Scribd
Upload
106 views

SP25M Compact Scanning Probe System

The SP25M is the world's most compact and versatile scanning system. It has unrivalled flexibility due to the system's modularity. Five scanning modules feature a pivoting design which delivers exceptional dynamic performance and optimised high accuracy performance. A range of stylus holders (SH25-2A / 3A / 4A) is now available to offer improved crank / non-straight stylus carrying on the existing module range.

Uploaded by

tomica06031969
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
106 views

SP25M Compact Scanning Probe System

The SP25M is the world's most compact and versatile scanning system. It has unrivalled flexibility due to the system's modularity. Five scanning modules feature a pivoting design which delivers exceptional dynamic performance and optimised high accuracy performance. A range of stylus holders (SH25-2A / 3A / 4A) is now available to offer improved crank / non-straight stylus carrying on the existing module range.

Uploaded by

tomica06031969
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Renishaw plc New Mills, Wotton-under-Edge, Gloucestershire, GL12 8JR United Kingdom

T +44 (0)1453 524524 F +44 (0)1453 524901 E [email protected] www.renishaw.com

SP25M - the worlds most compact and versatile scanning system


The SP25 family range of applications
The SP25M is two sensors in one, and has unrivalled flexibility due to the systems modularity. Users can scan for form, position, and size but also take high accuracy discrete points by using a dedicated scanning module or, alternatively, use an adaptor to carry Renishaws TP20 range of touchtrigger probe modules. The SP25Ms compact size and autojoint mounting makes it compatible with PH10M, PH10MQ and PH6M probe heads. It can also be mounted on an extension bar, providing excellent reach and access to part features. Five scanning modules feature a pivoting design which delivers exceptional dynamic performance and optimised high accuracy performance over the entire stylus range from 20 to 400 mm effective working length (EWL). This avoids most of the performance loss seen in other scanning probes as stylus length increases. A range of stylus holders (SH25-2A/3A/4A) is now available to offer improved crank/non-straight stylus carrying on the existing module range. For superior performance with crank/star/non-straight styli the use of the new SM25-5 module and SH25-5 stylus holder, based upon Renishaws SP600 and SP80 scanning technology, is recommended. Module and stylus changing is enabled using the FCR25 flexible change rack, which can be located either on the CMM bed, or in Renishaws MRS modular rack system.

Key benefits
Excellent part accessibility At just 25mm (0.97in) diameter, the SP25M is small and light, making it ideally suited to mounting on articulating heads and on extensions of up to 100mm (3.94in). Thus a total reach of some 600mm (23.62in) is possible. However, it is also sufficiently compact to suit very small CMMs and multisensor machines. Modularity to allow unrivalled flexibility The SP25M system allows the user to configure a basic installation which can be readily expanded at any time. Two sensors in one - scanning and touch-trigger SP25M allows the user to always select the most suitable measurement solution to match the application, either scanning or touch-trigger. Now you can efficiently do both with a single probe system!

Innovations
Isolated optical metrology A pivoting mechanism and isolated optical metrology system directly measures each axis of probe deflection. This avoids errors generated in stacked measurement axes, as used in tower scanning probes. Five scanning modules provide optimal performance across a range of stylus lengths Each scanning module has a spring rate and gain optimised for a range of stylus lengths. SP25M measures accurately with styli up to 400 mm (15.74in) long. 3rd order polynomial calibration Renishaw has developed sophisticated calibration methods for its range of scanning probes to ensure maximised performance. SP25M uses the most advanced of these methods.

Renishaw plc New Mills, Wotton-under-Edge, Gloucestershire, GL12 8JR United Kingdom

T +44 (0)1453 524524 F +44 (0)1453 524901 E [email protected] www.renishaw.com

Mounting

Renishaws autojoint: PH10M, PH10MQ or PH6 heads and may be mounted on 100mm autojoint extension bars Probe 25 mm (0.98 in) x length dependent dimensions upon module used Probe attributes 3 axis analogue measurement (X, Y, Z). Pivoting motion in XY plane with translation in Z. SM25-5 Plane translation in all 3 axes XYZ Measurement 0.5 mm (0.02 in) deflection in all range directions in all orientations SM25-5 0.3 mm Overtravel range X, Y = 2.0 mm (0.08 in) +Z = 1.7 mm (0.07 in) -Z = 1.2 mm (0.05 in) SM25-5 X, Y = 0.95 mm (0.037 in) +Z = 1.0 mm (0.039 in) -Z = 1.1 mm (0.043 in) Crash protection X, Y, -Z via break-off of either module or stylus holder +Z via integral bump-stop design Resolution <0.1 m (0.000004 in) with either UCC controller or AC3 interface card Spring rate ~0.2 N/mm (with longest stylus) ~0.6 N/mm (with shortest stylus) Damping Single viscous fluid damper SM25-5 Two viscous fluid dampers Power supply +12 V (5%), -12 V (+10%/8%), +5 V (+10% / +13%) DC at probe Outputs Non-linear and non-orthogonal (X, Y, Z) analogue outputs rate, gain and resolution are not fixed Probe SP25M requires a non-linear, third-order calibration polynomial calibration method Suitable styli M3 range Stylus length (EWL) SM25-1 20 - 50 mm (0.78 - 1.97 in) using 20mm - 50mm stylus SM25-2 50 - 105 mm (1.97 - 4.11 in) using 20mm - 75mm stylus SM25-3 120 - 200 mm (4.72 - 7.87 in) using 20mm - 100mm stylus SM25-4 220 - 400 mm (8.66 - 15.75 in) using 20mm - 200mm stylus SM25-5 10 - 100 mm (0.39 - 3.94 in) using 10mm - 100mm stylus Interface options Renishaws UCC controllers or AC3 PC interface card for machines not fitted with the UCC controller

SP25M probe body

TM25-20

SM25-1

SM25-2

SM25-3

SM25-4

SM25-5

SH25-1 TP20 module

SH25-5

EWL 20 - 50mm (0.79 - 1.97in)

SH25-2

EWL 50 - 105mm (1.97 - 4.13in)

SH25-3

EWL 10 - 100mm (0.39 - 3.94 in)

EWL 120 - 200mm (4.72 - 7.87in) Range of racks to suit all different configurations

SH25-4

EWL 220 - 400mm (8.66 - 15.75in)

Additional information
A range of SP25M probe kits is available to suit your application - from entry-level kits for touch-trigger users, to full combination kits. A range of module kits are available to supplement the probe kits, allowing SP25M users to build up their probing capability over time. Details of probe and module kits, module change racks and spare parts can be found at www.renishaw.com/SP25M.

For worldwide contact details, please visit our main website at www.renishaw.com/contact
2001 - 2011 Renishaw plc Renishaw reserves the right to change specifications without notice Printed in England 0911 US hybrid part no. H-1000-3197-06-A

Printed in England 0911 Part no. H-1000-3167-05-A

You might also like