<15
258
2.58
3
4.8
<15
302
2.64
2
5.1
<15

254
3.71
4
6.0
<15
238
3.65
4
6.0
<15
279
3.72
4
6.3
<15
320
3.79
4
6.3
<15
337
3.80
4
6.0
<15
386
3.88
4
7.2
<15
452
3.96
4
7.8
<15

339
4.94
9
7.8
<15
317
4.85
9
7.8
<15
372
4.95
9
8.1
<15
427
5.05
9
8.7
<15
449
5.06
9
8.4
<15
515
5.17
9
9.6
<15
603
5.29
9
10.0
15

381
5.56
13
8.3
18
358
5.46
13
8.3
18
419
5.57
13
8.6
18
480
5.68
13
9.3
18
506
5.69
13
8.9
18
579
5.81
13
10.4
19
679
5.95
12
11.0
20

423
6.18
17
8.7
21
398
6.06
17
8.7
21
466
6.19
17
9.0
21
534
6.32
17
9.9
22
562
6.33
17
9.3
22
644
6.46
17
11.0
23
754
6.61
16
12.0
24

466
6.80
21
9.2
25
437
6.67
21
9.2
21
512
6.81
21
9.5
25
587
6.95
21
10.5
26
618
6.96
21
9.8
26
708
7.11
21
11.9
27
830
7.27
20
12.2
28

508
7.41
26
9.6
28
559
7.28
26
9.6
28
559
7.43
26
9.9
28
640
7.58
26
11.0
29
674
7.59
26
10.0
29
773
7.75
26
13.0
30
905
7.93
25
13.0
31

593
8.65
36
11.0
34
557
8.67
36
11.0
34
652
8.67
36
11.0
34
747
8.84
36
16.0
35
786
8.86
36
15.0
36
901
9.04
36
14.0
36
1056
9.25
36
14.0
37

7.2

3.9

7.2

3.9

7.8

3.9

8.7

4.2

7.8

4.2

9.3

4.8

9.9

5.4

9.3

5.7

9.3

5.7

9.3

6.0

11.0 6.0

11.0 5.7

12.0 6.6

13.0 6.9

11.0 6.3

11.0 6.3

12.0 6.6

13.0 6.6

13.0 6.3

14.0 7.5

15.0 7.8

12.2

6.9

12.2

6.9

12.6

7.2

13.4

7.2

13.1

6.9

14.9

8.4

15.8

8.7

13.0

7.4

13.0

7.4

13.0

7.5

14.0

8.1

14.0

7.8

16.0

9.2

17.0

9.6

13.5

7.8

13.5

7.8

13.8

7.8

15.0

9.0

14.3

8.7

16.7

9.9

17.4

11.0

14.0 8.4

14.0 8.4

14.0 8.4

16.0 12.0

15.0 12.0

18.0 11.0

18.0 11.0

4.00

15.0

15.0

16.0

17.0

17.0

18.0

20.0

677
9.88
50
9.0 11.0
38
636
9.71
50
9.0 11.0
38
745
9.91
50
9.3 12.0
38
854
10.11
50
13.0 17.0
39
899
10.12
50
14.0 17.0
39
1030
10.34
50
12.0 15.0
40
1207
10.57
49
12.0 15.0
41

17.0

17.0

18.0

18.0

19.0

20.0

22.0

See notes on page F-9

Rev. 0:2005/1

F-13

CEILLING DIFFUSERS
A I R

D I S T R I B U T I O N

S P E C I A L I S T

RETURN AIR CEILING DIFFUSER, 4 WAY SIZE

(mmxmm)

150x150

225x225

300x300

375x375

450x450

525x525

600x600

NECK
AREA
(m2)
0.019

0.045

0.083

0.132

0.192

0.263

0.346

See notes on page F-9

F-14

(RCD - 4S)

SI - UNITS

NECK
VELOCITY
(m/s)

1.00

1.50

2.00

2.25

2.50

2.75

3.00

3.50

4.00

Q (L/s)

19

29

38

43

48

52

57

67

76

Pt (Pa)

12

18

20

21

22

24

35

45

NC

<15

<15

<15

<15

<15

15

15

21

25

Q (L/s)

45

68

91

102

113

125

136

159

181

Pt (Pa)

10

14

20

22

23

30

37

55

75

NC

<15

<15

<15

18

22

26

30

36

41

Q (L/s)

83

124

166

187

207

228

249

290

332

Pt (Pa)

10

14

20

22

23

30

37

55

75

NC

<15

<15

16

21

26

30

33

39

45

Q (L/s)

132

198

264

296

329

362

395

461

527

Pt (Pa)

10

14

20

22

23

30

37

55

75

NC

<15

15

19

24

28

32

36

42

47

Q (L/s)

192

288

384

432

480

528

576

671

767

Pt (Pa)

10

14

20

22

23

30

37

55

75

NC

16

18

21

26

31

35

38

44

50

Q (L/s)

263

395

526

592

658

724

790

921

1053

Pt (Pa)

10

14

20

22

23

30

37

55

75

NC

18

21

23

28

33

37

40

46

52

Q (L/s)

346

519

691

778

864

951

1037

1210

1383

Pt (Pa)

10

14

20

22

23

30

37

55

75

NC

19

22

24

29

34

38

42

48

53

Contd...

