Automotive Equipment Training Programme 2012

Contents
At Bosch Training Centre Courses on Diesel Fuel Injection Equipment Course on Auto Electrical Seminar for OE Customers Courses for Institutional Customers Courses on Workshop & Test Equipment Course on Bosch Wheel Aligner Course on Bosch Wheel Balancer, Tyre Changer and Nitrogen Tyre Inflator Course on Bosch Air Conditioning Machine Course on Vehicle Maintenance & Systems Specialised Courses on Systems Course for Bosch System Technicians Courses for Sales/Service Personnel Courses for Educational Institutes Course for Trainers Course for Students Course for New Entrants (AA) Course for Employees from Bosch Group (India) At Regional/ Local Training Centres Courses on Diesel Fuel Injection Course on Gasoline Fuel Injection Course on Auto Electrical Courses on Bosch Battery Seminars Techno-commercial Courses for State Transport Undertakings Courses for Sales Personnel Course on 2-Wheeler Products Courses on Workshop & Test Equipment Course for Defence Personnel Course for OE Customers Courses for Students and Lecturers Courses for Bosch Car Service (BCS) Training Centres Accommodation/ Transport Details Bangalore North Region South Region East Region West Region 28 29 33 37 40 43 04 04 06 06 06 08 08 09 09 09 10 10 10 11 11 11 11 11 12 12 14 14 14 15 17 18 18 19 19 19 20 21 27

Eligibility and Enrolment Procedure

S. Muralidharan

T.S. Ananda Kumar

Dear Business Partner, Just a few years ago, in order to accelerate and sustain the growth in the automobile sector in India, the Ministry of Heavy Industries in consultation with the industry, planners, academia, state and central authorities, prepared a comprehensive document titled "Automotive Mission Plan 2006-2016". Herein, it lay down a blueprint for the development of the automotive industry, with a vision to make India a global automotive hub. In its assessment of the situation, it also clearly identified the challenges as well as the opportunities that faced India. One of the key topics that was put forth as an area of focus was "availability of trained manpower". This would not only aid in the growth of the sector, but also facilitate in achieving the employment goals. Today, the Indian automotive industry is in a very enviable position it has emerged as the world's fastest growing passenger car market, the largest manufacturer of tractors and 3-wheelers, the second largest 2-wheelers manufacturer and the 4th largest producer of commercial vehicles. The OE landscape is dotted with Indian and global manufacturers, spread across the length and breadth of the country. Joint ventures, mergers and acquisitions are the trend, with players wanting to gain access to new markets and new technologies. The Indian auto component sector too is witnessing robust growth rates the prime driver being cost advantage of Indian manufacturing. Increased component localisation for Indian OEMs and component outsourcing for global vehicle manufacturers bode well for India. The vehicle parts is geographically dispersed and complex with the co-existence of three generations of systems! Labour cost being relatively low in India, it continues to be a repair market. All these factors create a conducive environment for companies like Bosch to leverage on its unique strengths: Parts+Bytes+Services strategy. At Bosch, we believe in "investing" in training; globally, we train about 70,000 people each year. In the AA world, India is maintaining a leading position in terms of the number of participants trained each year. In order to develop competent manpower, it is imperative to make training accessible, relevant and effective. We have achieved this objective through various measures: f f f f f Continuous upgrade & introduction of newer course modules to meet business requirement Collaborations with channel partners and government bodies to expand training infrastructure Joint certification at educational institutes and universities through curriculum development Making training an integral part of our service concept to upgrade the skill levels of technicians Customised programmes to address specific needs Bosch System Technician (BST), Service Promoter, Select Train Employ & Perform (STEP), Sales Force Academy programme for Field Representatives.

We have thus gone beyond the obvious and used Training as an important tool to enable the entire value chain, thereby securing our market leadership and our future success. I am confident that you will find useful courses/ modules in our Training Calendar 2012. We look forward to welcoming you to our 'gurukul' soon. Let's together build competence for today and tomorrow. Yours sincerely,

S. Muralidharan Vice President Automotive Aftermarket

T.S. Ananda Kumar General Manager Technical Service & Support Automotive Aftermarket

03

Courses Bosch Training Centre

Courses on Diesel Fuel Injection Equipment
Course Code: Duration: Objective: Participants: Course Content: EP - X Ten days. To make participants competent in carrying out quality service on Diesel Fuel Injection Equipment with more hands-on training. Fuel Injection Equipment Service Personnel, preferably Bosch Authorised Representatives. Working Principle, Repair and Testing of PE...A-type Multi-cylinder Fuel Injection Pump with RSV and RQV Governors, VE Distributor-type Fuel Injection Pump, Add-on Modules fitted on PE and VE Pumps, Injector, Injection Timer, Feed Pump and Filters, Injection Timing Setting on Diesel Engine, Safety and Housekeeping, Maintenance and Upkeep of Service Literature. BTC (Naganathapura, Bangalore) (On request). EP - 4 Three days. To make participants competent in carrying out quality service on Diesel Fuel Injection Equipment. Fuel Injection Equipment Service Personnel, preferably Bosch Authorised Representatives, Engineers/ Technicians from OEMs. Working Principle, Repair and Testing of VE Distributor-type Fuel Injection Pump with and without Manifold Pressure Compensator (LDA), Add-on Modules, Injectors, Filter and Injection Timing Setting on Diesel Engine fitted with VE Pump, Safety and Housekeeping, Maintenance and Upkeep of Service Literature. BTC (Naganathapura, Bangalore). EP - P Three days. To make participants competent with Heavy-Duty Test Bench to carry out quality service on Diesel Fuel Injection Equipment. Fuel Injection Equipment Service Personnel of Bosch Authorised Representatives equipped with Heavy-Duty Test Bench. Working Principle, Repair and Testing of Bosch PE...P Fuel Injection Pump and RQV-K Governor, Bosch EDC Governor fitted on PE...P Fuel Injection Pumps, Safety and Housekeeping, Maintenance and Upkeep of Service Literature. BTC (Naganathapura, Bangalore).

Place: Course Code: Duration: Objective: Participants: Course Content:

Place: Course Code: Duration: Objective: Participants: Course Content:

Place:

04

Course Code: Duration: Objective: Participants: Course Content:

EDC - 1 Two days. To make participants competent in carrying out quality service on Bosch VE Fuel Injection Pumps with Electronic Diesel control (VP-37). Personnel servicing Fuel Injection Equipment. Working Principle, Repair, Testing and Adjustment of Bosch VE Fuel Injection Pumps (VP 37), Safety and Housekeeping, Maintenance and Upkeep of Service Literature. BTC (Naganathapura, Bangalore). EDC - 2 Two days. To make participants competent in carrying out quality service on Bosch VP-44 Fuel Injection Pumps. Personnel servicing Fuel Injection Equipment, preferably from Bosch Authorised Representatives. Working Principle, Repair, Testing and Adjustment of Bosch VP-44 Fuel Injection Pumps on EPS 815 Test Bench, Safety and Housekeeping, Maintenance and Upkeep of Service Literature. BTC (Naganathapura, Bangalore). CR - 1 Three days. To make participants competent in carrying out quality service on Common Rail High-pressure Pumps and Injectors. Technicians from BDS and OEMs equipped with EPS 815 and having experience in handling all types of existing fuel injection systems. Structure, Function of Common Rail High-pressure Pumps and Injectors (CP1K, CP1H & CRI), Characteristics, Testing on the Pump Test Bench EPS 815 with KMA Measuring technique and Testing of Common Rail Injectors. BTC (Naganathapura, Bangalore). CR - 2 Three days. To make participants competent in carrying out quality service on Common Rail High-pressure Pumps and Injectors. Technicians from BDS and OEMs equipped with EPS 815 and having experience in handling all types of existing fuel injection systems. Structure, Function of Common Rail High-pressure Pumps and Injectors (CP3, CPN2.2, CB18 & CRIN), Characteristics, Testing on the Pump Test Bench EPS 815 with KMA Measuring technique and Testing of Common Rail Injectors. BTC (Naganathapura, Bangalore). EPS Two days. The participants will be able to operate the EPS 815 Test Bench using the Software EPS 945/ 944. New staff, existing and potential EPS 815 users. Personnel who have good experience on handling all types of fuel injection pump and governors.

Place: Course Code: Duration: Objective: Participants: Course Content:

Place: Course Code: Duration: Objective: Participants: Course Content:

Place: Course Code: Duration: Objective: Participants: Course Content:

Place: Course Code: Duration: Objective: Participants:

05

Course Content:

Operation of Test Bench EPS 815 with KMA measuring technique. f Programming of test protocol adjustment steps. f Importing/exporting data. f Inline and Distributor Pump test equipment fitment. f Basic pump adjustment. f Vehicle Diagnosis (Diesel vehicle)

Place:

BTC (Naganathapura, Bangalore).

