Scribd
Upload
573 views

Fundamentals of RF System Design and Simulation

This document provides information about a two-day course on fundamentals of RF system design and simulation to be held on September 13-14, 2010 in Perth, Western Australia. The course will cover topics such as radio system architectures, characterization and measurement of receivers and transmitters, and simulation of components and systems. Participants are encouraged to bring their own laptops to follow along with simulations. The registration fee is AU$1320 and the deadline to register is four weeks prior to the course start date. The course is organized by NICTA, Australia's ICT research center of excellence.

Uploaded by

Hi_Lev
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
573 views

Fundamentals of RF System Design and Simulation

This document provides information about a two-day course on fundamentals of RF system design and simulation to be held on September 13-14, 2010 in Perth, Western Australia. The course will cover topics such as radio system architectures, characterization and measurement of receivers and transmitters, and simulation of components and systems. Participants are encouraged to bring their own laptops to follow along with simulations. The registration fee is AU$1320 and the deadline to register is four weeks prior to the course start date. The course is organized by NICTA, Australia's ICT research center of excellence.

Uploaded by

Hi_Lev
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Fundamentals of RF System Design and Simulation

13-14 September 2010 Presenter: Dr Rowan Gilmore Perth WA


Teaching Arrangements: The course will be conducted from 9.00am to 5.00pm. Morning tea will be available at approximately 10.00am to 10.30am, lunch from 12.30pm to 1.30pm and afternoon tea at approximately 3.00pm to 3.30pm. About this Course This 2-day short course will focus on tradeoffs in designing wireless systems, and show how to seamlessly move between both the circuit and system level in radio transceivers and other RF systems. We do this by looking at typical radio architectures, exploring the design tradeoffs, and simulating at both the circuit and system level. The course treats digitally coded signals in RF and IF components, and explores the compromises that are inherent in the design of a radio transceiver. From the RF perspective, the need to minimize interference from nearby unwanted stronger signals and to allow detection of a desired signal in noise is critical. Avoiding corruption of other signals sharing the spectrum is equally critical. Achieving both together is not so simple! In wireless LAN for instance, tradeoffs made to solve one problem, like multi-path reception, have placed tight constraints on other parts of the system, such as the linearity of the power amplifier. We will interactively simulate a double super-heterodyne, dual-band radio receiver, as well as multiple components. This provides the opportunity to explore 'what if?' scenarios. To benefit most, bring your own laptop computer and, prior to attending, obtain a free trial license of the Visual Systems Simulator (VSS) from Applied Wave Research at www.appwave.com. Brief Course Outline Introduction to Radio Systems and Digital Communications: Revision of Coding and Modulation Formats; Baseband Filtering; Typical Receiver System Architectures: Direct conversion, super-heterodyne, dual conversion super-heterodyne. Characterization and Measurement of Receivers: Noise in Receivers; Selectivity, Sensitivity and Minimum Detectable Signal; Nonlinearities and Third-Order Intermodulation Distortion; Reception in the Presence of Interferers; Dynamic Range and How to Improve It With AGC. Characterization and Measurement of Transmitters: Power and Harmonic Distortion; Spurious Products; ACPR, Spectral Regrowth and Linearity; Efficiency. Simulation of a Dual-band Superhet Radio Receiver: Spreadsheet-based Linear Systems Analysis; Calculation of Sensitivity and Dynamic Range; Systems Simulation; AGC to Increase the Dynamic Range; Effect of Changing the Gain, Intercept Point, and Filtering. System considerations for Amplifiers, Mixers, and Oscillators: Design Tradeoffs between Linearity, Power, and Efficiency; Classes of Amplifier Operation; Simulation of Spectral Regrowth with Different Modulation Formats; Phase Noise in Oscillators; Calculating Allowable Phase Noise from System Specifications; I -Q Modulators and the importance of quadrature. About the Presenter Dr. Gilmore is a Chartered Engineer and Senior Member of the IEEE. He has published more than thirty articles in the field of microwave systems and circuit design, and has served on the editorial boards of the IEEE Transactions on Microwave Theory and Techniques, and of Wiley's International Journal of RF and Microwave Computer-Aided Engineering. He has been active in the education of graduate engineers in industry, having taught courses around the world to nearly fifteen hundred practicing RF and microwave engineers for the over a decade. With Dr. Les Besser, he is co-author of the widely read two-volume textbook Practical RF Circuit Design for Modern Wireless Systems. For the past four years, as the Chief Executive Officer of the Australian Institute for Commercialisation, located in Brisbane, Australia, he has worked on establishing liaisons and facilitating technology transfer between universities and industry. He also holds appointments as Adjunct Professor of Electrical Engineering, and in the School of Business, at the University of Queensland.