Rev. 0:2005/1

CEILLING DIFFUSERS
A I R

D I S T R I B U T I O N

S P E C I A L I S T

RETURN AIR CEILING DIFFUSER, 4 WAY SIZE

(mmxmm)

225x150

300x150

375x150

450x150

525x150

600x150

300x225

375x225

450x225

375x225

525x225

600x225

375x300

450x300

NECK
AREA
(m2)
0.029

0.040

0.050

0.060

0.071

0.081

0.061

0.077

0.093

0.077

0.109

0.125

0.105

0.126

See notes on page F-9

Rev. 0:2005/1

(RCD - 4R)

SI - UNITS

NECK
VELOCITY
(m/s)

1.00

1.50

2.00

2.25

2.50

2.75

3.00

3.50

4.00

Q (L/s)

29

44

59

66

73

81

88

103

118

Pt (Pa)

10

14

20

22

23

30

37

55

75

NC

<15

<15

<15

17

19

24

28

33

38

Q (L/s)

40

60

79

89

99

109

119

139

159

Pt (Pa)

10

14

20

22

23

30

37

55

75

NC

<15

<15

<15

18

21

25

29

34

40

Q (L/s)

50

75

100

113

125

138

150

175

200

Pt (Pa)

10

14

20

22

23

30

37

55

75

NC

<15

<15

<15

19

23

27

31

36

42

Q (L/s)

60

91

121

136

151

166

181

212

242

Pt (Pa)

10

14

20

22

23

30

37

55

75

NC

<15

<15

16

20

24

28

32

37

43

Q (L/s)

71

106

142

159

177

195

212

248

283

Pt (Pa)

10

14

20

22

23

30

37

55

75

NC

<15

<15

16

21

25

29

33

38

44

Q (L/s)

81

122

162

183

203

223

243

284

325

Pt (Pa)

10

14

20

22

23

30

37

55

75

NC

<15

<15

17

21

25

29

32

39

45

Q (L/s)

61

92

123

138

153

169

184

215

245

Pt (Pa)

10

14

20

22

23

30

37

55

75

NC

<15

<15

16

20

24

28

32

37

43

Q (L/s)

77

116

155

174

193

213

232

271

309

Pt (Pa)

10

14

20

22

23

30

37

55

75

NC

<15

<15

17

22

26

30

33

38

45

Q (L/s)

93

140

187

210

233

257

280

327

373

Pt (Pa)

10

14

20

22

23

30

37

55

75

NC

<15

<15

17

22

27

31

34

40

46

Q (L/s)

77

116

155

174

193

213

232

271

309

Pt (Pa)

10

14

20

22

23

30

37

55

75

NC

<15

<15

17

22

26

30

33

38

45

Q (L/s)

109

164

219

246

273

300

328

382

437

Pt (Pa)

10

14

20

22

23

30

37

55

75

NC

<15

15

18

23

27

31

35

41

46

Q (L/s)

125

188

250

282

313

344

376

438

501

Pt (Pa)

10

14

20

22

23

30

37

55

75

NC

<15

16

19

24

28

32

36

42

47

Q (L/s)

105

157

209

235

261

287

314

366

418

Pt (Pa)

10

14

20

22

23

30

37

55

75

NC

<15

15

18

23

27

31

34

40

46

Q (L/s)

126

189

252

284

315

347

378

442

505

Pt (Pa)

10

14

20

22

23

30

37

55

75

NC

<15

15

19

24

28

32

36

42

47

Contd...
F-15

CEILLING DIFFUSERS
A I R

D I S T R I B U T I O N

S P E C I A L I S T

RETURN AIR CEILING DIFFUSER, 4 WAY SIZE

(mmxmm)

525x300

600x300

450x375

525x375

600x375

525x450

600x450

600x525

NECK
AREA
(m2)
0.148

0.169

0.159

0.186

0.213

0.225

0.258

0.302

(RCD - 4R)

SI - UNITS

NECK
VELOCITY
(m/s)

