Scribd
Upload
656 views2 pages

Addressable Fire Alarm Control Panel

The addressable fire alarm control panel uses a dual wire analog bus system that can replace conventional fire alarm systems using 50% fewer cables. Each detector, module, manual call point, horn, and strobe has its own independent address, allowing firefighters or guards to locate the exact source of a fire alarm instead of a wide area. The AW-AFP2100 series is an advanced, reliable system that has been used in many countries. It has a 7.4-inch LCD display, map display, adjustable detector sensitivity, single point start/stop, and can network up to 20 panels.

Uploaded by

Md Sanaul Karim Shohel
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
656 views2 pages

Addressable Fire Alarm Control Panel

The addressable fire alarm control panel uses a dual wire analog bus system that can replace conventional fire alarm systems using 50% fewer cables. Each detector, module, manual call point, horn, and strobe has its own independent address, allowing firefighters or guards to locate the exact source of a fire alarm instead of a wide area. The AW-AFP2100 series is an advanced, reliable system that has been used in many countries. It has a 7.4-inch LCD display, map display, adjustable detector sensitivity, single point start/stop, and can network up to 20 panels.

Uploaded by

Md Sanaul Karim Shohel
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Addressable Fire Alarm Control Panel

Profile:
The addressable fire alarm control panel is a dual wire analog bus system, it can replace the conventional fire alarm control system to save 50% or more cables. Each detector, module, manual call point, horn, strobe ,hydrant has its own independent address, the fireman or the guard can find the exact fire alarm location instead of a wide area in conventional system. The AW-AFP2100 series addressable fire alarm control panel is an advanced, perfect and reliable system, it has been used in many countries.

Characters:
1. 32 bit MCU, embedded computer operation system, 7.4 inch LCD display (it is bigger than most of other factories), PS/2 mouse and PC keyboard, Windows menu, user friendly interface, nice looking. 2. Map display on both the panel and the computer monitor. (Most of the other factories
Shenzhen Asenware Test & Control Technology Co.,Ltd. Address: D-26H,Shihong Bd.,Fanshen Rd.,Baoan,Shenzhen,China-518101 Tel:+86-755-27663815 Fax:+86-755-27663915 Email:[email protected] www.asenware.com

3. 4. 5. 6.

have only computer monitor map display function) Detector sensitivity is adjustable. Single point start/stop, self-test. Max panels network capacity is 20. Exact location configuration: zone-building-floor-room

Parameters:
1 Panel series: Model No. AW-AFP2100/40 AW-AFP2100/396, 792,1188 AW-AFP2100/1584, 1584+396*n 1 Main characters LED indicator, 40 points address, wall mounted panel LCD display, 396*n points address, wall mounted panel LCD display, 296*n points address, cabinet panel

396 points loop card: each loop card has 2 loops, each loop has 198 points address, but the module points (MCP, horn, I/O modules and so on) should be less than 99 to keep enough power in the loop. 2 Max points of one panel: 15840 points 3 Multi-line integrated fireman panel capacity: 4000 points 4 Bus integrated fireman panel capacity:4000 points 5 Panels network capacity : 20, by CAN bus. 6 Maximum loop length: 1500m 2 7 Loop cable: 2*1.5mm twisted pair cable 8 Maximum simultaneous alarm of each panel: 8.1 Fire alarm500 8.2 Trouble500 8.3 Feedback500 9 Operating environment: 10 Temperature: -10~+55 11 Relative humidity: 95%40,non-condensing 12 Power: 12.1 AC power: 220VAC,50Hz,3A 12.2 DC power:24VDC 12.3 Battery:12V7.0Ah*2

Certification: CE

Shenzhen Asenware Test & Control Technology Co.,Ltd. Address: D-26H,Shihong Bd.,Fanshen Rd.,Baoan,Shenzhen,China-518101 Tel:+86-755-27663815 Fax:+86-755-27663915 Email:[email protected] www.asenware.com

You might also like