Registration Fee: AU$1320 (including GST) Group and PhD student discounts available. Please enquire.

How to Register To register fill out the registration form (overleaf) and fax it to +61-8-8343-8711 or scan and email it to
[email protected]

Cancellation Policy At least 4 weeks notice is required for cancellation of a place in a short course for full reimbursement. If cancellation is later than 4 weeks then the place can either be given to another person or the registrant can be provided with a credit towards other NICTA training.

For details of further courses please see our web site: www.nicta.com.au/short_courses or contact the NICTA Industry Education Manager.

About NICTA and Short Course Program


National ICT Australia (NICTA) is Australias ICT Centre of Excellence and was established to drive innovation through high quality research, research training and technology transfer. As a world-class research institute NICTA uniquely combines excellence in research, education, commercialisation and collaboration. We are working to ensure that Australia is well placed to benefit from the significant opportunities that ICT research delivers. NICTA is funded by the Australian Government as represented by the Department of Communications, Information Technology and the Arts and the Australian Research Council through Backing Australias Ability and the ICT Centre of Excellence program. NICTA members are the Australian Capital Territory Government, the New South Wales Government, the University of New South Wales and the Australian National University. NICTA short courses offer scientists, engineers and managers technical training with a leading edge in areas such as telecommunications, transport, security, defence, logistics, e-government, mining, finance and biotechnology.

There will be ample opportunities for discussion and questions and answers. Morning and afternoon tea/coffee and a light lunch will be provided. Extensive workshop materials will be made available to participants.

How to register Please complete the registration form below and Fax it to +6188343-8711 or Scan and email it to [email protected]. Send the form as soon as possible to secure your place. For further information please contact Anne-Marie Eliseo Industry Education Manager Telephone: +6188343-8710 Email: [email protected]

Registration Form and Tax Invoice*

ABN 62 102 206 173

*Upon completion of this form, including the relevant payment, this form will become a Tax Invoice.

Please register me for Fundamentals of RF System Design and Simulation on 13-14 September 2010.
PLEASE PRINT Title: Position: Postal Address: Telephone No: Dietary preference: Course Fees: Full fees: AU$1320 (incl. GST) Facsimile No: Email: First Name: Organisation/Division: Surname: Date:

Method of Payment (please tick below): Cheque (payable to National ICT Australia Ltd) Please forward the cheque and a copy of THIS registration form to: Anne-Marie Eliseo, Industry Education Manager, NICTA, Innovation House, First Avenue, Mawson Lakes SA 5095, Australia.

Credit Card:

Credit Card No.: Visa Amount: AU$ Email address of card holder: Master Card Name on card: Signature:

Expiry Date:

Tick if receipt required

Electronic Funds Transfer Please advise by email to Annette Van Bramer [email protected] when payment is made

BANK ACCOUNT NAME BSB ACCOUNT NUMBER REFERENCE NUMBER

Commonwealth Bank of Australia National ICT Australia Limited 062 900 1032 4576 130910P

FAX the form to + 61 8 8343 8711

or

EMAIL it to [email protected]

Privacy Clause: The above information is being collected by NICTA and will be added to our contact database and will be used primarily to provide you with further information about NICTA events and services. All information is collected, used or disclosed subject to NICTAs Privacy Policy which can be accessed at http://nicta.com.au/about/nicta_website/privacy. Please tick the box below if you do NOT wish to receive any further mailings from NICTA. I do not wish to receive any further mailings from NICTA You can use the following options to access or remove your personal information from NICTAs databases, make a complaint about a breach of privacy or if you have a query relating to NICTAs privacy practices and policies: Send an email to [email protected] or Phone NICTAs Industry Education Manager on +61 8 8343 8710.

You might also like