1.00

1.50

2.00

2.25

2.50

2.75

3.00

3.50

4.00

Q (L/s)

148

222

295

332

369

406

443

517

591

Pt (Pa)

10

14

20

22

23

30

37

55

75

NC

<15

16

20

25

29

33

37

42

48

Q (L/s)

169

254

339

381

423

466

508

593

677

Pt (Pa)

10

14

20

22

23

30

37

55

75

NC

15

18

21

26

30

34

37

43

49

Q (L/s)

159

238

318

358

397

437

477

556

636

Pt (Pa)

10

14

20

22

23

30

37

55

75

NC

15

17

20

25

29

33

37

43

49

Q (L/s)

186

279

372

419

466

512

559

652

745

Pt (Pa)

10

14

20

22

23

30

37

55

75

NC

16

18

21

26

31

35

38

44

50

Q (L/s)

213

320

427

480

534

587

640

747

854

Pt (Pa)

10

14

20

22

23

30

37

55

75

NC

17

18

22

27

32

36

39

45

51

Q (L/s)

225

337

449

506

562

618

674

786

899

Pt (Pa)

10

14

20

22

23

30

37

55

75

NC

17

19

22

27

32

36

39

45

51

Q (L/s)

258

386

515

579

644

708

773

901

1030

Pt (Pa)

10

14

20

22

23

30

37

55

75

NC

18

20

23

28

33

37

40

46

52

Q (L/s)

302

452

603

679

754

830

905

1056

1207

Pt (Pa)

10

14

20

22

23

30

37

55

75

NC

18

21

24

29

34

38

41

47

53

See notes on page F-9

F-16

Rev. 0:2005/1

CEILING DIFFUSERS
A I R

D I S T R I B U T I O N

S P E C I A L I S T

PERFORMANCE DATA - IP UNITS

SYMBOLS
CFM :Air volume in cubic feet per minute.
Af
:Effective free area in square feet.
Vf
:Face velocity in feet per minute.
Ak
:Neck area in square feet.
Vk
:Neck velocity in feet per minute.
Pt
:Total pressure in inches water gauge.
Th.
:Throw in feet
NC
:Noise Criteria.

CONDITIONS
Supply or Return as indicated.
Noise Criteria values are based on (10 dB) room
attenuation.
Damper is fully open.
Maximum room height = 4.0m
Cooling @ T = 10K

NOTES
The large throw values are based on the minimum
terminal velocity of 50 fpm.
The middle throw values are based on the medium
terminal velocity of 100 fpm.
The small throw values are based on the maximum
terminal velocity of 150 fpm.

CORRECTION FOR 1, 2 AND 3 WAY

Noise criteria : No correction required.
Pressure
: No correction required.
Throw
: 3 way - increase for 15%
: 2 way - increase for 25%
: 1 way - increase for 45%
Drop
: No correction required.

Notes:

Rev. 0:2005/1

F-17

CEILLING DIFFUSERS
A I R

D I S T R I B U T I O N

S P E C I A L I S T

SUPPLY AIR CEILING DIFFUSER, 4 WAY SIZE

(in x in)

6x6

9x9

12x12

15x15

18x18

21x21

24x24

NECK FREE
NECK
AREA AREA
VELOCITY (fpm)
(SQ.FT.) (SQ.FT.)
Q (CFM)
Vf (fpm)
Pt (in-wg)
0.205
0.096
Throw (ft)
NC
Q (CFM)
Vf (fpm)
Pt (in-wg)
0.495
0.221
Throw (ft)
NC
Q (CFM)
Vf (fpm)
Pt (in-wg)
0.893
0.390
Throw (ft)
NC
Q (CFM)
Vf (fpm)
Pt (in-wg)
1.418
0.595
Throw (ft)
NC
Q (CFM)
Vf (fpm)
Pt (in-wg)
2.065
0.832
Throw (ft)
NC
Q (CFM)
Vf (fpm)
Pt (in-wg)
2.833
1.095
Throw (ft)
NC
Q (CFM)
Vf (fpm)
Pt (in-wg)
3.722
1.376
Throw (ft)
NC

See notes on page F-17

Rev. 0:2005/1

(SCD - 4S)

200
40
426
0.014
3
4
<15
98
441
0.008
4
7
<15
176
458
0.010
6
9
<15
279
476
0.010
8
12
<15
407
496
0.010
9
14
<15
558
517
0.010
11 15
<15
733
541
0.010
12 19
<15

12

18

23

12

27

14

31

16

35

18

IP - UNITS

300

400

450

500

550

600

700

800

61
638
0.030
6
<15
146
662
0.014
11
<15
264
687
0.015
13
<15
419
714
0.015
17
<15
610
744
0.015
20
<15
837
776
0.015
24
16
1099
811
0.015
27
19