Course on Auto Electrical

Course Code: Duration: Objective: Participants: Course Content: Place: AEL - 2 Three days. To make participants competent in carrying out quality service on Bosch Auto Electrical Products and Test Equipment. Personnel handling Auto Electrical Equipment at Bosch Authorised Stockists/ Distributors/ Workshops. Working Principle, Repair and Testing of Bosch Auto Electrical Products and Respective Test Equipment. BTC (Naganathapura, Bangalore) (On request).

Seminar for OE Customers

Course Code: Duration: Objective: Participants: Course Content: Place: OES Three days. To provide knowledge on Bosch Products and to inform participants about the latest developments in Bosch Products. Managers/ Engineers of OEMs manufacturing Diesel Engines and Vehicles. Design, Working Principle, Test Procedures of Bosch Fuel Injection and Auto Electrical Equipment, Interaction with Bosch R&D, Quality and Service Departments. BTC (Naganathapura, Bangalore).

Courses for Institutional Customers

Course Code: Duration: Objective: RLY Two days. To make participants competent in carrying out quality service on Fuel Injection Equipment. Fuel Injection Equipment Service Personnel of Railways. Working Principle, Repair and Testing of PF-type Fuel Injection Pumps and Injectors used by Indian Railways, Safety and Housekeeping, Maintenance and Upkeep of Service Literature. BTC (Naganathapura, Bangalore)

Participants: Course Content:

Place:

06

Course Code: Duration: Objective: Participants: Course Content:

DEF - 2 Three days. To make participants competent in carrying out quality service on Diesel Fuel Injection Equipment. Fuel Injection Equipment Service Personnel from Defence having minimum two years of on-the-job experience. Working Principle, Repair and Testing of PE...A Multi-cylinder Fuel Injection Pump with RSV and RQV Governors, Manifold Pressure Compensator fitted on PE Pumps, Injection Timing Lock on PE Pumps, Injectors, Injection Timers, Filters and Feed Pump, Injection Timing Setting on Diesel Engine, Working Principle, Repair and Testing of Distributor Type, Fuel Injection Pump Type VE with and without Manifold Pressure Compensator (LDA), Add-on Modules, Injection Timing Setting on Diesel Engine fitted with VE Pump, Safety and Housekeeping, Maintenance and Upkeep of Service Literature. BTC (Naganathapura, Bangalore).

Place:

07

Courses on Workshop & Test Equipment

Course Code: Duration: Objective: Participants: Course Content: WTE - 2 Three days. To help participants in carrying out Maintenance, Troubleshooting and Minor Repairs of Bosch Authorised Workshop and Test Equipment. Personnel looking after the maintenance of Bosch Authorised Workshop and Test Equipment, TMSS. Operating Instructions, Maintenance, Troubleshooting Guidelines, Service and Minor Repairs of Auto Electrical and FIE Test Benches, BAT 121, Battery Load Testers, Battery Chargers, Tyre Changers, Wheel Balancers, ACS and all other diagnostic products of Bosch. BTC (Naganathapura, Bangalore) (On request). MRS Four days. To help participants in carrying out AMC Activities, Troubleshooting and Minor Repairs of Bosch Authorised Workshop and Test Equipment. Missionary Representatives looking after maintenance of Bosch Authorised Workshop and Test Equipment. AMC Activity, Operating Instructions, Maintenance, Troubleshooting Guidelines, Service and Minor Repairs of Auto Electrical and FIE Test Benches, ASC Equipment, BAT 121, Battery Chargers, Battery Load Testers, Tyre Changers, Wheel Aligners and other workshop equipment. BTC (Naganathapura, Bangalore).

Place: Course Code: Duration: Objective: Participants: Course Content:

Place:

Course on Bosch Wheel Aligner

Course Code: Duration: Objective: Particpants: WA One day. To make participants competent enough in carrying out quality service using Bosch wheel aligner. PSDG, BTS, Wheel Aligner end customer 1. Fundamentals of Steering Geometry 2. Five basic alignment angles 3. Wheel alignment specifications.Steering axis inclination 4. Maintenance tips: Steering system, suspension etc. 5. Product feature & operating principle of Bosch Wheel Aligner 6. Training on wheel alignment software 7. Practical on Wheel Alignment using Bosch Wheel Aligner 8. Wheel Aligner Maintenance tips, Dos & Donts Place: BTC (Naganathapura, Bangalore) and RTCs (On request)

08

Course on Bosch Wheel Balancer, Tyre Changer and Nitrogen Tyre Inflator
Course Code: Duration: Objective: Particpants: Course Content: WB, TC, NTI One day. To make participants competent enough in carrying out quality Service using Bosch Wheel Balancer, Tyre Changer & Nitrogen Tyre Inflator. PSDG, BTS, End customer 1. Basics of tyre ( Construction, terminology ) 2. Different types of tyres 3. Operating principle of Wheel Balancer, Tyre Changer, NTI & Knowledge on nitrogen 4. Effects of unbalanced wheel on steering system 5. User training on balancing the different types of wheels 6. User training on Tyre Changer, precautions to be followed while changing the tyres 7. User training on NTI 100 8. Maintenance tips, Dos & Donts: Wheel Balancer, Tyre Changer & NTI 100 Place: BTC (Naganathapura, Bangalore) and RTCs (On request).

Course on Bosch Air Conditioning Machine

Course Code: Duration: Objective: Particpants: Course Content: ACS One day. To make participants competent enough in carrying out quality service using Bosch ACS 600, ACS650 machine. PSDG, BTS, End customer. 1. Basic working principle of car A/C system 2. Different A/C gases and its features 2. Knowledge on car A/C components system 3. Operating principal of Bosch ACS 6xx 4. User training on ACS 6xx 5. Maintenance tips, Dos & Donts: ACS 6xx 6. Maintenance tips on vehicle A/C system. Place: BTC (Naganathapura, Bangalore) and RTCs (On request).

Course on Vehicle Maintenance & Systems

Course Code: Duration: Objective: Participants: VMS Five days. To make the participants competent in carrying out quality service on Bosch Products fitted in vehicles. Personnel at BCS Bosch Authorised Stockists/ Distributors/ Workshops offering Vehicle Service.
09

Course Content: Place:

Practicals on Removal and Fitment of Bosch Products on the Vehicles, using Test Equipment for Diagnosis and General Service and Maintenance Aspects. BTC (Naganathapura, Bangalore) (On request).

Specialised Courses on Systems

Course Code: Duration: Objective: Participants: Course Content: GFI - 2 Two days. To educate participants about newer technologies and products in Petrol Injection. Bosch Territory Managers Sales and Service, Bosch Authorised Distributors Field Representatives, Bosch Authorised Product Stockists and BCS (by invitation). Technology and Product Knowledge on Petrol Injection. Working of Petrol Engine, Carburetion Process, Single Point Fuel Injection, Multi Point Fuel Injection and Vehicle Diagnosis Hardware and Software. BTC (Naganathapura, Bangalore) (On request).

Place:

Course for Bosch System Technicians

Course Code: Duration: Objective: Participants: Course Content: BST Two to five days (depending on the module). To make the participants knowledgeable about Bosch Products, Equipment and Vehicle Systems as per the detailed course plan for System Technicians. System Technician Trainees working with Bosch Authorised Workshops (by invitation). Working Principle, Repair and Testing of Bosch Products and Respective Test Equipment, Knowledge on Vehicles, New Technologies and Diagnostic Tools/ Equipment. BTC (Naganathapura, Bangalore), RTCs and LTCs.

Place:

Courses for Sales/Service Personnel

Course Code: Duration: Objective: Participants: Course Content: Place: Course Code: Duration: Objective: Participants: Course Content: Place: TMSS Five days. To make participants competent in handling sales and service activities pertaining to Bosch Products. Bosch Territory Managers Sales and Service (by invitation). Product-specific contents (will be mentioned in the invitation). BTC (Naganathapura, Bangalore). TMSE Five days. To make participants competent in handling service activities pertaining to new Bosch Products and Equipment. Bosch Territory Managers Service (by invitation). Product-specific contents (will be mentioned in the invitation). BTC (Naganathapura, Bangalore) (on request, basic courses of two/ three days duration will be conducted for TMSS/ TMSE at RTCs on mutually agreeable dates).

