Design Concrete Structures using Eurocode 2
How to design element to eurocode 2. Design of slabs,beams,columns,etc. Site will guide you, the way to follow when designing to eurocode 2.
EUROCODE 2
How to design element to eurocode 2. design of slabs,beams,columns,etc. Site will guide you, the way to follow when designing to eurocode 2.
Monday, November 15, 2010
Earn Money
Design of Simply Supported Slab
Slab design Example 02 Design of simply supported slab (Two way spanning)
Advertisement
Earn Money
Span of slab 4.5m & 6.3m Variable load 5 kN/mm2 Slab thickness 200 mm Fck 25 N/mm2 fyk 500 N/mm2 Cover to the reinforcements 25mm Office building No Moment re-distribution
All Design Examples
Beam design procedure BS 8110 vs EC2 Cantilevre slab design Column with Biaxial Bending Design of Combined Footings Design of Pad Footings Design procedure non slender Design Procedure Slender column Doubly reinforced section EC 2 Comparisons with BS 8110 Example Non Slender Column Introduction Shear Design Example Shear Design Procedure Simply Supported Slab Design Singly Reinforced beam Slab design to eurocode Staircase design What's New
Ly/Lx
=6.3/4.5 =1.4
Therefore slab is two way
Slab loading
Self weight = 200x25x10-3 = 5kN/mm2 Ul mate load = 1.35gk+1.5qk = 1.35x5+1.5x5 n = 14.25 kN/mm2
Bending moment coecients for mid span sx sy = 0.099 = 0.051
Bending moment in short span Msx = sx*n*(lx)^2 = 0.099*14.25*4.5^2 = 28.57 kN/mm2 Earn Money
Earn Money
Bending moments at long span Msy = sy*n*(lx)^2 = 0.051*14.25*4.5^2 = 14.72 kN/mm2 Assume T12 bars used for short span and T10 bars for long span Eec ve depth at short span
Advertisement
Fish
= 200-25-6 = 169mm Eec ve depth at long span = 200-25-12-5 = 158mm Reinforcement for short span K = Msx/bd2fck = 28.57x10^6/1000x169^2x25 = 0.04 K = 0.60-0.182-0.21 Earn Money
converted by Web2PDFConvert.com
M Share | S S S S
No redistribu on ,Therefore
k k>k
=1 = 0.21
Earn Money
Compression reinforcement is not required Z = (d/2)*(1+(1-3.53k)^0.5) 0.95d = (169/2)*(1+(1-3.53*0.04)^0.5) 0.95*169 = 162.81 160.55 Therefore Z As Earn Money = 160.55 = Msx/0.87fyk*Z = 28.57*10^6/(0.87*500*160.55) = 409 mm2/m Provide T10 @ 150mm C/C (As pro. = 523mm2/m) Visits
Posts Comments
Subscribe To
13696
Check for deec on
Allowable span/d e. = (l/d)*F1*F2*F3 = As req. /bd
For simply supported slab K o =1 = (fck ^.5)/1000 = (25 ^.5)/1000 = 0.005 = 445/ (1000*169) = 0.00263 0 > Then l/d = K{11+[1.5*(fck^0.5) o/ ]+ 3.2*(fck^0.5)*[( 0/ )-1]^1.5} = K{11+[1.5*(25^0.5)0.005/0.00263]+ 3.2*(25^0.5)* *[(0.005/0.00263)- 1]^1.5} = 38.95 Normal slab F1 Span is less than 7m F2 F3 =1 = 310/s 1.5 = (fyk/s )(As,req/As,prov)(SLS Loads / ULS loads)(1/) = (fyd)(As,req/As,prov)(gk+ 2qk) /( G gk + Q qk)(1/)
= (500/1.15)(409/523)(5+0.3*5) /(1.35*5 + 1.5*5)(1/1)
=1
= 155.09 N/mm2 F3 = 310/155.09
= 2.0 1.5
Hence,
F3
= 1.5
Allowable span/d e. = 38.95*1*1*1.5
converted by Web2PDFConvert.com
= 58.43 Actual span/ d e. = 4500/169 = 26.63 Deec on check is ok
Reinforcement for long span
K = Msy/bd2fck = 14.72x10^6/1000x158^2x25 = 0.024 K = 0.60-0.182-0.21
No redistribu on, Therefore k k>k =1 = 0.21
Compression reinforcement is not required Z = (d/2)*(1+(1-3.53k)^0.5) 0.95d = (158/2)*(1+(1-3.53*0.024)^0.5) 0.95*158 = 154.58 150.1 Therefore Z As = 150.1 = Msx/0.87fyk*Z = 14.72*10^6/ (0.87*460*150.1) = 245 mm2/m Provide T10 @ 200mm C/C (As provided 293mm2/m)
Posted by Prasad at 4:45 AM
Labels: Simply Supported Slab Design
0 comments: Post a Comment Enter your comment...
Comment as:
Publish
Select profile...
Preview
converted by Web2PDFConvert.com
Newer Post
Home
Older Post
Copyright (c) 2010 Design Concrete Structures using Eurocode 2. Designed for Link Building Company Video Games, High Deductible Health Insurance, Used Cars
converted by Web2PDFConvert.com