81
851
0.054
9
<15
195
882
0.036
12
<15
352
916
0.032
18
<15
559
952
0.032
23
18
813
992
0.032
27
22
1116
1034
0.036
31
25
1466
1081
0.036
36
29

91
957
0.069
10
<15
219
993
0.043
13
16
396
1031
0.045
19
17
629
1071
0.045
25
23
915
1116
0.045
29
28
1255
1164
0.050
34
31
1649
1216
0.050
39
35

101
1064
0.083
11
<15
244
1103
0.055
13
17
440
1145
0.058
21
19
698
1190
0.058
27
28
1017
1240
0.058
31
34
1395
1293
0.063
36
37
1832
1351
0.063
42
40

111
1170
0.118
11
17
268
1213
0.072
15
20
484
1260
0.074
22
22
768
1310
0.074
28
32
1118
1364
0.074
33
37
1534
1422
0.082
38
40
2016
1486
0.082
44
43

121
1277
0.152
12
19
293
1324
0.080
18
22
528
1374
0.090
24
25
838
1429
0.090
30
35
1220
1488
0.090
34
39
1674
1552
0.100
40
42
2199
1622
0.100
46
45

141
1489
0.164
13
22
341
1544
0.123
20
28
615
1603
0.129
26
32
978
1667
0.129
31
41
1423
1736
0.129
37
44
1953
1810
0.143
43
47
2565
1892
0.143
50
50

161
1702
0.209
14
24
390
1765
0.168
21
33
703
1832
0.174
27
36
1117
1905
0.174
33
45
1627
1983
0.174
53
48
2232
2069
0.196
46
51
2932
2162
0.196
53
53

11

18

24

12

30

16

34

19

40

22

46

25

14

19

27

13

33

17

39

20

46

24

53

27

15

19

10

28

15

35

19

42

22

49

26

56

30

16

20

12

30

16

37

21

44

24

52

29

59

33

16

23

14

31

18

40

23

47

27

55

31

63

36

16

10

26

16

32

21

42

26

50

31

58

35

66

40

18

11

28

17

35

23

45

28

53

40

62

38

71

44

18

31

37

49

58

68

78

Contd...
F-18

CEILLING DIFFUSERS
A I R

D I S T R I B U T I O N

S P E C I A L I S T

SUPPLY AIR CEILING DIFFUSER, 4 WAY SIZE

(in x in)

9x6

12x6

15x6

18x6

21x6

24x6

12x9

NECK FREE
NECK
AREA AREA
VELOCITY (fpm)
(SQ.FT.) (SQ.FT.)
Q (CFM)
Vf (fpm)
Pt (in-wg)
0.316
0.146
Throw (ft)
NC
Q (CFM)
Vf (fpm)
Pt (in-wg)
0.428
0.194
Throw (ft)
NC
Q (CFM)
Vf (fpm)
Pt (in-wg)
0.539
0.240
Throw (ft)
NC
Q (CFM)
Vf (fpm)
Pt (in-wg)
0.651
0.285
Throw (ft)
NC
Q (CFM)
Vf (fpm)
Pt (in-wg)
0.762
0.328
Throw (ft)
NC
Q (CFM)
Vf (fpm)
Pt (in-wg)
0.874
0.369
Throw (ft)
NC
Q (CFM)
Vf (fpm)
Pt (in-wg)
0.660
0.294
Throw (ft)
NC

See notes on page F-17

Rev. 0:2005/1

(SCD - 4R)

IP - UNITS

200

300

400

450

500

550

600

700

800

62
433
0.008
6
<15
84
441
0.008
7
<15
106
449
0.010
8
<15
128
457
0.010
9
<15
150
465
0.010
9
<15
172
473
0.010
9
<15
130
449
0.010
9
<15

93
650
0.014
8
<15
126
661
0.014
10
<15
159
673
0.014
11
<15
192
685
0.014
12
<15
225
697
0.014
13
<15
258
709
0.014
14
<15
195
674
0.014
12
<15

125
866
0.029
11
<15
169
882
0.031
12
<15
212
897
0.037
15
<15
256
913
0.037
16
<15
300
929
0.037
16
<15
344
946
0.037
19
<15
260
899
0.037
16
<15

140
975
0.049
12
<15
190
992
0.043
13
15
239
1010
0.052
16
15
288
1028
0.052
17
15
338
1046
0.052
17
15
387
1064
0.052
20
16
293
1011
0.052
17
15