10

Courses for Educational Institutes

Course for Trainers
Course Code: Duration: Objective: Participants: Course Content: Place: TTT Five days. The Train the Trainer programme enables participants to stay abreast with the latest technologies. Trainers at educational institutes, OE customers and other institutional customers, Regional/ Local Trainers (by special invitation). New technologies in Diesel, Gasoline, Vehicle Diagnosis Hardware and Software, Latest Product Launch, and Service and Training Concepts. BTC (Naganathapura, Bangalore).

Course for Students

Course Code: Duration: Objective: Participants: Course Content: Place: NEI - 2 Three days. To educate participants about newer automotive technologies. Final year students from technical educational institutes. Newer Technologies in Diesel and Petrol Injection and Vehicle Diagnosis Hardware and Software. BTC (Naganathapura, Bangalore), RTCs and LTCs

Course for New Entrants (AA)

Course Code: Duration: Objective: Participants: Course Content: Place: AAN Five days. Product Knowledge on all AA products. All newly joined AA employees. Overview and understanding of Diesel Fuel Injection Systems, Gasoline Systems, Diagnostic Equipment and Automotive Accessories of Bosch. BTC (Naganathapura, Bangalore) (On request).

Course for Employees from Bosch Group (India)

Course Code: Duration: Objective: Participants: Course Content: Place: RB-IND Three days. To make participants understand about Systems in Automobiles. Personnel employed with Bosch Group companies. Overview and understanding of various vehicle systems with focus on Bosch Automotive products. BTC (Naganathapura, Bangalore) (On request)

11

Courses Regional/Local Training Centres (RTC/LTC)

Courses on Diesel Fuel Injection
Course Code: Duration: Objective: Participants: Course Content: PE Three days. To make the participants competent in carrying out quality service on Diesel Fuel Injection Equipment (PE Pumps). Fuel Injection Equipment Service Personnel from Bosch Authorised Workshops and independent workshops handling Bosch Fuel Injection Equipment. Working Principle, Repair and Testing of PE Multi-cylinder Pumps fitted with RSV and RQV Governors, Injection Timer, Feed Pump and Filters, MPC unit and all other Add-on Modules, Removal and Fitment of FIE on the Vehicle and Setting of Fuel Injection Timing. RTCs/ LTCs. VE - 1 Two days. To make participants competent in carrying out quality service on Diesel Fuel Injection Equipment (VE Pumps). Fuel Injection Equipment Service Personnel from Bosch Authorised Workshops and independent workshops handling Bosch FIE. Working Principle, Repair and Testing of VE Pumps fitted with Mechanical Governors. Filters, Removal and Fitment of FIE on the Vehicle and Setting of Fuel Injection Timing. RTCs/ LTCs. VE - 2 Two days. To make participants competent in carrying out quality service on Diesel Fuel Injection Equipment (VE Pumps with Add-on Modules). Fuel Injection Equipment Service Personnel from Bosch Authorised Workshops and independent workshops handling Bosch Fuel Injection Equipment. Working Principle, Repair and Testing of VE Pumps with MPC and all other Add-on Modules. Filters, Removal and Fitment of FIE on the Vehicle and Setting of Fuel Injection Timing. RTCs/ LTCs.

Place: Course Code: Duration: Objective: Participants: Course Content:

Place: Course Code: Duration: Objective: Participants: Course Content:

Place:

12

Course Code: Duration: Objective: Participants: Course Content: Place: Course Code: Duration: Objective: Participants: Course Content: Place: Course Code: Duration: Objective:

PF One day. To make participants competent in carrying out quality service on Diesel Fuel Injection Equipment. Fuel Injection Equipment Service Personnel, preferably Bosch Authorised Representatives, Engineers/ Technicians from OEMs. Working Principle, Repair and Testing of PF and PFR Fuel Injection Pumps, Injectors, Importance of BDC dimension and adjustment. RTCs. EDC Two days. To make participants competent in carrying out quality service on Bosch VE Fuel Injection Pumps with Electronic Diesel Control (VP-37). Fuel Injection Equipment Service Personnel from Bosch Authorised Representatives, Engineers/ Technicians from OEMs, equipped with EPS 611/620 + EDC Tools. Basics of EDC System, Working Principle, Repair, Testing and Adjustment of Bosch Distributor-type Fuel Injection Pump (VP-37) and Injectors. RTCs. VS One day. To make participants understand the importance of Injection Timing and competent in setting Injection Timing on Diesel Vehicles fitted with PE and VE-type Fuel Injection Pumps. Fuel Injection Equipment Service Personnel from Bosch Authorised Representatives, Engineers/ Technicians from OEMs and Diesel Mechanics. Basic knowledge on FIE products, Setting Injection Timing on Diesel Vehicles fitted with PE and VE-type Fuel Injection Pumps, General Maintenance Tips and Warranty Terms. RTCs/ LTCs. PE - 1 Two days (on request). To make participants equipped with Heavy-Duty Test Bench competent to carry out quality service on Fuel Injection Equipment. Fuel Injection Equipment Service Personnel from Bosch Authorised Representatives, equipped with Heavy-Duty Test Bench EPS 611/ 620. Working Principle, Repair and Testing of Bosch PE...P-type Fuel Injection Pumps with RQV-K Governor and Injectors. RTCs (On request).

Participants: Course Content:

Place: Course Code: Duration: Objective: Participants: Course Content: Place:

13

Course on Gasoline Fuel Injection

Course Code: Duration: Objective: Participants: Course Content: Place: GFI - 1 One day. To educate participants about newer technologies in Gasoline Systems. Bosch Territory Managers Sales and Service, Bosch Authorised Distributors Field Representatives, Bosch Authorised Product Stockists, BCS, etc. (by invitation). Working of Gasoline Engines and Working Principle of Multi-Point Fuel Injection System and Vehicle Diagnostics. RTCs.

Course on Auto Electrical

Course Code: Duration: Objective: Participants: Course Content: AEL - 1 Two days. To make participants competent in carrying out quality service on Bosch Auto Electrical Products. Auto Electricians working in Bosch Authorised Workshops. Working Principle, Repair and Testing of Bosch Auto Electrical Products and Respective Test Equipment. Removal and fitment of Alternators/ Starter Motors on Vehicle. RTCs/ LTCs.

Place:

Courses on Bosch Battery

Course Code: Duration: Objective: Participants: Course Content: BB One day. To make participants competent in selling Bosch Batteries effectively and handling warranty. Bosch Authorised Distributors, Stockists, Dealers and Workshop Personnel handling battery sales. Construction and Working Principle, Features, Advantages and Benefits, Product Range, Charging, Testing, Using BAT 121, Competitors Information, Opportunity Areas, Sales Arguments, Effective Campaigning and Warranty Handling. RTCs/ LTCs. VEH One day. To provide basic knowledge on Vehicle Systems. Students from Polytechnics, Newly appointed Technicians employed with Bosch Authorised Representatives. Diesel Engine Basics, Fuel Injection System Basics and other Vehicular Systems. RTCs/ LTCs.

Place: Course Code: Duration: Objective: Participants:

Course Content: Place:

14

Seminars Techno-commercial
Course Code: Duration: Objective: Participants: Course Content: BWF One day. To make Bosch Authorised Workshop Foremen competent in carrying out quality service on Bosch FIE and AE Products, thus ensuring customer satisfaction. Foremen working in Bosch Authorised Workshops. Advanced knowledge on all Bosch Products, FIE, AE and Automotive Accessories, Warranty Administration, Attending Customers, Safety and Housekeeping, Troubleshooting of Vehicles, Effective Field Campaigning and Tips on Developing the Service Business. RTCs. OECD One day. To provide knowledge on Bosch Products and Marketing Policies. Works Managers and Technicians working with OECDs. Basic knowledge on Bosch Products, FIE, AE and Automotive Accessories, their Quality, Features, Schemes and Warranty Terms. RTCs/ LTCs. FO One day. To provide knowledge on Bosch Products. Proprietors, Partners and Technicians from Fleet Operators. Basic knowledge on Bosch Products, Maintenance Aspects, their Quality, Features and Warranty Terms. RTCs/ LTCs. IE One day. To provide knowledge on Bosch Products. Electricians having their own garages. Basic knowledge on Bosch Auto Electrical Products, Maintenance Aspects, their Quality, Features and Warranty Terms. RTCs/ LTCs.

