Scribd
Upload
352 views2 pages

Airflow Around A Bullet

The document discusses airflow around supersonic bullets based on shadowgraph photos. It notes that a strong bow shock wave is created off the nose due to the sudden discontinuity encountered by supersonic air. Along the body are compression and expansion waves - compression waves occur where cross-sectional area increases and expansion waves where it decreases. Far behind the bullet a turbulent wake is visible due to the very low pressure region.

Uploaded by

rav_ranjan
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
352 views2 pages

Airflow Around A Bullet

The document discusses airflow around supersonic bullets based on shadowgraph photos. It notes that a strong bow shock wave is created off the nose due to the sudden discontinuity encountered by supersonic air. Along the body are compression and expansion waves - compression waves occur where cross-sectional area increases and expansion waves where it decreases. Far behind the bullet a turbulent wake is visible due to the very low pressure region.

Uploaded by

rav_ranjan
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

16. I would like to know what the airflow around a bullet in a wind tunnel would look like.

Could you provide any pictures? One of the classic pictures seen in any college class on compressible, or supersonic, aerodynamics is the flow around a bullet. An example of such a photo is shown below.

Shadowgraph of a supersonic bullet

Based on this photo, we can get some idea of the basic phenomenon that occur on a body traveling at supersonic speeds. Most notable is the strong shock wave that is created off of the nose of the bullet. This sort of shock wave is referred to as a bow shock, and it is so strong because the nose creates such a sudden discontinuity as the supersonic air flow encounters it. We also see a series of lines similar to shock waves that emanate from different regions along the body. These are compression and expansion waves. A compression wave is created when the cross-sectional area of the body increases, because the flow is squeezed into a smaller area and "compressed." If the compression is strong enough, this squeezing of the flow will result in a shock wave. For example, a series of compression waves can be seen near the middle of the above bullet. They form a large blurred region close to the bullet's surface but merge further out into a single line, indicating that they have merged to form a shock wave. An expansion wave, on the other hand, is created when the cross-sectional area of the body decreases, because the flow can expand into a larger region. The flow is said to "fan out," which is why a series of expansion waves is often referred to as an expansion fan. Expansion fans can be seen in the above image towards the aft end of the bullet. Far outboard of the aft end of the bullet can also be seen two strong lines indicating a trailing shock. In addition, a region of very low pressure exists aft of the blunt bullet base

giving rise to the turbulent wake we see trailing behind the bullet. A closer view exemplifying supersonic waves and wakes can be seen below.

Shadowgraph of a supersonic bullet

We see similar phenomenon on aircraft traveling at supersonic speeds. A strong bow shock is generated off the nosecone and another strong shock wave is created off the aft end of the aircraft. If you've ever heard an aircraft traveling at Mach 1 or faster, you'll note that you don't hear just one sonic boom, but two booms in rapid succesion. This "ba-boom" sound is actually the twin bow and trailing shock waves coming off the nose and tail of the plane. In addition, shock waves form off of any sudden discontinuities or changes in the shape of the vehicle. This concept of a "discontinuous" distribution in the cross-sectional area of a body is a key principal in the Area Rule. This rule relates to how discontinuities in the shape of an aircraft create drag.

You might also like