NIC Components NRSZ Series
NIC Components NRSZ Series
CHARACTERISTICS
LOW IMPEDANCE
Rated Voltage Range 6.3 ~ 100VDC
Capacitance Range 0.47 ~ 12,000μF NRSZ NRSY
Operating Temperature Range -55 ~ +105°C (today’s standard) (reduced sizes)
Capacitance Tolerance ±20% (M)
After 1 min. 0.03CV or 4μA, whichever is greater
Max. Leakage Current @ 20°C
After 2 min. 0.01CV or 3μA, whichever is greater
W.V. (VDC) 6.3 10 16 25 35 50 63 100
S.V. (VDC) 8 13 20 32 44 63 79 125
C < 1,200μF 0.22 0.19 0.16 0.14 0.12 0.10 0.08 0.07
C = 1,500μF 0.23 0.20 0.17 0.15 0.13 0.11 - -
C = 1,800μF 0.23 0.20 0.17 0.15 0.13 0.11 - -
C = 2,200μF 0.24 0.21 0.18 0.16 0.14 - - -
C = 2,700μF 0.25 0.22 0.19 0.17 0.15 - - -
Max. Tanδ ~ 120Hz/20°C C = 3,300μF 0.26 0.23 0.20 0.18 0.16 - - -
C = 3,900μF 0.28 0.25 0.22 0.20 - - - -
C = 4,700μF 0.29 0.26 0.23 0.21 - - - -
C = 5,600μF 0.31 0.28 0.25 - - - - -
C = 6,800μF 0.33 0.30 0.27 - - - - -
C = 8,200μF 0.36 0.33 - - - - - -
C = 10,000μF 0.40 - - - - - - -
C = 12,000μF 0.44 - - - - - - -
Low Temperature Stability Z-25°C/Z+20°C 3 2 2 2 2 2 2 2
Impedance Ratio @ 120Hz Z-40°C/Z+20°C 4 3 3 3 3 3 3 3
Capacitance Change Within ±20% of initial measured value
Load Life Test at Rated W.V. & 105°C
(See Standard Products Tanδ Less than 200% of specified maximum value
and Specifications Tables)
Leakage Current Less than specified maximum value
Shelf Life Test Capacitance Change Within ±20% of initial measured value
105°C for 1,000 hours Tanδ Less than 200% of specified maximum value
No Load Leakage Current Less than specified maximum value
*NRSZ102M6.3V8X20 is 4,500 Hours @ 105°C
Unless otherwise specified here, capacitor shall meet JIS C-5141 Characteristics W.
PRECAUTIONS
Please review the notes on correct use, safety and precautions found on pages T10 & T11
of NIC’s Electrolytic Capacitor catalog.
Also found at www.niccomp.com/precautions
If in doubt or uncertainty, please review your specific application - process details with
NIC’s technical support personnel: [email protected]
W 11.5 min.
0
W1 9.0 ±0.5
W2 0 ~ 2.5 1max
H 16.0 ±0.5
0
I 1.0 max.
D φ 4.0 ±0.2
0
Δh 0 ±1.0 (at top of can)
t 0.7 ±0.2 (not including lead)
t
STANDARD RADIAL TAPING (5mm LEAD SPACING, STRAIGHT LEADS) TB
Taping Dimensions (mm)
Case Dia.
10 12.5
(Dφ)
Case Size Δh
All All
Dim.
dφ ±0.05 0.6 0.6
H ±0.75 19.0 19.0
F +0.8 ~ -0.2 5.0 5.0
P ±1.0 25.4* 1max
P0 12.7 ±0.2
P1 3.85
P 6.35 ±1.0
2
W 18.0 ±0.5
W0 11.5 min
W
1
9.0 ±0.5 P2 t P
W 0 ~ 2.5
2
H
0 16.0 ±0.5 ∅D
I 1.0 max.
D φ 4.0 ±0.2 w2 P1
0 F ∅d H
Δh 0 ±1.0 (at top of can)
W1
t 0.7 ±0.2 (not including lead) w w0
*Optional Taping Specifications
10mm diameter available with P dim. = 12.7mm
(P/N Suffix: TB12.7MMP)
0
P0 S ∅ D0
12.5mm diameter available with P dim. = 15mm, P1= 5.0mm,
P0 = 15.0mm & P2 = 7.5mm (P/N Suffix: TB15MMP)