Place: Course Code: Duration: Objective: Participants: Course Content: Place: Course Code: Duration: Objective: Participants: Course Content: Place: Course Code: Duration: Objective: Participants: Course Content: Place:

15

Course Code: Duration: Objective: Participants: Course Content:

CSM One/ Two days. To make Bosch Authorised Workshop Counter Salesmen competent in attending customers profitably and ensuring customer satisfaction. Counter Salesmen working in Bosch Authorised Workshops. Basic knowledge on Bosch Products, FIE, AE and Automotive Accessories, Warranty Administration, Attending Customers, Effective Field Campaigning and Tips on Developing the Service Business. RTCs/ LTCs. PMW One day. To provide knowledge on latest products, Test and Diagnostic Equipment. Proprietors of Bosch Authorised Workshops. Information on Latest Products, their Features, Advantages and Benefits, Test and Diagnostic Equipment required for the Workshop. RTCs (On request). CRO One day (on request). To provide basic knowledge on all Bosch Products, Test and Diagnostic Equipment, Handling, Storage and Shelf Life. Customer Relations Officers at various Sales Offices, Personnel employed with C&F Agents. Information on all Bosch Products, their Applications and Usage, Test and Diagnostic Equipment used by customers. RTCs (On request).

Place: Course Code: Duration: Objective: Participants: Course Content: Place: Course Code: Duration: Objective: Participants: Course Content: Place:

16

Courses for State Transport Undertakings

Course Code: Duration: Objective: Participants: Course Content: Place: Course Code: Duration: Objective: Participants: Course Content: Place: Course Code: Duration: Objective: Participants: Course Content: Place: STU - 1 Two days. To provide knowledge on Bosch Products. Technicians working with State Transport Undertakings and other Government Departments. Basic knowledge of Bosch Products, Maintenance Aspects, their Quality, Features and Warranty Terms. RTCs/ LTCs. STU - 2 Two days. To make participants competent in carrying out quality service on Diesel Fuel Injection Equipment, Auto Electrical and other Bosch Products. Nominated Personnel from State Transport Undertakings. Working Principle, Repair and Testing of PE Multi-cylinder Pumps, Alternators, Starter Motors and other Bosch Automotive Accessories. RTCs/ LTCs. WTY One day. To make participants competent in handling Warranty Issues. Bosch Authorised Workshops, Bosch Authorised Distributors Field Representatives, Bosch Authorised Product Stockists, BCS, etc. Manufacturing codes, Warranty Terms and Procedures. RTCs/ LTCs.

17

Courses for Sales Personnel

Course Code: Duration: Objective: Participants: Course Content: Place: Course Code: Duration: Objective: Participants: Course Content: PFR - 4W One/ Two days. To make participants competent in handling Bosch Products and related market issues. Field Representatives working with Bosch Authorised Network. Basic knowledge on Bosch Products, FIE, AE and Automotive Accessories, their Quality, Features, Customer Service Issues and Warranty Administration. RTCs/ LTCs. BS One day. To make participants competent in handling Bosch Products and related market issues. Bosch Authorised Stockists, Proprietors/ Partners. Basic knowledge on Bosch Products, FIE, AE and Automotive Accessories, their Quality, Features and Schemes, Selling Skills, Spare Parts Inventory Planning, Customer Service Issues and Warranty Administration. RTCs/ LTCs (On request).

Place:

Course on 2-wheeler Products

Course Code: Duration: Objective: Participants: Course Content: Place: PFR - 2W One day. To make the participants competent in handling the Bosch 2-wheeler Product Range and related issues in the market. Bosch Authorised 2-wheeler Distributors, Proprietors/ Partners. Basic Knowledge on the Bosch 2-wheeler Product Range, Quality, Features, Customer Service Issues and Warranty Administration. RTCs/ LTCs.

18

Courses on Workshop & Test Equipment

Course Code: Duration: Objective: Participants: Course Content: Place: Course Code: Duration: Objective: Participants: Course Content: Place: WTE - 1 One/ Two days. To enable participants to understand the Bosch Test Equipment range and basic troubleshooting. Bosch Authorised Workshop Personnel nominated to handle Test Equipment. Practical Demonstration and Troubleshooting of Workshop Equipment like FIE Test Bench, AE Test Bench, BAT 121, Battery Charger, etc. RTCs. BWSS Two days. To enable participants to become competent in using ESI[tronic] and MSI. Bosch Car Service/ Bosch Authorised Workshop Personnel nominated to handle ESI/ MSI. Practical Demonstration of ESI/ MSI and Practice by Participants, Workshop Reports, Manufacturing Codes, Warranty Terms and Procedures. RTCs/ LTCs.

Course for Defence Personnel

Course Code: Duration: Objective: Participants: Course Content: Place: DEF - 1 Two days. To make participants competent in carrying out quality service on Diesel Fuel Injection Equipment, Auto Electrical and other Bosch Products. Nominated Personnel from Defence Organisations. Working Principle, Repair and Testing of PE Multi-cylinder Pumps, Alternators, Starter Motors and other Bosch Automotive Accessories. RTCs.

Course for OE Customers

Course Code: Duration: Objective: Participants: Course Content: Place: OEM Two days. To provide knowledge on Bosch Products (FIE and AE) and to apprise participants of the latest development in Bosch Products. Managers/ Engineers of OEMs manufacturing Diesel Engines and Vehicles. Design, Working Principle, Test Procedure of Bosch Products (FIE and AE), and Latest Developments. RTCs.

19

Courses for Students and Lecturers

Course Code: Duration: Objective: Participants: Course Content: NEI - 1 One day. To make participants knowledgeable about newer automotive technologies. Final year students from technical educational institutes. Newer Technologies in Diesel and Petrol Injection, Vehicle diagnosis Hardware and Software, and Product Knowledge on Newer Automotive Technologies and Accessories. RTCs/ LTCs. INS One day. To provide knowledge on all Bosch Products, Test and Diagnostic Equipment. Lecturers from Engineering colleges, Polytechnics and other Educational Institutions. Basic knowledge on all Bosch Products, Test and Diagnostic Equipment and Latest Developments. RTCs/ LTCs.

Place: Course Code: Duration: Objective: Participants: Course Content: Place:

20

Courses for Bosch Car Service (BCS)

Course Code: Duration: Objective: Participants: Course Content: BCS - 1 Basic Module Two days. To enable operating level Bosch Car Service Personnel understand the concept and make them competent in Vehicle Diagnosis. Bosch Car Service Technicians. Engine tuning and performance testing Clutch introduction and maintenance Steering and wheel alignment Brake system Suspension system Battery starter and Alternator maintenance Application of KTS Place: Course Code: Duration: Objective: Participants: Course Content: RTCs/ LTCs. BCS - 2 Advanced Module Five days. To make Bosch Car Service Personnel competent in handling business, customer service and technical issues. Bosch Car Service Works Incharge. Industry, service marketing, customer service Introduction to Petrol & Diesel Injection system, Different Generations Diagnosis & Troubleshooting using KTS Practical demonstration on the vehicle Place: BTC (Naganathapura, Bangalore).

21

Course Code: Duration: Objective: Participants: Prerequisite: Course Content:

EEM - 1 (Electricals/ Electronics Module 1) Basic Module Three days. Refreshing the basics of vehicle electrical system & vehicle electronic system. Test possibilities of different systems in the vehicle. Vehicle Mechanic/ Electrician and Automotive Engineer with limited knowledge of the field of Vehicle Electric System/ Electronic System. Knowledge of ESI[tronic] and Bosch Tester Application Ohms law as well as Electro-Technical basics Design and mode of Operation of Electrical Systems Measurement of Electrical Systems with different measurement Devices such as multimeter, ammeter, voltmeter as well as engine tester Understanding the simple Electronic circuits/ Components Practical implementation of theoretical knowledge by measurement exercises directly on the vehicle Understanding and trouble shooting of the wiring system on the Vehicle BTC (Naganathapura, Bangalore), RTCs and LTCs.