156
1083
0.069
13
<15
211
1102
0.055
14
16
265
1122
0.066
17
16
320
1142
0.066
18
16
375
1162
0.066
18
16
430
1182
0.066
22
17
325
1123
0.066
18
16

171
1191
0.094
14
17
232
1212
0.087
15
19
292
1234
0.085
18
19
352
1256
0.085
19
20
413
1278
0.085
19
20
473
1300
0.085
23
21
358
1236
0.085
19
20

187
1299
0.118
15
20
253
1323
0.119
16
21
319
1346
0.104
19
22
384
1370
0.104
20
23
450
1394
0.104
20
23
516
1419
0.104
25
24
390
1348
0.104
20
23

218
1516
0.152
17
26
295
1543
0.152
18
27
372
1571
0.145
21
28
448
1598
0.145
23
29
525
1627
0.145
23
29
602
1655
0.145
27
30
455
1573
0.134
23
29

249
1733
0.207
18
30
337
1764
0.207
20
31
425
1795
0.199
24
32
513
1827
0.199
26
33
600
1859
0.199
26
33
688
1891
0.199
28
34
520
1797
0.170
26
33

11

14

14

15

16

10

18

10

15

14

16

19

11

20

12

23

12

25

13

20

12

17

19

10

23

12

25

13

27

13

28

14

25

13

18

10

20

11

24

13

26

14

28

14

29

16

26

14

20

11

22

12

25

14

27

15

29

15

31

17

27

15

21

12

23

13

26

15

28

16

30

17

32

19

28

16

22

14

24

15

27

17

30

18

31

19

33

22

30

18

24

15

26

17

29

20

32

21

33

21

36

24

32

21

25

28

32

36

36

38

36

Contd...
F-19

CEILLING DIFFUSERS
A I R

D I S T R I B U T I O N

S P E C I A L I S T

SUPPLY AIR CEILING DIFFUSER, 4 WAY SIZE

(in x in)

15x9

18x9

21x9

24x9

15x12

18x12

21x12

NECK FREE
NECK
AREA AREA
VELOCITY (fpm)
(SQ.FT.) (SQ.FT.)
Q (CFM)
Vf (fpm)
Pt (in-wg)
0.832
0.363
Throw (ft)
NC
Q (CFM)
Vf (fpm)
Pt (in-wg)
1.004
0.431
Throw (ft)
NC
Q (CFM)
Vf (fpm)
Pt (in-wg)
1.176
0.495
Throw (ft)
NC
Q (CFM)
Vf (fpm)
Pt (in-wg)
1.348
0.558
Throw (ft)
NC
Q (CFM)
Vf (fpm)
Pt (in-wg)
1.125
0.482
Throw (ft)
NC
Q (CFM)
Vf (fpm)
Pt (in-wg)
1.358
0.570
Throw (ft)
NC
Q (CFM)
Vf (fpm)
Pt (in-wg)
1.590
0.656
Throw (ft)
NC

See notes on page F-17

Rev. 0:2005/1

(SCD - 4R)

IP - UNITS

200

300

400

450

500

550

600

700

800

164
458
0.010
9
<15
198
466
0.010
11
<15
232
475
0.010
10
<15
266
483
0.010
10
<15
222
467
0.010
11
<15
267
476
0.010
10
<15
313
485
0.010
12
<15

246
687
0.014
13
<15
297
699
0.014
14
<15
347
712
0.014
16
<15
398
725
0.014
17
<15
332
700
0.014
15
<15
401
714
0.014
16
<15
470
727
0.014
18
<15

328
915
0.037
17
17
396
932
0.037
20
<15
463
949
0.037
20
<15
531
967
0.037
20
<15
443
934
0.037
21
<15
535
952
0.037
19
<15
626
970
0.037
25
<15

369
1030
0.052
18
21
445
1049
0.052
21
16
521
1068
0.052
21
16
597
1088
0.052
21
17
499
1050
0.052
22
17
602
1071
0.052
20
17
705
1091
0.052
26
17

410
1144
0.066
19
24
494
1165
0.066
23
18
579
1187
0.066
22
18
664
1208
0.066
23
19
554
1167
0.066
23
19
669
1190
0.066
22
20
783
1212
0.066
28
20

451
1259
0.085
20
27
544
1282
0.085
24
22
637
1305
0.085
23
22
730
1329
0.085
24
23
609
1284
0.085
24
23
735
1308
0.085
23
24
861
1334
0.085
29
24

492
1373
0.104
21
30
593
1398
0.104
25
25
695
1424
0.104
25
25
797
1450
0.104
25
26
665
1401
0.104
26
26
802
1427
0.104
24
27
940
1455
0.104
31
27

