ELECTRONIC DEVICES AND CIRCUITS FINAL PROJECT

The final project for EC333L1 is to design and construct a DUAL fixed/variable voltage Power Supply. This power supply will accept standard wall outlet voltage (220V, 60Hz) and output two sets of DC voltages, capable of supplying 1A/2A of current:

Fixed (3 OUTPUT)V Variable 0-30V

It will be comprised of pure solid state devices and optional to use an IC regulator. Dates Aug. 28st: Sept. 4th, 11th: Sept. 18th, 25th: Oct. 2nd: Oct. 9th: Grading Grading will be done on a 100 percent scale with the following weighting: Clear Schematic design: Results and discussion: Assembling Functionality and working power supply: Following Project Requirements and fineness of work: Project Presentation Project Report document 10% 20% 20% 10% 10% 20% 10% Project proposal deadline (This will include Chapter 1 and the Schematic Diagram) Project Making in Laboratory Class Last day(s) of Project Making in Laboratory Class, project will be returned to the students Free day (we will not meet this day) to give you ample time to finish the project Power Supply presentation and report deadline

The final project is equivalent to fifty percent (50%) of your final exam. Presentation All power supplies must be presented to Engr. Ablidas together with the panel to gain credit. You will not be submitting the actual power supply, only the report, but we will evaluate your power supply at the time of presentation, no later than Oct. 9th. Aesthetics Part of the grade will be based on the user friendliness and aesthetics of the power supply. Try to make it look as professional as possible. Extra Credit If you wish to add extra features to your power supply such as voltmeters, 7-segment displays, cooling fans, whateveryou-can-think-of, extra credit will be given. The amount of extra credit will be on a case-to-case basis.

FORMAT FOR PREPARATION OF PROJECT REPORT

DOCUMENT INSTRUCTIONS:
1. The project report must be submitted in two copies (one copy for grading and one for department) duly signed by the instructor. 2. The length of the report may be about 20 to 30 pages. 3. The project report shall be computerized (English, Font Arial Narrow, Size-12 point) and printed on A4 size paper. 4. The project report shall be compiled with a transparent cover folder in assigned section color. 5. The project report shall be typed with double line spacing with a margin 1.5 inches on the left and 1 inch on the top, right and at bottom. Every page in the project report must be numbered. The page numbering, starting from acknowledgements and till the beginning of the introductory chapter, should be printed in small Roman numbers, i.e, i, ii, iii, iv... All page numbers starting from the introductory chapter should be printed using Arabic numerals, i.e. 1,2,3,4,5... All printed page numbers should be located at the bottom right of the page. 6. In the project report, the title page should be set first followed by the preliminary part: acknowledgement page and abstract of the report (not exceeding one page) and so on. 7. The table of contents should list all headings and sub headings. The title page will not find a place among the items listed in the Table of Contents. One and a half spacing should be adopted for typing

the matter under this head. 8. The list of tables should use exactly the same captions as they appear above the tables in the text. One and a half spacing should be adopted for typing the matter under this head. 9. The list of figures should use exactly the same captions as they appear below the figures in the text. One and a half spacing should be adopted for typing the matter under this head. 10. The list of abbreviation and symbols should be typed with one and a half line spacing. Standard symbols, abbreviation etc should be used. 11. Project report consists of following chapters. a. Chapter 1b. Chapter 2c. Chapter 3d. Chapter 4e. Chapter 5Introduction Literature Review Methodology Results and Interpretations Conclusion and Recommendations

12. The listing of references should be typed 4 spaces below the heading REFERENCES in alphabetical order in single spacing left justified. The reference material should be listed in the alphabetical order of the surname of the first author. The name of the author(s) should be immediately followed by the year and other details. 13.Appendices are provided to give supplementary information, which is included in the main text may serve as a distraction and cloud the central theme. Appendices should be numbered using the alphabet, e.g. Appendix A, Appendix B, etc. 14.Curriculum Vitae should contain personal information, educational background and seminars attended of each of the group members.