Place:

Course Code: Duration: Participants:

BCCE (Body and comfort and convenience electronics) Expert Module Two days. Vehicle mechanic/electrician/motor mechatronic engineer, Automotive engineer/ master mechanic with good knowledge for application of ESI(tronic) & Bosch testing devices KTS. Safe dealing with diagnosis device KTS and ESI[tronic] Installation and functioning of Air Conditioner and components. Components of hydraulic circuits for throttle and expansion valve. Assembly and function of Air-condition control. Components of air conditioner control such as switch, sensor, actuator motor & control unit. Testing of systems in the vehicle with help of ESI[tronic], CAS/ CAS (plus) KTS 550/ 570 Developing diagnostic strategies and detection of diagnosis possibilities primarily in complete system of vehicle. Practical operation in vehicles which are equipped with the above mentioned systems. RTCs and LTCs. CAN (Automotive Networking) Expert Module One day. Understanding the set-up and functions of the networked systems in the vehicle and their testing possibilities. Motor Mechanic with knowledge of Vehicle Electric/ Electronic System/ Automotive Engineer/ Vehicle Electrician Safe dealing with diagnosis device KTS and ESI[tronic]. Principle set-up of CAN database Design and differences of different bus systems CAN protocol set-up Network topology Dos & Donts CAN system Display measurement possibilities using KTS BTC (Naganathapura, Bangalore), RTCs and LTCs

Prerequisite: Course Content:

Place: Course Code: Duration: Objective: Participants: Prerequisite: Course Content:

Place:

22

Course Code: Duration: Objective: Participants: Prerequisite: Course Content:

EPSV (Electronic Power Steering) Advanced Module Two days. Independent execution of diagnostics/ repair and maintenance work in Electronic Power Steering. Vehicle Mechanic/ Electrician/ Automotive Engineer/ Master Mechanic with good knowledge for application of ESI[tronic] & Bosch testing devices KTS. Knowledge of training course ESI[tronic] and Bosch tester application. Basic knowledge on mechanical steering system Basic knowledge on steering geometry Limitation in mechanical steering system Inspection of mechanical components Overview of EPS and components Different EPS modules Self diagnosis on vehicle Trouble / testing of the components using KTS BTC (Naganathapura, Bangalore). MTS&A (Measurement, Testing of Sensors and Actuators) Advanced Module Two days. Basic knowledge base for specific diagnosis of faults in vehicle with main focus on safe and effective handling of various systems in the vehicle. Motor Mechanic/ Motor Electrician/ Motor Mechatronic Engineer/ Automotive Engineer. Knowledge of ESI[tronic] and Bosch tester application Summary of diagnosis with measuring devices such as Multimeter Engine tester KTS Dealing with electrical circuits Sensors & Actuators in following systems MPFI system Common Rail System Ignition (Distributor-type & Distributor-less Electronic) Explanation and evaluation of different output and input signals. Independent operation with ESI[tronic], KTS, multimeter. RTCs and LTCs. EBM (Electrical Battery Management and Electrical On-board Supply Charging Systems) Advanced Module Two days. Independent execution of testing and maintenance work in the vehicle on different systems Motor Mechanic/ Motor Electrician/ Automotive Engineer with good technical knowledge and knowledge of Electronic System. Safe dealing with diagnosis device KTS and ESI[tronic]. Design & mode of operation of following systems Testing of generators Testing of starters New generators Signals from modern generators DFM, W, S Start/ Stop system Testing and Maintenance of Battery Practical work on vehicles which are equipped with the above mentioned systems. Testing of systems in the vehicle with the help of ESI[tronic]. CAS/ CAS (plus) and KTS. BTC (Naganathapura, Bangalore).
23

Place: Course Code: Duration: Objective: Participants: Prerequisite: Course Content:

Place: Course Code: Duration: Objective: Participants: Prerequisite: Course Content:

Place:

Course Code: Duration: Objective: Participants: Prerequisite:

EXS (Exhaust system & after-treatment in passenger car) Expert Module Two days. Independent fault detection of faults in exhaust system in passenger car. Motor Mechanic/ Motor Electrician/ Automobile Engineer knowledge in the field of Gasoline/ Diesel System Technical knowledge of the Basic fundamentals of Gasoline & Diesel Engine Management System. Practical experience in application of ESI[Tronic] as well as in handling KTS is advantageous. Emission norms ( BS IIV) Exhaust gas in the Gasoline & Diesel engine Lamda Sensor & NOx sensor measuring principle, types, testing possibilities, Dos & Donts Possibilities for the after-treatment of exhaust gas in the passenger car Testing of components and systems by applying KTS in connection with ESI (tronic) and Bosch Emission Testing Equipments in the passenger car BTC (Naganathapura, Bangalore), RTCs/ LTCs. CRSD (Diagnosis of Bosch Common Rail Systems passenger car) Advanced Module Two days. Understanding the functions of ECU Self diagnostics of CRS. Specific detection of faults in Bosch passenger Car Common Rail systems. Motor Mechanic/ Motor Electrician/ Automobile Engineer/ Master Mechanic with practical experience in the field of Automotive Diesel System and vehicle diagnostics. Safe dealing with diagnosis device KTS and ESI[tronic]. Technical knowledge of Common Rail system. Design and functions of different Bosch Common Rail Generations. Sequence and operating modes of diagnosis software as well as individual test functions with Bosch Diagnostic tester KTS. Diagnostic strategies and specific detection of faults as well as fault rectification Testing of Low-pressure/ High-pressure circuit using Bosch Diesel sets 1 & 3. Testing of Back flow using Injector return flow measuring device. BTC (Naganathapura, Bangalore) & RTCs. VM (Vehicle Mechanic - Passenger Car) Advanced Module Four days. Fault detection and rectification of faults in suspension, Steering geometry, Clutch system, different sub-systems (cooling, intake, exhaust, lubrication & main components) of the engine. Basic training for Motor Mechanic/ Automobile Engineer Design and mode of operation of individual assemblies of engine mechanics, like crankshaft drive, valve train, variable valve control, engine lubrication and engine cooling. Evaluation of engine mechanics by suitable testing procedure especially compression test, pressure loss test . Repair and diagnostics of individual components of clutch (e.g. dual-mass flywheel and self-adjusting clutch) Diagnostics and adjustment of modern chassis and its individual components such as shock absorber, suspension and assisted Steering systems. Requirements for wheel and tyre, wheel balancing Introduction to TPMS (Tyre Pressure Monitoring System) Practical work on vehicles BTC (Naganathapura, Bangalore).

Course Content:

Place: Course Code: Duration: Objective: Participants: Prerequisite: Course Content:

Place: Course Code: Duration: Objective:

Participants: Course Content:

Place:

24

Course Code: Duration: Objective: Participants: Course Content:

BRM (Mechanical Braking) Basic Module Two days. Understanding the Basic mechanical braking system, components, inspecting and testing. Basic training for Motor Mechanic/ Automobile Engineer Fundamentals of braking system Different type of brake system (mechanical, hydraulic, air) Different brake system circuits Familiarization of brake system components and its function Inspection and testing of the main components of the brake system Removal & replacement method for brake pad, cylinders, etc. Measurements: Wheel hub, brake disc, wear test, pressure test Classification of brake fluids and importance Brake bleeding Brake pedal setting Troubleshooting instruction BTC (Naganathapura, Bangalore), RTCs and LTCs. BRE (Electronic Braking system) Advanced Module Two days. Understanding the Anti-lock braking system, components, inspection, troubleshooting & testing. Basic training for Motor Mechanic/ Automobile Engineer Limitations of mechanical braking system Introduction & advantage of ABS Understanding braking force, co-efficient of friction Understanding the braking force in different road conditions Location and function ABS components Understanding of different type of wheel speed sensors Function of Bosch ABS system: ABS 2S, ABS 2E, ABS 5.0, ABS 8.0 in the areas of hydraulics and electricals Understanding the Wiring diagram of ABS ABS: Self diagnosis & SIS on car using KTS, guided troubleshooting ABS bleeding Repair & Safety instructions Introduction to TCS/ ESP BTC (Naganathapura, Bangalore).

Place: Course Code: Duration: Objective: Participants: Course Content:

Place:

25

Course Code: Duration: Participants:

SRS (Supplementary Restraint System) One day. Vehicle mechanic/ Electrician/ Motor mechatronic engineer. Automotive engineer/ Master mechanic with good knowledge on application of ESI (tronic) & Bosch testing devices (KTS). Safe dealing with diagnosis device KTS and ESI[tronic] Safety specifications and workplace instructions dealing with airbag. Overview of Bosch airbag systems. Assembly and functioning of passive safety systems. Airbag module (driver, passenger window pad), sensor technology of restraint systems. Additional functions such as roll-over protection, safety battery terminal, active head restraint, diagnostics and repair possibilities with ESI[tronic] and KTS. Testing of systems in the vehicle with help of ESI[tronic], CAS/CAS (plus) KTS 550/570 Developing diagnostic strategies and detection of diagnosis possibilities primarily in complete system of vehicle. Practical operation in vehicles which are equipped with the above mentioned systems.

Pre requisite: Course Content:

Place: Course Code: Duration: Objective: Participants: Course Contents: Place: Course Code: Duration: Objective: Participants: Course Contents: Place:

BTC (Naganathapura, Bangalore) BP One day. To make participants competent in dealing with Bosch Brake Pads. BCS Personnel, Bosch Authorised Product Stockists, Bosch Authorised Stockists dealing in Brake Pads. Working principle of Disc Brakes and FABs of Bosch Brake Pads. RTCs/ LTCs. DG Two days. To make participants competent in handling Advanced Diagnostic Equipment like KTS, BAT and other Test Equipment. Personnel employed with Bosch Authorised Workshops and BCS. Diagnosis on vehicles using KTS, BAT and other Test Equipment. RTCs and LTCs.