574
1602
0.134
23
34
692
1631
0.145
27
31
811
1661
0.145
28
31
929
1692
0.145
29
32
776
1634
0.145
28
32
936
1665
0.145
28
33
1096
1697
0.145
32
33

656
1831
0.170
26
38
791
1865
0.199
29
35
927
1899
0.199
30
35
1062
1933
0.199
30
36
887
1867
0.199
31
36
1070
1903
0.199
29
37
1253
1940
0.199
35
37

15

20

10

20

10

20

11

22

10

20

11

25

12

23

12

25

14

25

14

25

15

25

15

24

14

31

17

26

18

30

15

29

15

29

16

30

16

28

15

34

19

27

24

31

17

30

17

30

18

31

18

29

17

37

21

29

20

31

18

31

18

31

19

32

19

30

18

40

23

30

17

33

20

31

20

32

21

33

21

31

20

42

25

31

19

34

22

32

23

33

23

34

23

32

23

43

27

34

22

36

24

36

24

36

25

36

25

35

24

47

30

37

39

42

42

41

40

51

Contd...
F-20

CEILLING DIFFUSERS
A I R

D I S T R I B U T I O N

S P E C I A L I S T

SUPPLY AIR CEILING DIFFUSER, 4 WAY SIZE

(in x in)

24x12

18x15

21x15

24x15

21x18

24x18

24x21

NECK FREE
NECK
AREA AREA
VELOCITY (fpm)
(SQ.FT.) (SQ.FT.)
Q (CFM)
Vf (fpm)
Pt (in-wg)
1.823
0.737
Throw (ft)
NC
Q (CFM)
Vf (fpm)
Pt (in-wg)
1.712
0.709
Throw (ft)
NC
Q (CFM)
Vf (fpm)
Pt (in-wg)
2.005
0.809
Throw (ft)
NC
Q (CFM)
Vf (fpm)
Pt (in-wg)
2.298
0.909
Throw (ft)
NC
Q (CFM)
Vf (fpm)
Pt (in-wg)
2.419
0.955
Throw (ft)
NC
Q (CFM)
Vf (fpm)
Pt (in-wg)
2.772
1.072
Throw (ft)
NC
Q (CFM)
Vf (fpm)
Pt (in-wg)
3.247
1.228
Throw (ft)
NC

(SCD - 4R)

200
359
494
0.010
8
11
<15
337
485
0.010
8
11
<15
395
495
0.010
9
13
<15
453
505
0.010
9
15
<15
476
506
0.010
8
14
<15
546
517
0.010
11 16
<15
639
529
0.010
11 17
<15

24

13

24

13

26

13

29

14

26

14

31

16

32

18

IP - UNITS

300

400

450

500

550

600

700

800

539
741
0.014
20
<15
505
720
0.014
20
<15
592
743
0.014
21
<15
679
758
0.014
21
<15
715
759
0.014
20
<15
819
775
0.014
24
<15
959
793
0.015
26
<15

718
988
0.037
26
<15
675
971
0.037
26
<15
790
991
0.037
27
<15
905
1011
0.037
29
<15
953
1012
0.037
28
<15
1092
1034
0.037
31
<15
1279
1057
0.036
33
15

808
1112
0.052
27
18
758
1093
0.052
27
18
888
1115
0.052
28
18
1018
1137
0.052
31
18
1072
1139
0.052
29
18
1228
1163
0.052
34
19
1439
1189
0.050
36
20

898
1235
0.066
29
21
843
1215
0.066
29
21
987
1239
0.066
30
21
1131
1263
0.066
32
22
1191
1266
0.066
31
22
1365
1292
0.066
36
23
1599
1321
0.063
38
24

987
1359
0.085
30
25
928
1334
0.085
30
25
1086
1362
0.085
31
25
1244
1390
0.085
34
26
1310
1392
0.085
32
26
1501
1421
0.085
39
27
1759
1453
0.082
40
28

1077
1483
0.104
31
28
1010
1456
0.104
31
28
1184
1486
0.104
32
28
1358
1516
0.104
36
29
1429
1519
0.104
34
29
1638
1550
0.104
41
30
1918
1586
0.100
41
31

1257
1730
0.145
34
34
1180
1699
0.145
34
34
1382
1734
0.145
35
34
1584
1769
0.145
51
35
1667
1772
0.145
50
36
1911
1809
0.145
45
36
2238
1850
0.143
44
37

1436
1977
0.199
37
38
1348
1943
0.199
37
38
1579
1982
0.199
38
38
1810
2021
0.199
54
39
1905
2025
0.199
55
39
2184
2067
0.199
48
40
2558
2114
0.196
48
41