SAMPLE SHEET (TITLE PAGE)

TECHNOLOGICAL INSTITUTE OF THE PHILIPPINES (14, Bold)

College of Engineering and Architecture (12, Bold) Department of Computer Engineering (12,Bold)

DUAL FIXED/VARIABLE POWER SUPPLY PROJECT (14, Bold)

In Partial Fulfillment of the Requirements for the completion of the course Electronic Devices and Circuits (EC333L1) (12)

Submitted by: Group member 1 Student ID No. Group member 2 0410318 Group member 3 0410318 Group member 4 0410318 Group member 5 0410318 (12) Submitted to: Engr. Lhora Anne M. Ablidas Instructor (12) October 1, 2013 Date (12)

SAMPLE SHEET

TABLE OF CONTENTS
Page No.

Acknowledgement Abstract List of Tables

i
ii

iii
iv v
1

List of Abbreviations
Chapter 1 Introduction Overview. Project Background.. Objectives of the study General objective Specific objective. Significant of the project. Scope and Limitations..

1 2 3 3 3 3 4

Chapter 2. Literature Review Related Literature.. A. Literature 1 ..... B. Literature 2 ..... Definitions

5 13 13 14

Chapter 3. Methodology Technical Design Block diagram Stages of the Power Supply... Schematic diagram ...... ...... Components and Specification.. Picture of the Power Supply .. Flowchart..... Methods..

17

17 17 18 19 21 24 25 26

Chapter 4 . Results and Interpretation Simulation Results Actual Results.... Interpretation

27

27 30 32

Chapter 5.. Conclusion and Recommendations Conclusion....... Recommendations Costing and Commercialization

33

33 34 35

SAMPLE SHEET

List of Tables Table Title Page

3.1 4.1 5.1

Resistor Color Coding Values ................ Rectifier Test Results. .................................................................................... Costing of Project..................................................................

12 21 23

SAMPLE SHEET

List of Figures Figure

Title
Rectifier Circuit . ........................................................................... Picture of the Power Supply. .................................................................

Page
70 95

SAMPLE SHEET

Abbreviations
BJT LCD Bipolar Junction Transistor Liquid Crystal Display

SAMPLE SHEET(CV)

#23 P.Ocampo St., Project 4, Q.C. Tel. no.(02)4403819, Mobile no.09228841828 E-mail: [email protected] PERSONAL INFORMATION NICKNAME: lhora, ley DATE OF BIRTH: February 12, 1987 AGE: 22 PLACE OF BIRTH: Quezon City SEX: female WEIGHT: 119 lbs. HEIGHT: 5 feet 3 inches NATIONALITY: Filipino RELIGION: Roman Catholic EDUCATIONAL BACKGROUND 2004-Present TECHNOLOGICAL INSTITUTE OF THE PHIL. Q.C. #938 Aurora Blvd., Cubao, Quezon City Bachelor of Science in Electronics and Communications Engineering 2000-2004 IMMACULATE CONCEPTION CATHEDRAL SCHOOL #1 Michael St., Brgy. Immaculate Conception, Cubao, Q.C. Secondary Education 1994-2000 SAINT JOSEPH CATHEDRAL SCHOOL #36 Molave St., Project 3, Q.C. Elementary Education SEMINARS ATTENDED: 1ST ECE STUDENT SUMMIT ELECTRONICS ENGINEERING: TRENDS AND UPDATES DIGITAL MICROWAVE DESIGN BOARD REGULATORY FRAMEWORK IN TELECOMMUNICATIONS INDUSTRY INTRODUCTION TO MICROCONTROLLERS IECEP-EMMSC GENERAL ASSEMBLY 2007 AND A LECTURE SEMINAR ON INNOVATION INTRODUCTION TO PLC TECHNOLOGY USING SIEMENS LOGIC MODULE

MACAM, LHORA ANNE OSERO