26

Training Centres

Parag Kavthekar North

Tejas Patel East M.C. Pant West

T. Nagaraj Venkatesha G. G. Bangalore Bangalore

Ajay Kumar M. Bangalore

K. Aravind South

BTC

- Bosch Training Centre Naganathapura, Bangalore.

RTCs - New Delhi, Kolkata, Mumbai and Chennai. LTCs - Chandigarh, Jaipur, Lucknow, Guwahati, Raipur, Indore, Ahmedabad, Ernakulam, Hubli and Secanderabad.

27

Accommodation and Transport Bangalore

At Hosur Road between Bosch, Adugodi and Naganathapura Plant 1. Krishna Rooms No. 77, Hosur Main Road Near Ayyappa Temple, Madiwala Bangalore - 560 068 Ph.: (080) 2552 5723/24/25 *Tariff: Rs. 995 + Tax (Double, Non-AC), Rs. 1650 + Tax (Double, AC) Other hotels in the city: 1. Brindavan Hotel M.G. Road Bangalore - 560 001 Ph.: (080) 2558 4000 **Tariff: Rs. 624 (Single, Non-AC), Rs. 780 (Double, Non-AC), Rs. 1116 (Single, AC), Rs. 2475 (Double, AC) 2. Hotel Gautam 17, Museum Road Bangalore - 560 001 Ph.: (080) 2558 8764 **Tariff: Rs. 600 (Single, Non-AC), Rs. 800 (Double, Non-AC) 3. Hotel Harsha Shivajinagar Bangalore - 560 051 Ph.: (080) 2286 5566 **Tariff: Rs. 4500 (Single, AC Deluxe), Rs. 5000 (Double, AC Deluxe) 4. Hotel Prashanth 21, East Tank Bund Road Bangalore - 560 009 Ph.: (080) 2287 4041 *Tariff: Rs. 450 + Tax (Single, Non-AC), Rs. 600 + Tax (Double, Non-AC), Rs. 850 + Tax (Double, AC) 5. Sri Ramakrishna Lodge Subedar Chatram Road Bangalore - 560 009 Ph.: (080) 2226 3042 **Tariff: Rs. 310 (Single, Non-AC), Rs. 590 (Double, Non-AC) 6. Woodlands Hotel 5, Sampangi Tank Road Bangalore - 560 025 Ph.: (080) 2222 5111 *Tariff: Rs. 1900 Rs. 2200 Rs. 3100 Rs. 3000 Rs. 3900 + Tax (Double, Non-AC), + Tax (Non-AC, Deluxe), + Tax (AC, Deluxe), (Executive Room), + Tax (AC Cottages) 8. Hotel Sunflower 129, Brigade Road Bangalore - 560 025 Ph.: (080) 2557 1945 **Tariff: Rs. 700 (Double, Non-AC), Rs. 1200 (Double, AC) Transportation There are frequent bus services at intervals of 30 min. from all the three major bus stations in Bangalore to Nagnathapura. Given below is a list of bus numbers from each bus station. From K.R. Market Bus No. 346J From Majestic (Kempe Gowda Bus Station/ Central Bus Station) Bus No. 347F From Shivajinagar Bus No. 347G Note: The hotel rates mentioned are only indicative. Tariffs may vary. * Rates exclusive of taxes ** Rates inclusive of taxes

7. Hotel Ajantha 22-A, M.G. Road Bangalore - 560 001 Ph.: (080) 2558 4321 **Tariff: Rs. 510 (Single, Non-AC), Rs. 795 (Double, Non-AC), Rs. 1230 (Deluxe Room), Rs. 1400 (Cottage Room)

Bosch Limited Bosch Training Centre Naganathapura Plant Electronic City P.O. Post Box No. 6887, Bangalore - 560 100 Ph.: (080) 4103 5541/2/3/0 Telefax: (080) 2852 1239/2852 1608 E-mail: [email protected] [email protected] [email protected]

28

North Region

Accommodation New Delhi

All the participants are advised to arrange their own accommodation as required. Given below is a list of hotels:
1. Hotel Bhagirath Palace Opp. Red Fort Chandni Chowk New Delhi - 110 006 Ph.: (011) 2386 6223/2386 6723 2. Wood Inn Hotel 8, Local Shopping Centre Kirti Nagar New Delhi - 110 015 Ph.: (011) 2543 8500/2543 9136 3. Vivek Hotel 1534 - 50, Main Bazar, Pahar Ganj New Delhi - 110 055 Ph.: (011) 5154 1435/5154 1436 4. Hotel Regal Shyama Prasad Mukherjee Marg New Delhi - 110 006 Ph.: (011) 2394 3999/2397 9115 5. Hotel Tourist Ram Nagar, Pahar Ganj New Delhi - 110 055 Ph.: (011) 2361 0334-340 6. Rail Yatri Nivas New Delhi Railway Station New Delhi - 110 002 Ph.: (011) 2323 3484

Bosch Limited Bosch Training Centre C/o Sunehri Exports, Plot No. B-1/ E24 Mohan Co-operative Industrial Estate, Mathura Road, New Delhi - 110 044 Mobile: 098713 07355 E-mail: [email protected]

29

Accommodation Chandigarh
All the participants are advised to arrange their own accommodation as required. Given below is a list of hotels:
1. Hotel Deep Palace SCF - 248, Motor Market Manimazra, Chandigarh Ph.: (0172) 273 1973 Tariff: Rs. 150 (Standard Single, Air Cooled), Rs. 200 (Standard Double, Air Cooled), Rs. 350 (AC) 2. Hotel Chander Palace SCO - 453 - 454 Near Dhillon Complex Motor Market, Manimazra Chandigarh Ph.: (0172) 273 4152 Tariff: Standard AC Room: Rs. 300 (Twin-sharing basis) Rs. 400 (Single, Deluxe) 3. Hotel Indian Palace SCF - 13 - 14, Motor Market Manimazra, Chandigarh Ph.: (0172) 273 9994 Tariff: Rs. 350 (Single Standard, Air Cooled), Rs. 450 (Double, Standard AC), Rs. 650 (Double, Deluxe AC) Note: The hotel rates mentioned are only indicative and exclusive of taxes. Tariffs may vary.

Bosch Limited Local Training Centre (LTC) C/o Jaeco Diesels SCF 344-345 New Motor Market, Manimajra Chandigarh - 160 101

30

Accommodation Jaipur
All the participants are advised to arrange their own accommodation as required. Given below is a recommended hotel:

1. Hotel Broadways Transport Nagar, Agra Road, Jaipur Ph.: (0141) 511 2010/11, 264 1275 Tariff: Rs. 300 (Twin-sharing basis) Note: The hotel rates mentioned are only indicative and exclusive of taxes. Tariffs may vary.

Bosch Limited Local Training Centre (LTC) C/o Arora Diesels Akash Deep Building A-5, Transport Nagar Jaipur - 302 004

31

Accommodation Lucknow
All the participants are advised to arrange their own accommodation as required. Given below is a list of hotels:
1. Hotel Aadharshila VIP Road, Alambagh, Lucknow Ph.: (0522) 246 0550 Tariff: Rs. 550 (Standard), Rs. 650 (Semi Deluxe), Rs. 850 (AC, Deluxe) 2. Hotel Rangoli Near Hardoi Bus Stand, Charbagh Lucknow Ph.: (0522) 263 5926/263 5902/263 5293 Tariff: Rs. 250 (Air Cooled, Single Bed), Rs. 450 (Air Cooled, Double Bed), Rs. 650 (Single Bed, AC Deluxe), Rs. 90 (Dormitory) 3. Hotel Pooja Charbagh, Lucknow Ph.: (0522) 245 7525 Tariff: Rs. 200 (Single Bed, Attached Bathroom), Rs. 250 (Double Bed, Attached Bathroom) Note: The hotel rates mentioned are only indicative and exclusive of taxes. Tariffs may vary.

Bosch Limited Local Training Centre (LTC) C/o Raman Diesels D-1, Transport Nagar Lucknow - 226 012

32

South Region

Accommodation Chennai
All the participants are advised to arrange their own accommodation as required. Given below is a list of hotels:
1. Sri Ramakrishna Nivas No. 1, Woods Road, Annasalai, Chennai - 600 002 Ph.: (044) 2860 3329 2860 2154 2. Regency Golden Sun Hotel No. 1, Hanumanth Rao Street T. Nagar, Chennai - 600 017 Ph.: (044) 2828 2772 3. Rohini International No. 67, G.N. Chetty Road, T. Nagar Chennai - 600 017 4. Royal Guest House Old No. 26, New No. 4, Boobegam Street, Chennai - 600 002 Ph.: (044) 2861 1044, 45 Tariff: Rs. 250 (Single room) Rs. 350 (Double room) 5. Sarvana Lodge Next to Hotel Sarvana Bhavan, T. Nagar, Chennai - 600 017 Tariff: Rs. 280 (Single room) Rs. 350 (Double room) Note: The hotel rates mentioned are only indicative and exclusive of taxes. Tariffs may vary.