31

19

31

19

31

20

35

20

34

19

40

22

41

23

37

21

37

21

39

22

41

22

41

21

46

25

48

26

40

23

40

23

41

24

44

24

43

23

49

28

52

29

42

24

42

24

43

25

46

27

44

26

51

30

55

31

44

26

44

26

45

26

49

30

47

29

55

32

57

34

46

28

46

28

47

28

52

39

49

39

58

36

59

37

50

30

50

30

52

31

56

42

56

44

60

40

65

40

55

55

58

60

62

67

71

See notes on page F-17

Rev. 0:2005/1

F-21

CEILLING DIFFUSERS
A I R

D I S T R I B U T I O N

S P E C I A L I S T

RETURN AIR CEILING DIFFUSER, 4 WAY SIZE

(in x in)

6x6
9x9
12x12
15x15
18x18
21x21
24x24

NECK
AREA
(SQ.FT.)
0.205

0.488

0.893

1.418

2.065

2.833

3.722

See notes on page F-17

F-22

(RCD - 4S)

IP - UNITS

NECK
VELOCITY
(fpm)

200

300

400

450

500

550

600

700

800

Q (CFM)

40

61

81

91

101

111

121

141

161

Pt (in-wg)

0.032

0.048

0.072

0.078

0.084

0.090

0.095

0.141

0.181

NC

<15

<15

<15

<15

<15

15

15

21

25

Q (CFM)

96

144

192

216

240

265

289

337

385

Pt (in-wg)

0.040

0.056

0.080

0.086

0.092

0.120

0.149

0.221

0.301

NC

<15

<15

<15

18

22

26

30

36

41

Q (CFM)

176

264

352

396

440

484

528

615

703

Pt (in-wg)

0.040

0.056

0.080

0.086

0.092

0.120

0.149

0.221

0.301

NC

<15

<15

16

21

26

30

33

39

45

Q (CFM)

279

419

559

629

698

768

838

978

1117

Pt (in-wg)

0.040

0.056

0.080

0.086

0.092

0.120

0.149

0.221

0.301

NC

<15

15

19

24

28

32

36

42

47

Q (CFM)

407

610

813

915

1017

1118

1220

1423

1627

Pt (in-wg)

0.040

0.056

0.080

0.086

0.092

0.120

0.149

0.221

0.301

NC

16

18

21

26

31

35

38

44

50

Q (CFM)

558

837

1116

1255

1395

1534

1674

1953

2232

Pt (in-wg)

0.040

0.056

0.080

0.086

0.092

0.120

0.149

0.221

0.301

NC

18

21

23

28

33

37

40

46

52

Q (CFM)

733

1099

1466

1648

1832

2015

2199

2565

2932

Pt (in-wg)

0.040

0.056

0.080

0.086

0.092

0.120

0.149

0.221

0.301

NC

19

22

24

29

34

38

42

48

53

Contd...

Rev. 0:2005/1

CEILLING DIFFUSERS
A I R

D I S T R I B U T I O N

S P E C I A L I S T

RETURN AIR CEILING DIFFUSER, 4 WAY SIZE

(in x in)

9x6
12x6
15x6
18x6
21x6
24x6
12x9
15x9
18x9
21x9
24x9
15x12
18x12
21x12

NECK
AREA
(SQ.FT.)
0.316

0.428

0.539

0.651

0.762

0.874

0.660

0.832

1.004

1.176

1.348

1.129

1.358

1.590

See notes on page F-17

Rev. 0:2005/1

(RCD - 4R)

IP - UNITS

NECK
VELOCITY
(fpm)

200

300

400

450

500

550

600

700

800

Q (CFM)

62

93

125

140

156

171

187

218

249

Pt (in-wg)

0.040

0.056

0.080

0.086

0.092

0.120

0.149

0.221

0.301

NC

<15

<15

<15

17

19

24

28

33

38

Q (CFM)

84

126

169

190

211

232

253

295

337

Pt (in-wg)

0.040

0.056

0.080

0.086

0.092

0.120

0.149

0.221

0.301

NC

<15

<15

<15

18

21

25

29

34

40

Q (CFM)

106

159

212

239

265

292

319

372

425

Pt (in-wg)

0.040

0.056

0.080

0.086

0.092

0.120

0.149

0.221

0.301

NC

<15

<15

<15

19

23

27

31

36

42

Q (CFM)

128

192

256

288

320

352

384

448

513

Pt (in-wg)

0.040

0.056

0.080

0.086

0.092

0.120

0.149

0.221

0.301

NC

<15

<15

16

20

24

28

32

37

43

Q (CFM)

150

225

300

338

375

413

450

525

600

Pt (in-wg)

