Scribd
Upload
367 views5 pages

XPROG-M Programmer Suport

Uploaded by

Alex Navas Fonseca
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
367 views5 pages

XPROG-M Programmer Suport

Uploaded by

Alex Navas Fonseca
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

www.obd2be.

com

XPROG-M PROGRAMMER

Support COM port and USB1.1/2.0

COM port selction

Support EEPROM---24CXX 93CXX 25XXX 95XXX 35080 TC8910X X24CXX M6M800XX etc reading and writing; Support MOTOROLA-HC05 HC 11 HC 08 HC S 12-secured XDP512 MCU reading and writing; Support MOTOROLA-MPC555/556 MPC561/562 MPC563/564 MPC565/566 MPU reading and writing; Support NATIONAL-CR16-80PIN MCU reading and writing; Support ST7ST10 MPU reading and writing ; Support TMS370374 MCU reading and writing; Support BMW-E38E39E46E53E65X3 series instrument cluster M35080 reading and writing35080V6 reading ONLY and increase kilometer, cant decrease kilometer. Support BMW-E60E63E64-TV lock and unlock / activation.

www.obd2be.com

NoteVerify the exact type of the chip before reading and writing.

BMW CAS-3 CPU0L15Y9S12XDP512 Run XPROG-M.exe

Select

to choose the specific chip type:

www.obd2be.com

Pin outs definition diagram by entering :

www.obd2be.com

Click

to create a new window

Connect the chip with programmer

www.obd2be.com

The XPROG-M support most of the chips reading and writing without moving the chips, but for most of the chips we recommend you to move the chips from PCB for the better data communication if youre capable of that. When you use USB port connection, you no need to power on the programmer with extra power supply, if you need to power on the programmer, please use 12V 15V power supply with testing it ready beforehand. The programmer will verify data while reading and writing(reading verify, writing verify )when the verify error as below occur, please click NO and save the data, and read it again and make the datas validation, if the 2times data reading is the same that means reading successfully.

You might also like