Bosch Limited Bosch Training Centre Blossom Centre Old No. 27, New No. 30, North Boag Road T. Nagar, Chennai - 600 017 Ph.: (044) 2815 3916/2815 3917 Mobile: 091766 40990 E-mail: [email protected]

33

Accommodation Hubli
All the participants are advised to arrange their own accommodation as required. Given below is a list of hotels:
1. The Hans Hotel P.B. Road, Vidyanagar Hubli - 580 031 Ph.: (0836) 237 4770 2. Hotel Canara P.B. Road, Hosur Hubli - 590 021 Ph.: (0836) 237 2561 3. Hotel Chalukya Club Road Hubli - 590 021 Ph.: (0836) 235 4234 4. Hotel Ambesh Opp. Mirjankar Petrol Pump P.B. Road Hubli - 590 021 Ph.: (0836) 227 2378 5. Hotel Ayodya Opp. Old Bus Stand Hubli - 590 021 Ph.: (0836) 235 1951

Bosch Limited Local Training Centre (LTC) C/o Manickbagh Diesels Baddi Building Unkal Cross, P.B. Road Hubli - 580 031

34

Accommodation Ernakulam
Given below are the list of few hotels:

1. City Gates Residency Near IOC Petrol Pump, Muttom. Ph.: (0484) 262 8387 Tariff: Rs. 300 (Single room) Rs. 400 (Double room) 2. M.I.K Tourist Home H.M.T Junction, Kalamassery. Ph.: (0484) 255 5010/ 646 1201 Tariff: Rs. 400 (Single room) Rs. 500 (Double room) Note: The hotel rates mentioned are only indicative and exclusive of taxes. Tariffs may vary.

Bosch Limited Local Training Centre (LTC) C/o Surya Diesels, Muttom, Thaikattukara P.O., Opposite Indian Oil Petrol Pump, Aluva-683 106 Ernakulam Ph.: (0484) 2626 381/ 2626 382 E-mail: [email protected]

35

Accommodation Secunderabad
All the participants are advised to arrange their own accommodation as required. Given below is a list of hotels:
1. Rajadhani Lodge Plot No. CFZ/S-13A & B Auto Nagar Vijayawada Highway Hyderabad - 500 070 Ph.: (040) 2412 3434 2. Taj Mahal Hotel Patny Centre Secunderabad - 500 003 Ph.: (040) 2781 2106 3. Hotel Basera S.D. Road Secunderabad - 500 004 Ph.: (040) 2770 3200

Bosch Limited Local Training Centre (LTC) C/o Secunderabad Engg. Corp. Plot No. 6, Block No. 11 Autonagar, Hyderabad - 500 070

36

East Region

Accommodation Kolkata
All the participants are advised to arrange their own accommodation as required. Given below is a recommended hotel:
1. Hotel Capella 49, R.A. Kidwai Road, Kolkata - 700 016 Ph.: (033) 2229 4365/224 98921 Tariff: Rs. 395 (Single), Rs. 450 (Single room, Twin-sharing basis), Rs. 775 (Double room, Shared by 4) Note: The hotel rates mentioned are only indicative and exclusive of taxes. Tariffs may vary.

Bosch Limited Bosch Training Centre Post Box No. 9044, 91-A, Park Street, Kolkata - 700 016 Ph.: (033) 2217 2144/2217 5222 Mobile: 097487 64392 E-mail: [email protected]

37

Accommodation Guwahati
All the participants are advised to arrange their own accommodation as required. Given below is a recommended hotel:
1. Hotel Shyam Sarover Near Ram Mandir, A.T. Road Guwahati - 781 001 Ph.: (0361) 251 1577/ 254 1611 Tariff: Rs. 100 2. Mayur Hotel Paltan Bazar, Guwahati-781008 Opp. ASTC Bus Stand Ph.: (0361) 2734855/56/57/58/59/60/61 (0361) 2739603/20/25 Tariff: Rs. 160 (Single Economy) Rs. 200 (Single Standard) Rs. 290 (Single Deluxe) Rs. 600 (Single Super Deluxe) Rs. 299 (Double Economy) Rs. 400 (Double Deluxe) Rs. 700 (Double Super Deluxe) Rs. 800 (Double Special Deluxe) Rs. 900 (Double Executive) Rs. 1200 (Double Premium) Rs. 1000 (Junior Suite) Rs. 1300 (Semi Suite) 3. Hotel Eden Opp. Bengali H. S. School, G.S. Road, Paltan Bazar, Guwahati -781008 Ph.: (0361) 2739578, 2639963 Tariff: Rs. 300 (Single Deluxe) Rs. 550 (Single Deluxe) Rs. 650 (Single Deluxe/ AC) Rs. 1000 (Double Deluxe/ AC) 4. Hotel Rialto GNB Road, Paltan Bazar, Guwahati - 781001 Ph.: (0361) 2131210, 2734450 Tariff: Rs. 1800 (Executive) Rs. 1500 (Deluxe) Rs. 1000 (Standard) 5. Hotel Hornbill Md Shah Road, Paltan Bazar, Guwahati - 781008 Ph.: (0361) 2735401 Tariff: Rs. 1400 (Single Deluxe) & Rs. 1600 (Double Deluxe) Rs. 1600 (Single Luxury) & Rs. 2000 (Double Luxury) Rs. 2200 (Single Executive) & Rs. 2600 (Double Executive) Rs. 3600 (S Hornbill Suit) & Rs. 3600 (D Hornbill Suite) Rs. 9500 (S President Suit) & Rs. 9500 (D President Suite) Note: The hotel rates mentioned are only indicative and exclusive of taxes. Tariffs may vary.

Bosch Limited Local Training Centre (LTC) C/o Guwahati Diesels A.T. Road Guwahati - 781 001

38

Accommodation Raipur
All the participants are advised to arrange their own accommodation as required. Given below is a list of hotels:
1. Gass Memorial Centre Opp. Raipur Diesels Near Jai Stambh Chowk K.K. Road, Moudhapara, Raipur Ph.: (0771) 235 6532 Tariff: Rs. 145 (Single), Rs. 210 (Double) 2. Hotel Usabh Palace K.K. Road Near Gujarati School, Raipur Ph.: (0771) 503 0824 Tariff: Rs. 250 (Single), Rs. 150 (Double), Rs. 100 (Dormitory) Note: The hotel rates mentioned are only indicative and exclusive of taxes. Tariffs may vary.

Bosch Limited Local Training Centre (LTC) C/o Raipur Diesels Krishna Kumar Road Raipur - 492 001

39

West Region

Accommodation Mumbai
All the participants are advised to arrange their own accommodation as required. Given below is a list of hotels:
1. Shantidoot Hotel Dr. Ambedkar Road Opp. Hindmata Cinema Dadar (E), Mumbai - 400 014 Ph.: (022) 2416 4923-4 2. Hotel Midtown Pritam 20-B, Dharamputra Pritam Estates Dadar (E), Mumbai - 400 014 Ph.: (022) 2414 5555/2414 5959 3. Hotel Regency 73, Napean Sea Road Mumbai - 400 006 Ph.: (022) 2369 7700/2363 0002-3 4. Hotel Windsor 10, Kumpta Street Ballard Estate Fort Mumbai - 400 038 Ph.: (022) 2261 3071/2261 8321-7 5. Marina Guest House 13, Soona Mahal 143, Marine Drive Mumbai - 400 020 Ph.: (022) 2282 1924 6. Mehra Resorts 79, Dr. Annie Besant Road Worli, Mumbai - 400 018 Ph.: (022) 2492 5280-1 7. Ritz Hotel Pvt. Ltd. 5, Jamshedji Tata Road 3, Churchgate, Mumbai - 400 020 Ph.: (022) 2285 0500, 2283 7623 8. Sea Green Hotel 145, Marine Drive Mumbai - 400 020 Ph.: (022) 2282 2294 9. Shalimar Hotel Pvt. Ltd. August Kranti Marg Mumbai - 400 036 Ph.: (022) 5664 1000 10. Hotel Sunbeam Manoj Mandir Apartments Dr. E. Moses Road Adjacent to Geeta Cinema Worli Naka, Mumbai - 400 018 Ph.: (022) 2492 9340 11. Hotel Hill View Opp. Campa Cola Factory B.G. Kher Road Worli Naka, Mumbai - 400 018 Ph.: (022) 2493 5630/2496 1858 12. Hotel Rahat Palace Dr. E. Moses Road Next to Geeta Cinema Worli Naka, Mumbai - 400 018 Ph.: (022) 2496 4411-7