0.040

0.056

0.080

0.086

0.092

0.120

0.149

0.221

0.301

NC

<15

<15

16

21

25

29

33

38

44

Q (CFM)

172

258

344

387

430

473

516

602

688

Pt (in-wg)

0.040

0.056

0.080

0.086

0.092

0.120

0.149

0.221

0.301

NC

<15

<15

17

21

25

29

32

39

45

Q (CFM)

130

195

260

293

325

358

390

455

520

Pt (in-wg)

0.040

0.056

0.080

0.086

0.092

0.120

0.149

0.221

0.301

NC

<15

<15

16

20

24

28

32

37

43

Q (CFM)

164

246

328

369

410

451

492

574

656

Pt (in-wg)

0.040

0.056

0.080

0.086

0.092

0.120

0.149

0.221

0.301

NC

<15

<15

17

22

26

30

33

38

45

Q (CFM)

198

297

396

445

494

544

593

692

791

Pt (in-wg)

0.040

0.056

0.080

0.086

0.092

0.120

0.149

0.221

0.301

NC

<15

<15

17

22

27

31

34

40

46

Q (CFM)

232

347

463

521

579

637

695

811

927

Pt (in-wg)

0.040

0.056

0.080

0.086

0.092

0.120

0.149

0.221

0.301

NC

<15

15

18

23

27

31

35

41

46

Q (CFM)

266

398

531

597

664

730

797

929

1062

Pt (in-wg)

0.040

0.056

0.080

0.086

0.092

0.120

0.149

0.221

0.301

NC

<15

16

19

24

28

32

36

42

47

Q (CFM)

222

332

442

498

553

608

665

775

885

Pt (in-wg)

0.040

0.056

0.080

0.086

0.092

0.120

0.149

0.221

0.301

NC

<15

15

18

23

27

31

34

40

46

Q (CFM)

267

401

535

602

669

735

802

936

1070

Pt (in-wg)

0.040

0.056

0.080

0.086

0.092

0.120

0.149

0.221

0.301

NC

<15

15

19

24

28

32

36

42

47

Q (CFM)

313

470

626

705

783

861

940

1096

1253

Pt (in-wg)

0.040

0.056

0.080

0.086

0.092

0.120

0.149

0.221

0.301

NC

<15

16

20

25

29

33

37

42

48

Contd...
F-23

CEILLING DIFFUSERS
A I R

D I S T R I B U T I O N

S P E C I A L I S T

RETURN AIR CEILING DIFFUSER, 4 WAY SIZE

(in x in)

24x12
18x15
21x15
24x15
21x18
24x18
24x21

NECK
AREA
(SQ.FT.)
1.823

1.712

2.005

2.298

2.419

2.772

3.247

(RCD - 4R)

IP - UNITS

NECK
VELOCITY
(fpm)

200

300

400

450

500

550

600

700

800

Q (CFM)

359

539

718

808

898

987

1077

1257

1436

Pt (in-wg)

0.040

0.056

0.080

0.086

0.092

0.120

0.149

0.221

0.301

NC

15

18

21

26

30

34

37

43

49

Q (CFM)

337

506

674

758

843

927

1011

1180

1348

Pt (in-wg)

0.040

0.056

0.080

0.086

0.092

0.120

0.149

0.221

0.301

NC

15

17

20

25

29

33

37

43

49

Q (CFM)

395

592

790

887

987

1085

1184

1382

1579

Pt (in-wg)

0.040

0.056

0.080

0.086

0.092

0.120

0.149

0.221

0.301

NC

16

18

21

26

31

35

38

44

50

Q (CFM)

453

679

905

1018

1131

1243

1358

1584

1810

Pt (in-wg)

0.040

0.056

0.080

0.086

0.092

0.120

0.149

0.221

0.301

NC

17

18

22

27

32

36

39

45

51

Q (CFM)

476

715

953

1072

1191

1309

1429

1667

1905

Pt (in-wg)

0.040

0.056

0.080

0.086

0.092

0.120

0.149

0.221

0.301

NC

17

19

22

27

32

36

39

45

51

Q (CFM)

546

819

1092

1227

1365

1501

1638

1911

2184

Pt (in-wg)

0.040

0.056

0.080

0.086

0.092

0.120

0.149

0.221

0.301

NC

18

20

23

28

33

37

40

46

52

Q (CFM)

639

959

1279

1438

1599

1759

1918

2238

2558

Pt (in-wg)

0.040

0.056

0.080

0.086

0.092

0.120

0.149

0.221

0.301

NC

18

21

24

29

34

38

41

47

53

See notes on page F-17

F-24

Rev. 0:2005/1