Bosch Limited Bosch Training Centre 79, Dr. Annie Besant Road Worli, Mumbai - 400 018 Ph.: (022) 2493 2071-4, 2493 0452 Mobile: 99875 64775 E-mail: [email protected]

40

Accommodation Ahmedabad
All the participants are advised to arrange their own accommodation as required. Given below is a list of hotels:
1. Hotel Moni Opp. Shakti Estate Narol Isanpur Road Ahmedabad Tariff: Rs. 300 (Single), Rs. 400 (Double) 2. Hotel Prestige Opp. Sai Diesels, Narol Cross Road Near Vijay Transport, Ahmedabad Tariff: Rs. 250 (Single), Rs. 350 (Double) 3. Hotel Ellis Bridge, Opp.Town Hall, Ashram Road, Ahemadabad Ph.: 098240 26530/ 079 2657 5811 Tariff: Rs. 300 to 500 (Single), Rs. 400 to 625 (Double) A/C Rooms at Extra Cost 4. Hotel Atithi Opp. Kasturi Dining Hall, Paldi, Ahemadabad Ph.: 098250 39809/ 079 2658 2912 Tariff: Rs. 200 to 300 (Single), Rs. 300 to 400 (Double) 2. Hotel Kapadiya Near, V. S. Hospital, Opp. Mahak and Building, Ellis Bridge Ph.: 093270 07923/ 079 2657 9571 Tariff: Rs. 300 (Single), Rs. 400 (Double) Rs. 100 (Dormitory) 2. Hotel Gurukrupa Ellis Bridge, Behind Town Hall, Ashram Road Ph.: 079 2657 7174 Tariff: Rs. 200 (Single), Rs. 250 (Double) Note: The hotel rates mentioned are only indicative and exclusive of taxes. Tariffs may vary.

Bosch Limited Local Training Centre (LTC) C/o Sai Diesel Service 2/A, Geetabhavan Opp. Vijay Transport Near Kashiram Textile Narol, Ahmedabad - 380 005

41

Accommodation Indore
All the participants are advised to arrange their own accommodation as required. Given below is a list of hotels:
1. Hotel Mayur 39, Chhoti Gwal Toli Opp. Madhu Milan Cinema Indore Ph.: (0731) 270 5786/270 6786 2. Hotel Parag Regency Near Kibe Compound Kamala Nehru School Road Indore Ph.: (0731) 504 2276 3. Hotel Uday Palace 7, Kibe Compound Near Madhu Milan Talkies Indore Ph.: (0731) 270 4088 4. Hotel Poonam Chhoti Gwal Toli Near Patel Statue Indore Ph.: (0731) 252 2250/252 2273 5. Hotel Crown Opp. Sarwate Bus Stand Indore Ph.: (0731) 252 2250/252 2273 6. Hotel New Sunder 17/2, South Tukoganj Indore Ph.: (0731) 252 9051/252 0128 7. Hotel Galaxy Tower Chouraha Indore Ph.: (0731) 247 2602/244 0206 Note: The hotel rates mentioned are only indicative and exclusive of taxes. Tariffs may vary.

Bosch Limited Local Training Centre (LTC) C/o Ujjain Diesels Pvt. Ltd. 118 - A, Transport Nagar Indore - 452 001

42

Eligibility and Enrolment Procedure

The Bosch Training Centre
Your partner in educating your specialists Qualified, experienced and competent personnel are essential for handling service of Bosch products. Send your personnel for training and further education to the Bosch Training Centre. Ensure that you remain competitive in the future. Plan now for your future requirements. Note: Training Fee will be debited to Network directly by Bosch Limited (DD not required). For External customers like OEMs, OECDs, STUs, Defence and Educational Institutions, Application Form to be accompanied with DD. Eligibility f Only those candidates who are employed with and sponsored by Bosch Authorised Representatives, Original Equipment Customers and their Dealers, State Transport Undertakings, Defence Organisations, Government Departments, ITI, Diploma College, Engineering Colleges, JOC Colleges, etc., are normally considered eligible for training. f Candidates should have adequate working knowledge of the medium of instruction. The course should be selected depending upon the proficiency of the candidate in the particular language. Fee f For Courses/ Seminars at BTC: Rs. 900 per day/ person + taxes (10.3 percent) f For Courses/ Seminars at LTC: Rs. 500 per day/ person + taxes (10.3 percent) How to apply? Bosch Training Courses are offered at Bangalore, Chennai, Ernakulam Kolkata, Mumbai, New Delhi, Ahmedabad, Chandigarh, Guwahati, Indore, Jaipur, Lucknow, Raipur, Secunderabad and Hubli. Candidates may apply at any Training Centre of their choice. Application should be made on the prescribed application form, giving the required particulars to the BTC, or the respective RTCs/ LTCs of the region. Bangalore: Bosch Training Centre Bosch Limited Naganathapura Plant, Electronic City P.O. Post Box No. 6887, Bangalore - 560 100 Ph.: (080) 4103 5541/ 42/ 43/ 40. Fax: (080) 2852 1608/ 2852 1239 E-mail: [email protected], [email protected], [email protected] For RTC/LTCs at Chennai, Ernakulam, Hubli and Secunderabad, apply to: Chennai: Regional Trainer Bosch Limited Blossom Centre Old No. 27, New No. 30, North Boag Road T. Nagar, Chennai - 600 017 Ph.: (044) 2815 3916/ 2815 3917 Mobile: 091766 40990 E-mail: [email protected] For RTC/LTCs at Kolkata, Guwahati and Raipur apply to: Kolkata: Regional Trainer Bosch Limited Post Box No. 9044 91-A, Park Street, Kolkata - 700 016 Ph.: (033) 2217 2144/ 2226 4570. Fax: (033) 2249 7482 Mobile: 097487 64392 E-mail: [email protected]

43

For RTC/LTCs at Mumbai, Ahmedabad and Indore, apply to: Mumbai: Regional Trainer Bosch Limited 79, Dr. Annie Besant Road, Worli Mumbai - 400 018 Ph.: (022) 2493 2071/ 2497 2075. Fax: (022) 2497 3924 Mobile: 099875 64775 E-mail: [email protected] For RTC/LTCs at New Delhi, Chandigarh, Jaipur and Lucknow, apply to: New Delhi: Regional Trainer Bosch Limited C/o Sunehri Exports, Plot No. B1/E24, Mohan Co-operative Industrial Estate Mathura Road, New Delhi - 110 044 Mobile: 098713 07355 E-mail: [email protected] How to apply? Working Hours: RTCs/ LTCs: Monday to Friday 1000 to 1700 hr. BTC: Monday to Friday 0900 to 1600 hr. f Candidates are required to make their own arrangements for lodging, boarding and transport. Some hotels are listed in this brochure. If any assistance is required, candidates may approach the respective Training Centres. f In order to maintain the quality of training (during practical demonstration classes) the number of candidates for each course is restricted to 12. f Seats are reserved on a first-come-first-served basis. Candidates are to be deputed only after receipt of the confirmation from Bosch. f Candidates reporting for a course without our confirmation will be accommodated only if there is a vacancy. f Candidates attending the course should bring a letter of introduction from the sponsoring organisation. f Although precautions are taken for the safety of the trainees, the company assumes no responsibility for any injury caused to them or loss of personal articles during the training period. f No refund of the Seminar/ Course fee for non-participation will be made, nor will it be adjusted for another Seminar/Course. f Photography is prohibited within the factory premises. f Applications should reach the Training Centres at least four weeks in advance of the required Seminar/ Course. f Applicants should not bring any laptops, mobiles with cameras, floppy diskettes, CDs/ DVDs, video cameras, pen drives or memory sticks. f Participants shall be held responsible for the loss of any Bosch property from the Training Centres during the Training courses.

44

Notes ___________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________ __________________________________________________________________________________________________________________________
45

Bosch Limited, Bosch Training Centre, Automotive Aftermarket, Naganathapura Plant, Electronic City P.O., Post Box No. 6887, Bangalore - 560 100. Ph: (080) 4103 5540/ 41/ 42/ 43. Fax: (080) 2852 1608/ 2852 1239. www.boschindia.com

814|2012|AET|Cal